Modify javadoc source code

Hello :-)
I would like to use javadoc to read comments inside the methods, but i know there is no such thing in javadoc now so i am thinking either to implement this feature myself or find other documentation generators to use. Does anyone has any good ideas on how to do it???
Have anyone done such thing already? I know i can get javadoc source code from tools.jar, butt confused on how to modify it and build it or making the jar on that... Thanks a lot....

Hi,
Check the below note 872892 gives you step by step procedure of how to do the changes.
The below links will be of help to understand the concepts:
http://help.sap.com/saphelp_nw04/helpdata/en/1c/ccabc5ef780f4cb5be6b9624b077cd/frameset.htm
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417400%29ID0042988250DB11232412343044179198End?blog=/pub/wlg/7177
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0b1f2c8-54e0-2910-9ab3-b85f15093655?prtmode=navigate
http://help.sap.com/saphelp_nw04/helpdata/en/4e/a5214174abef23e10000000a155106/content.htm
Cheers-
Pramod

Similar Messages

Download JavaDoc source code

Need to download the Javadoc source code as against the class files.
Any pointers to that?

Find the SCSL - Sun Community Source License program. The source code for the entire JDK is in that.

Javadoc Source-Code Download?

Hello,
does anyone know where I can download Javadocs
sources? I searched the forum but only found an old
link which does not work anymore.
Any hint is welcome.
Greetings
Stefan

Hi,
Well... some months ago, an executive from some company (http://www.omondo.com more precisely) had told me that Sun did not provide Javadoc sources anymore. I have all reasons to believe him, as they are pretty much involved in major Java development stuff...
By the way, DocFlex/Javadoc (http://www.filigris.com/products/docflex_javadoc) is never going to follow that fate. Its templates, which produce the entire Java documentation, will always be open because it is the key feature of the product itself.
Regards,
Leonid Rudy
http://www.docflex.com

Modifying library source code

I need access to the code internal to the Swing library. I've written a complex program that is exhibiting some strange behavior, and the best way at this point to debug it is to insert some trace statements into some of the repaint routines so I can see what it's trying to do.
I've already downloaded the sources from the JDK. How do I generate an executable that uses a modified version of one or more Swing classes? I'm developing with Eclipse.

jschell wrote:
So what do you think that the second will do that the first will not?It's reasonable of you to ask. And I hope my answers appear reasonable to you. I welcome your input. If you think there are other things I should be considering, tell me, but please don't flame me.
There are two factors that are pushing me to this approach. The first is that the bug appears on the computer of another user, but I'm unable to duplicate it on my own machine. This user has been very cooperative in helping me work on the problem. The approach that has worked so far is that I've modified the program to put trace info into a circular buffer, and after the bug hits the user emails me the contents of the buffer.
I've already had one session where I use remote desktop software to watch the program running on the user's computer. It's cumbersome, but I can go back to it if necessary. If I were to rely on using Eclipse to trace into the program, it would mean I would need to install an entire development environment onto the user's computer. It's possible, but I'd like to avoid it if I can.
The other factor is the nature of the bug itself. The program relies on multi-threading to analyze and display audio in real time. The bug never shows up initially -- it usually needs about two or three minutes of continuous operation before it shows up. So far I don't have a clue about what triggers the transition from normal operation to bad. What I've determined so far is that the AWT-Event-Queue is getting backed up. Events are being added to the queue faster than they can be dealt with. When things get bad, it may take several seconds for the program to respond to a mouse click. By dumping stack traces at intervals, I find the program is spending most if its time inside the RepaintManager. Now that I have the tools, I'd like RepaintManager to report what it thinks needs repainting. RepaintManager gets called thousands of times, and I don't know at this point if I simply breakpoint once whether or not I'll find anything relevant. If I don't, I'll have to start the process all over again.
I realize the second factor is not as strong as the first. I could probably find a way to use the Eclipse debugger. But if I can rely on trace statements, I don't know of a strong reason not to.

How do I clear permissions for SCC VIs? I am trying to modify the source code.

I'm trying to use SCC protected VIs in a new project, but original permission has been lost. I'm using Labview 7.0 that does not have the SCC option.

Hello,
I'm not sure I understand the question... What are "SCC Protected VIs?" And where are you looking for an SCC option in LV 7.0?
Sincerely,
Sean C.

Unable to edit WebDynpro source code after import from NWDI Track

Hi !
I am facing an odd issue when trying to modify the source code in a web dynpro that is in a Track.
This is what happens:
I create the project from Inactive DCs
I double click in the component controller (for example) and try to enter a line of code
A pop ups appears saying that in order to modify the file I have to check it out and to create an activity
The window to create a new activity appears, and I create the new activity
I am informed that the file to be edited will be included in the activity
--- Until now everything is normal ---
A try again to type something inside the source code.. and NOTHING happens, is as if my keyboard was broken.
After trying 1000 things I found a workaround that is:
Open the DTR perspective in NWDS, go to inactive -- <project>.. gen_wdp , ( and in gen_wdp right click, edit --> subfolder tree).
After doing that I am able to edit the source code... this is very strange! I mean, I never had this problem before..
somebody has a hint ?
Best regards!
Marco.

hi,
I am able to edit the code is one of the DCs in the same track and I am unable to do so in the other. The error that I see in a popup while trying to edit the code is :
The operation can only be performed if the following objects are writable:The project is not in the repository, but there are some read-only files
Component Controller com.aramco.sao.had.hmd.dcsa.newagrcomp.NewAgrComp
Read-only: D:\Users\bohramx\Desktop\nwds-extsoa-7.3-SP02-PAT0001-win32\eclipse\workspace.jdi\1\DCs\aramco.com\it\ca\esales\web\newagrmnt\_comp\src\packages\com\aramco\sao\had\hmd\dcsa\newagrcomp\NewAgrComp.wdcontroller
Please suggest how to checkout files for edit.
Thanks!
seventyros

HotSpot source code explanation

Hi!!
I am new in this, so I will try to be as clear as I am able :)
I need to modify the source code of the hotspot, and I do not find any information about the meaning of each file in the directory tree. I have tried to do it by myself, but it is a bit complicated for me ;P
Any suggestion, WP, idea or anything about the meaning or the content of each file (as many as you can) will be of a huge help :D:D:D
Thx!! :D:D:D:D

Hi!!!
I am doing a project about improving certains features in the JVM ;) so I need to modify the source code of the hotspot :)
Thx!! :D

Is there a way to decorelate annotations from the source code?

sorry : the title of the question may sound bizarre but , not being a native speaker, I do not know how to precisely state my problem.
I'll try:
an example: suppose you want to annotate your code with annotation such as @MightBeNull (a fictitious annotation) to mark a field as being potentially null.
this annotation is going to be used by annotation processor X and is specified by (fictitious) library org.something.staticcheck ...
Now if a new (and better) tool appears for the same purpose you'll have to change your code. At compile time your code is dependent on a precise library (and a set of precise tools for annotation processing).
I my dreams I would like a way to write my own annotations and configure an adapter that redirects to the precise library that I choose at given moment.
For sure that cannot be so easy since adaptations could not fit easily (but let's forget it for the moment).
This seems impossible ... or it is?
( a better way could be to annotate not the source code itself but a separate description of its features that could be annotated independently)

Sorry bruce I am a bit slow: I don't understand your suggestion.
if I have a code like that:
import org.staticcheck.annotations.MightBeNull ;
public class Thing {
       @MighBeNull private Something relation;
}my code is dependent on library "org.staticcheck.annotations".
then afterwards if I change for another tool that uses annotation
    com.newprovider.annotations.CouldBeNullI am obliged to modify my source code!
I daresay I am tempted by hacks such as :
import com.mybusiness.annotations.MetaAnnotation ;
public class Thing {
       @MetaAnnotation("null_possible") private Something relation;
}and then perform some precompile wizardry (thru a preprocessor ;-( or tricky annotation processor
that transforms the source code). But it could turn out ugly/clumsy ....
that means that there will be a resource for describing a "translation" from the MetaAnnotation to the
real thing needed at a precise moment.
So my question is: has someone found a way to do that elegantly? (btw I can think of many more reasons for this decorrelation between
the source code and its annotations).

Hotspot source code

Hi,
We want to make a comparison between the source code of the Hotspot JVM v1.4.2 and the source code of Hotspot v1.6 (to analyze the system calls which are made by Hotspot under Linux when using the threading API).
However, the former seems not to be available since the JVM became Open Source after the release of the 1.4.2 version...
Is it possible to download the sources of Hotspot v1.4.2 somewhere? Is it possible/necessary to ask Sun to obtain these sources?
Thank you in advance,
Fred

Hi!!!
I am doing a project about improving certains features in the JVM ;) so I need to modify the source code of the hotspot :)
Thx!! :D

Netbeans 4.1 Recompiling even if the source code is not modified

I am new to NetBeans 4.1
So Please guide me
I have 300 Java Source files
I installed Netbeans and have my source code in Netbeans But as soon as I run Executable.java It compiles all the files and Runs it
But afterwards when I run that file again it again compiles all the files which unneccasirily wastes Time
Is It proper
I think it should check for modified files and then compile
Please help me regarding this
Bye for now
CSJakharia

One other thing to note: you may want to subsrcibe to the mailing list: [email protected] That list is a focal point for the NetBeans user community.
Continuing this thread in this forum might not be as effective as starting a new thread on that list.
vbk

How to obtain source code of weka and enable to modify it

hello,
how to obtain source code of weka and enable to modify it such i want to extract code of some process that I make

Hi ENG,
Since the issue regards to Weka. It is out of the support boundaries of our forum, I suggesT you post the question in the following forum:http://forums.pentaho.com/forumdisplay.php?81-Pentaho-Data-Mining-WEKA.
It is appropriate and more experts will assist you.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to modify source code on website

I would like to view and modify source code for my website on the iphone. I have an app that allows me to FTP the files to my server. But, I don't know how to view code in Safari and be able to modify it. Can you tell me how to do that?
Thanks!

See also:
*Firefox > (Web) Developer > Page Source
*Tools > Web Developer > Page Source (Ctrl+U)
*right-click on a web page and select View Page Source in the context menu

Modify source code for Active-X viewer

Requirement:
Whenever an ActiveX viewer is selected, and a report link is clicked, the control goes to Url - CeVwr which is a servlet pointing to ReportSourceBridge.java residing in reportsourcebridge.jar. This class alongwith all other classes present in this jar pop up the parameter screen and process it to display report. Our requirement is to dynamically prepare this parameter screen, by localizing the strings - parameter prompts and their options - based on user's locale.
Reason for workaround:
BO does not provide any source code for Active-X viewer but they do for DHTML and Advanced DHTML viewer. So it was easy for us to implement our requirements in DHTML and AdvDHTML viewers but for Active-X viewer it is not the same story.
Workaround:
We identified a core class ParameterHTMLRenderResult.java present in rascore.jar, which is the one which genrates HTML for parameter prompt screen for all viewers, accept for the Java one. We extracted all parameters, their descriptions, their prompting options as well as current values and modified the html result to get a localised HTML result. We also passed user's locale in this class.
Question: Is the source code for Active-X viewer available? Is it okay for us to modify Active-X viewer?

Hi Chris,
We do not provide the activex viewer code and do not support modifying it or any of our other code.
Code for those two other viewers is available since they are html based viewers so that code is easily obtainable, but we do not support customers making changes to it.
Jason

Source code for 2d cross-correlation fx?

I know this is a long shot but does anyone have the c or c++ code to compute the 2d (image) cross-correlation fx? (I know that IMAQ VISION has the cross-correlation routine but I am looking to potentially modify the 2d correlation routine to compute something called non-symmetry coefficient and would need to start with the source code). Or, labview source code for this operation would also be quite acceptable and in fact preferred!!
Thanks,
Don

I don't have the 2D cross correlation in labview, but... isn't the cross correlation very similar to an FFT? In that case a 2D FFT could maybe help since it shows how the 2D FFTs are derived from 1D FFTs in labview. I attach an llb where 2D FFT is done. I don't know where I got it from, maybe I even wrote it myself sometime in the dark past (probably translating it from some piece of C source code from the 'Numerical Recipes' book).
Maybe it is of some help for you...
-Franz
Attachments:
2dfft.llb ‏46 KB

ABAP source code is written "by hand" or automatically?

Hi all,
I would like to modify the report "Open Items - Vendor Due Date Forecast" created by T. S_ALR_87012084.
With SE93 i found the name of the program RFKOFW00, which are referring to the T. S_ALR_87012084. T. S_ALR_87012084. (Parameter: D_SREPOVARI-REPORT = RFKOFW00) and with SE38 i have seen the ABAP source code of the program RFKOFW00.
My questions are:
1) The ABAP source code of the program RFKOFW00 is written "by hand", or automatically by one of the SAP tools, for example Report Painter/Writer, SAP queryu2026..? It seems to me that it is written "by hand". Is this true?
2) In general, how can i tell if a SAP ABAP program is written "by hand" or automatically by one of SAP tools? I know that one way to understand is that source code, written by hand is more clear.
Is there a way to understand, more accurate, more secure?
Thanks in advance
Serena

Hi ,
if the code is automatically created, there will be a comment line in the beginning of the code which says
Generated function module for ..........
Please do not modify or copy this function module
Regards

Modify javadoc source code

Similar Messages

Maybe you are looking for