Modifying the Standard search process for variables in BI reports

Hi Gurus,
I am encountering the following issue while executing a report.This is related to the text of a characteristic value of an InfoObject.
In the variables screen, the F4 search help for a variable is currently case-sensitive. To be more specific, when the user gives the description "East Wind" , the F4 search help returns a value. But when the search is performed using "EAST WIND" or "east wind" or " east* ", no results are returned.
I observed a How To Document for resolving this issue in BW 3.X version. It calls for the insertion of a form routine in Function Module RSD_CHA_BUILD_QUERY. But this function Module is replaced in BI 7.0 version.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/48cfaa90-0201-0010-cebb-8ee0a29e0fc7
Request you to let me know the replacement Function Module or other ways to resolve the issue.
Regards,
Balaji
Edited by: Balaji Vijay on Apr 24, 2009 4:42 PM

Hi all,
The solution is provided by the OSS Note 1269398 - Case insensitive search in input help (F4).
Regards,
Balaji

Similar Messages

How to Modify the standard layout set for Sales Order

Hi all,
Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
Thanks in advance
Santosh R

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00 Price 130.00000 TEST 100
 Gross Value 20.12 USD 100 <-how to
 Discount Amount 0.00 USD 100
 Rebate Basis 20.12 USD 100
 Net Value for Item 20.12 USD 100
 Net Value 2 20.12 USD 100
 Net Value 3 20.12 USD 100
VPRS Cost 27.22 HKD
 Profit Margin 16.61 USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

Modifying the Standard Report template

Hi
I have a report with 10 columns and 2 of them are wb_id, pa_id. Depending on the search critiria either wb_id or pa_id will be null. I want to highlight the row with some color when I select any row and I am modifying the standard template and
column template condition is 'Use Based on PL/SQL Expression' and it is
NVL(#COL02#,0) = NVL(:GLOBAL_WB_ID,0). But when I run the report it is giving the error that encountered # wherea as expecting.......
Thans a lot.

Hi,
I have a report page uses the following block of pl/sql as its source.
This calls a function by passing page items and this functions returns sql query.
DECLARE
V_SQL VARCHAR2(4000);
BEGIN
V_SQL := WF_PCK02.search_wb_pa(
:P1000_WB_ID,:P1000_PA_ID,:P1000_RIVER_NO,:P1000_GENRE,:P1000_LOCATION,:P1000_WATER_DEPENDENT,:P1000_BASELINE,
:P1000_NBT_PRESSURE_TYPE_ID,:P1000_PURPOSE,:P1000_NBT_SIC_DESC,:P1000_ACTIVITY_DESC,:P1000_NBT_MORPH_ACTIVITY,
:P1000_SW_ASSET,:P1000_ORDER_BY,:P1000_R1);
RETURN V_SQL;
END;
Now if user is searching for water bodies the results look like this.
10317 - Allt Ceitlein SURFACE WATER River Y 2a 2b N N
10318 - Allt a Chaorainn SURFACE WATER River Y 2b 2b N N
10319 - River Coupall SURFACE WATER River Y 2b 2b Y N
10320 - Allt a Bhiorain SURFACE WATER River Y 2b 2b Y N
if the user is searching for PAS the results look like this.
- UKS7992310 Lochs Long and Goil SHELLFISH WATER - Y 1a 9z N N
- UKS79923100 Ulva SHELLFISH WATER - Y 1a 9z N N
- UKS79923101 Ura Firth SHELLFISH WATER - Y 1a 9z N N
- UKS79923102 Voe of Clousta SHELLFISH WATER - Y 1a 9z N N
- UKS79923103 Wadbister Voe SHELLFISH WATER - Y 1a 9z N N
- UKS79923104 Inner West Loch Tarbert SHELLFISH WATER - Y 1a 9z N N
I had written a java script to select the current row, and page refreshes when I click
any where on the row and displays the display item saying that
currently selected id is 10317
or
Currently selected id is UKS79923100
and also assigns the 10317 to GLOBAL_WB_ID or UKS79923100 to GLOBAL_PA_ID
Now my user want to change the color of the currently selected row.
For this I am trying to change the report template like this
Column Template 1
<td class="t15data"#ALIGNMENT# style="background:#d1e2f3">#COLUMN_VALUE#</td>
Column Template 1 Condition
NVL(#2#,0) = NVL(:GLOBAL_WB_ID,0);
BUT
it is giving the following error.
Encountered the symbol "<" when expecting one of the following: ( ) - + case mod new not null others table avg count current ........................
ERR-1025 Error processing PLSQL expression. :GLOBAL_WB_ID = NVL(10317,0);
Then I changed the condition to substitute the #2# in single quotes like this.
NVL('#2#',0) = NVL(:GLOBAL_WB_ID,0);
BUT it is giving this error
Encountered the symbol "10317" when expecting one of the following: ( ) - + case mod new not null others table avg count current ........................
ERR-1025 Error processing PLSQL expression. :GLOBAL_WB_ID = NVL('10317',0);
I am unable to understand where the error is coming from.
Please help me.
10317 is the first row of the result set.
Thanks a million in advance.

How to modify the standard table

plzzzzz answer my qestion.
how to modify the standard table?
in my knowedge we have the accese key is it correct or worng

Hi
The system asks for access key only of two reasons:
1) You may be having problem of access rights. You would have to contact basis peopl.
2) You may try to name an object not complying with the rules. You may have to check with the same.
the process of getting access key is
the steps to get access key
you can also try via transaction OSS1
In your Inbox, click on 'Registration', then on 'Register Objects', then you will have to choose your installation and give details about your object.
The details you can get by going to your object and clicking on 'Change' - the pop-up screen which asks you for the access key gives you all the details you need to fill in on OSS1 to get your key.
or
U can get Access key from www.service.sap.com
After getting into the site,select quicklinks, then click s to goto SSCR, in
that select registration,
after giving the proper details, u can get the access key
or
on sap support portal (sapnet)
--> key & request
---> register SSCR key
---> registration
---> register developper
and then choose your rigth installation number
you can get the access key in this way
reward if usefull

How should i modify the hp54600a instrument driver for GPIB so i can use it for RS232 interface ?

I try to modify the hp54600a instrument driver for GPIB, so i can use it with RS232. But somehow it didnt work. When i try to run the initilize it, the prgoram show VISA read error (time is up before the process is finish). How should I modify the VI so I can use it with RS232 interface ?

First, check the instrument's user manual to see if the GPIB and serial command sets are the same. Also check to see what EOS(End of String) characters the instrument requires. Then, do a loopback test to test communication in LabVIEW.
Search Results: Serial Loopback Test
Ray K
NI Applications EngineerMessage Edited by Molly K on 02-18-2005 10:57 PM

How to enhance the standard search with custom field?

Hi all,
I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search.
I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of the search and then code the custom logic. Some say, append the new field to the structure of the search object and then implement the BADI.
I'm actually a bit confused to understand the correct procedure.
Can someone please help me with a generic procedure to enhance the standard search with a custom field?
Thanks in advance.

Hi Maren,
Once I have got the same development. I have followed the below steps, please check with this. Let me know for further inputs.
Add new field using Append structure of type ‘XXX’ in search
Create BADI implementation for Enhancement spot ‘ES_CRM_RF_Q1O_SEARCH’ and include filter ‘BTQOPP’
Put your logic in BADI implementation – SEARCH method
Add it in WebUI configuration
Remove the operator if required
Regards,
Swadini Sujanaranjan

Adding logo to the standard PO Output for communication program

Hello All.
I need to add company logo to the Standard PO Output for Communication program. Can someone please tell me a way to do this. I went into applications and see its a Java Concurrent program. I even went into these forums and I saw there is a way to uncomment out the line in the XSL file and add the logo there , but how do I upload back to the template. The Upload Button is disabled for this template.
Can we use the Standard Purchase Order Stylesheet for this?
If so how to make changes and how can I upload it back?
Should I do an RTF temnplate?
Can someone pl help me here. We are on R12 and I am not much familiar with exposting RTF to XSF FO.
Thanks
Vidhya

We took the standard PO document XSL-FO template and enhanced for our own needs. The first of those is to utilize the company's logo. Search for 'external-graphic' in the xsl-fo template. The first hit will be the section for the logo. The comments in the template provide some guidance on what to change. For our company, I changed the URL to point to a .gif file on the Apps server ($OA_MEDIA/company_logo.gif) .
The one downside that I have found so far, is that I am have to hard-code the entire document path. This path will change between instances. So I once our production instance is defined, I will set it to that path.
- Scott

Modify the standard records in database table

hi folks,
could u say me , how to modify the standard records(values) in database table.
For example in VBAP is one field like ZWERT(target value) , I wnat to modify the values of this field .
THANKS
KUMAR

Hi,
It's not advisable to modify the standard tables through program. If you want you can do using MODIFY.
MODIFY database_table FROM TABLE itab.
Thanks,
Sri.

Modify the standard screen of a report

I've just created a report with some parameters and when i try to modify the standard screen of this report via se80 i've got a warning message that tells me that all changes in standard selection dynpro will be discarded.
Does that mean i can't modify this Dynpro?
Thanks

Hi jose,
Wat is ur problem can u explain me clearly. wat u r trying to modify?? Ru trying to change screen settings??
For dynpro check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
Regards,
Pavan<a href="http://http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm">http://http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm</a>

Why is there no standard search help for table-field T056U-VZSKZ?

Hi Experts,
A blessed day.
Table-Field T056U-VZSKZ (Control table for calculation of interest on arrears-Interest calculation indicator or account number) is being used to provide the entries for a screen-field of a standard transaction for Account Determination: Posting Specifications. However, this table-field T056U-VZSKZ does not have a standard search-help. I've looked for an OSS for this, but wasn't able to find one. Is there a reason why this T056U-VZSKZ does not have the standard search help when VZSKZ is it's key field?
Thanks.
Regards,
ianne

Hi Marco,
When you attach the search help make sure you also attach the export parameter of the search help to the name column. That is in the tab 'Further characteristics' we have to pass two value. The search help name should be typed in place of 'Parameters' and the export parameter of the search help should be typed in the place of 'Name'.
Please try this and post back the updations.
Thanking you,
Jerry

Standard SAP process for third party repair or subcontracting repair

Hi All,
Please let me know if there is any standard SAP process for third party repair or subcontracting repair.
Given below is the process in brief.
1. Receive the repairable product in the warehouse from customer
2. Do the inspection in warehouse
3. Send the repairable product to the subcontractor to do the repair
4. Receive the repaired product from the subcontractor
5. Send the repaired part to the customer.
6. Bill the customer
Please share your inputs if you have any.
Thanks in Advance.
Regards,
Madhu.

Hi there is no SAP standard process for this. I can give you work around for that.
1.. Receive the repairable product in the warehouse from customer - Normal customer returns or customise a movement type to receive it with our without value as per requirement
2. Do the inspection in warehouse - Normal inspection
3. Create a service PO with the vendor.
4. Send the repairable product to the subcontractor to do the repair - Send using 541 movement type to vendor or use the copy of 541 movement type to send to vendor.(you can refer PO also system does not validate)
5. Receive the repaired product from the subcontractor - Reversal of 541
6. Send the repaired part to the customer.
7. Bill the customer
Regards
Antony

Who modified the standard report

Hi,
How can i find out who modified the standard report in my server,guide me for the same.
Thanku

SE38 -> Enter report -> Mark Attributes -> Display -> Last changed by.
Regards
Juan

HT1918 i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fi

i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Is the standard delivery cost for calendar in UK really £7.19?

Is the standard delivery cost for calendar in UK really £7.19? I want two different calendars, already designed, and think £14.38 is a ridiculous amount to pay for postage......help please!

The shipping prices for the UK are listed here: The prices are really that high:
http://store.apple.com/uk/help/print_products

What is the standard inbound idoc for substation management?

Hello Experts,
Can anybody help me to find out the standard inbound idoc for substation management?
The following field are requied to be filled in idoc.
1)Power_Produced(STAGR)
2) Reduction_Power_Consumed(STAGR)
3)Ancillary_Power_Consumed (STAGR)
4)Unit (MEINB)
5) UOM and Date (BUDAT)
If possible please tell me the standard BAPI for these fileds.
Thanks in advance for your help.
Thanks and Regards,
Suresh.

Hi Debo,
What is your exact requirement?
Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
sample:
Regards,
Rama

Modifying the Standard search process for variables in BI reports

Similar Messages

Maybe you are looking for