Modify USEREXIT_AVAILABILITY_IN in RV03VFZZ help.

Hello all,
I'm trying to have the Avail. Check routine look at current Material Master Check Group (new) MARC-MTVFP instead of the one in sales line (old) VBAP-MTVFP since these have changed.
I'm new to user exists, please tell me what I need to do to be able to change this user-exit, in when I try to change RV03VFZZ (where this exit is), it's asking me for a Access Key, please tell me what I need to do to be able to mod. this. THanks.

Andres,
In order to implement a "USER EXIT" you need to request an object access key from SAP since this is a modification to the standard SAP code. Your basis person should be able to generate the key for you online at SERVICE.SAP.COM. You need to provide details of the object RV03VFZZ which houses the user exit. To get the object details try to open the include in change mode. SAP will display a dialog with the details of the object. Copy this iformation and send it to the basis perosn.
If you are on ECC 6.0 then you can also create an enhancement point within thin user exit. This way you not require to get an object access key.
Gajendra

Similar Messages

HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!

I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!

I got it figured out myself... yaaaaay for me!

Modify Report in po help

Hi Gurus
Need to modify report:
Printed Purchase Order Report(Portrait)
POXPRPOP
User want to print PO's greater then $2,500 only
or can give option's ALL or > 2,500. Any help Thanks in advance
[email protected]

There exists a standard Oracle Report "Purchase Order Detail Report". This reports details the PO along with the information on Quantity/Amount Due and Billed.
Please check if you can use it effecitvely to your use.

How to modify a VO? Help please

I am trying to modify a VO in sales (just have to change the where clause), went thru the tutorial but 'am not sure if I am doing it right.
Do I have to export the complete full java_top to my machine and then modify the VO?
Can somebody please give me a 4-5 step process on customizing an existing VO?

i agree with some of your earlier comments about the notes not been of much help and the course lacking some information. It has taken me almost 9 days to get one to work through a lot of trial and error and a lack of clear details.
Here are some of the steps (and I am more than happy for anyone to clear these up or add to them!)
Create a project in Jdev
sent FND: Diagnostics to yes for your user
sign into the application that you want to change and go to the page that you want to change.
At the bottom of the page you will see an about this page link, click on the link.
THis will open up the page to show the different objects within the page.
download the BC4J (including the CO/EO objects) components into your <JDEV_HOME>/myclasses using the EXACT same directory structure created on your PC as the one on your apps server.
Copy the WEBUI items to myprojects using the same directory structure as on the server
Exapnd all the items on the page and find the item that you want to change which should be linked to a VO. If you click on the VO it should give you something link oracle.apps.icx.etc.etc.
go to JAVA_TOP on your apps tier and download this file to the correct directory structure. As these files are a mix of class and xml files copy them all to your PC.
You will have to decompile the class file to get java files (Jad is s good tool to do this). Copy the java files to your project directory.
You will then have to import these files into your project using File-->Import.
Hopefully this is a good start.

Modifying selection screen with help of radio buttons

Hi,
In my program am using three parameters to download a three different files and I have to use radiobuttons for that.
I want to download only one file at a time.
I have used MODIF ID but it is not working for 3 Parameters but it is working for only two parameters.
Please help me out!!!!!!!!!

Hi,
check with the following code
* Parameters and Selection Options
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfm1-lifnr .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:
   r_asn RADIOBUTTON GROUP rad1 USER-COMMAND uc1 DEFAULT 'X',
   r_ers RADIOBUTTON GROUP rad1 ,
   r_830 RADIOBUTTON GROUP rad1,
   r_850 RADIOBUTTON GROUP rad1,
   r_862 RADIOBUTTON GROUP rad1,
   r_810 RADIOBUTTON GROUP rad1,
   r_820 RADIOBUTTON GROUP rad1,
   r_824 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECT-OPTIONS: s_bstae   FOR lfm1-bstae MODIF ID sd1.
PARAMETERS:
   p_ekorg   TYPE lfm1-ekorg   MODIF ID md1,
   p_evcode TYPE edp21-evcode MODIF ID md2,
   p_kappl   TYPE nach-kappl   MODIF ID md3,
   p_parvw   TYPE nach-parvw   MODIF ID md4,
   p_kschl   TYPE nach-kschl   MODIF ID md5,
   p_vakey   TYPE nach-vakey   MODIF ID md6,
   p_werks   TYPE werks_d      MODIF ID md7,
   p_bukrs   TYPE lfb1-bukrs   MODIF ID md8.
SELECTION-SCREEN END OF BLOCK b3.
*eject
* Initialization
INITIALIZATION.
* PERFORM check_authorization.
*eject
* at selection screen
*AT SELECTION-SCREEN.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF r_asn EQ 'X'
      AND ( screen-group1 = 'MD3' or screen-group1 = 'MD4'
         or screen-group1 = 'MD5' or screen-group1 = 'MD6'
         or screen-group1 = 'MD7' or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_ers EQ 'X'
      AND ( screen-group1 = 'SD1' or screen-group1 = 'MD1'
         or screen-group1 = 'MD2' or screen-group1 = 'MD3'
         or screen-group1 = 'MD4' or screen-group1 = 'MD5'
         or screen-group1 = 'MD6' or screen-group1 = 'MD7'
         or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_830 EQ 'X'
      AND ( screen-group1 = 'SD1' or screen-group1 = 'MD1'
         or screen-group1 = 'MD2' or screen-group1 = 'MD6'
         or screen-group1 = 'MD7' or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_850 EQ 'X'
      AND ( screen-group1 = 'SD1' or screen-group1 = 'MD1'
         or screen-group1 = 'MD2' or screen-group1 = 'MD6'
         or screen-group1 = 'MD7' or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_862 EQ 'X'
      AND ( screen-group1 = 'SD1' or screen-group1 = 'MD1'
         or screen-group1 = 'MD2' or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_810 EQ 'X'
      AND ( screen-group1 = 'MD3' or screen-group1 = 'MD4'
         or screen-group1 = 'MD5' or screen-group1 = 'MD6'
         or screen-group1 = 'MD7' or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_820 EQ 'X'
      AND ( screen-group1 = 'SD1' or screen-group1 = 'MD1'
         or screen-group1 = 'MD2' or screen-group1 = 'MD3'
         or screen-group1 = 'MD4' or screen-group1 = 'MD5'
         or screen-group1 = 'MD6' or screen-group1 = 'MD7' ).
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ELSEIF r_824 EQ 'X'
      AND ( screen-group1 = 'SD1' or screen-group1 = 'MD1'
         or screen-group1 = 'MD2' or screen-group1 = 'MD3'
         or screen-group1 = 'MD4' or screen-group1 = 'MD5'
         or screen-group1 = 'MD6' or screen-group1 = 'MD7'
         or screen-group1 = 'MD8').
      screen-active = '0'.
      screen-invisible = '1'.
      screen-input = '0'.
      screen-output = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
*eject
* Event top of page
TOP-OF-PAGE.
*eject
* event Start of Selection
START-OF-SELECTION.
*eject
*EVENT End-of selection
END-OF-SELECTION.
*eject
*EVENT End-of page
END-OF-PAGE.
Regards,
Vikas.
plz reward if helpful..

Songs Won't Play, Album Art Not Modifiable, ID3 Tags, Need Help

I have a 32 GB iPod Touch, Windows Vista, the latest version of iTunes and Quicktime as well as the latest iPod software.
I noticed the other day that a bunch of my songs were missing album art. I have a library with almost 7,000 songs and I have album art for everything. I went to the songs to attempt to fix the album art and noticed that it said, Album Art Not Modifiable, in the Album Art preview screen. I thought that was weird and it wouldn't let me add new album art to these albums.
I also noticed that none of these songs would play. They wouldn't play on my iPod or on iTunes. You can click play and it looks like it's going to play, but the counter never leaves "0".
I thought something was wrong with my files and that I would have to re rip or download the songs. However, by chance I opened one of the songs in Window Media Player and it worked, so I knew the files were fine.
I did a search online and found several people with the same problem and a few things to try. But nothing worked until I stumbled upon a solution of setting the ID3 tags to version "None", then setting them to version 2.4. I tried it and it worked.
But now it keeps happening, I get a new group of albums every day that won't play.
Can anyone tell me what is causing this?
How do I prevent it?
Do I really need to take every song in my library and change the ID3 tags, that could take forever?
Could anyone please help and shed some light on this.
Thank You

Thanks for replying, Please read our Operating System details before taking a guess about what 'could' be the problem...
I think I figured it out anyway, Windows Media Player might be adding extra information that iTunes does not like, either Windows Media Player and/or iTunes 7.7.1 don't conform to ID3 v2.4 standards...
Please fix your software, Apple. I know how you love to be unique and mock PC users with your one-sided advertisements but at least conform to the ID3 standards.

Needs to modify entries in search help

Hello friends,
I need to modify some entries in the search help for materials (MATNR). I have found that search help MAT1 is used for materials, and when I go inside then I am not able to get the records in the internal table(RECORD_TAB) that displays in the output.
Also the search help exit is standard, so creating a 'Z' exit and replacing in the search may effect other functionality of standard SAP also. So i need to take care of that as well.
Can anyone help me for finding the entries and where i need to modify them.
Regards,
Grover

But I face a problem because RECORD_TAB doesn't fill and data gets in from some other standard program.
I don't understand 'other standard program' - the elementary search help you are referring to does not have an exit, just a view selection. If you add the exit, then you can stop at the 'DISP' callpoint and analyze the data.
Also in that program internal table that contains entries are in a form of string and not with different fields.
Of course, RECORD_TAB is converted at runtime based on the search help definition. This is why you need to used the F4UT_* helper functions to access the data. Better yet, if you overtake the data selection, you'll have your own internal table that you can analyze before mapping it back to RECORD_TAB.

Modify behavior of Search Help

Hello all,
I need to modify the behavior of the search help for ORDERED_PROD field
We want this ORDERED_PROD to be based on the service type, for instance, when SERVICE_TYPE = '01', the ORDERED_PROD must begin with '01.'
So, what I want is when the user press F4 for the ORDERED_PROD field, and the SERVICE_TYPE has a value of '01', then the search help for ORDERED_PROD should only show the values that matches '01.*'
Can anybody help me?
Thanks in advance

Sorry, but I think that I shouldn't
The Search Help is standard, and also de search help exit.
Changing the standard is always possible, but I would like to avoid it.
What I would like is to do what you can do in step CALLCONTROL-STEP = 'PRESEL' of a search help, but I can not modify the search help exit...
Hope it clarifies our problem a little bit better...
Best Regards.

Modifying template... help?

Hi,
I'm using Motion version 1. I found a really great template at http://peterwiggins.com/motiondownload.htm... it's a moving filmstrip template. The author states in the accompanying notes that it can be easily modified to add more filstrip cells. I've played and monkied around with it, and I know that I'm a complete newbie, but I can't figure it out. Would anyone be willing top explain this to me like the Motion-idiot I am? THANKS!

I just took a look at the project, and you can just copy any of the frames that are already there (ie: Frame 1).
Move them to the start or end of the strip.
I'd turn off the Sphere filter so that it's easier to align them.
Also if you've added more frames, you may want to have the movement last longer. The Layer called "Single Frames" has it's Position animated.
Hope that helps.

Modify CSS in region help

Hi, I am using a region help type following the instructions in APEX Users Guide.
But the code generated by APEX has 2 issues:
It hasn't CSS (bgcolor hardcoded):
<table bgcolor="#CCCCCC" width="100%"><tr><td><b>Region</b>:  Acciones Generals</td>...
For every region the page helped, it generates a table with the text "Region", and I have the APEX in Spanish but "Region is not spanish".
<table bgcolor="#CCCCCC" width="100%"><tr><td><b>Region</b>:  Acciones Generals</td> ...
Which would be the solution for change the CSS and the "Region" text?
Thanks.

You owe it to yourself and your employer to learn HTML & CSS fundamentals before you monkey around with the company web site.
          http://w3schools.com/
Start by validating your code and fix reported errors. You have an extra closing </div> that doesn't belong. Also, ID names are unique identifiers. They can be used only one time per page.
          http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.hrserase.com%2Fjobs.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

I tried to install the icloud to my windows 7. pop up said the insaller encountered errors before icloud control panel 3.1 could be configured. it also said my system has NOT been modified ? can anyone help?

i tried to install icloud to my windows 7 pc. a pop up said the installer encountered errors before icloud control panel 3.1 could be configured. it also said my system has not been modified.Any advise how to modify my system?

Well.
I reinstalled Win7 64bit, same issue.
I installed Win7 32bit, installer doesn't run correctly.
Got a second new laptop, running Win7 Starter edition, 32bit, installer doesn't run correctly.
By run correctly I mean when you double click it, you get the busy cursor and some disk IO then nothing happens.
So....When's the next release of Itunes out?
Because the current one is a steaming pile of unworking crap.

Modify oracle report FTP help

Hi Guys,
I need to modify an AP report (Positive Pay) and FPT to the bank
has any one knows how to do this I am on APPS 11.5.8
Thanks In Advance

Hello!
If I have correctly understood, at not filling of some parameters the report is not formed. There can be at you in the report a condition:
where a =:p1 and b =:p2 and c =:p3
and if all parameters are filled that it turns out, for example:
where a=1 and b=2 and c=3,
if one of parameters empty, for example "a" will be:
where a=null and b=2 and c=3 - that is the report will not be generated,
Try: where a=nvl (:p1,0) and b =:p2 and c =:p3

Can someone modify this program plzzzz help................

hi i am building a small application n i need ur help . I want to take password from console in hidden format.
as i am not a good programmer plzzzz dont advice to use passwordfield or Jpasswordfield or setEcho or setEchoChar as i hav tried it .....as i am taking input from console...... if its possible plzzzzz help me
here is the code
import java.io.*;
class login
     public static void main(String[] args) throws IOException
          String name,password1="",password2="",login1="",login2="";
          char ch12[]=new char[40];
          File f=new File("PASSWORD.txt");
          BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
          if((f.exists())==true)
          System.out.println("Enter User name");
     name=br.readLine();
     System.out.println("ENTER THE PASSWORD");
     password1=br.readLine();
     login1=name+":~"+password1;
          else
System.out.println("WELCOME TO VOS FOR THE TIME PLZ ENTER THE USER NAME N PASSWORD");
System.out.println("Enter User name");
     name=br.readLine();
System.out.println("ENTER THE PASSWORD");
     password1=br.readLine();
System.out.println("plz CONFiRM THE ENTERED PASSWORD");
     password2=br.readLine();
while(!(password1.equals(password2)))
System.out.println("SORRY U HAVE Entered TWO DIFFERENT PASSWORDS");
System.out.println("plz ENTER THE PASSWORD again");
          password1=br.readLine();
System.out.println("plz CONFORM THE ENTERED PASSWORD");
     password2=br.readLine();
login1=name+":~"+password1;
byte ch[]=login1.getBytes();
     FileOutputStream out=new FileOutputStream(f);
     out.write(ch);
     out.close();
System.out.println("USER NAME AND PASSWORD IS SAVED");
     System.out.println("ENTER USERNAME AND PASSWORD TO LOGIN");
     System.out.println("Enter User name");
     name=br.readLine();
     System.out.println("ENTER THE PASSWORD");
     password1=br.readLine();
     login1=name+":~"+password1;
          FileInputStream fis=new FileInputStream(f);
          int x=fis.available();
          for(int i=0;i<x;i++)
          ch12=(char)fis.read();
          login2=login2+ch12[i];
     if(login1.equals(login2))
System.out.println("LOGIN IS SUCCCESSFUL");
else
     System.out.println("INCORRECT USER NAME OR PASSWORD");
do
System.out.println("AUTHENTICATION FAILS");
System.out.println("PLZ ENTER THE USER NAME AGAIN");
     name=br.readLine();
System.out.println("PLZ ENTER THE PASSWORD AGAIN");
password1=br.readLine();
login1=name+":~"+password1;
          if(login1.equals(login2))
System.out.println("LOGIN IS SUCCESSFUL");
          while(!(login1.equals(login2)));
Message was edited by:
omerali0527

You need the latest JDK for this:
http://java.sun.com/javase/6/docs/api/java/io/Console.html
look at the readPassword() method.
Next time please
- use code tags (http://forum.java.sun.com/help.jspa?sec=formatting);
- stop using that silly sms-language (plz = please, u = you, n = and).
Thanks

Modifying iPhone MoveMe Sample - HELP!

i've created a new project and i'm starting from the code in the MoveMe iphone demo application. i've created the new project based on UIView, and have recreated all the files from the MoveMe sample (although i've changed some of the file names). i've copied or recreated all the resources files, and everything looks good EXCEPT:
i cannot get the two graphics frameworks (quartzcore and coregrahics) to build!
i get 416 errors, all seemingly in the coregraphics framework. (i have the path to the framework exactly matching the moveme demo, which builds fine.) here's what the build looks like. it starts normally enough:
+Building target “eRope” of project “eRope” with configuration “Debug” — (416 errors, 2 warnings)+
+ Checking Dependencies...+
everything builds fine until it gets to this:
+In file included from+
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0. sdk/System/Library/Frameworks/CoreGraphics.framework/Headers/CGColorSpace.h:11,
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0. sdk/System/Library/Frameworks/CoreGraphics.framework/Headers/CGDataProvider.h:10 2:
+error: syntax error before 'CGAVAILABLESTARTING'+
this goes on with the same sort of error repeated over and over.
i'm really confused. this porject looks identical to the moveme project, but i'm clearly missing something. any help GREATLY appreciated!
mark

I found the solution in another thread:
1) XCode Menu: ->Project -> Edit Active Target
2) Select Build Tab
3) Find "Framework Search Paths" under Search Paths section
4) Double Click to Edit
5) Delete all lines.
6) Rebuild Project

User Exit "FORM USEREXIT_AVAILABILITY_IN" in RV03VFZZ

Hello Experts,
Is there a way to find out what global data (fields, variables) are available for me to view/change in this user exit? I'm new to exits mods, please let me know how would I go about in getting this info. Thanks.

We can change other fields also and We can't change the field US_ATPPR as it is the importing parameter.
For example:
You can change any entry in the Internal table MDVEX which is the "Availability check result" internal table.
The flag US_ATPPR is kind of the Importing parameter to the Subroutine, not the CHANGING. You can use this flag to determine your course of action. Like
* US_ATPPR: ATP or forecast check (if blank)
IF US_ATPPR is INITIAL.
* do something
ELSE.
* do something
ENDIF.
Regards,
Naimesh Patel

Modify USEREXIT_AVAILABILITY_IN in RV03VFZZ help.

Similar Messages

Maybe you are looking for