Modify the preference value of the default route

Hi
How to achieve the Below ? any configuration example?
1)How to modify the preference value of the default route to be less prefered than OSPF External route
2)how to redistribute the default route as type 2 external route
3)how to redistribute the default route as type 1 external route
thanks

Hi Ibrahim,
See below:
1) Can you elaborate on this a bit? Can you explain, specifically, what your trying to accomplish? I don't think you can get a default route into the OSPF RIB that is not external as the default is injected as a Type-5 LSA (e1 or e2). If your talking about getting a router to use the OSPF learned default over the default router learned via some other source (e.g. static, BGP, etc), then it depends on the source because of the Administrative Distance when comparing the two defaults ( the one default learned via OSPF has AD=110, and the other default is AD=X, where X is the Administrative Distance assigned to the protocol).
2) Use the "default-information originate metric-type 2" command under "router ospf" -- Note this is the default
3) Use the "default-information originate metric-type 1" command under "router ospf" -- Note, you don't need this in Totally Stubby Area.
4) For NSSA area you have to use the "area nssa <area_num> default information-originate metric-type <type>" router subcommand. Note your NSSA should have a Type-7 LSA for the default route
Rate if helpful.
Joe

Similar Messages

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to keep the field value in the forms for one week

I have an application that when the user logs on to it , it shows all the documents that are in the current dept.
the form has the following fields:
document no
sent date
assigned to
dep_LOV
and a check box
if a user clicks the check box and assignes the document to another dept by cliking the LOv then the assigned to field should be populated with the new value and the sent date should be today's date(sysdate). the requirment is that once the user assignes the documnet to certain depts (for example sales dept) the assigned to field and the sent date should show up in the form for one week and the user should be able to see that data in the form the next time she /he logs onto the application. the one week time is to make sure the documcnt has reached the assigned dept. after one week from today's date the updated assigned_to field and the document no should not display on the form. During the one week if the user logs on to the form again that particular document and the assigned to and sent to fields shoould be grayed out and shhould not be updatable. I will greatly appreciate any suggetion as of what to do to solve this problem. it is urgent. Pleade help

-> so you are saying that I should have a block level post_query trigger and put the where clause in it?
No. Post-query trigger runs AFTER the query has been executed, and it runs once for each row fetched. It is for other purposes, NOT for setting a where clause.
-> Plus i want to be able to gray out the field once populated with the sales dept.I have come up with the following code:
Your Set_item_instance_property is almost correct. And THAT line would go into the Post-Query trigger. This is what you might use:
<pre> Set_item_instance_property ('docs.assigned_to',:system.trigger_record, Enabled,Property_False);</pre>
Please watch your use of underscore, dashes, commas and parentheses: _ - , ( )
The way to set your default where clause would be the following, and you should do it in the key-exeqry trigger, or someplace similar:
<pre> set_block_property('DOCS', default_where,
'NVL(sent_date,sysdate) >= sysdate-7' );
Go_block('DOCS');
Execute_Query;</pre>
I used the NVL function so your select will show rows where sent_date is null OR sent_date has a value that is within 7 days prior to the current date.
What is the field :docs.assigned_to used for? If you want to include ONLY rows that are assigned to a particular person, then your where clause might be:
<pre> 'assigned_to = :ctrl.assigned_to and NVL(sent_date,sysdate) >= sysdate-7' </pre>
and you should have a control block with the assigned_to field in it, where the user can enter a value before querying the DOCS block.

How to clear the selected values in the JCombobox

Hi All,
Can you please tell - how to clear the selected values in the JCombobox
I have four dropdowns in my application, When I click "CLEAR" button, what ever the values selected in the four drop downs should go off and view as "SELECT" in all the dropdowns.

In addition to the above you should also check out [Combo Box Prompt|http://www.camick.com/java/blog.html?name=combo-box-prompt] which makes it easy to display the default prompt.

How to change the initial value of the list.

Hi,
I have to change the initial value of the list.In the 'When-new-block instance' trigger, i wrote the following:
set_item_property(list_id,initial_value,
'2000');
But when I run the form, it says this property is not recognised.
I need to change the initial value.
Please help me out.
Thanks
Viji.

Do you mean the default value ?
Set_item_property('list_item_name', default_value,2000);

Problem in getting the current value of the drop down while calling value change listener

I have 2 drop down list. I am trying to get the value of first drop down from other drop downs value change listener. Initially one drop down contains a default value. First time I got the value while calling the value change listener. But if I change the default value to other in the first drop down and call the value change listener of the second drop down then I got the old value in the bean. Can anyone suggest a process

If I use the following code it gives me the current index.
            valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
            System.out.println(valueChangeEvent.getNewValue());
This is also giving me current index.
BindingContainer container = BindingContext.getCurrent().getCurrentBindingsEntry();
AttributeBinding attrIdBinding = (AttributeBinding)container.getControlBinding("PersonTypeId1");
if(attrIdBinding.getInputValue()!=null)
               System.out.println(attrIdBinding.getInputValue().toString());
But at last I got some help from Shay Shmeltzer's Weblog.
BindingContainer bindings =
                BindingContext.getCurrent().getCurrentBindingsEntry();
                // Get the sepecific list binding
                JUCtrlListBinding listBinding =
                (JUCtrlListBinding)bindings.get("PersonTypeId1");
                // Get the value which is currently selected
                Object selectedValue = listBinding.getSelectedValue();
                  long value =0L;
                if(selectedValue!=null){
                    System.out.println("Sudip.. Person Type using bindings"+selectedValue.toString());
But this returns "ViewRow [oracle.jbo.Key[300000860721156 ]]"
300000860721156 is the original value.. Would you please help me to figure it.

Keep the old value in the UI field if entity validation fails

Hi,
I have a requirement to retain the original value (old value), if the entity attribute validation fails when the filed value is changed. I have created one validation rule on the entity object and the validation rule is working as expected. But I would like to reset the value to the original value if the validation fails on the modified value.
Thanks and Regards,
S R Prasad

Hello,
Please tell us your first name, and change your forum handle to something more friendly than User123. It’s nicer and easier for us this way.
It seems that the forum software messed up the example code you wanted to present. To avoid that you can use the forum tags [code] and [/code] at the beginning and end of your code.
If I understand correctly, you are trying to retrieve the original field value from a fxx array, however these arrays are populated after page submit, so they don’t hold the initial values of the column.
I think the simplest solution will be to use an ‘onfocus’ event that will save the initial value – this.value – in a global JavaScript variable. In your ‘onchange’ code, instead of clearing the field if validation failed just assigns the original value for the JavaScript variable.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
 /// <summary>
 /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
 /// determine whether or not the entity class should be generated.
 /// </summary>
 public class CodeWriterFilter : ICodeWriterFilterService
 //list of entity names to generate classes for.
 private HashSet<string> _validEntities = new HashSet<string>();
 //reference to the default service.
 private ICodeWriterFilterService _defaultService = null;
 /// <summary>
 /// constructor
 /// </summary>
 /// <param name="defaultService">default
implementation</param>
 public CodeWriterFilter( ICodeWriterFilterService defaultService )
 this._defaultService = defaultService;
 LoadFilterData();
 /// <summary>
 /// loads the entity filter data from the filter.xml file
 /// </summary>
 private void LoadFilterData()
 XElement xml = XElement.Load("filter.xml");
 XElement entitiesElement = xml.Element("entities");
 foreach (XElement entityElement in entitiesElement.Elements("entity"))
 _validEntities.Add(entityElement.Value.ToLowerInvariant());
 /// <summary>
 /// /Use filter entity list to determine if the entity class should be generated.
 /// </summary>
 public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
 return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
 //All other methods just use default implementation:
 public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
 return _defaultService.GenerateAttribute(attributeMetadata, services);
 public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
 return _defaultService.GenerateOption(optionMetadata, services);
 public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
 return _defaultService.GenerateOptionSet(optionSetMetadata, services);
 public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
 return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
 public bool GenerateServiceContext(IServiceProvider services)
 return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
 <entity>systemuser</entity>
 <entity>team</entity>
 <entity>role</entity>
 <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

Not reflecting the new value of the AWvariable

I am working with Jdeveloper and BI beans
we are using Java Analytical workspace API for connecting and saving the user input as a Analytical workspace Variable
by using fallowing code
awConn.executeCommand("awvariable=value");
here the problem is i can not made this assignment perminent in Analytical Workspace
i.e after execution of the program i checked with AnallyticalworkSpace manager's worksheet it not reflecting the new value of the AWvariable. It is showing only old value.
how can i do that assignment it from java api .
any one can help me

That other post looks different, though - the OP is now manipulating the model.The OPs statement of the problem was:
Adding new data to the exitsting model causes the JList to display blank when I refresh the screen.
The suggestion in the other posting was to change the model not the array and the tutorial has a working example of this.
The OPs question was:
When my action performed creates a new instance of the model everything works fine but is this how it should work?
The answer to this is no, you don't need to change the model, just update the model.
So if the OP read the other posting and read the tutorial they should have an answer to their problem.
As you suggested there is no need to create a custom model. The example in the tutorial uses the default list model, if the OP read the tutorial they would know that.

[svn:fx-trunk] 9127: Fixes bug in Slider animation where we would set the actual value during the animation , ignoring any snapInterval setting.

Revision: 9127
Author:   [email protected]
Date:     2009-08-05 17:25:39 -0700 (Wed, 05 Aug 2009)
Log Message:
Fixes bug in Slider animation where we would set the actual value during the animation, ignoring any snapInterval setting. The fix uses the pendingValue property to hold the animated value, which makes the slider look correct, but no actual value update is sent until the animation completes.
QE notes: None
Doc notes: None
Bugs: SDK-21776
Reviewer: Hans
Tests run: checkintests, Mustella (gumbo/components/Slider)
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21776
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

Revision: 9127
Author:   [email protected]
Date:     2009-08-05 17:25:39 -0700 (Wed, 05 Aug 2009)
Log Message:
Fixes bug in Slider animation where we would set the actual value during the animation, ignoring any snapInterval setting. The fix uses the pendingValue property to hold the animated value, which makes the slider look correct, but no actual value update is sent until the animation completes.
QE notes: None
Doc notes: None
Bugs: SDK-21776
Reviewer: Hans
Tests run: checkintests, Mustella (gumbo/components/Slider)
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21776
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How to update the table value in the valuechange event?

I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
 Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
 item.setCost(max_cost);
 item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?

As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

Need help Take out the null values from the ResultSet and Create a XML file

hi,
I wrote something which connects to Database and gets the ResultSet. From that ResultSet I am creating
a XML file. IN my program these are the main two classes Frame1 and ResultSetToXML. ResultSetToXML which
takes ResultSet & Boolean value in its constructor. I am passing the ResultSet and Boolean value
from Frame1 class. I am passing the boolean value to get the null values from the ResultSet and then add those
null values to XML File. When i run the program it works alright and adds the null and not null values to
the file. But when i pass the boolean value to take out the null values it would not take it out and adds
the null and not null values.
Please look at the code i am posing. I am showing step by step where its not adding the null values.
Any help is always appreciated.
Thanks in advance.
============================================================================
Frame1 Class
============
public class Frame1 extends JFrame{
private JPanel contentPane;
private XQuery xQuery1 = new XQuery();
private XYLayout xYLayout1 = new XYLayout();
public Document doc;
private JButton jButton2 = new JButton();
private Connection con;
private Statement stmt;
private ResultSetToXML rstx;
//Construct the frame
public Frame1() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
//setIconImage(Toolkit.getDefaultToolkit().createImage(Frame1.class.getResource("[Your Icon]")));
contentPane = (JPanel) this.getContentPane();
xQuery1.setSql("");
xQuery1.setUrl("jdbc:odbc:SCANODBC");
xQuery1.setUserName("SYSDBA");
xQuery1.setPassword("masterkey");
xQuery1.setDriver("sun.jdbc.odbc.JdbcOdbcDriver");
contentPane.setLayout(xYLayout1);
this.setSize(new Dimension(400, 300));
this.setTitle("Frame Title");
xQuery1.setSql("Select * from Pinfo where pid=2 or pid=4");
jButton2.setText("Get XML from DB");
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(java.lang.ClassNotFoundException ex) {
System.err.print("ClassNotFoundException: ");
System.err.println(ex.getMessage());
try {
con = DriverManager.getConnection("jdbc:odbc:SCANODBC","SYSDBA", "masterkey");
stmt = con.createStatement();
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
jButton2_actionPerformed(e);
contentPane.add(jButton2, new XYConstraints(126, 113, -1, -1));
//Overridden so we can exit when window is closed
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if (e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void jButton2_actionPerformed(ActionEvent e) {
try{
OutputStream out;
XMLOutputter outputter;
Element root;
org.jdom.Document doc;
root = new Element("PINFO");
String query = "SELECT * FROM PINFO WHERE PID=2 OR PID=4";
ResultSet rs = stmt.executeQuery(query);
/*===========This is where i am passing the ResultSet and boolean=======
===========value to either add the null or not null values in the file======*/
rstx = new ResultSetToXML(rs,true);
} //end of try
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
======================================================================================
ResultSetToXML class
====================
public class ResultSetToXML {
private OutputStream out;
private Element root;
private XMLOutputter outputter;
private Document doc;
// Constructor
public ResultSetToXML(ResultSet rs, boolean checkifnull){
try{
String tagname="";
String tagvalue="";
root = new Element("pinfo");
while (rs.next()){
Element users = new Element("Record");
for(int i=1;i<=rs.getMetaData().getColumnCount(); ++i){
tagname= rs.getMetaData().getColumnName(i);
tagvalue=rs.getString(i);
System.out.println(tagname);
System.out.println(tagvalue);
/*============if the boolean value is false it adds the null and not
null value to the file =====================*/
/*============else it checks if the value is null or the length is
less than 0 and does the else clause in the if(checkifnull)===*/
if(checkifnull){
if((tagvalue == null) || tagvalue.length() < 0 ){
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
root.addContent(users);
out=new FileOutputStream("c:/XMLFile.xml");
doc = new Document(root);
outputter = new XMLOutputter();
outputter.output(doc,out);
catch(IOException ioe){
System.out.println(ioe);
catch(SQLException sqle){

Can someone please help me with this problem
Thanks.

Modify the preference value of the default route

Similar Messages

Maybe you are looking for