Module Pool - Error message on a Modal Dialog screen with input

Hello All,
I have a modal dialog screen which is called on F4 help of a input field. This dialog screen has radio buttons on it to select. On selection, we check if the user is authorized to that option. If not, raise and error message with command MESSAGE msgid.....
When the error message pops-up and when clicked ok on it, the radio buttons on the modal dialog screen gets disabled. I want to have the modal dialog box to be able to accept the new radio button as input.
Can anyone please suggest.
Thanks,
Smita

Put all of your Radio buttons in the CHAIN ... ENDCHAIN with one module.
CHAIN.
    FIELD rb1.
    FIELD rb2.
    FIELD rb3.
    MODULE check_chain ON CHAIN-REQUEST.   "<< implement logic in check_Chain
ENDCHAIN.
If you want, you can even disable the options before displaying the screen. Do all necessary checks in the PBO and based on that disable the options.
Regards,
Naimesh Patel

Similar Messages

Module Pool - Error Message

hi all,
plz help:
requirement:
thr r 2 screen fields CODE(Input Enable) and DESC(Output Only).
when user enters CODE corresponding DESC will come automatically but if no value is entered in CODE, DESC will also be blank with an error msg below: 'Enter Code'.
i have PAI Module like this:
FIELD code MODULE validate_code.
Module Validate_code.
if CODE is initial.
      clear DESC.
      Message e000(zz) with 'Enter Code'.
else.
      select DESC for CODE entered.
endif.
endmodule.
for this code, though DESC becomes initial when CODE is deleted from screen but in the screen it is still showing the previous DESC value. i need to this older value of DESC.
ME21N->Org.Data TAB
Enter Pur.Org. and press ENTER Once and then delete the same and press ENTER again.
I need this functionality.
Plz Help.
Edited by: AVIJIT SIKDAR on Jun 4, 2008 2:59 PM

Nothing else.
By putting an FuncCode on the field, when the user changes it, the process will immediately go to the PAI routine, process the code
you have there, and then process the PBO routine to redisplay.
If your code recognizes an error, the error will be displayed and the user will need to correct the issue before proceeding.

Module Pool Error handling

Hi friends,
This issue regarding Module Pool Error Handling
How to handle the multiple error on the same screen ,
For example in the below code you could see "Carrid is Invalid" when carrid is entred wrongly
"in the same way i also need " Connid is invalid" When the customer entres the wrong Connid
*Select single * from sflight into e_sflight*
where carrid = e_sflight-carrid AND
connid = e_sflight-connid AND
fldate = e_sflight-fldate.
IF NOT sy-subrc IS INITIAL.
MESSAGE ID 'ZADT' TYPE 'E'
NUMBER '002' WITH 'Carrid is invalid'.
Kindly let me know your feedback\
Thank you
Sandy

Hi Sandy,
in PAI. " Also try to close your Questions as currently 8 out of 8 are unresolved
Chain. " For More info take F1 help on this Key word
field : carrid, connid. " These are the Screen Field names
module validate on chain-request.
endchain.
in Program.
module validate.
select single carrid into carrid
     from scarr
      where carrid = carrid.
if sy-subrc = 0.
select single connid into connid
          from sflight
          where connid = connid,
if sy-subrc NE 0.
message 'Enter Valid Connid' type 'E'.
endif.
else.
message 'Enter Valid Carrid' type 'E'.
endif.
endmodule.
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Apr 12, 2010 11:48 AM

Select-option in Module Pool-Error-Include block not specified .........

Hi,
I am trying to define a select-option at Module Pool level.
In the program
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECT-OPTIONS: V_BWTAR FOR MSEG-BWTAR.
SELECTION-SCREEN END OF SCREEN 1010.
In the Screen flow logic it is as follows
PROCESS BEFORE OUTPUT.
MODULE STATUS_0600.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE USER_COMMAND_0600.
At SE51 it is showing an error
"Include block not specified,not defined or spelt incorrectly.".
Please let me know how to correct this.
Thanks,
K.Kiran.

HI Emre
I am having the same issue. there is not possible to create a subscreen by se51 since I already define the subscreen by selection-screen begin of screen *** as subscreen.
regards TP

BDC for Modal dialog screen

Hello,
I'm creating a bdc for create customer transaction (FD01). The problem I'm currently having is on maintaining the "other communication" details for the customer. The requirement I have is to maintain only the communication type "URI". But I can't find the correct program and screen number for this modal dialog. anyone have an idea?
Thanks?
MP

Hi, thanks for all the reply. However, everything has been tried. The modal screen dialog I was refering at does not contain any program or screen details when I use F1. This screen does not appear in SHDB when doing the recording. SAPLSLVC_FULLSCREEN/0700 is not the screen I'm refering at.
When you click on the "Other Communication", there will appear the screen I'm refering at having the list of all other communication type you need to maintain (Fax, Telephone, E-mail, URI). This screen is somehow similar the way serach help functions. I'm basically concern on URI. So what I need to do is place the cursor on URI and click on the check button or double cliking URI is ok. This is the part missing on my bdc, choosing the URI in the modal dialog screen. Upon debugging, it seems that a Function is responsible in displaying the screen.Any idea?
Message was edited by: Marlon Pita

My itunes account keeps giving me this Error message. "You are signed in with a different Apple ID than previously used with podcasts. I only have one Apple ID. What do I do?

My itunes account keeps giving me this Error message. "You are signed in with a different Apple ID than previously used with podcasts. Do you want to sync these podcasts subscriptions and stations with "gajppl"" gajppl is my only Apple ID. What do I do?

Please sign out of the iTunes Store by selecting
Store ▹ Sign Out
from the iTunes menu bar. Then sign back in.

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

what's your home version (click help>about) and was that just a warning so you were able to open the file?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I downloaded Lion and have attempted to 'updat' it from apps to my imac... after 3 hours of uploading it show mw an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

What type of Internet connection do you have? How fast is it?

ALV Toolbar on modal dialog screen and toolbar on text edit control

Hello,
I have created one container and producing ALV Grid output on a modal dialog screen. i do not want the ALV Toolbar to appear on this screen. How can I hide it ?
ALso I need to hide some buttons on a Text edit control. How can I hide them ?
Thanks and rgds,
Anand

Hi,
To exclude some Toolbar functions, please do the below
DATA:
lt_toolbar_excl TYPE ui_functions.
Exclude Some toolbar functions
    APPEND cl_gui_alv_grid=>mc_fc_detail         TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_info           TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_graph          TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_view_crystal   TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_delete_row TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_copy_row   TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_loc_undo       TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_check          TO lt_toolbar_excl.
    APPEND cl_gui_alv_grid=>mc_fc_refresh        TO lt_toolbar_excl.
And Pass the lt_toolbar_excl to the ALV object
Display
CALL METHOD go_alv_grid->set_table_for_first_display
    EXPORTING
      is_variant           = ls_variant
      is_layout            = ls_alv_lay
      is_print             = ls_print
      i_save               = 'A'
      it_toolbar_excluding = lt_toolbar_excl
    CHANGING
      it_sort              = lt_sort
      it_outtab            = gt_user[]
      it_fieldcatalog      = lt_alv_cat.
Hope this helps you.
Thanks,
Ruthra

HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
Thanks

Hi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran

Module Pool - Error message on a Modal Dialog screen with input

Similar Messages

Maybe you are looking for