Modify value of a field using a function - Form Personalization

Hi everyone I am doing a simple form personalization where i have to update a form field.
I have written a function and run it on the database that will modify the value.
But am not able to pass the value to the function .
Action Type: Property
Object Type: Item
Target Object: TACC_ACC_ASSGN.ACCOUNTING_FLEX
Property Name: VALUE
Value: apps.<myFunctionName>(the field value that i need to change)
But am not able to provide the field value.
Can anyone help me please.
Regards
Lutchumaya

I think you have to pass in this fashion:
{$:FUNCTION_NAME.FIELD_NAME} in order for the database function to understand the value of the field.
Thanks
Nagamohan

Similar Messages

  • Modify DB by single field using Field Symbol

    Hi,
      please help me ,actually i have not use the field symbol in any object. i have one requirement ,i have to modify the DB by field STATUS using Field symbol ,
    I am sending u my code so please help me how can i modify DB using field symbol..
              gw_msg3_status1   = k_status1 .
              LOOP AT gi_msg3 INTO gs_msg3.
                gs_msg3-status  = gw_msg3_status1 .
                gs_msg3-issue   = lw_issuno.
           MODIFY gi_msg3 FROM gs_msg3 TRANSPORTING status.
                MODIFY gi_msg3 INDEX sy-tabix FROM gs_msg3 TRANSPORTING issue status.
              ENDLOOP.
    Thanks & Regards,
    Meenakshi

    perform dboperation_table using 'SET' 'BIRTHDT' '=' <fs>.
        perform dboperation_table using 'WHERE' 'PARTNER' '='  <fs>
        perform dboperation_update using 'BUT000'.
    form dboperation_table
    using p_type
          p_var1
          p_var2
          p_var3.
      data: t_l type cmst_str_data.
      data: d_cx_root            type ref to cx_root,
            d_text               type string.
      try.
          clear t_l.
          if p_var3 is not initial.
            t_l = p_var3.
            condense t_l.
            concatenate '''' t_l '''' into t_l.
          endif.
          concatenate p_var1 p_var2 t_l into t_l
          separated by space.
          case p_type.
            when 'SET'.   append t_l to g_s_t.
            when 'WHERE'. append t_l to g_w_t.
          endcase.
        catch cx_root into d_cx_root.
          d_text = d_cx_root->get_text( ).
          message a398(00) with  d_text.
      endtry.
    endform.                    "DBOPERATION_table
    form dboperation_update
    using  p_tabname type zdboperation-tabname.
      data: tabname type bus_table.
      data: d_cx_root            type ref to cx_root,
            d_text               type string.
      try.
          tabname-tabname = p_tabname.
          call function 'ZDBOPERATION_UPDATE'
            in update task
            exporting
              tabname     = tabname
            tables
              where_table = g_w_t
              set_table   = g_s_t.
        catch cx_root into d_cx_root.
          d_text = d_cx_root->get_text( ).
          message a398(00) with  d_text.
      endtry.
    endform.                    "DBOPERATION_update
    Hope it will help you.
    Regards,
    Madan.

  • Drop down values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

    Hi all,
    I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT"  to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
    Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
    Thanks in advance
    ** FYI...i am using the below code:
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    Thanks,
    Koushik

    Hi all,
    I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT"  to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
    Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
    Thanks in advance
    ** FYI...i am using the below code:
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    Thanks,
    Koushik

  • Dropdown values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

    Hi all,
    when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
    i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT"  and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
    And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT"  when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
    FYI...it is showing the below popup screen ..
    Thanks,
    Koushik

    hi Feiyun,
    below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
    DATA: ls_control         TYPE zsfi_fiupload_control,
             ls_header          TYPE zsfi_fiupload_header_v13,
             ls_item            TYPE zsfi_fiupload_item_v13,
             ls_trailer         TYPE zsfi_fiupload_control,
             l_line_count       LIKE zsfi_fiupload_control-rec_count,
             l_current_curr     TYPE kcde_cells-value,
             l_current_postdate TYPE kcde_cells-value,
             l_current_compcode TYPE kcde_cells-value,
             l_currentrow       TYPE kcde_cells-row,
             l_filename         LIKE rlgrap-filename.
       DATA: BEGIN OF lt_intern OCCURS 0.
               INCLUDE STRUCTURE  kcde_cells.
       DATA: END OF lt_intern.
       DATA: BEGIN OF lt_items OCCURS 0,
               a TYPE kcde_cells-value,
               b TYPE kcde_cells-value,
               c TYPE kcde_cells-value,
               d TYPE kcde_cells-value,
               e TYPE kcde_cells-value,
               f TYPE kcde_cells-value,
               g TYPE kcde_cells-value,
               h TYPE kcde_cells-value,
               i TYPE kcde_cells-value,
               j TYPE kcde_cells-value,
               k TYPE kcde_cells-value,
               l TYPE kcde_cells-value,
               m TYPE kcde_cells-value,
               n TYPE kcde_cells-value,
               o TYPE kcde_cells-value,
               p TYPE kcde_cells-value,
               q TYPE kcde_cells-value,
               r TYPE kcde_cells-value,
               s TYPE kcde_cells-value,
               t TYPE kcde_cells-value,
               u TYPE kcde_cells-value,
               v TYPE kcde_cells-value,
               w TYPE kcde_cells-value,
               x TYPE kcde_cells-value,
               y TYPE kcde_cells-value,
               z TYPE kcde_cells-value,
               aa TYPE kcde_cells-value,
               ab TYPE kcde_cells-value,
               ac TYPE kcde_cells-value,
               ad TYPE kcde_cells-value,
               ae TYPE kcde_cells-value,
               af TYPE kcde_cells-value,
               ag TYPE kcde_cells-value,
               ah TYPE kcde_cells-value,
               ai TYPE kcde_cells-value,
               AJ TYPE KCDE_CELLS-VALUE,
               AK TYPE KCDE_CELLS-VALUE,
               END OF lt_items.
       l_filename = p_flpath.
    * the file must be an xls file, not xlsx or comma seperated
       IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
         MESSAGE i261(zfi).
         g_error = 'X'.
         EXIT.
       ENDIF.
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    * validate that the format is in the restatement format
    *  this is the only template to have the ledger group in cell G-2
    **  READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
    **  IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
    **    MESSAGE i260(zfi).
    **    g_error = 'X'.
    **    EXIT.
    **  ENDIF.
    * create control record values
       ls_control-rec_type = 'C'.
       ls_control-global_id = 'GLU-03000'.
       ls_control-local_id = ''.
       ls_control-rec_count = ''.
       CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
       ls_control-version = '12'.
       ls_control-email = ''.
       ls_control-eor = 'X'.
       ls_trailer = ls_control.
    * open output file and add the control record
       OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
       TRANSFER ls_control TO p_unixfilename.
    * create header record values, will be transfered to file in the item loop
       ls_header-rec_type = 'H'.
       READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
       IF sy-subrc = 0.
         ls_header-header_txt = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH key row = '0020' col = '0002'.
       IF sy-subrc = 0.
         ls_header-comp_code = lt_intern-value.
       ENDIF.
    ************doc date
       READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
       IF sy-subrc = 0.
         ls_header-pstng_date = lt_intern-value.
       ENDIF.
    ************posting date
         ls_header-doc_date = sy-datum.
       READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
       IF sy-subrc = 0.
         ls_header-doc_type = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
       IF sy-subrc = 0.
         ls_header-ref_doc_no = lt_intern-value.
       ENDIF.
    ************currency moved to line items
         READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
       IF sy-subrc = 0.
       ls_header-currency = lt_intern-value.
       ENDIF.
       ls_header-trans_date = ''.
       READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
       IF sy-subrc = 0.
         ls_header-period = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
       IF sy-subrc = 0.
         ls_header-reason_rev = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
       IF sy-subrc = 0.
         ls_header-rev_date = lt_intern-value.
       ENDIF.
    *  READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
    *  IF sy-subrc = 0.
         ls_header-ledger_grp = ''.
    *  ENDIF.
    *  READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
    *  IF sy-subrc = 0.
         ls_header-exch_rate = ''.
    *  ENDIF.
       READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
       IF sy-subrc = 0.
         ls_header-calc_tax = lt_intern-value.
       ENDIF.
       ls_header-eor = 'X'.
    * loop at the line items and append them to a table with multiple columns
       LOOP AT lt_intern WHERE row GE 20.
         IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
           APPEND lt_items.
           CLEAR lt_items.
         ENDIF.
         l_currentrow = lt_intern-row.
         CASE lt_intern-col.
           WHEN '0001'. lt_items-a = lt_intern-value.
           WHEN '0002'. lt_items-b = lt_intern-value.
           WHEN '0003'. lt_items-c = lt_intern-value.
           WHEN '0004'. lt_items-d = lt_intern-value.
           WHEN '0005'. lt_items-e = lt_intern-value.
           WHEN '0006'. lt_items-f = lt_intern-value.
           WHEN '0007'. lt_items-g = lt_intern-value.
           WHEN '0008'. lt_items-h = lt_intern-value.
           WHEN '0009'. lt_items-i = lt_intern-value.
           WHEN '0010'. lt_items-j = lt_intern-value.
           WHEN '0011'. lt_items-k = lt_intern-value.
           WHEN '0012'. lt_items-l = lt_intern-value.
           WHEN '0013'. lt_items-m = lt_intern-value.
           WHEN '0014'. lt_items-n = lt_intern-value.
           WHEN '0015'. lt_items-o = lt_intern-value.
           WHEN '0016'. lt_items-p = lt_intern-value.
           WHEN '0017'. lt_items-q = lt_intern-value.
           WHEN '0018'. lt_items-r = lt_intern-value.
           WHEN '0019'. lt_items-s = lt_intern-value.
           WHEN '0020'. lt_items-t = lt_intern-value.
           WHEN '0021'. lt_items-u = lt_intern-value.
           WHEN '0022'. lt_items-v = lt_intern-value.
           WHEN '0023'. lt_items-w = lt_intern-value.
           WHEN '0024'. lt_items-x = lt_intern-value.
           WHEN '0025'. lt_items-y = lt_intern-value.
           WHEN '0026'. lt_items-z = lt_intern-value.
           WHEN '0027'. lt_items-aa = lt_intern-value.
           WHEN '0028'. lt_items-ab = lt_intern-value.
           WHEN '0029'. lt_items-ac = lt_intern-value.
           WHEN '0030'. lt_items-ad = lt_intern-value.
           WHEN '0031'. lt_items-ae = lt_intern-value.
           WHEN '0032'. lt_items-af = lt_intern-value.
           WHEN '0033'. lt_items-ag = lt_intern-value.
           WHEN '0034'. lt_items-ah = lt_intern-value.
           WHEN '0035'. lt_items-ai = lt_intern-value.
           when '0036'. lt_items-aj = lt_intern-value.
           when '0037'. lt_items-ak = lt_intern-value.
         ENDCASE.
       ENDLOOP.
       APPEND lt_items.
    * sort rows by the post date, comp code, curr.
    *  SORT lt_items BY ah a ai.
    * loop at the items, creating a header record if the comp code, curr. or post date changes
       LOOP AT lt_items.
         ls_item-rec_type = 'I'.
         ls_item-post_key = lt_items-c.   "lt_items-b.
         IF lt_items-c GE '20' AND lt_items-c LE '39'.
           ls_item-vendor_no = lt_items-d.
         ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
           ls_item-customer = lt_items-d.
         ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
           ls_item-asset = lt_items-d.
         ELSE.
           ls_item-gl_account = lt_items-d.
         ENDIF.
         ls_item-asset_type = lt_items-m. "lt_items-l.
         ls_item-trans_type = lt_items-n. "lt_items-m.
         ls_item-print_flag = ''.
         ls_item-item_text = lt_items-j. "lt_items-i.
         ls_item-comp_code = lt_items-b. "lt_items-a.
         ls_item-bus_area = ''.
         ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
         ls_item-tax_code = lt_items-q. "lt_items-p.
         ls_item-taxjurcode = lt_items-r. "lt_items-q.
         ls_item-profit_ctr = lt_items-g. "lt_items-f.
         ls_item-costcenter = lt_items-h. "lt_items-g.
         ls_item-orderid = lt_items-ac. "lt_items-ab.
         ls_item-wbs = lt_items-i. "lt_items-h.
         ls_item-trade_id = lt_items-o. "lt_items-n.
         ls_item-part_prctr = lt_items-p. "lt_items-o.
         ls_item-material = lt_items-t. "lt_items-s.
         ls_item-salesorg = lt_items-aa. "lt_items-z.
         ls_item-distr_chan = lt_items-ab. "lt_items-aa.
         ls_item-pmnttrms = ''.
         ls_item-pmtmthd = ''.
         ls_item-pmtmthsupl = ''.
         ls_item-alt_payee = ''.
         REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
         REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
         ls_item-amt_doccur = lt_items-e. "lt_items-d
         REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
         REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
         ls_item-loc_amt = lt_items-f. "lt_items-e
         ls_item-loc  = lt_items-k. "lt_items-j.
         ls_item-sas_revtype = lt_items-s. "lt_items-r.
         ls_item-rev_type = lt_items-u. "lt_items-t.
         ls_item-rev_chnl = lt_items-v. "lt_items-u.
         ls_item-bill_to = lt_items-x. "lt_items-w.
         ls_item-payer = lt_items-z. "lt_items-y.
         ls_item-ship_to = lt_items-y.
         ls_item-tax_amnt = lt_items-x.
         ls_item-func_area = ''.
         ls_item-expend_date = lt_items-ae. "lt_items-ad.
         ls_item-wtax_code = lt_items-af. "lt_items-ae.
         ls_item-wtax_base = lt_items-ag. "lt_items-af.
         ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
         ls_item-payment_block = ''.
         ls_item-grp_amt = ''.
         ls_item-anc_amt = ''.
         ls_item-permit_payee = ''.
         ls_item-value_date = ''.
         ls_item-pernr   = ''.
         ls_item-legacy1 = ''.
         ls_item-legacy2 = ''.
         ls_item-legacy3 = ''.
         ls_item-legacy4 = ''.
         ls_item-legacy5 = ''.
         ls_item-legacy6 = ''.
         ls_item-legacy7 = ''.
         ls_item-legacy8 = ''.
         ls_item-legacy9 = ''.
         ls_item-legacy10 = ''.
         ls_item-eor = 'X'.
         TRANSLATE lt_items-ai TO UPPER CASE.
         TRANSLATE lt_items-b TO UPPER CASE.
         TRANSLATE lt_items-a TO UPPER CASE.
         TRANSLATE lt_items-aj TO UPPER CASE.
         IF l_current_curr <> lt_items-a "lt_items-ai
           OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
           OR l_current_compcode <> lt_items-b.
           l_current_curr = lt_items-a.
           l_current_postdate = ls_header-pstng_date. "lt_items-aj.
           l_current_compcode = lt_items-b.
           ls_header-comp_code = l_current_compcode.
           ls_header-currency = l_current_curr.
           ls_header-pstng_date = l_current_postdate.
           ls_header-doc_date = l_current_postdate.
           TRANSFER ls_header TO p_unixfilename.
           l_line_count = l_line_count + 1.
         ENDIF.
         TRANSFER ls_item TO p_unixfilename.
         l_line_count = l_line_count + 1.
       ENDLOOP.
       ls_trailer-rec_type = 'T'.
       ls_trailer-rec_count = l_line_count.
       TRANSFER ls_trailer TO p_unixfilename.
       CLOSE DATASET p_unixfilename.
    * change the format to fixed format for the remainder of the load program
       p_fixed = 'X'.
       p_rstmnt = ''.
    Thanks,
    Koushik

  • Multiple Value in additional fields using SAP Query

    HI All,
    I have a question related additional field in SAP Query. I tried to create report about PR and PO using SAP Query. Since one PR can be converted to multiple PO, I decided to create additional field
    po_1
    to display the value of PO that related to the PR. But I meet problem when I want to show several PO number in additional field
    po_1
    , I couldn't look the way to solve this problem. Can anybody help me? Just for info, I assign value to additional field
    po_1
    in record processing part.
    Thanks....

    HI,
    IN SQ02, IF table is already in JOIN, just click on the PLUS sign to expand the strcture.
    All the field showing Plus sign in the strcture are selected in your query and with MINUS sing are no selected.
    So you have to just click on the MINUS sign for the field you want to use through table field.
    Generate the query and execute thriugh SQ01.
    If you want to add some other field which is not a part of JOIN,
    then click on EXTRAS Button shown in the MENU option.
    Click on Create button and system will ask abt the additional field.
    Regds,
    Anil

  • Extracting Text Field using a function module

    Hi Experts,
          We are trying to extract a test field from the R3 using a Function Module.
                  The Text from R3 Looks like this
                 Input Parameters
                  ID -1
                  SEQ 2
    It displays
              Column 1 Column2
               This is test
               strategy for Function
               Module xxxx
    So we put in some parameters to get this test field displayed. As you see the above is just one field but they are in different lines
            So what happens when we put in the database is it adds a new field
    Eg
    ID SEQ Column 1 Column2
    1   2        *            This is test
    1   2        *            strategy for Function
    1   2        *            Module xxxx
    The result that we need is
    D SEQ Column 1 Column2
    1   2        *            This is test strategy for Function Module xxxx
    How can we handle this in the Query Transform
    Your help in advance is appreciated.
    Thanks
    Edited by: alangilbi on Nov 17, 2010 3:49 AM

    Have you considered using a pivot transform to get your rows into columns and then a query transform to concatenate the columns together?

  • Not allows to assign default value to input field using values in datastore

    Hi Masters,
    Consider that I have one input field in a form. I should assign default value to it. I should assign to it, the value which i have stored in a datastore. When i run the application, if i give default value as 123 ,then it is working fine i.e., it is showing 123 in the textfield in form , but if i give the default value as STORE@ProductId, then it is not displaying that value in the form.
    Please help me out.
    Thanks & Regards,
    Kaushik Sreeram

    Hi,
    i faced this problem and here's what i concluded:
    There's no way you can set default value for input field dynamicly, since the default value of input control is caculated only once (i think on initializing of the iView). The input control and the data store are initialized at the same time, STORE@productID is empty that time...
    If you don't need to recieve value through the input field you're trying to initialize, but just to display the value from the store - I suggest you try using another control - Expression Box. It's value is calculated continiously, just like the Label's, and you can refere to it later.
    Regards,
    Yulia

  • Populating values in dropdown fields on interactive adobe forms.

    Hi,
    In HCM Forms & Process, I have populated dropdown fields using generic service. But today I came to know we can also populate the dropdown field values using webdynpro lookup tables. First question, Is that a wrong method to populate the dropdown field values using generic service. Second question, If I populate the dropdown field values using lookup tables does the performance will increase when compared to populating from generic service. Please let me know.
    Regards,
    Nayani.

    Hi,
    In HCM Forms & Process, I have populated dropdown fields using generic service. But today I came to know we can also populate the dropdown field values using webdynpro lookup tables. First question, Is that a wrong method to populate the dropdown field values using generic service. Second question, If I populate the dropdown field values using lookup tables does the performance will increase when compared to populating from generic service. Please let me know.
    Regards,
    Nayani.

  • Multi Value User Defined field on OIM user form

    Hi Everyone,
    I have a requirement where i need to assign multiple resources to user as per access policy. These resources should be assign by virtue of some role (custom attribute as of now). The specific requirement is that one user may have multiple roles (and hence resources) and all these values should capture in any user defined field. As the requirement contains multiple Roles so we have to create multi-value user defined field for User form to capture all these role values under single attribute. Does OIM provides any such multi-value field OOTB (lookup, drop down--any customize way we can make them multivalue)?

    He's right. Multi Valued attributes on the User Profile are not available in OIM. If you want to do this, and you have a finite number of possible roles, you can create UDFs for each and map a checkbox or something to it if the user has that value. Then base your acccess policies off those.
    -Kevin

  • Get maximum value in a field using SQL query

    Hi,
    I want to retrieve the row containing the maximum value for a particular field.
    select max(fieldname) from tablename
    How do I do this using database connectivity toolkit.
    Shiva

    Hello,
    I figured out the answer. It was sql syntax.
    Thanks for coming in here to help.
    I created another post earlier because I had a little different question that pertained to fetch.vi.  How do you get an array out from fetch.vi without creating error. I also made type an array also but it does not allow an array.
    Thanks for your help.
    By the way, how do I as the original poster get rid of a whole thread I created, especially if its a duplicate.

  • Assigning values to 2 fields using sql statement

    db11g , apex 4.0 and firefox 24 ,
    hi all ,
    i am trying to follow this tutorial to assign values to 2 items on a page using sql statement ,
    and i am using the same sql statement the tutorial uses
    select d.loc location, count(e.empno) num_employees from dept d, emp e where d.deptno = e.deptno(+) and d.deptno = :P3_DEPTNO group by d.loc -- btw , what does the "+" sign mean?
    after the e.deptno in the where condition .
    but i am facing this error
    1 error has occurred
    Wrong number of columns selected in the SQL query. See Help of attribute for details.
    and it does not work with two columns in the select statement under any conditions , i tried to remove the group function and the group clause ,
    it does not work unless i use only one column in the select statement ??
    thanks

    Pars
    And how exactly is this rewrite of the sql statement resolving the OP's issue.
    You are still using more than 1 column which will still result in the error message:
    Wrong number of columns selected in the SQL query.
    As mentioned in my earlier post APEX 4.0 (the version the OP is using) does not handle a sql statement with multiple columns for the dynamic action Set Value.
    Which means the fastest  and simplest solution is splitting up the dynamic action in multiple Set Value actions.
    Using this plugin or upgrade to a newer apex version would also be a possibility.
    Nicolette

  • Display of calculated field value in same field using form personalization.

    Hi All,
    What could be the solution, if i want to have the formula on same display field.
    say..your entering value in grams and convert into ml in the same field of (:Q_RES.DISPLAY5)
    Conversion formula:
    (TO_CHAR(TO_NUMBER(:Q_RES_DISPLAY5)-(0.35))/((1.025)*(0.9986))/3)
    When I move out of THIS field, it should convert using above formula and store it in same field.
    Appreciate your efforts.
    Thanks a lot...

    What could be the solution, if i want to have the formula on same display field.
    say..your entering value in grams and convert into ml in the same field of (:Q_RES.DISPLAY5)
    Conversion formula:
    (TO_CHAR(TO_NUMBER(:Q_RES_DISPLAY5)-(0.35))/((1.025)*(0.9986))/3)
    When I move out of THIS field, it should convert using above formula and store it in same field.
    Appreciate your efforts.

  • Ad-Hoc Query Field using HR_99S_INTERVAL_BETWEEN_DATES function module

    I have created an additional field in Sq02 to calculate years between two dates and am using function module HR_99S_INTERVAL_BETWEEN_DATES.
    There are no syntax erros but when I run a query in Sq01 and output the field it doesn't calculate instead gives "00000" output.
    The field Code in the additional field
    Clear ZHR_SERVICEYRS.
    DATA: V_MONTHS TYPE  i.
    DATA: V_YEARS TYPE  i.
    DATA: V_MONTHS1 TYPE  char20.
    DATA: V_YEARS1 TYPE  char20.
    CALL FUNCTION 'HR_99S_INTERVAL_BETWEEN_DATES'
      EXPORTING
       BEGDA           = P0002-GBDAT
       ENDDA           = Sy-Datum
      TAB_MODE        = ' '
    IMPORTING
      DAYS            =
      C_WEEKS         =
       C_MONTHS        = V_MONTHS
       C_YEARS         = V_YEARS
      WEEKS           =
      MONTHS          =
      YEARS           =
      D_MONTHS        =
      MONTH_TAB       =
    V_MONTHS1 = V_MONTHS.
    V_YEARS1 =  V_YEARS.
    CONCATENATE V_YEARS1  '.'  V_MONTHS1 INTO ZHR_SERVICEYRS.
    condense ZHR_SERVICEYRS.
    has anybody had similar problems! Help Appreciated!

    Hi Anuj,
    Yes, you use Transaction Code SQ02.  Find your infoset on the list - if you want to create a new infoset you can do so.  If it is an existing infoset, select it and Change.  On the next screen you will see all the infotypes in that infoset on the left.  The fields available for Ad Hoc are on the right.  Open the infotype table on the left and the field group on the right.  If the field is not included in the field group all you have to do is drag and drop from the list on the left to the correct field group.  If the infotype is not already in your infoset, select Edit --> Change Infotype Selection from the top menu bar.  Place a check in the new infotype and then return and do the drag and drop if necessary.  You will find the basic fields already moved to the field group. 
    You say you want information from IT0008-Basic Pay and IT1005-Planned Compensation.  Problem is that if you use the standard HR logical data base, there is no link directly between a person and IT1005.  IT1005 is assigned to a Position or a Job.  If it is assigned to a Position, you can select the "Change Infotype Selection" action and ago to the bottom of the list to Related Objects.  Here select Position and open that to find the IT1005.  If the IT1005 is tied to the Job, there is no direct link. Thus, if it does not already exist, you will need to create an infoset based on the PCH logical database and object Position.  Now you can link that Position to "Holder"-Person and "Described by"-Job.  Again, select the infotypes and fields you want and you will be able to obtain your information via Ad Hoc Query based on that infoset.
    Paul

  • Copy a field value to another field using scripting

    Iam trying to capture a ALV grid fieldss using the scripting.
    we have a ALV grid in my R/3 program and in that there are 2 date fields VALUTL and VALUTP with 2 rows. Now if the date is blank in any of the field then value that exist in the corresponding field should be copeid.
    Do i need to loop the grid values ?
    Could any one you help me in corecting the below code.
    session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").modifyCell 0,"VALUTP","19.04.2011"
    session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").modifyCell 0,"VALUTL","06.06.2011"
    session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").currentCellColumn = ""
    session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").selectedRows = "0"
    session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").pressToolbarButton "UPDA"
    Thanks,

    Iam missing something in the below code.Not able to update the date in the feild that was empty.Could some check
    Set GRID = session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell")
    RowCT = GRID.RowCount
    For Row = 0 To RowCT - 1
    GRID.setCurrentCell Row, "VALUTL"
    GRID.selectedRows = CStr(Row)
    cell = GRID.getcellvalue(Row, "VALUTL")
    cell1 = GRID.getcellvalue(Row, "VALUTP")
    If cell <> "" And cell1 <> "" Then
        GoTo 50
    End If
    Next
    50 For Row = 0 To RowCT - 1
        GRID.setCurrentCell Row, "VALUTL"
        GRID.selectedRows = CStr(Row)
        valu = GRID.getcellvalue(Row, "VALUTL")
        valp = GRID.getcellvalue(Row, "VALUTP")
        If valu = "" Then
           session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").modifyCell Row, "VALUTL", cell
           session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").pressToolbarButton "UPDA"
           session.findById("wnd[1]/tbar[0]/btn[0]").press
        ElseIf valp = "" Then
            session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").modifyCell Row, "VALUTP", cell1
            session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").pressToolbarButton "UPDA"
            session.findById("wnd[1]/tbar[0]/btn[0]").press
        ElseIf RowCT = GRID.RowCount Then
            'session.findById("wnd[0]/usr/cntlSCREEN_9001/shellcont/shell").pressToolbarButton "UPDA"
       'session.findById("wnd[1]/tbar[0]/btn[0]").press
        End If
       Next

  • Get Node value inside Transform activity using any function

    <xsl:when test="\ns0:data = *+Value of Xml node(NODE)+*">
    </xsl:when>
    At value of XML node i want to put the value of one xml node. is there any function in transform to get the content of node.
    Thanks
    vivek
    Edited by: 809104 on Nov 14, 2010 9:29 PM

    I got the solution
    we can use variable inside transform and assign xpath value to that variable then we can use that variable inside test condtition
    <xsl:variable name="name" select="xpath"/>
    <xsl:when test="\ns0:data = $name">
    </xsl:when>

Maybe you are looking for