Modifying MB51 report...help plea...have ur points.

Hi all,
I m adding MATKL field in the selection of MB51 report, when i took matkl in select option and write selection text in the text elements, it is not getting reflect in the output..
eg. select-options matkl for mara-matkl.
text-element->selection-text-> 'Enter material group' -> activate.
This message is not reflecting in the selection screen..
Please help me & have ur points.

Hi all,
When i log on to DE (geman), i m getting selection text.
But when i log on to EN(english), i m getting MATKL.
Pleas help me yaar..
thanx in advance..
reply

Similar Messages

While opening most of the website i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before. Kindly help.

while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

Field symbols in ...........in SE24....have ur points..pleas

Hi all,
I want to declare a field symbol <fs> in a class, & to use it in different methods of the same class.
But in attributes of the class, how i declare field symbol in a class.
I m not able to do this...
Pleas assist me..& have ur points.
Regards,
pradeep phogat

Pradeep,
See this thread. It gives details about field symbol used in a standard class. This should give you some idea.
Re: Field Symbol
ashish

Grid in MB51.....have ur points....urgent

Hi,
In MB51 report, firsly i get Hiearchical grid, then ALV grid after clicking of Detail list button.
Now when I search for 'Resue_alv_grid_display' in RM07DOCS, i m not getting results.
Actually i want to modify it, some req...
Please let me know what i need to search, to navigate to the fieldcatalog of second grid
Regards,
pradeep phogat

Hi,
Check this in the program RM07DOCS
Look for subroutine : DETAIL_LIST
FORM detail_list.
DATA: variant_detail LIKE disvariant.
DATA: lt_base_list LIKE list[]. "401421
* The detail ALV may modify the list (sorting). If returned to the
* base list, the original list needs to be restored.
lt_base_list[] = list[]. "401421
CLEAR variant_detail.
variant_detail-report = alv_repid.
variant_detail-handle = 'DETA'.
detail = 'X'.
CALL FUNCTION alv_detail_func
 EXPORTING
 i_callback_program = alv_repid
 i_callback_pf_status_set = 'SET_STATUS'
 i_callback_user_command = 'USER_COMMAND'
 is_layout = alv_layout
 it_fieldcat = fc_flat[]
 i_default = 'X'
 i_save = 'A'
 is_variant = variant_detail
 is_print = alv_print
 TABLES
 t_outtab = list[]
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR detail. "401421
list[] = lt_base_list[]. "401421
ENDFORM. "detail_list
Hope this clarifies
Regards
Nishant

Help abapers common, do help me n have ur point.s.

Hi all,
We say LSMW is for standard screens and BDC is for customized screen. Could any body tell me, wht is the meaning of this, as LSMW use session inside....
Pleas clarify & have ur point.s
Regards,
[email protected]

Hi,
Check these related threads.
Diff. between LSMW & BDC
Re: Diff. between LSMW and BDC???
Regards,
Sesh

Help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass

help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass

Yes
Put all the music on one computer, make sure it is authorized for all accounts, sync.

I have iTunes 11.0.1 and no matter what I do I cannot get it to open any extra windows. Double clicking does Nothing. Help Pleez.

I have iTunes 11.0.1 and no matter what I do I cannot get it to open any extra windows. Double clicking does Nothing. Help Pleez.

I certainly agree. You can comment to Apple on the matter via their feedback page, if you wish:
http://www.apple.com/feedback/itunesapp.html
Perhaps if enough of us request it, they'll put that feature back.
Regards.

POH in module pool.....have ur points..

Hi ALL,
-I took a text box with name 'AGE' in layout of the screen.
-Now i want to give F1 help to this filed.
-I used PROCESS ON HELP-REQUEST. field AGE with 'for user age'.
now i m executing the transaction & pressing F! help there...but no help
ples help me...
have ur points..
Regards,
pradeep phogat

Hi,
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be
dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the
document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
Ex.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
Regards,
Bhaskar

Reg. scheduling of program.......have ur points.

Hi all,
I want to schedule a program, so that i'll run automatically at 7 A.M in the morning for 1 year daily.
Pleas let me know step by step.
Thanx in advance& have ur points.
Regards,
pradeep phogat

HI,
Tcode SM36
Here we can Schedule the Executable Programs (Reports) in Background.
Create a Job.
Create the Steps - Assign the Report name and Variant.
Enter the Start Condition.
Save the Job.
Job status can be monitorEd in Tcode SM37
Or
Use the following function modules.
job_open
job_close
Thanks,
Reward If Helpful.

Reg. QS17 & ST05----Have ur points

Hi all,
in tcode- qs17, i want to see table where 'specification data is going on'. for that i used ST05, I got lot of tables here....now wht is the way for finding my specification fields.
Pleas help me out...
Have ur points...
Regards,
pradeep phogat

Hi,
SQL Trace
SQL trace(ST05) provides the developer with the ability to analyse database select statements. Simply execute ST05
to turn on SQL trace, then execute the statement/program you want to analyse. Now turn off SQL trace using ST05
and click on list trace to view the details.
You can also perform traces on other items such as authorisation objects.
Authorisation trace analysis 1. Open two sessions
2. Execute transaction ST01 in one of the sessions
3. Select the authorisation checkbox, note the other traces
you can perform (SQL, RFC, Table Buffer etc)
4. Click the 'Trace On' button
5. Within your other session execte the transaction/report
you want to trace or get the user in question to do it
6. Return to the session where you turned the trace on and
click on 'Trace Off' otherwise it will continue to record
all athorisation checks
7. Click on the 'Analysis' button
8. Enter appropriate data into selection screen such as
Username, type of trace records (i.e. Authorization check)
9. Click on the Execute button.
10. Report displaying trace results will now be displayed
http://www.sapdevelopment.co.uk/perform/perform_sqltrace.htm
Some useful transaction related to this are ..
ST01 SAP system trace
ST02 Buffer statistics.
ST03 Workload analysis.
ST04 Database performance analysis.
ST05 SQL trace .
ST06 Operating system monitor ...
From the recorded SQL trace you can deduce:
· Which SQL statements your application carries out
· Which values the system uses for specific database accesses and changes
· How the system translates ABAP OPEN SQL commands (such as
SELECT) into standard SQL commands
· Where your application positions COMMIT statements
· Where your application makes repeated database accesses
· What database accesses or changes occur in the update section of your
application
Look at the below links, you will get the idea
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801f89454211d189710000e8322d00/content.htm
http://www.sapbrain.com/TOOLS/SQLTRACE/SQL_TRACE.html
Check the following links:
http://www.sapbrainsonline.com/TOOLS/RUNTIMEanalysis/SAP_runtime_analysis.html
http://www.sapbrainsonline.com/TOOLS/SQLTRACE/SQL_TRACE.html

How do I modify a report to show new fields in a stored procedure?

The server uses Crystal Reports Embedded Server 2008 SP3 (running on Windows Server 2008 R2 / IIS 7.5), and I am using Crystal Reports Developer 2008 SP3 on my PC.
Hello,
I am a MSSQL database administrator with little experience with Crystal Reports. At my job, we have a need to add a couple of fields to a report. The report comes with an enterprise procurement web-based application and displays the details of a given purchase order. They want me to add the supplieru2019s address below the supplieru2019s name on the report. I was hoping there might be a fairly straight-forward, not overly complicated answer to my question.
The report works with a stored procedure (OrderForm1) which creates a temp table called #ReportParameters. It then executes another stored procedure (GetReportParameters), in which it uses 'sp_xml_preparedocument' and eventually 'sp_xml_removedocument'. It then executes a stored procedure called (OrderForm1Main) which contains the select statement that brings in the bulk of the fields and joining the pertinent tables. I made a backup copy of OrderForm1Main and modified the original, to include the supplier address fields.
Don't know if I'm on the right track, but hereu2019s what I tried so far:
When I open the OrderForm1.rpt in Crystal Designer, I have found that I can go to Database > Set Datasource Location, create a connection (OLE DB (ADO)) to the database, highlight the name of the stored procedure under u2018Current Data Sourceu2019, then find the same stored procedure in the database in the section u2018Replace withu2019:
http://i.imgur.com/KXBuf.png
When I clicked the u2018Updateu2019 button, a u2018Enter Valuesu2019 for parameters window pops up:
http://i.imgur.com/5uQ9V.png
Iu2019m confused as to what to do at this part. Whether I click u2018OKu2019 or u2018Cancelu2019, it then adds my database connection with stored procedure to the list in the u2018Current Data Sourceu2019 section:
http://i.imgur.com/aD4KH.png
After completing this data source change, in the Field Explorer under Database Fields > OrderForm1, it then includes the new fields I added to the stored procedure. However, when dragging the new supplier address fields to the report layout, saving the report in this state, and trying to run it in the web application, the report window displays the message u2018Missing parameter valuesu2019 instead of the report:
http://i.imgur.com/gz8S3.png
In Field Explorer > Database Fields > Parameters, Iu2019m seeing a list of parameters that arenu2019t the exact ones in the stored procedure, which leads me to believe, they are somehow defined in the report itself. Also, under u2018Parameter Fieldsu2019 in the Fields Explorer there is the @fParameters listing with a question mark icon, that appeared since the data source change:
http://i.imgur.com/llkrk.png
There does not seem to be an equivalent set of parameters in the database, as there were defined in the report. I imagine that the actual parameter values come from the data held in the currently displayed purchase order (from which you can push a button 'Print PO' that will display the report in question). I have read that when you change a data source in Crystal, you have to complete the task of resetting, or adding back in the parameters. That would be easy if they were in the database somewhere. Whenever I attempt to look at the properties of the u2018ReportInformationu2019 in u2018Set Datasource Locationu2019, or simply try Database > 'Verify Database' to refresh the datasource, an u2018ADO.NET (XML) windows pops up with a file path in it, something to the effect of:
MyLoanerLaptop\ebo bk\orderform1.xml:
http://i.imgur.com/SEVOE.png
I did a search on the entire server for the file OrderForm1.XML and could not find it anywhere. So Iu2019m thinking that the software companyu2019s development team used that file originally, to create the report (did they use a dataset to do this, or is the temporary XML file created during the process actually the schema here?). I think Iu2019m basically trying to change the data source in the report, to an updated version of the original stored procedure referenced, while still somehow leaving the parameters list in the report alone and have them still work?
Any and all help would be greatly appreciated. I realize that this type of work most likely is routine stuff that can be learned by taking the time to do so. My team is only interested in allowing me a certain amount of time and resources to delve into Crystal and we do not have a Crystal dev team. So, hopefully you understand my dilemma here.
Thank you,
Mike
Edited by: Mike_DBA on Jan 23, 2012 8:03 PM
Edited by: Mike_DBA on Jan 23, 2012 8:05 PM
Edited by: Mike_DBA on Jan 23, 2012 8:11 PM (2:12 pm EST)
Edited by: Mike_DBA on Jan 23, 2012 8:13 PM
Edited by: Mike_DBA on Jan 23, 2012 8:18 PM
Edited by: Mike_DBA on Jan 23, 2012 8:30 PM
Edited by: Mike_DBA on Jan 23, 2012 10:58 PM

Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don

IN MB51 Report price showing less at the time of Mov.221 issue for project.

Hi,
SAP Experts,
I have one issue.
In Mb51 Report i wil get less value for xyz material how?
Case: 1.Material code - 610000027.
           2.Moving Vag price - 59322 Rs
           3.Total Value           - 59322 Rs
           4.Stock                    - 1Qty.
           5.Priovus price        - 274909.23 Last price changed 02.07.2009.
           6.PO.                - 45000253.
           7.Doc.No          - 5902801452.
           8.Posting date - 04.01.2010
           9.Mov-221 issue to project.
But In Mb51 Report i wil get MATERIAL VALUE = 28832 Rs. How?
Pls Help Out...

Hi,
SAP Experts,
I have one issue.
In Mb51 Report i wil get less value for 610000027 material how?
Case: 1.Material code - 610000027.
           2.Moving Vag price - 59322 Rs
           3.Total Value           - 59322 Rs
           4.Stock                    - 1Qty.
           5.Priovus price        - 274909.23 Last price changed 02.07.2009.
           6.PO.                - 45000253.
           7.Doc.No          - 5902801452.
           8.Posting date - 04.01.2010
           9.Mov-221 issue to project.
But In Mb51 Report i wil get MATERIAL VALUE = 28832 Rs. How?
Pls Help Out...
Regards
Mahendra

How can i modify my report to print in duplex mode ?

Hello, I have a report to print orders (i use vb6 and CR XI-R2 at runtime with CrystalActiveXReportViewer object) but now i must print the payment conditions on the back of each order. What is the way to modify my report to do that.
(Is there somewhere examples of duplex printing report?).
Thanks in advance.

Hi Ludek,
I have imported the reg key but i have the same problem: you must install SP2 or SP4 before.
Here is my reg key :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94FB0978-D094-40C7-91D7-834D39220D4A}]
"AuthorizedCDFPrefix"=""
"Comments"=""
"Contact"=""
"DisplayVersion"="11.5.8.82627"
"HelpLink"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,\
70,00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,\
00,6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,\
00,00
"HelpTelephone"=""
"InstallDate"="20080416"
"InstallLocation"=""
"InstallSource"="C:
CRXIR2SP2Full
win32
"ModifyPath"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,78,\
00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,00,\
38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,39,\
00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,00,\
30,00,44,00,34,00,41,00,7d,00,00,00
"Publisher"="Business Objects"
"Readme"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,70,\
00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,00,\
6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,00,\
00
"Size"=""
"EstimatedSize"=dword:001bcc81
"UninstallString"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,\
78,00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,\
00,38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,\
39,00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,\
00,30,00,44,00,34,00,41,00,7d,00,00,00
"URLInfoAbout"=""
"URLUpdateInfo"=""
"VersionMajor"=dword:0000000b
"VersionMinor"=dword:00000005
"WindowsInstaller"=dword:00000001
"Version"=dword:0b050008
"Language"=dword:00000000
"DisplayName"="Crystal Reports XI Release 2"
Hope this helps you.
Just a precision : the message 'can't load data' not occures on all PC with runtime, At work i have installed runtime on 3 PC's (XP) and it works, problem occures when i 'm connecting to my customer's server (windows 2003 server SP2) via tse.

Urgent..getting default & changed values in ALV editable....have ur point.s

Hi all,
I m using interactive ALV grid with 1 column editable with some default values, When i m clicking on SAVE button, only the values which are changed by the user in that column are coming in the internal table, & the default values are automatically deleted by the following code....
But my requirement is to save all the default & changed values of the ALV column....
Help me out & have ur points.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
importing
 e_grid = ref1
CALL METHOD ref1->check_changed_data
IMPORTING
 e_valid =
CHANGING
 c_refresh = 'X'

Pradeep,
When ur doing the CHECK_CHANGED_DATA, u ll get the edited values inside this callback sub -routine only. so here u trap the values those are changed ( thats after editing).
Once the control goes back to the original program ( calling prog ) , u ll end up with ur old data ( before editing).
you ll have to handle that explictly in your code, or shift to OO alv grid like this -
REPORT ZSKC_GRID.
TABLES : EQUI.
DATA : BEGIN OF T_EQUI OCCURS 0,
 EQUNR TYPE EQUI-EQUNR,
 AENAM TYPE EQUI-AENAM,
 END OF T_EQUI.
DATA : T_FCAT TYPE LVC_T_FCAT,
 G_FCODE TYPE SY-UCOMM.
DATA : G_GRID TYPE REF TO CL_GUI_ALV_GRID.
SELECT-OPTIONS: S_EQUNR FOR EQUI-EQUNR.
START-OF-SELECTION.
* get data.
PERFORM SUB_GET_DATA.
* Populate catalog.
PERFORM SUB_BUILD_CATALOG CHANGING T_FCAT.
* Display the grid.
PERFORM SUB_SHOW_GRID.
CALL SCREEN 9001.
*& Form SUB_GET_DATA
* Get data
FORM SUB_GET_DATA .
SELECT EQUNR AENAM
FROM EQUI
INTO TABLE T_EQUI
WHERE EQUNR IN S_EQUNR.
IF SY-SUBRC NE 0.
* Give some message if needed
ENDIF.
ENDFORM. " SUB_GET_DATA
*& Form SUB_BUILD_CATALOG
* text
* <--P_T_FCAT text
FORM SUB_BUILD_CATALOG CHANGING PT_FCAT TYPE LVC_T_FCAT.
DATA : WA_CAT TYPE LVC_S_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'EQUNR'.
WA_CAT-TABNAME = 'T_EQUI'.
WA_CAT-REF_FIELD = 'EQUNR'.
WA_CAT-REF_TABLE = 'EQUI'.
APPEND WA_CAT TO PT_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'AENAM'.
WA_CAT-TABNAME = 'T_EQUI'.
WA_CAT-REF_FIELD = 'AENAM'.
WA_CAT-REF_TABLE = 'EQUI'.
WA_CAT-EDIT = 'X'.
APPEND WA_CAT TO PT_FCAT.
ENDFORM. " SUB_BUILD_CATALOG
*& Form SUB_SHOW_GRID
* Show grid
FORM SUB_SHOW_GRID .
* create the Grid Object.
CREATE OBJECT G_GRID
 EXPORTING
 I_PARENT = CL_GUI_CONTAINER=>SCREEN0
 EXCEPTIONS
 ERROR_CNTL_CREATE = 1
 ERROR_CNTL_INIT = 2
 ERROR_CNTL_LINK = 3
 ERROR_DP_CREATE = 4
 OTHERS = 5.
CHECK SY-SUBRC EQ 0.
* Display contents,
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 CHANGING
 IT_OUTTAB = t_equi[]
 IT_FIELDCATALOG = t_fcat
 EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 others = 4.
ENDFORM. " SUB_SHOW_GRID
*& Module STATUS_9001 OUTPUT
* text
MODULE STATUS_9001 OUTPUT.
 SET PF-STATUS 'PF_9001'.
 SET TITLEBAR 'TITLE_9001'.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9001 INPUT
* text
MODULE USER_COMMAND_9001 INPUT.
CASE G_FCODE.
 WHEN 'BACK' OR 'CANC' OR 'EXIT'.
 LEAVE TO SCREEN 0.
 WHEN 'HAVE'.
* After editing everything user presses this button.
 PERFORM SUB_GET_EDITED_DATA.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Form SUB_GET_EDITED_DATA
* Read the ALV grid and get current internal table.
FORM SUB_GET_EDITED_DATA .
DATA : T_OLD_DATA LIKE T_EQUI OCCURS 0.
* hold the old values if u need them.
t_old_data[] = t_equi[].
* This will update the global internal table.
CALL METHOD G_GRID->CHECK_CHANGED_DATA.
* Now t_equi have changed here. u have the old data in the T_OLD_DATA.
BREAK-POINT.
ENDFORM. " SUB_GET_EDITED_DATA
Create a blank screen called 9001. and Pf-staus has a buton with fcode "HAVE". ( alongwith BACK canc exit).

Report hanging (when try to modify the report)

Post Author: aneel
CA Forum: WebIntelligence Reporting
Hi All,
This becomes a longlosting issue for me Please anyone look into this.
I have created one report with 6 global and 3 local filters, 12 local variables.
When I try to modify the webi report it strucks up and keeps on running continuously with out giving any kind of result.
Please reply anyone !!!!!!!!!

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
Vinl,
The WebI (and BOE XI server) is not completely tuned out of the box to support multiple data providers and large data sets. There are tuning parameters that must be set (and which will cause more memory usage, etc, etc) and must be monitored to expand performance in order to resolve unwanted timeouts. If you are not the administrator, then you'll have to work with him or her (and possibly open a trouble ticket with tech support for more help, if needed).
The timeout aspect is frustrating. We have three servers, development, testing, and production. The development system is totally off-line and not under any security-lockdown influences. Testing is our pre-stage and was built by our BI team. And production is in the server farm built by the Sysadmins. Of the three servers, only the production server suffers from a two-minute WebI timeout (and Infoview timeouts where the report just spins all day without a response, but in WebI at least we get an ugly "error notice" when the two-minute timeout occurs). We think that some kind of lockdown was performed on our production server that causes the two-minute timeout for an executing report to occur. On the one hand it keeps us sharp in not building reports that will make the user wait a long time, and to encourage them to schedule a report through scheduler when it will take longer than two minutes to execute. On the other hand it can be troublesome to maintain a report that takes so long to run in terms of modifications and corrections. At times I've had to go into the datawarehouse and rename a production table to something else, then create a mini-version of that production table in order to run the report and modify it (all done in the off-hours of course), and then when done modifying the report, delete the mini-version of the production table and rename the off-named production table back to its original name in order to press on. The things we gotta do to press on with life.... Good luck, and hang in there Vinl.

Modifying MB51 report...help plea...have ur points.

Similar Messages

Maybe you are looking for