Modify selection with "selecet all"

In CS3 it was no problem to smooth, expand or contract the selection after you selected the whole canvas with ctrl-a. In CS4 you only can choose border after you selected all. This is a realy big step back.
Another step back is the oval selection tool. When you've used in cs3 and made an oval selection bigger than the canvas and moved the selection, the parts of the selection outside the canvas stil remains oval. In CS4 the selection is cout down to the size of the canvas, so if you think, the position of your selection is not perfekt you can not move is because it not an oval any more. You have to make a new oval selection an hope, the you now hit the right position.

Your point is taken about the select all change. Adobe is keenly aware of user opinion on this. As far as your second request, you can always use the space bar while your mouse button is clicked down to move a selection. No good for you once you unclick, but extremely useful otherwise.

Similar Messages

Dynamic SELECT with FOR ALL ENTRIES IN: take 2

Hello Xperts,
we are now having a bit of new trouble with the following SELECT ... special thanks to Raul and Suhas for their previous contributions.
FIELD-SYMBOLS:
 <itab1> TYPE standard table.
ASSIGN ATTR_T_I->* TO <itab1>.
 select
 FIELD1
 FIELD2
 from DBTAB1
 into CORRESPONDING FIELDS OF table <itab1>
 FOR ALL ENTRIES IN <itab1>
 where
 (condition).
ATTR_T_I is a static attibute of type table containing 10 records where all records have FIELD1 and FIELD2 empty.
The select finds in DBTAB1 entries fulfilling the 'condition' for 8 of the above 10 records in ATTR_T_I.
Hence, after the select 8 of the 10 records in ATTR_T_I have the fields FIELD1 and FIELD2 filled (ie not empty).
So far so good!
BUT: the 2 remaining records (i.e. those without entries in DBTAB1 fullfilling 'condition') have been deleted! Why? This is not what we want nor expected.
Any ideas out there how to fix this?
Thanx!

Martin Helmstein wrote:
> Yes, 'condition' contains all the key fields of DBTAB1.
Hi Martin,
It's not the Where condition fields i was talking about. I was referring to the Select fields, you have to SELECT all the keyfields when using FAE. Something like this:
SELECT key1 key2 ... keyn "all the key fields of the table
field1 field2 ... fieldn
FROM table
INTO CORRESPONDING FIELDS OF it_data
FOR ALL ENTRIES IN <itab>
WHERE (condition).
You can search in the forums for further details. It has been discussed many a times.
BR,
Suhas

Dynamic SELECT with FOR ALL ENTRIES IN

Hello Xperts,
we are having a bit of trouble with the following SELECT
FIELD-SYMBOLS:
 <itab1> TYPE standard table.
ASSIGN ATTR_T_I->* TO <itab1>.
 select
 FIELD1
 FIELD2
 from DBTAB1
 into CORRESPONDING FIELDS OF table <itab1>
 FOR ALL ENTRIES IN <itab1>
 where
 FIELD3 = <itab1>-FIELD3 and
 FIELD4 = <itab1>-FIELD4
ATTR_T_I is a static attibute of type table.
The syntax check throws the following message:
The specified type has no structure and therefore no component called FIELD3.
Any ideas out there how to solve this issue?
Thanx!

Hi Martin,
Change your code like this and try.
DATA: itab2 TYPE TABLE OF string.
FIELD-SYMBOLS:
 <itab1> TYPE standard table.
ASSIGN ATTR_T_I->* TO <itab1>.
APPEND 'FIELD3 = <itab1>-FIELD3 and' TO itab2.
APPEND 'FIELD4 = <itab1>-FIELD4' TO itab2.
 select
 FIELD1
 FIELD2
 from DBTAB1
 into CORRESPONDING FIELDS OF table <itab1>
 FOR ALL ENTRIES IN <itab1>
 where
 (itab2)
Regards,
Rahul Muraleedharan.

The select with for all entries is not working correctly

IF NOT i_ekko_ekpo[] IS INITIAL.
    SELECT ebeln
           ebelp
           zekkn
           vgabe
           bewtp
           menge
           bpmng
           shkzg
           INTO TABLE i_ekbe
           FROM ekbe
           FOR ALL ENTRIES IN i_ekko_ekpo
           WHERE ebeln EQ i_ekko_ekpo-ebeln.
            AND ebelp EQ i_ekko_ekpo-ebelp.
    IF sy-subrc EQ 0.
      SORT i_ekbe.
    ENDIF.
ENDIF.
I have a PO with 2 line items in i_ekko_ekpo. In EKBE, I have 49 recs for this PO and this select is returning only 13 recs.
I tried by commenting EBELP and still the same result.
Thanks
Kiran
Edited by: kiran dasari on May 22, 2009 9:56 PM

Hi Sudhi, I added these now but still no charm
    SELECT ebeln
           ebelp
           zekkn
           vgabe
           bewtp
           menge
           bpmng
           shkzg
           INTO TABLE i_ekbe
           FROM ekbe
           FOR ALL ENTRIES IN i_ekko_ekpo
           WHERE ebeln EQ i_ekko_ekpo-ebeln
             AND ebelp EQ i_ekko_ekpo-ebelp
             AND zekkn GE '00'
             AND vgabe IN ('1','2').
And as per your note: in the 13 entries, am having duplicate also. This is something weird for me now.
Any more clues.
Thanks
Kiran

INNER JOIN with FOR ALL ENTRIES IN Performance ?

I am using following the following Select using Inner join with For All Entries in.
 SELECT kebeln kebelp kvbeln kvbelp
 FROM ekkn AS k INNER JOIN ekbe AS b ON kebeln = bebeln
 AND kebelp = bebelp
 INTO TABLE gi_purchase
 FOR ALL ENTRIES
 IN gi_sales
 WHERE k~mandt EQ sy-mandt
 AND k~vbeln EQ gi_sales-vbeln
 AND k~vbelp EQ gi_sales-posnr
 AND b~budat EQ p_date.
If i am not doing inner join then I will have to do 2 select with for all entries in on ekkn and ekbe tables and then compare them.
I want to know which one has better performance
Inner join with for all entries in
 or
2 Selects with for all entries in

the join is almost aways faster:
<a href="/people/rob.burbank/blog/2007/03/19/joins-vs-for-all-entries--which-performs-better">JOINS vs. FOR ALL ENTRIES - Which Performs Better?</a>
<a href="http://blogs.ittoolbox.com/sap/db2/archives/for-all-entries-vs-db2-join-8912">FOR ALL ENTRIES vs DB2 JOIN</a>
Rob

Inner Join with For All Entries - Performance ?

I am using following the following Select using Inner join with For All Entries in.
 SELECT kebeln kebelp kvbeln kvbelp
 FROM ekkn AS k INNER JOIN ekbe AS b ON kebeln = bebeln
 AND kebelp = bebelp
 INTO TABLE gi_purchase
 FOR ALL ENTRIES
 IN gi_sales
 WHERE k~mandt EQ sy-mandt
 AND k~vbeln EQ gi_sales-vbeln
 AND k~vbelp EQ gi_sales-posnr
 AND b~budat EQ p_date.
If i am not doing inner join then I will have to do 2 select with for all entries in on ekkn and ekbe tables and then compare them.
I want to know which one has better performance
Inner join with for all entries in
 or
2 Selects with for all entries in

An Inner Join with for all entries should be done if you add this....
IF NOT gi_sales[] IS INITIAL.
SELECT k~ebeln k~ebelp k~vbeln k~vbelp
FROM ekkn AS k INNER JOIN ekbe AS b ON k~ebeln = b~ebeln
AND k~ebelp = b~ebelp
INTO TABLE gi_purchase
FOR ALL ENTRIES
IN gi_sales
WHERE k~mandt EQ sy-mandt
AND k~vbeln EQ gi_sales-vbeln
AND k~vbelp EQ gi_sales-posnr
AND b~budat EQ p_date.
ENDIF.
Also, while you use an index or the complete key for the SELECT, your not going to suffer from lack of performance -;)
Greetings,
Blag.

Problem with for all entries in select querry

hi,
Hi,
I am using select queery like this
SELECT version COUNT( * )
from ztbi_default_va4
INTO CORRESPONDING FIELDS OF TABLE   lit_new
FOR ALL ENTRIES IN lit_new1
WHERE network = lit_new1-network GROUP BY version.
this is not working showing error as:
The addition "FOR ALL ENTRIES" excludes all aggregate functions with
the exception of "COUNT( * )" as the single element of the SELECT     clause.
I am using only count(*) ,not using othes like max,min etc,,,,,,,,,
please suggest any missing in syntax,,,,attach relavant code using count(*) with for all entreis
any help appriciated,,,,,
Thanks in advance,,,,

Hi,
Try this -
TYPES: begin of t_data,
             version TYPE version,
             count    type i,
             end of t_data.
DATA: i_data TYPE STANDARD TABLE OF t_data,
           wa_data TYPE t_data.
DATA: l_version TYPE version,
           l_count TYPE i.
SELECT version COUNT( * )
from ztbi_default_va4
INTO CORRESPONDING FIELDS OF TABLE   lit_new
FOR ALL ENTRIES IN lit_new1
WHERE network = lit_new1-network.
SORT lit_new.
LOOP AT lit_new INTO lwa_new.
    IF lwa_new EQ l_version.
      l_count = l_count + 1.
    ELSE.
      wa_data-version = l_version.
      wa_data-count = l_count + 1.
      APPEND wa_data TO i_data.
      CLEAR: wa_data.
      CLEAR: l_count.
    ENDIF.
    l_version = lwa_new-version.
    CLEAR: lwa_new.
I hope this will do.
Make any necessary changes.
Regards,
Harsh Bansal

How does select stmt with for all entries uses Indexes

Hello all,
I goes through a number of documents but still confused how does select for all entries uses indexes if fields are not in sequences. i got pretty much the same results if i take like two cases on Hr tables HRP1000 and HRP1001(with for all entries based upon hrp1000). Here is the sequence of index fields on hrp1001 (MANDT, OTYPE, OBJID, PLVAR, RSIGN, RELAT, ISTAT, PRIOX, BEGDA, ENDDA, VARYF, SEQNR). in second case objid field is in sequence as in defined Index but i dont see significant increase in field even though the number of records are around 30000. My question is does it make a differrence to use field sequence (same as in table indexes) in comparison to redundant field sequence (not same as defined in table indexes), secondly how we can ge tto know if table index is used in Select for entries query i tried Explain in ST05 but its not clear if it uses any index at all in hrp1001 read.
here is the sample code i use to get test results.
test case 1
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
 t2 TYPE timestampl,
 t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
 WHERE mandt EQ sy-mandt AND
 plvar EQ '01' AND
 otype EQ 'S'AND
 istat EQ '1' AND
 begda <= sy-datum AND
 endda >= sy-datum AND
 langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
 FOR ALL ENTRIES IN it_hrp1000
 WHERE mandt EQ sy-mandt AND
 otype EQ 'S' AND
* objid EQ it_hrp1000-objid and
 plvar EQ '01' AND
 rsign EQ 'B' AND
 relat EQ '007' AND
 istat EQ '1' AND
 begda LT sy-datum AND
 endda GT sy-datum and
 sclas EQ 'C' and
 objid EQ it_hrp1000-objid.
* %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.
test case 2
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
 t2 TYPE timestampl,
 t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
 WHERE mandt EQ sy-mandt AND
 plvar EQ '01' AND
 otype EQ 'S'AND
 istat EQ '1' AND
 begda <= sy-datum AND
 endda >= sy-datum AND
 langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
 FOR ALL ENTRIES IN it_hrp1000
 WHERE mandt EQ sy-mandt AND
 otype EQ 'S' AND
 objid EQ it_hrp1000-objid and
 plvar EQ '01' AND
 rsign EQ 'B' AND
 relat EQ '007' AND
 istat EQ '1' AND
 begda LT sy-datum AND
 endda GT sy-datum and
 sclas EQ 'C'." and
* objid EQ it_hrp1000-objid.
* %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.

Mani wrote:
Thank you for your answer, its very helpful but i am still nor sure how does parameter rsdb/max_blocking_factor affect records size.
Hi,
The blocking affects the size of the statement and the memory structures for returning the result.
So if your itab has 500 rows and your blocking is 5, the very same statement will be executed 100 times.
Nothing good or bad about this so far.
Assume, your average result for an inlist 5 statement is 25 records with an average size of 109 bytes.
You average result size will be 2725 byte plus overhead which will nearly perfectly fit into two 1500 byte ethernet frames.
Nothing to do in this case.
Assume your average result for an inlist 5 statement is 7 records with an average size of 67 bytes.
You average result size will be ~ 470 byte plus overhead which will only fill 1/3 of a 1500 byte ethernet frame.
In this case, setting the blocking to 12 ... 15 will give you 66% network transfer performance gain,
and reduces the number of calls to the DB by 50%, giving additional benefit.
Now this is an extreme example. The longer the average row length is, the lower will be the average loss in the network.
You have the same effects in memory structures, but on that layer you are fighting single micro seconds instead of
hundreds of these, so in real life it is rarely measurable.
Depending on table-statistics, oracle might decide for short inlists to use a concatanation instead of an inlist.
This is supposed to be more costy, but I never had a case where I could proove a big difference.
Values from 5 to 15 for blocking seem to be ok for me. If you have special statements in customer coding,
it #might# be benefitial to do the mentioned calculations and do some network tracing to see if you can squeeze your
network efficiency by tuning the blocking.
If you have jumbo frames enabled, it might be worth to be analyzed as well.
If you are only on a DB-CI system that is loopback connected to the DB, I doubt there might be a big outcome.
Hope this helps
Volker

How to transfer a few selected pictures I need from iPhone 4 Camera Roll with four hundred pictures to PC Vista. Just selected pictures not all folder

How to transfer a few selected pictures from iPhone 4 Camera Roll with four hundred pictures to my PC Vista. Just selected pictures not all folder. Thanks

You do understand though, that if something happened to your phone - if you lost it, if it were stolen, if you dropped it and were unable to access it, if it got wet - all those pictures that you had not transferred to your computer would no longer be so "handy." Just saying, I have not only read that horror story from many users on this forum, but have seen it live from many users in my own life. Do yourself a favor and back them up sooner rather than later by transferring them all now. Trust me on this, you won't regret it.

My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all

My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all. can anyone help am in Botswana an no apple store to help?

I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

"Another program on your computer would like to modify Firefox with the following add-on" - how do I allow extensions?

I cannot get extensions to run or enable, nor does the browser remember my preference.
For example, after I install or Enable an extension, when I restart Firefox I get a tab for every extension that forces me to check "Allow this installation" after the prompt "Another program on your computer would like to modify Firefox with the following add-on".
Moreover, when I click 'Options' on an installed extension, Firefox freezes permanently.
Note that I DO NOT have any extensions.* files in my Profile folder, nor do they appear.
I am trying to get MozRepl running. I am able to install it, but the menu option does not get added in the 'Tools' menu. Moreover none of the installed extensions are able to add to the menu.
I've tried every solution in the following links
https://support.mozilla.org/en-US/questions/929335
http://kb.mozillazine.org/Preferences_not_saved
https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save
I have made the Profiles\ folder and all subfolders Read-only, including the files.
I have tried the "Reset Firefox to its default state".
I have tried uninstalling (including removing all profiles/data) and re-installing Firefox, and I get the same issues.
My operating system is Windows 7 and I have McAfee SiteAdvisor Enterprise Plus and McAfee VirusScan Enterprise + AntiSpyware Enterprise.

Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

Alternative for / Problems with: "For all entries in data_package"

Hi Guys
I doing some ABAP in a Start Rotine in BW and would like to do the following:
select * from /BI0/PMATERIAL into table 0mat
for all entries in DATA_PACKAGE
where material = DATA_PACKAGE-/bic/zmaterial.
But I get the following error:
E:When using the addition "FOR ALL ENTRIES IN itab", the fields "MATERIAL" and "DATA_PACKAGE-/BIC/ZMATERIAL" must have the same type and length. and length.
ZMATERIAL:
- Length: 28
- Type: CHAR - Character String
ZMATERIAL:
- Length: 18
- Type: CHAR - Character String
According to the error message "For all entries" cannot be used in this case since the lengths are not identical, but is there an alternative way to do what I would like to do?
Thanks in advance, kind regards,
Torben

Hi
one thing you can try like this define one variable in other itab of same type
then loop at the first table and assign it to new field and modify the itab
then use this field with for all entries
Regards
Shiva

"Open With"- "Change All" corrupts your file (Resource forks, extended attributes, creation date)

I finally know why some of my files get corrupted.
If you use the following method to assign one kind of file to always open with the same application;
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8387.html
(File -> Get Info -> Open With -> Change All)
an extended attribute will be added to your file.
You can examine that by typing "ls -l" in Terminal. If you see an @-sign after permissions than you have an extended attribute in that file.
To see what it contains, type "xattr -l filname.jpg" in Terminal.
Besides that is adds an extended attribute (which can be deleted with the "xattr --help" command) the modification date of the selected file will be changed.
I think this is irritating because I wan't to keep my master photos with the same modification date as creation date.
What else does it effect besides the modification date and to add extended attributes? Does my metadata get intact?
(If you further want to make a backup copy on for example a FAT32 filesystem than your got a new problem. FAT32 doesn't support resource forks, so besides filename.jpg you will have an additional ._filename.jpg of 4kb)

Doesn't sound like there is any corruption going on to me. It may change the date modified, but that should be expected since you modified the file.

Modify select-option!!

Hi
i hav to modify select-option:
The select-option S_LGORT, S_VSTEL and S_LGORT will be restricted.
Only show tab Single vals and ranges, and option equal...how shall i modify..loop at that select-option or directly assign the option value n modify ...points for sure...
Regards
Gunjan

chk this report
REPORT TESTREP.
* Include type pool SSCR
TYPE-POOLS SSCR.
* Define the object to be passed to the RESTRICTION parameter
DATA RESTRICT TYPE SSCR_RESTRICT.
* Auxiliary objects for filling RESTRICT
DATA OPT_LIST TYPE SSCR_OPT_LIST.
DATA ***      TYPE SSCR_***.
* Define the selection screen objects
* First block: 3 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK BLOCK_0 WITH FRAME TITLE TEXT-BL0.
SELECT-OPTIONS SEL_0_0 FOR SY-TVAR0.
SELECT-OPTIONS SEL_0_1 FOR SY-TVAR1.
SELECT-OPTIONS SEL_0_2 FOR SY-TVAR2.
SELECT-OPTIONS SEL_0_3 FOR SY-TVAR3.
SELECTION-SCREEN END   OF BLOCK BLOCK_0.
* Second block: 2 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK BLOCK_1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS SEL_1_0 FOR SY-SUBRC.
SELECT-OPTIONS SEL_1_1 FOR SY-REPID.
SELECTION-SCREEN END   OF BLOCK BLOCK_1.
INITIALIZATION.
* Define the option list
* ALL: All options allowed
MOVE 'ALL'        TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-BT,
               OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NB,
               OPT_LIST-OPTIONS-NE,
               OPT_LIST-OPTIONS-NP.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* NOPATTERN: CP and NP not allowed
CLEAR OPT_LIST.
MOVE 'NOPATTERN' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-BT,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NB,
               OPT_LIST-OPTIONS-NE.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* NOINTERVLS: BT and NB not allowed
CLEAR OPT_LIST.
MOVE 'NOINTERVLS' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NE,
               OPT_LIST-OPTIONS-NP.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* EQ_AND_CP: only EQ and CP allowed
CLEAR OPT_LIST.
MOVE 'EQ_AND_CP' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* JUST_EQ: Only EQ allowed
CLEAR OPT_LIST.
MOVE 'JUST_EQ' TO OPT_LIST-NAME.
MOVE 'X' TO OPT_LIST-OPTIONS-EQ.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* Assign selection screen objects to option list and sign
* KIND = 'A': applies to all SELECT-OPTIONS
MOVE: 'A'          TO ***-KIND,
        '*'          TO ***-SG_MAIN,
        'NOPATTERN' TO ***-OP_MAIN,
        'NOINTERVLS' TO ***-OP_ADDY.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'B': applies to all SELECT-OPTIONS in block BLOCK_0,
*             that is, SEL_0_0, SEL_0_1, SEL_0_2
CLEAR ***.
MOVE: 'B'          TO ***-KIND,
        'BLOCK_0'    TO ***-NAME,
        'I'          TO ***-SG_MAIN,
        '*'          TO ***-SG_ADDY,
        'NOINTERVLS' TO ***-OP_MAIN.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'S': applies to SELECT-OPTION SEL-0-2
CLEAR ***.
MOVE: 'S'          TO ***-KIND,
        'SEL_0_2'    TO ***-NAME,
        'I'          TO ***-SG_MAIN,
        '*'          TO ***-SG_ADDY,
        'EQ_AND_CP' TO ***-OP_MAIN,
        'ALL'        TO ***-OP_ADDY.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'S': Applies to SELECT-OPTION SEL_0_3
CLEAR ***.
MOVE: 'S'        TO ***-KIND,
        'SEL_0_3' TO ***-NAME,
        'I'        TO ***-SG_MAIN,
        'N'        TO ***-SG_ADDY,
        'JUST_EQ' TO ***-OP_MAIN.
APPEND *** TO RESTRICT-***_TAB.
* Call function module
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
             RESTRICTION                = RESTRICT
*           DB                          = ' '
       EXCEPTIONS
             TOO_LATE                   = 1
             REPEATED                   = 2
             NOT_DURING_SUBMIT          = 3
            DB_CALL_AFTER_REPORT_CALL = 4
            SELOPT_WITHOUT_OPTIONS     = 5
             SELOPT_WITHOUT_SIGNS       = 6
             INVALID_SIGN               = 7
            REPORT_CALL_AFTER_DB_ERROR = 8
              EMPTY_OPTION_LIST          = 9
             INVALID_KIND               = 10
             REPEATED_KIND_A            = 11
             OTHERS                     = 12.
* Exception handling
IF SY-SUBRC NE 0.
ENDIF.

Modifying Edges - Why are ALL lines highlighted??

I just upgraded to Flash CS6 yesterday, and am trying to work on an animation project.
Whenever I use the Select Tool to modify the edges of a Paintbrush stroke, or a Pencil line, ALL of the lines in the image are highlighted as I bend the edge this way and that.
I'd prefer for the outline highlight to only show up on the area I'm actually modifying.
I find this default behavior really distracting, and I can't figure out how to turn it off.

If you are using normal mergable shape mode,curves when selected has dotted grid pattern to indicate the selection.However if all the lines are getting selected that means they are all connected.Switch to subselection tool and see if all the lines are connected. In case you dont want different lines to merge on intersection then use object drawing mode.However if you you want to continue with normal shape mode and want only outlines to be displayed,you can choose View>Preview modes>Outlines(CTRL+SHIFT+ALT+O on WIN/CMD+SHIFT+OPT+O on MAC)).Hope this hhelps

Modify selection with "selecet all"

Similar Messages

Maybe you are looking for