Module Pool with select options
Hi,
I have created select-option and radio button in Module pool. My req is that I when the user enters any value and click on the radio button the respective programs should be executed.
Thanks
Hari
Hi Hariharan,
I would recommend you to use primarily use push button and then after SUBMIT statement, and also the example for the same is provided below:
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
seltab_wa-low = pnppernr-low.
append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
with p_param2 = 'value'.
Please validate the same at your end as well, please come back, if inputs are required.
BR/Thanks
Pranav Agrawal
Similar Messages
-
Module Pool with Selection Screen
I have a module pool in which I've created a sub screen to accommodate select-options.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
select-options: r_matnr for mara-matnr.
selection-screen end of screen 1010.
I've put this selection screen in an include of the module pool.
Now I can't seem to see my variable, r_matnr, in the program. How to I pass the value to the program and what have I done wrong. Perhaps where I placed the selection-screen.
Any help would be appreciated.
PS... I can see my screen but when I put the debug on, no value is in r_matnr.
Thanks MarianneHi Mariane,
Placing the selection screen declarations in an include does not make any issues. Can you please check your code. For your reference, I am placing a simple piece of code, in which I am also calling a selection screen from within a module pool and displaying the output of the select options. Execute this code and check what is the difference between your code and this.
REPORT zabi_test04.
INCLUDE zabi_test04_i001.
INCLUDE zabi_test04_i002.
START-OF-SELECTION.
CALL SCREEN 9000.
*& Module STATUS_9000 OUTPUT
* text
MODULE status_9000 OUTPUT.
SET PF-STATUS 'STAT9000'.
SET TITLEBAR 'TL1'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
* text
MODULE user_command_9000 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
LEAVE PROGRAM.
WHEN '&SELECT'.
lv_dynnr = '1001'.
CALL SCREEN 9001.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9001 OUTPUT
* text
MODULE status_9001 OUTPUT.
SET PF-STATUS 'STAT9001'.
SET TITLEBAR 'TL2'.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9001 INPUT
* text
MODULE user_command_9001 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
LEAVE TO SCREEN 0.
WHEN '&EXECUTE'.
WRITE s_matnr-low.
LEAVE TO LIST-PROCESSING.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Include ZABI_TEST04_I001
TABLES : mara.
DATA : ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm,
lv_dynnr TYPE sy-dynnr VALUE '1001'.
*& Include ZABI_TEST04_I002
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
*PARAMETERS p_werks TYPE t001w-werks.
SELECT-OPTIONS s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 1001.
Regards,
Abijith -
How to declare and work with select-option in screen painter?
hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neonHi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin -
Sort up and sort Down push buttons in module pool with table control wizard
hi,
i have created 2 buttons for Sort up and sort Down push buttons in module pool with table control wizard
please any one can help me.
regardsHi
Following code is to enable and disable the tbl control using two buttons. Just alter the code and for each button write the sort code.
REPORT YJAN27_SCREEN .
TABLES: SFLIGHT, YFLIGHT_28.
TYPES: BEGIN OF struct1,
carrid like sflight-carrid,
connid like sflight-connid,
fldate like sflight-fldate,
END OF struct1.
CONTROLS TBL1 TYPE TABLEVIEW USING SCREEN 2700.
DATA: OK_CODE LIKE SY-UCOMM,
CARRID LIKE SFLIGHT-CARRID, "cols in tbl ctrl
CONNID LIKE SFLIGHT-CONNID,
FLDATE LIKE SFLIGHT-FLDATE,
itab TYPE TABLE OF STRUCT1 WITH HEADER LINE,
cols like line of TBL1-COLS,
FLAG TYPE I.
FLAG = 1.
CALL SCREEN 2700.
*& Module STATUS_2700 OUTPUT
* text
MODULE STATUS_2700 OUTPUT.
SET PF-STATUS 'BACK'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_2700 OUTPUT
*& Module USER_COMMAND_2700 INPUT
* text
MODULE USER_COMMAND_2700 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'DIS'. "write code for sort up
loop AT TBL1-COLS INTO COLS.
COLS-SCREEN-INPUT = 0.
MODIFY TBL1-COLS FROM COLS.
ENDLOOP.
FLAG = 2.
WHEN 'ENA'. "write code for sort down
loop AT TBL1-COLS INTO COLS.
COLS-SCREEN-INPUT = 1.
MODIFY TBL1-COLS FROM COLS.
ENDLOOP.
FLAG = 1.
ENDCASE.
ENDMODULE. " USER_COMMAND_2700 INPUT
*& Module GET_DATA OUTPUT
* text
MODULE GET_DATA OUTPUT.
select carrid connid fldate from SFLIGHT into table itab.
ENDMODULE. " GET_DATA OUTPUT
*& Module POPULATE_TBL OUTPUT
* text
MODULE POPULATE_TBL OUTPUT.
MOVE-CORRESPONDING ITAB TO SFLIGHT.
ENDMODULE. " POPULATE_TBL OUTPUT
*& Module CHANGE_SCREEN OUTPUT
* text
MODULE CHANGE_SCREEN OUTPUT. " use this module if you want to hide the other button
CASE FLAG.
WHEN 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'B_ENA'.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
LOOP AT SCREEN.
IF SCREEN-NAME = 'B_DIS'.
SCREEN-INVISIBLE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
WHEN 2.
LOOP AT SCREEN.
IF SCREEN-NAME = 'B_DIS'.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
LOOP AT SCREEN.
IF SCREEN-NAME = 'B_ENA'.
SCREEN-INVISIBLE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDCASE.
ENDMODULE. " CHANGE_SCREEN OUTPUT
PROCESS BEFORE OUTPUT.
MODULE STATUS_2700.
MODULE CHANGE_SCREEN. " use this if you want to display one button at a time
MODULE GET_DATA.
loop at itab WITH control TBL1.
MODULE POPULATE_TBL. " populate tbl ctrl
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2700. " do the sort operations
loop at itab.
endloop.
Hope this helps
Regards,
Jayanthi.K -
Issue with Select options in select statement - ABAP Question
Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
HanuHi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
AND lifnr IN s_lifnr
AND gjahr IN s_gjahr
AND budat IN s_budat
AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay -
HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.
HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.
how can we add range selection in screen painter.
regards.Hi,
create two input fields and a push button like select option in the screeen.
Try checking this logic
<b>Program:</b>
<b>ranges</b> ra_matnr for mara-matnr.
<b>Layout field name declaration:</b>
Give the low field name as ra_range-low
and high field name as ra_range-high.
extension for pushbutton.--exten(function code)
next -- function code for the enter key.
PBO
module status_3000.
PAI
module user_command_3000.
<b>module user_command_3000.</b>
if sy-ucomm = exten.
call screen 400. (screen which shows extension values can be kept).
elseif sy-ucomm = Next.
if ra_matnr-low is not initial.
ra_matnr-SIGN = 'I'.
ra_matnr-OPTION = 'EQ'.
APPEND ra_matnr.
clear ra_matnr.
endif.
if ra_matnr-high is not initial.
ra_matnr-SIGN = 'I'.
ra_matnr-OPTION = 'EQ'.
APPEND ra_matnr.
clear ra_matnr.
endif.
endif.
endmodule.
module status_3000.
read table ra_matnr index 1 into ra_matnr .
set pf-status '3000'.
set title '3000'.
endmodule
Br,
Laxmi. -
Mulitple selection with select option on subscreen
Hi colleagues,
I've the following issue:
I'm programming a dynpro this dynpro contains two subscreens. The lower subscreen will contain another dynpro defined as subscreen with an ALV to display results.
The top subscreen (0150) area will be filled with a generated subscreen with the command
SELECTION-SCREEN BEGIN OF SCREEN 0150 AS SUBSCREEN.
with select options I define my selection area like:
SELECT-OPTIONS: sa_6 FOR gs_rp_attrib_sel-sonr.
If I call my transaction starting up the dynpro containing the two subscreens the result looks quit how I expect it. BUT then I try to start up the multiply selection Pop-UP for the selection field by pressing the button just right behind the HIGH input field, nothing happens. The multiply selection pop-up basicly does not show up.
Any clues what I need to add that it will show up?
Does the mulitply selection not work with
SELECTION-SCREEN BEGIN OF SCREEN 0150 <b>AS SUBSCREEN</b>???
(If I do a simple test program with a selection screen not being a subscreen, the multiply select popup comes up.)Hi,
A subscreen cannot call another screen.
I guess this is the reason why u are facing this problem.
Thanks,
Rashmi. -
Innput field with Select option on custom screen
Hi,
I need to create an Input field with Select Option(No interval) button on Custom dialog screen .
Is there any idea how can I create it on screen ?
Thanks
Sachincreate a normal inputfield and place an icon next to it. then in the pai on click of that button use the following code.
data: wf_tab_field like rstabfield occurs 0 with header line ,
wf_exl_opt like rsoptions .
refresh: wf_tab_field .
move: 'KOSTL' to wf_tab_field-fieldname ,
'CSKS' to wf_tab_field-tablename .
append wf_tab_field .
clear wf_tab_field .
move: 'X' to wf_exl_opt-bt ,
'X' to wf_exl_opt-cp ,
'X' to wf_exl_opt-ge ,
'X' to wf_exl_opt-gt ,
'X' to wf_exl_opt-le ,
'X' to wf_exl_opt-lt ,
'X' to wf_exl_opt-nb ,
'X' to wf_exl_opt-np .
call function 'COMPLEX_SELECTIONS_DIALOG'
exporting
title = 'Select Cost Centers'
text = 'Cost Center'
* SIGNED = 'X'
* LOWER_CASE = ' '
* NO_INTERVAL_CHECK = ' '
* JUST_DISPLAY = ' '
* JUST_INCL = ' '
excluded_options = wf_exl_opt
* DESCRIPTION =
help_field = 'CSKS-KOSTL'
* SEARCH_HELP = 'KOST'
tab_and_field = wf_tab_field
tables
range = r_kostl
exceptions
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if not r_kostl[] is initial .
read table r_kostl index 1 .
if sy-subrc eq 0 .
move: r_kostl-low to wf_t_kostl .
endif .
endif .
wf_t_kostl is the screen field name.
Raja -
Dear Experts,
I used component wdr_select_options to achieve select options functionality, But it displaying only one field as per my requirement user expecting both low & high fields.
Can you guide for 5 select options whether i have use t times the component at my component level.
And also could please guide me how to use select options at code level.
Thanks & Regards,
Siva Mandapudi.
Edited by: SIVAMANDAPUDI on Jul 18, 2011 6:39 PMHi Saravan,
Please find below details.
The exception is:
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "ONACTIONSEARCH_SUPPLIER" "(METHOD)", nor was it propagated by a
RAISING clause.
code:
DATA FOR WORKING WITH SELECT OPTIONS
data: rt_SUPPLIERNO type ref to data.
data: rt_SUPPLIERNAME type ref to data.
field-symbols: <fs_SUPPLIERNO> type table,
<fs_SUPPLIERNAME> type table.
TYPES: BEGIN OF T_SUPPLIERNO,
SIGN(1),
OPTION(2),
LOW TYPE /SAPAPO/LOC,
HIGH TYPE /SAPAPO/LOC,
END OF T_SUPPLIERNO.
TYPES: BEGIN OF T_SUPPLIERNAME,
SIGN(1),
OPTION(2),
LOW TYPE /SAPAPO/LOC_DESCR40,
HIGH TYPE /SAPAPO/LOC_DESCR40,
END OF T_SUPPLIERNAME.
DATA: WA_SUPPLIERNO TYPE T_SUPPLIERNO, IT_SUPPLIERNO TYPE TABLE OF T_SUPPLIERNO,
WA_SUPPLIERNAME TYPE T_SUPPLIERNAME, IT_SUPPLIERNAME TYPE TABLE OF T_SUPPLIERNAME.
Retrieve the data from the select option
rt_SUPPLIERNO = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'ID_SNO' ).
dump raising when get_range_table_of_sel_field is called.
Thanks a lot.
Regards
Siva Mandapudi. -
Module pool with object oriented programming
can anyone send me links for module pool with object oriented programming.
hi,
some helful links.
Go through the below links,
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
<u>Sample std pgms.</u>
ABAP_OBJECTS_ENJOY_0 Template for Solutions of ABAP Object Enjoy Course
ABAP_OBJECTS_ENJOY_1 Model Solution 1: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_2 Model Solution 2: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_3 Model Solution 3: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_4 Model Solution 4: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_5 Model Solution 5: ABAP Objects Enjoy Course
DEMO_ABAP_OBJECTS Complete Demonstration for ABAP Objects
DEMO_ABAP_OBJECTS_CONTROLS GUI Controls on Screen
DEMO_ABAP_OBJECTS_EVENTS Demonstration of Events in ABAP Objects
DEMO_ABAP_OBJECTS_GENERAL ABAP Objects Demonstration
DEMO_ABAP_OBJECTS_INTERFACES Demonstration of Interfaces in ABAP Objects
DEMO_ABAP_OBJECTS_METHODS Demonstration of Methods in ABAP Objects
DEMO_ABAP_OBJECTS_SPLIT_SCREEN Splitter Control on Screen
Rgds
Reshma -
Multiple records with select option
i have to use select option in selection screen, which wl take the multiple values but that select option wont act as a range, the select option is a session name from sm35, the table from where data is retrieved is APQI, i have used a parameter before using select option ,like:
selection-screen begin of line.
parameters: P_grpid like apqi-groupid.
select-options: s_grpid like apqi-groupid.
selection-screen end of line.
AT-SELECTION SCREEN ON VALUE REQUEST FOR p-GRPID. " previous situation
{the code starts
FM F4 selection is called}
AT-SELECTION SCREEN ON VALUE REQUEST FOR S_GRPID-low. " CURRENT situation
FM F4 selection is called}
now when i give data in slection screen for s_grpid-low then it works as a parametr, but it doesnt take multiple values at s_grpid when i have alos mentioned the same for s_grpid-high.
Please tell me how to achive multiple records with select option, or u can also send a sample code if you have..
Thanks
SwarnaliHello Swarnali,
You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
so sudo code will be:
AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
Select data from table.
so_carr-LOW = value
append so_carr.
You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
Thanks,
Augustin. -
Working with select option in WD4A
can any one provide me some document or video file to work with select options in webdynro for abap?
Hi,
Find the following URLs
PDF - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/21706b4b-0901-0010-7d93-c93b6394bc1d
Video Clip - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/1a3c52e7-0b01-0010-ed81-f31d4868c5d6
Login to SDN to play the video clip.
Reward accordingly.
Regards
ChandraK -
Select-option in module pool with table Control
HI,
How to use the select-option in Module Pool and how Can i use the Table control in it.
Can any body give me some Clues.
with rgds
RanjithHi ..
PBO.
LOOP at <table contriol>
module --- Inside the module
DATA: g_uti TYPE REF TO cl_fobu_input_util.
if rollname <> space.
CREATE OBJECT g_uti
EXPORTING typename =rollname.
*....convert to external pattern
CALL METHOD g_util->output_convert
EXPORTING
field_value_int = p_value " This is Tablecontrol-low
IMPORTING
field_value_ext = p_value. " Retrun value for Low
ENDLOOP.
lly you have code in PAI
DATA: g_util_1 TYPE REF TO cl_fobu_input_util.
if rollname <> space.
CREATE OBJECT g_util_1
EXPORTING typename = rollname.
*....convert to internal pattern
CALL METHOD g_util_1->input_convert
EXPORTING
field_value_ext = p_value
IMPORTING
field_value_int_c = p_value.
The above code should be written for tablecontrol-high aswell..
you can also refer: Inlcude LSE16NF10 line no 341 & 434 (SE16n)
Nag -
Problem with select option in module pool
Hello friends,
I have successfully created a select option in my module using sub-screen. My problem is the EXTENSION buttom in the select option. When i click on the EXTENSION button a proper pop-up appears but when i input some values or cancel this pop-up then the program gives the following dump.
Error
The attribute screen type with the values 'Normal Screen' and
'Subscreen' determines the use of the screen. If a normal screen is used
as subscreen or vice versa, an error occurs.
The screen "ZRPMSEA" 0002 has, in this respect, an inappropriate screen type.
Kindly HelpHI,
Go to the Screen Attributes and select the appropriate Radio Button
1) Normal Screen " Whichever is required (in Which type of Screen you Want)
2) Subscreen " Check for the Correct type and Check the Radio Button Accordingly
3) Modal Scree
Cheerz
Ram -
Subscreen with Select-Options called from At Selection Screen event
Dear friends,
I'm trying to call a subscreen that contains a select-options, from an 'at selection screen' event, in a report program, but without sucess.
Here's go what I'm doing:
I declared a selection-screen as subscreen in my main program, and I'm calling it from a module-pool subscreen area, to make the module-pool select-options magic.
In my main report program, I have a customized status GUI with a new toolbar button and I'm handling it at the 'at selection screen' event.
What I need to do is to call the subscreen that contains the select-options when this new customized button get pressed, but when It happens, the select-option selections pop-up doesn't appear.
If I call the subscreen from the 'start-of-selection' event, it goes fine, just don't work from the 'at selection screen'.
Any ideas on how can I do it?
Thank you,
Heberi think you should try something like this:
at selection screen.
if condition handled ....
show_popup = 'X'.
endif.
at selection screen output.
if show_popup EQ 'X.
call subscreen
endif.
Maybe you are looking for
-
Apple TV (1st gen) photos in an Event not in date order
I have synced selected Events from iPhoto to my Apple TV 1st gen with iTunes 11.0.1 The events synced are "merged" events from 2 cameras on a month-by-month basis. In iPhoto, I have the event sorted by date, but on the Apple TV, the photos are NOT in
-
OutOfMemory error on large file processing in sender file adapter
Hi Experts, I got file to IDOC scenario, sender side we are using remote adapter engine, files are processing fine when the size is below 5mb, if the file size is more than 5mb we are getting java.lang.OutOfMemoryError: java heap space. can anyone su
-
I have a 2009 MacBook Pro running OS X 10.5.8. How do I upgrade to 10.6 or later??
-
How to use partition by instead of group by?
Hi, I am having trouble using partition by clause in following case, column other_number with null values contains 10 records in 'some_table' 5 records with date 11-01-2009, item_code = 1 5 records with date 10-01-2009, item_code = 2 This query retur
-
How to increase size of individual column width in the filter screen of WAD
Hello all , Have a web application built in WAD. I have ran it in portal and want to put the filter on material.When the filter screen displayed , I selected the filter value on material and added it to selections. I am not able to see the full des