Module for calling source- cannonical mapping?

Hi,
We have 2 mapping(xslt) in IR
source->cannonical and cannonical->target
we want to remove source->cannonical mapping and want to put that in MODULE of communication channel.
My problem is how to call xslt mapping using java code and we done value mapping their. Did that vallumapping will work in module..
waiting for responce..its an urgent task..
thanq
krishna

Similar Messages

Where can i download the weblogic modules for apache (source/precompiled)

I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it.
Complications are Solaris 10 and apache 2.0.55. So the latest versions of OS and webserver. Is there a precompiled module available or can i get the sources somewhere?
I do have a working module for apache 2.0.53 if someone can confirm that this is supported for 55 that would be fine by me.

At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus

Any function module for calling a text editor in subscreen?

Hi,
I would like to know if there is any function module that can be used to call a text/note editor and can be displayed in a subscreen of a main screen (dialog programming)? This text/note editor should not be able to edit, but for display only.
Please help. Thanks...

>
Pablo Casamayor wrote:
> Hi,
>
> maybe this can help:
>
> check program SAPTEXTEDIT_TEST_1
> in this program pay attention to:
>
>
> MODULE pai INPUT.
>
>   CASE ok_code.
> ....
>     WHEN 'FIND'.
>       PERFORM find_text.
> ....
>     WHEN 'HIGHLIGHT'.
>       highlight = 1.
>       PERFORM highlight_lines USING highlight.
>
>
>
> *&---------------------------------------------------------------------*
> *&      Form FIND_TEXT
> *&---------------------------------------------------------------------*
> FORM find_text.
>   found = 0.
>   IF case_sensitive = 'X'.             " button on Dynpro
>     case_sensitive_mode = editor->true.
>   ELSE.
>     case_sensitive_mode = editor->false.
>   ENDIF.
>   IF whole_word = 'X'.                 " button on Dynpro
>     whole_word_mode = editor->true.
>   ELSE.
>     whole_word_mode = editor->false.
>   ENDIF.
>
>   CALL METHOD editor->find_and_select_text
>                EXPORTING search_string = search_string
>                          case_sensitive_mode = case_sensitive_mode
>                          whole_word_mode = whole_word_mode
>                CHANGING string_found = found.
> * Flush for proper work of the following if statement
>   CALL METHOD cl_gui_cfw=>flush.
>   IF NOT search_string IS INITIAL.
>     IF found NE 0.
>       MESSAGE s000 WITH text-013.
>     ELSE.
>       MESSAGE s000 WITH text-014.
>     ENDIF.
>   ENDIF.
> ENDFORM.                               " FIND_TEXT
>
> *&---------------------------------------------------------------------*
> *&      Form HIGHLIGHT_LINES
> *&---------------------------------------------------------------------*
> *      -->P_HIGHLIGHT text                                            *
> *----------------------------------------------------------------------*
> FORM highlight_lines USING    p_highlight.
>   IF selection EQ 'X'.
>     CALL METHOD editor->highlight_selection
>          EXPORTING highlight_mode = p_highlight
>          EXCEPTIONS has_no_effect = 1.
>     IF sy-subrc NE 0.
> *      add your handling
>     ENDIF.
>   ELSE.
>     CALL METHOD editor->highlight_lines
>          EXPORTING
>                  from_line = from_line
>                  to_line = to_line
>                  highlight_mode = p_highlight
>          EXCEPTIONS has_no_effect = 1.
>     IF sy-subrc NE 0.
> *      add your handling
>     ENDIF.
>   ENDIF.
>
> ENDFORM.                               " HIGHLIGHT_LINES
>
> and this link:
> http://help.sap.com/saphelp_45b/helpdata/EN/0e/514035634d761fe10000009b38f889/frameset.htm
>
> Best regards.
>
> Edited by: Pablo Casamayor on Apr 17, 2009 9:19 AM
Hi Pablo,
I have look through the program SAPTEXTEDIT_TEST_1. This program does the Text Selection and Highlighting the Text only after the buttons of each of the function is clicked.
My requirements will be, having all the selected text (with a string pattern) to be highlighted when this text editor is displayed. Is this possible?
Really thanks for your replies...
Regards,
Chuak Fen

Java code for calling xslt mapping in module?

Hi,
We have 2 mapping(xslt) in IR
source->cannonical and cannonical->target
we want to remove source->cannonical mapping and want to put that in MODULE of communication channel.
My problem is how to call xslt mapping using java code and we done value mapping their. Did that vallumapping will work in module..
waiting for responce..its an urgent task..
thanq
krishna

You can use the MessageTransformBean to run the XSLT in the adapter framework:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken]
I do not know, if the value mapping works here. Maybe you just give a try.
Regards
Stefan

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

What is the exact syntax for calling remote function module.

Hi to all
1.....what is the exact syntax for calling remote function module.?
Thanks and regards,
k.swaminath reddy

hi
good
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
p_num1 = 10
p_num2 = 15
importing
p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
reward point if helpful.
thanks
mrutyun^

Mapping Help for replacing source value

Mapping Help for replacing source value
Posted: Mar 14, 2006 1:06 AM Reply
Hi all,
I am unable to do transform the source value to required target value,
From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
The source structure is like this,
- <Event ID="239" TRANS_TYPE="ADR">
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
</Event>
REGARDS,
sridhar

Hi,
This can be done using user-defined function as well.
Code the function as...
if(Addr_Type.equals("HOME"))
 return "03";
else if(Addr_Type.equals("MAIL"))
 return "05";
else
 return "Invalid Address Type";
Here, Addr_Type is Input String Argument for this function.
Map this function between ADDRESS_TYPE and ANSSA.
Regards,
Uma

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

Suggest me way for calling Function Module in BSP page

Dear Friends,
I want to create sales order using BSP. For that there is an bapi called BAPI_SALES_CREATEFROMDAT2. I have two ways to do that.
1. I will create all the required structure on the BW system and then i can call the bapi.
2. I will create another function module which calls the BAPI_SALES_CREATEFROMDAT2. and i will pass all the require parameters to my created Function module.
In the first case i suppose to create structure for header data, order items and partner data. It is quite lenghty work.
In the second case i need not to create any kind of structure or types-pool.
If answer is case1 then should i create exact structure or i can create that many fields contained structure which i require?
Suggest me that whether should i follow first case or i should follow second case and also which one is more powerful?

Thanks for giving me answer.
I have tried to find through BAPI Browser for BAPI_SALESORDER_CREATEFROMDAT2 but unfortunately it is not creating the structure. This is very suprising for me because as per your weblog and as per your answer it should be generated. Now i have two choices :
1. I create same structure on 6.20 system manually for that i have to create around 100 data elements or may be more than that which are not exits on 6.20 system.
2. I will create another function module on 4.6c system which calls BAPI_SALESORDER_CREATEFROMDAT2 and i need to pass only selected parameters.
2nd option is suitable for me but i have doubt that is the proper way for working production?

Table for Data source and Transfer rule mapping

Hi all,
Do we have any table where in we can know the different transfer rules(for different source systems) assigned to the same Data source.
thanks and regards,
Rk.

thank you all,
the table RSDS does not have 3.x data sources, it has only 7.0 Data sources also it does not have the field mapping.
RSOSFIELDMAP and RSTSRULES have the field mapping of the datasources, do we have any similiar tables for 7.0 Datasources.
regards,
RK

Source system mapping for transport

We just create a change request for an InfoSouce. Now we transport this change request from DEV system to TEST system. But when this change request was imported on TEST system, got the "Method Execution" red error which can be checked through STMS in log. The red error msg is "Source system A does not exist", where A is our R3 DEV server. Actually we need the source system B which is R3 TEST server in the InfoSouce transported into BW TEST system, but the problem is that the change request was created on BW DEV which uses A as Souce System in the InfoSouce, then how to make the InfoSouce has B on BW TEST after the transport?
Roberto gave an answer (see my another post: What should BASIS do for an InfoSource transport for Souce System change?) as below:
"you have to set the source system mapping in your target system in RSA1, Transport Connection -> F8 and then import your request again !"
But he said this setting would be done at the target or TEST system. I don't think it's right, this mapping setting should be done at the DEV system since our transports are created in DEV Transport Connection, am I right?
Please verify who is right?

hi Kevin,
let's refer to sap's doc
'bw and transport'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
p. 33
'.. make sure to set the source system mapping configuration in each target system to convert the transfer rules ..'

EJB module for a 3rd party adapter not getting called

Hello All,
I have written and adapter module EJB code and calling it from Sender 3rd party Ariba cXML adapter.
This EJB is successfully build and deployed on the server but after I added it in channel in ID....the cXML channel stopped picking up the messages. When I removed the config from the channel, it started working again.
I think its a known bug in Ariba adapter that the audit logs can not be seen in RWB so it has made it more dificult for me to trouble shoot.
How can i check if the adapter was called at all and what went wrong ?
Is there a different way of adding custom modules in 3rd part adapters ?
Please help.

Hi Ranjeeth,
Even I had same issue...after lot of debugginh realise path specified in CC for calling adapter module was incorrect...please check if you are pointing to correct location where you have deployed your module...
Check this doc here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
According to it, if you properly configure the ejb-j2ee-engine.xml file, then you'd call your module using "localejbs/<JNDIName>".
Hope this will help.
Nilesh

Source SPM template for CURR_DS (Z_SADSECC6TCURR) to map

anyone have idea what is source SPM template for CURR_DS (Z_SADSECC6TCURR) to map, I have extracted the data to BI and maintained necessary tables in BI as well, but i am unable to find standard template to map the CURR data source .. Neither create new template.
For others its direct templates are available not CURR? Can someone give me tips to build CURR template?
Regards,
Mahesh

Hi Mahesh,
SPM uses the standard currency tables for any currency conversion in the application. If you already have currency populated in the standard BW tables you don't have to load the same data again using the SPM data load mechanism.
Having said this if you want to load data using flat files, you need 2 files one for the currency conversion rate and second file for currency conversion factor.
Regards,
Rohit

My iphone4 recently stopped working in my car and no longer asks for audio sources. It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

My iPhone recently stopped asking for audio source in car and no longer works through the speakers. It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate. What happened?

The same problem I have today afternoon.
My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
I plugged iPod to my mac computer - itunes says it's all Ok.
I am confused and do not understand what is happening.
May be restoring to default factory settings iPod....

Call Function not Generating Function Module for Smartform

Hi Gurus,
We have a work copy print program use to print deliveries (smartforms). This program works fine in Production but right now we are doing some testing and I found out that when we run this program in QUALITY environtment, it shortdumps with error saying "Function Module Not Found"
Basically when it gets to the Function Module "SSF_FUNCTION_MODULE_NAME", it could not generate any function module for the form it Sy-Subrc = 2 Exception meaning NO_FUNCTION_MODULE.
The problem is this only happens in our QUALITY environment.I compare the function module in the 2 systems, there was not diff as this is a Standard SAP module. I passed diff smartforms we have in QUALITY through the FM and it will not generating any FM for any of them. So this is not an error from the smartforms, bcos all the same smartforms generates FM in Prod.
So what I did next is to Debug the FM "SSF_FUNCTION_MODULE_NAME" in the 2 systems to see where the diff is coming from. I noticed 2 views that the FM is using, they are STXFADM and D010SINF . So on the Production system, STXFADM-LASTDATE and D010SINF-UDAT fields are the same value, so it generates the FM. On the QUALITY systems, the values are different hence it skips the code to generate the FM.
Thanks Guys.
Points will greatly be awarded for this.

Please guys, help me look into this, I really need a solution fast.
Thanks

Module for calling source- cannonical mapping?

Similar Messages

Maybe you are looking for