Moni Issue
Hi there ,
From yesterdays batch XI received messages from R3 through proxy and this messages are in Scheduled state on receiver ...receiver also proxy and with Java mapping...up to yester day it was working fine...but now we have this problem..
please any one suggest me what to ..we didnt change anything in ID.
Regards
rao
Peter,
this messages all ready in XI right? but in scheduled status....i will give u my trace on receiver side,,,
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
<Trace level="1" type="T">--start sender interface action determination </Trace>
<Trace level="1" type="T">select interface * </Trace>
<Trace level="1" type="T">select interface namespace </Trace>
<Trace level="1" type="T">no interface found </Trace>
<Trace level="1" type="T">--start receiver interface action determination </Trace>
<Trace level="1" type="T">Loop 0000000001 </Trace>
<Trace level="1" type="T">select interface ia_yyyyyyData* </Trace>
<Trace level="1" type="T">select interface namespace http://xxxx.net/pi/tttt_uk </Trace>
<Trace level="1" type="T">no interface found </Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found </Trace>
<Trace level="1" type="T">Hence set action to DEL </Trace>
</SAP:Trace>
can any one give some inputs after this trace message.
regards
rao
Similar Messages
-
Regarding Moni issue -Jdbc to Idoc Scenario
Hi Experts ,
I am working on one of the interface where my sender System is Database System (Oracle) and Receiver System is SAP ECC
we are using JDBC as Sender Channel to send Data to PI and Idoc as Receiver Channel which will Post the Idoc to ECC System (JDBC>PI>IDOC) .
Both IR and ID part is Configured and everything is working fine .
Now the Problem i am facing is in sxmb_moni . once the Test Data is triggred from the Sender System the Test Data is Passing through the Pipeline steps and i got the Success chequred Flag .
But when i check the Payload (RequestMessageMapping Level in Pipeline) i can see the payload in the below format as given below . even after mapping all the segments and nodes in Message mapping
<ACC_DOCUMENT02>
- <IDOC BEGIN="">
<E1BPACHE09 SEGMENT="" />
<E1BPACEXTC SEGMENT="" />
</IDOC>
</ACC_DOCUMENT02
Where as the actual Output should Come in the below format
<?xml version="1.0" encoding="UTF-8" ?>
- <ACC_DOCUMENT02>
- <IDOC BEGIN="">
- <E1BPACHE09 SEGMENT="">
<HEADER_TXT>3030/0533/000000/533</HEADER_TXT>
<COMP_CODE>1610</COMP_CODE>
<DOC_DATE>20110704</DOC_DATE>
<PSTNG_DATE>20110615</PSTNG_DATE>
<DOC_TYPE>ZD</DOC_TYPE>
<REF_DOC_NO>45834-A1</REF_DOC_NO>
</E1BPACHE09>
- <E1BPACAP09 SEGMENT="">
<ITEMNO_ACC>01</ITEMNO_ACC>
<VENDOR_NO>600040</VENDOR_NO>
<ALLOC_NMBR>3030/0533/000</ALLOC_NMBR>
<ITEM_TEXT>USD</ITEM_TEXT>
<SP_GL_IND>0</SP_GL_IND>
</E1BPACAP09>
- <E1BPACCR09 SEGMENT="">
<ITEMNO_ACC>01</ITEMNO_ACC>
<CURRENCY>USD</CURRENCY>
<AMT_DOCCUR>1545351.73</AMT_DOCCUR>
</E1BPACCR09>
- <E1BPACCR09 SEGMENT="">
<ITEMNO_ACC>01</ITEMNO_ACC>
<CURRENCY>USD</CURRENCY>
<AMT_DOCCUR>1545351.73</AMT_DOCCUR>
</E1BPACCR09>
- <E1BPACEXTC SEGMENT="">
<FIELD3 />
<FIELD4 />
</E1BPACEXTC>
</IDOC>
</ACC_DOCUMENT02>
Kindly Let me know if any one has gone through such problem and have any inputs to solve the above issue .
Help needed ..!!!
Regards,
Aziz khanI might want you to check first at JDBC sender level. GIving empty resultset or records will also show success status in jdbc side. Do the following
1) See your select statement and check whether your sql is right... Paste the select sql command in toad or some database tool and see what do you get? if you get empty records there is a possibility to have this kind of output.
2) Check your mapping fields and make sure you mapped as per requiremetn and activate it again.
3) Finally copy the output from sxmb_moni and test in the mapping tool. -
Proxies just and getting error No implementing class
Below are the steps I am seeing of a once functioning proxy any help will be greatly appreciated
When I send a test message from runtime workbench, it shows up in sxmb_moni as a green flag, clicking in the message I see the following error
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface SI_9002_SAP_FI_Send</Trace>
<Trace level="1" type="T">select interface namespace http://sempra.com/sapfi/AccountingData</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>
From SXMB_MONI I click into the queue and unlock to force a send, after doing that I recheck SXMB_MONI and the flag is red for failed with the following message
No implementing class registered for the interface
(ABAP interface, request message ..........)
I then check to ensure the proxies are still active along with the class and they are. I also ready about checking the rfc H connection via sm59 and doing the connection test I received a 500 empty HTTP Response which is good?
So my question, my proxies did work but all of the sudden are failing? Has anyone seen this issue before and if so any idea on how to fix it?
Cheers
Devlin<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
Check these:
Re: Moni Issue
no interface found
Regards,
Abhishek. -
Issue on Changing the Payroll Area in Mid of the Month from Biweekly to Mon
Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
ChandraHi Dilek,
If splits will be there definitely there will be two wagetypes but the amounts they'll have will be based on the rates of those periods.
Suppose an employee got payscale increase on 11th of the month, then employee will be paid at the rate of first payscale for first ten days then @ of second payscale on second 20 days.
So there won't be any inconsistency.
Regards,
Tomesh -
Cons Mon - Task group status issue
Hi All,
When we run the update at task group level system first stimulating the data & before accessing the cube its checking for authorisation and even if the user dont have authorisation its updating the task status.. & when we see the status of the task its showing the user name. which is giving lots of confusion to the other users.
How can we avoide it any advice will be very much appriciated.
Please let me know if any thing is not clear so that I can elabarate more.
Thanks
KamalHi Kamal,
Are you sure that the user does not have authorisation for ALL consolidation units in your hierachy?
eg if the user has updated the status of only 1 unit in the hierarchy then the top level group status will still be updated.
And of course, you can use transaction code SU53 to see which authorisations are being checked. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Issue in SAP Dialog process (Stop Workproc 3, PID 11754)
Dear All,
I have an issue in out system,
We are using SAP ECC 6 (7.00), running in OS Sun SPARC 9.
Oracle Database 10.2.0.4
last monday our Dialog server hung.
If I check in SM21, it said that the process is stop. the log in the os level didn't very help.
Please your help to find the root cause of this issue.
Below are the Trace from /usr/sap/<SID>/D40/work/
M Mon Aug 9 19:27:43 2010
M *** WARNING => ThSndDelUser: delete client/user 100/DELIVERAWP11 (T102) on server veccprod_AOP_30
M
M Mon Aug 9 21:41:29 2010
M ThAlarmHandler (1)
M ThAlarmHandler (1)
M ThAlarmHandler: set CONTROL_TIMEOUT/DP_CONTROL_JAVA_EXIT and break sql
M ThAlarmHandler: return from signal handler
M
M Mon Aug 9 21:42:29 2010
M ThAlarmHandler (2)
M ThAlarmHandler (2)
M ThAlarmHandler: 2. ALARM: terminate process (pid=11754, user is T146/M0)
M ThAlarmHandler: prv_action of W3: 0x2
M ThAlarmHandler: set clean state of T146/M0 to DP_TIMEOUT
M ThAlarmHandler: roll out T146/M0
M ThRollOut: roll out T146/U5516/M0/I1 (level=7, short_roll_out=0)
M ThCallHooks: call hook >SAP-Trace RFC save< for event BEFORE_ROLL_OUT
M TrThHookFunc: called for Rollout
M ThCallHooks: call hook >dyRollInOutHook< for event BEFORE_ROLL_OUT
M ThCallHooks: call hook >ITSP: RollOut< for event BEFORE_ROLL_OUT
M SosISearchAnchor: anchorArray allocated but no value stored yet
M ThCallHooks: call hook >rsts_before_rollout< for event BEFORE_ROLL_OUT
M SosISearchAnchor: anchorArray allocated but no value stored yet
M SosISearchAnchor: anchorArray allocated but no value stored yet
M ThCallHooks: call hook >abRtmRollOut< for event BEFORE_ROLL_OUT
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U5516 M0 I1 (Level 7) ok
M ThAlarmHandler: prv_action of W3: 0xa
M ThAlarmHandler: save snc contexts
M ThISncSaveAllContexts: save 0 snc contexts
M ThAlarmHandler: C-Stack during alarm handler
M -
C-STACK -
[0] DoStack2 ( 0x1063db3c0, 0xffffffff7fffa3a0, 0x1005739a4, 0x0, 0x14, 0x1036651f8 ), at 0x1005739a4
[1] CTrcStack2 ( 0x103f41940, 0x0, 0x1a000, 0x1036eb758, 0x100570cc4, 0x1036651f8 ), at 0x100573540
[2] ThAlarmHandler ( 0x1, 0x36eb400, 0x1, 0x1036cfd20, 0x1036cfac6, 0x1036ce730 ), at 0x10031bc84
[3] DpSigAlrm ( 0x0, 0x36ce400, 0x100000000, 0x1, 0x0, 0x1003199c0 ), at 0x100272724
[4] __sighndlr ( 0xe, 0x0, 0xffffffff7fffae70, 0x10027256c, 0x0, 0xd ), at 0xffffffff7c2d418c
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffae70, 0x0, 0x0, 0x0 ), at 0xffffffff7c2c7d28
[6] sigacthandler ( 0x0, 0x0, 0xffffffff7fffae70, 0xffffffff7d300200, 0x0, 0xffffffff7c43a000 ), at 0xffffffff7c2c7f20
[7] RqOsSem ( 0x2b, 0x16000158, 0x0, 0x1063e09d0, 0x100000000, 0xffffffff7fffb208 ), at 0x10029e930
[8] SemRq ( 0x16000158, 0x1, 0xffffffffffffffff, 0x103f23830, 0x2b, 0x1063f78f8 ), at 0x1002a00d4
[9] SpLockSema ( 0x104685ea8, 0xe, 0x2b, 0x36eb400, 0x0, 0x1036eb74c ), at 0x10184eca4
[10] SpOptGet ( 0xffffffff7fffb6c8, 0xffffffff7fffb538, 0x10257f800, 0x257f800, 0x100000000, 0x1 ), at 0x101821c2c
[11] OptAbapGetEntry ( 0xfffffffea512d6e0, 0x0, 0x0, 0x10, 0x3ca6000, 0xfffffffea512d390 ), at 0x101822440
[12] OptAbapGet ( 0x0, 0x0, 0xfffffffea512d6e0, 0x103ca6108, 0x0, 0x0 ), at 0x1018225fc
[13] SpOptAbapInterface ( 0x105dba764, 0x0, 0x0, 0x1039e7ab8, 0x0, 0x103ca62ec ), at 0x10182319c
[14] rspoacc_abap_cache_control ( 0x103a6a490, 0x1, 0x31b0c00, 0x105dba82c, 0x0, 0x1018230cc ), at 0x101978a38
[15] __1cIab_jcaly6F_v_ ( 0xfffffffe09f5ec7a, 0xfffffffe09f653cc, 0x106520538, 0xfffffffe09f61cd8, 0x103916558, 0x1 ), at 0x100c008a0
[16] __1cIab_extri6F_i_ ( 0x100000000, 0x6520400, 0x1f0, 0x1, 0x0, 0x3e ), at 0x1007a0948
[17] __1cJab_xevent6FpkH_i_ ( 0x0, 0x0, 0xfffffffe14b2db38, 0x0, 0x106520538, 0xd3a6 ), at 0x100a81978
[18] ab_dstep ( 0x1063fbc00, 0x100000000, 0x10236cb7c, 0x1063fbeb4, 0x0, 0x37 ), at 0x100c874a0
[19] dynpmcal ( 0xfffffffea5318dc0, 0x106bf3a30, 0xfffffffea53214f6, 0x103c1af00, 0x36ebc00, 0xfffffffea5319e78 ), at 0x1005998bc
[20] dynppai0 ( 0xfffffffea5318dc0, 0xfffffffea53206ec, 0x0, 0xfffffffea53206ec, 0x0, 0x496 ), at 0x100595b4c
[21] dynprctl ( 0xfffffffea5318dc0, 0x40, 0x1036cfb00, 0x1170, 0x1, 0x10fc ), at 0x1005945dc
[22] dynpen00 ( 0x1e240, 0x1, 0x100000000, 0x1118, 0xfffffffea5318dc0, 0x0 ), at 0x100590590
[23] TskhLoop ( 0x8, 0x1063e6f38, 0x2, 0x63e6c00, 0x1, 0x0 ), at 0x1002c63a8
[24] ThStart ( 0x1, 0x2b1400, 0x1002b1400, 0x100000000, 0x1, 0x0 ), at 0x1002b1fb4
[25] DpMain ( 0x3e8c000, 0x36ce400, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001db078
M -
M Mon Aug 9 21:42:30 2010
M ThCheckEmMagic: check em magic at 0xfffffffea5001460 for T146/M0/I1
M ThCheckEmMagic: em magic at 0xfffffffea5001460 for T146/M0/I1 o.k.
M ThEmContextDetach2: detach T146/M0 from em memory (em_hdl=31, force=0)
M ThEmContextDetach2: reset local em info
M ***LOG Q02=> wp_halt, WPStop (Workproc 3 11754) [dpuxtool.c 269]
trc file: "dev_w3", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 40
M sid AOP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 25502
M
M
M Mon Aug 9 21:42:59 2010
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ThInit: running on host prodaop
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@AOP on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10761ab80 0x107622640 0x107632dd8
C Attaching to DB Server AOP (con_hdl=0,svchp=0x107632d08,srvhp=0x107635058)
C Starting user session (con_hdl=0,svchp=0x107632d08,srvhp=0x107635058,usrhp=0x107622e58)
C Now '/@AOP' is connected: con_hdl=0, nls_hdl=0, session_id=697.
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x107632d08,usrhp=0x107622e58)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@AOP on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10761ab80 0x107622640 0x107632dd8
C Starting user session (con_hdl=0,svchp=0x107632d08,srvhp=0x107635058,usrhp=0x107622e58)
C Now 'SAPSR3/<pwd>@AOP' is connected: con_hdl=0, nls_hdl=0, session_id=692.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance AOP is running on eccprod with ORACLE version 10.2.0.4.0 since JUL 16, 2010, 21:55:15
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100809 214259 eccprod
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,*
.sar,*.gif
I MtxInit: 3 0 0
M SHM_PRES_BUF (addr: 0xffffffff7200a000, size: 20000000)
M SHM_ROLL_AREA (addr: 0xfffffffe4a000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xfffffffe40000000, size: 134217728)
M SHM_ROLL_ADM (addr: 0xffffffff73320000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff79d00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe38004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff79c00000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 3 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xfffffffe38092088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe380922d0, size: 480104)
B dbntab: Buffer FTAB(item array) (addr: 0xfffffffe38107638, size: 1920000)
B dbntab: Buffer FTAB(data area) (addr: 0xfffffffe382dc238, size: 61440000)
B dbntab: Buffer IREC(hash header) (addr: 0xfffffffe3bd78088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe3bd782d0, size: 480104)
B dbntab: Buffer IREC(item array) (addr: 0xfffffffe3bded638, size: 480000)
B dbntab: Buffer IREC(data area) (addr: 0xfffffffe3be62938, size: 8192000)
B dbntab: Buffer STAB(hash header) (addr: 0xfffffffe3c636088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe3c6362d0, size: 480104)
B dbntab: Buffer STAB(item array) (addr: 0xfffffffe3c6ab638, size: 480000)
B dbntab: Buffer STAB(data area) (addr: 0xfffffffe3c720938, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xfffffffe3ca12088, size: 5576)
B dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe3ca13650, size: 480104)
B dbntab: Buffer TTAB(item array) (addr: 0xfffffffe3ca889b8, size: 1200000)
B dbntab: Buffer TTAB(data area) (addr: 0xfffffffe3cbad938, size: 8760000)
B db_con_shm_ini: WP_ID = 3, WP_CNT = 48, CON_ID = 3000041
B dbstat: TABSTAT buffer attached (addr: 0xfffffffe34024008)
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe2e000100, size: 100000000, end: 0xfffffffe33f5e200)
B dbtbxbuf: Buffer TABLP (addr: 0xfffffffe2a000100, size: 61440000, end: 0xfffffffe2da98100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe26000108, size: 40960000, end: 0xfffffffe28710108)
B dbexpbuf: Buffer ESM (addr: 0xffffffff6b000108, size: 4194304, end: 0xffffffff6b400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe3d412108, size: 10240000, end: 0xfffffffe3ddd6108)
B dbexpbuf: Buffer OTR (addr: 0xffffffff6a800108, size: 4194304, end: 0xffffffff6ac00108)
B dbcalbuf: Buffer CALE (addr: 0xffffffff76f20000, size: 500000, end: 0xffffffff76f9a120)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x1078e2310
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
M
M Tue Aug 10 09:58:40 2010
M DpSigInt: caught signal 2
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 2)
M ThIErrHandle: new stat of W3 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering ThSetStatError
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 3 25502) [dpuxtool.c 269]
You have new mail in /var/mail//root
Thanks and Best Regards,
WidiDear Mark,
I posted the dev_w3 file.
Below are the dev_w0 and Dev_disp:
Mon Aug 9 21:41:08 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
gui_auto_logout exceeded for T92 but mode 0 still active - logout delayed
Mon Aug 9 21:41:48 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:42:28 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:42:58 2010
DpHdlDeadWp: restart wp (pid=6700) automatically
DpHdlDeadWp: restart wp (pid=11754) automatically
DpHdlDeadWp: restart wp (pid=27188) automatically
Mon Aug 9 21:42:59 2010
DpHdlDeadWp: restart wp (pid=7523) automatically
Mon Aug 9 21:43:32 2010
DpHdlDeadWp: restart wp (pid=15171) automatically
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:44:12 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:44:32 2010
DpHdlDeadWp: restart wp (pid=23058) automatically
Mon Aug 9 21:44:43 2010
DpHdlDeadWp: restart wp (pid=27680) automatically
DpHdlDeadWp: restart wp (pid=728) automatically
Mon Aug 9 21:44:52 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (3 rqs)
WARNING => DpEnvCheck: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Mon Aug 9 21:45:37 2010
DpHdlDeadWp: restart wp (pid=9775) automatically
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:46:00 2010
DpHdlDeadWp: restart wp (pid=11467) automatically
DpHdlDeadWp: restart wp (pid=16335) automatically
gui_auto_logout exceeded for T110 but mode 2 still active - logout delayed
Mon Aug 9 21:46:06 2010
DpHdlDeadWp: restart wp (pid=14628) automatically
Mon Aug 9 21:46:20 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:47:00 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
gui_auto_logout exceeded for T146 but mode 0 still active - logout delayed
Mon Aug 9 21:47:10 2010
DpHdlDeadWp: restart wp (pid=12269) automatically
Mon Aug 9 21:47:40 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:48:20 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
Mon Aug 9 21:49:12 2010
DpHdlDeadWp: restart wp (pid=15842) automatically
Mon Aug 9 21:49:13 2010
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (2 rqs)
and dev_w0
M Mon Aug 9 21:42:43 2010
M ThAlarmHandler (2)
M ThAlarmHandler (2)
M ThAlarmHandler: 2. ALARM: terminate process (pid=6700, user is T0/M0)
M ThAlarmHandler: prv_action of W0: 0x2
M ThAlarmHandler: set clean state of T0/M0 to DP_TIMEOUT
M ThAlarmHandler: roll out T0/M0
M ThRollOut: roll out T0/U1/M0/I0 (level=7, short_roll_out=0)
M ThCallHooks: call hook >SAP-Trace RFC save< for event BEFORE_ROLL_OUT
M TrThHookFunc: called for Rollout
M ThCallHooks: call hook >dyRollInOutHook< for event BEFORE_ROLL_OUT
M ThCallHooks: call hook >ITSP: RollOut< for event BEFORE_ROLL_OUT
M ThCallHooks: call hook >rsts_before_rollout< for event BEFORE_ROLL_OUT
M ThCallHooks: call hook >abRtmRollOut< for event BEFORE_ROLL_OUT
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U1 M0 I0 (Level 7) ok
M ThAlarmHandler: prv_action of W0: 0xa
M ThAlarmHandler: save snc contexts
M ThISncSaveAllContexts: save 0 snc contexts
M ThAlarmHandler: C-Stack during alarm handler
M -
C-STACK -
[0] DoStack2 ( 0x1063db3c0, 0xffffffff7fffdc90, 0x1005739a4, 0x0, 0x14, 0x1036651f8 ), at 0x1005739a4
[1] CTrcStack2 ( 0x103f41940, 0x0, 0x1a000, 0x1036eb758, 0x100570cc4, 0x1036651f8 ), at 0x100573540
[2] ThAlarmHandler ( 0x1, 0x36eb400, 0x1, 0x1036cfd20, 0x1036cfac6, 0x1036ce730 ), at 0x10031bc84
[3] DpSigAlrm ( 0x0, 0x36ce400, 0x100000000, 0x1, 0x0, 0x1003199c0 ), at 0x100272724
[4] __sighndlr ( 0xe, 0x0, 0xffffffff7fffe760, 0x10027256c, 0x0, 0xd ), at 0xffffffff7c2d418c
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffe760, 0x0, 0x0, 0x0 ), at 0xffffffff7c2c7d28
[6] sigacthandler ( 0x0, 0x0, 0xffffffff7fffe760, 0xffffffff7d300200, 0x0, 0xffffffff7c43a000 ), at 0xffffffff7c2c7f20
[7] RqOsSem ( 0x2b, 0x16000158, 0x0, 0x1063e09d0, 0x100000000, 0xffffffff7fffeaf8 ), at 0x10029e930
[8] SemRq ( 0x16000158, 0x1, 0xffffffffffffffff, 0x103f23830, 0x2b, 0x1063f78f8 ), at 0x1002a00d4
[9] SpLockSema ( 0x104685ea8, 0xe, 0x2b, 0x36eb400, 0x0, 0x1036eb74c ), at 0x10184eca4
[10] LockGlobalLock ( 0xfffffffe3dddb334, 0x1, 0x1036eb400, 0x36eb400, 0x100000000, 0x1 ), at 0x1017fd260
[11] Global_writelockRWLock ( 0xfffffffe3dddb2e0, 0x1039edc00, 0x39edc00, 0x100000000, 0x1, 0x0 ), at 0x1017fde5c
[12] writelockRWLock ( 0xfffffffe3dddb2e0, 0x0, 0x0, 0x1039e7ab8, 0x0, 0x103c9e6bc ), at 0x1017ff93c
[13] SrvWriteLock ( 0x0, 0xfffffffe3dddb2c8, 0x1039f0400, 0x39f0400, 0x100000000, 0x1 ), at 0x101844604
[14] SpSrvAdmin ( 0x1, 0xffffffff7ffff358, 0x0, 0x1039f0bc8, 0x103cb0c90, 0x0 ), at 0x10184b1ac
[15] SpAdXAdmin ( 0xffffffff7ffff34c, 0x3166400, 0xffffffff7ffff47f, 0x3166400, 0x104687780, 0x100000000 ), at 0x1017e78d8
[16] AdIExecBlkConv ( 0x1075374ec, 0x10041b368, 0x1061d18e8, 0x1, 0x107537460, 0x7770 ), at 0x101d0e288
[17] TskhLoop ( 0x100000000, 0x0, 0x0, 0x0, 0x1036eb400, 0x1 ), at 0x1002c2738
[18] ThStart ( 0x1, 0x2b1400, 0x1002b1400, 0x100000000, 0x1, 0x0 ), at 0x1002b1fb4
[19] DpMain ( 0x3e8c000, 0x36ce400, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001db078
M -
M ThEmContextDetach2: detach T0/M0 from em memory (em_hdl=25, force=0)
M ThEmContextDetach2: reset local em info
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6700) [dpuxtool.c 269]
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 40
M sid AOP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 25501
M
M
M Mon Aug 9 21:42:59 2010
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ThInit: running on host prodaop
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@AOP on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10761ab80 0x107622640 0x107632dd8
C Attaching to DB Server AOP (con_hdl=0,svchp=0x107632d08,srvhp=0x107635058)
C Starting user session (con_hdl=0,svchp=0x107632d08,srvhp=0x107635058,usrhp=0x107622e58)
C Now '/@AOP' is connected: con_hdl=0, nls_hdl=0, session_id=669.
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x107632d08,usrhp=0x107622e58)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@AOP on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10761ab80 0x107622640 0x107632dd8
C Starting user session (con_hdl=0,svchp=0x107632d08,srvhp=0x107635058,usrhp=0x107622e58)
C Now 'SAPSR3/<pwd>@AOP' is connected: con_hdl=0, nls_hdl=0, session_id=669.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance AOP is running on eccprod with ORACLE version 10.2.0.4.0 since JUL 16, 2010, 21:55:15
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100809 214259 eccprod
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,*
.sar,*.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0xffffffff7200a000, size: 20000000)
M SHM_ROLL_AREA (addr: 0xfffffffe4a000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xfffffffe40000000, size: 134217728)
M SHM_ROLL_ADM (addr: 0xffffffff73320000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff79d00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe38004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff79c00000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xfffffffe38092088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe380922d0, size: 480104)
B dbntab: Buffer FTAB(item array) (addr: 0xfffffffe38107638, size: 1920000)
B dbntab: Buffer FTAB(data area) (addr: 0xfffffffe382dc238, size: 61440000)
B dbntab: Buffer IREC(hash header) (addr: 0xfffffffe3bd78088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe3bd782d0, size: 480104)
B dbntab: Buffer IREC(item array) (addr: 0xfffffffe3bded638, size: 480000)
B dbntab: Buffer IREC(data area) (addr: 0xfffffffe3be62938, size: 8192000)
B dbntab: Buffer STAB(hash header) (addr: 0xfffffffe3c636088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe3c6362d0, size: 480104)
B dbntab: Buffer STAB(item array) (addr: 0xfffffffe3c6ab638, size: 480000)
B dbntab: Buffer STAB(data area) (addr: 0xfffffffe3c720938, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xfffffffe3ca12088, size: 5576)
B dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe3ca13650, size: 480104)
B dbntab: Buffer TTAB(item array) (addr: 0xfffffffe3ca889b8, size: 1200000)
B dbntab: Buffer TTAB(data area) (addr: 0xfffffffe3cbad938, size: 8760000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 48, CON_ID = 45
B dbstat: TABSTAT buffer attached (addr: 0xfffffffe34024008)
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe2e000100, size: 100000000, end: 0xfffffffe33f5e200)
B dbtbxbuf: Buffer TABLP (addr: 0xfffffffe2a000100, size: 61440000, end: 0xfffffffe2da98100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe26000108, size: 40960000, end: 0xfffffffe28710108)
B dbexpbuf: Buffer ESM (addr: 0xffffffff6b000108, size: 4194304, end: 0xffffffff6b400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe3d412108, size: 10240000, end: 0xfffffffe3ddd6108)
B dbexpbuf: Buffer OTR (addr: 0xffffffff6a800108, size: 4194304, end: 0xffffffff6ac00108)
B dbcalbuf: Buffer CALE (addr: 0xffffffff76f20000, size: 500000, end: 0xffffffff76f9a120)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x1078e2310
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
M
M Tue Aug 10 09:58:40 2010
M DpSigInt: caught signal 2
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 2)
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering ThSetStatError
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 25501) [dpuxtool.c 269]
Best Regards,
Widi -
[SOLVED] IBM Thinkpad 600E 3.6.11-1 rt73usb weird wireless issue.
Hi guys and gals.
I have been researching this for 3 days now. I have also asked at the #Archlinux channel but they don't seem to know the answer and I cannot seem to find anything relevant... so here goes nothing.
I have this Belkin rt73usb card - it's connected to this SUPER OLD Thinkpad 600E machine and it's associated always with only 1 router - static IP setup - basically laptop is stationary / not moved. I had little problems with connecting it to the network at boot time but thanks to Boohbah from #Archlinux channel and a bit of research I got it to connect http://sparewotw.wordpress.com/2013/01/ … boot-time/ and to turn off power management and to keep the rate as "fixed" - works well BUT... I have a problem with it - the connection stays up - I can browse the internet from the thinkpad / I can access the sshfs share on my server (from thinkpad) and so on but after a while sshd port - 50505 in my case - goes from open into filtered and I cannot connect to it anymore. Example - rebooted thinkpad - i can connect - thinkpad was left alone for lets say sometimes 10 minutes - sometimes an hour - connection is active but I cannot ssh to the machine anymore.
I have been running shorewall as a firewall and I said maybe it's a shorewall bug but then I ran as root shorewall clear and it didn't solved it, disabling shorewall or restarting didn't help, restarting sshd service didn't help only restarting the wlan0 service / connection re-opens the port... Any ideas?
All I get is "No route to host" and when I nmap the port it's not open anymore... it says filtered without firewall enabled / active...
The connecting method has nothing to do with failures as netcfg (which started connecting at boot time after adding pci=noacpi to the boot time kernel parameters) is doing the exact same thing...
Also when powermanagement was on and the rate was not fixed the problem was still occuring...
Connection info is available at the link mentioned above.
Some more technical data:
lspci -k
[root@wishthinkpad andrzejl]# lspci -k
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1251A
Subsystem: IBM Device 00eb
Kernel driver in use: yenta_cardbus
00:02.1 CardBus bridge: Texas Instruments PCI1251A
Subsystem: IBM Device 00eb
Kernel driver in use: yenta_cardbus
00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM CS4610 SoundFusion Audio Accelerator
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
Kernel driver in use: ata_piix
00:07.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
Kernel driver in use: uhci_hcd
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 12)
Subsystem: IBM ThinkPad 570
[root@wishthinkpad andrzejl]#
lscpi -vvv
[root@wishthinkpad andrzejl]# lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at 40000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: 70000000-dfffffff
Prefetchable memory behind bridge: e0000000-f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:02.0 CardBus bridge: Texas Instruments PCI1251A
Subsystem: IBM Device 00eb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 1c000000-1fffffff (prefetchable)
Memory window 1: 20000000-23ffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
00:02.1 CardBus bridge: Texas Instruments PCI1251A
Subsystem: IBM Device 00eb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 50101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 24000000-27ffffff (prefetchable)
Memory window 1: 28000000-2bffffff
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM CS4610 SoundFusion Audio Accelerator
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=1M]
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at fcf0 [size=16]
Kernel driver in use: ata_piix
00:07.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 8400 [size=32]
Kernel driver in use: uhci_hcd
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 12) (prog-if 00 [VGA controller])
Subsystem: IBM ThinkPad 570
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (4000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at 70000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at 70400000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
[root@wishthinkpad andrzejl]#
inxi -v7
[root@wishthinkpad andrzejl]# inxi -v7
System: Host: wishthinkpad.loc Kernel: 3.6.11-1-ARCH i686 (32 bit, gcc: 4.7.2)
Desktop: N/A info: lxpanel dm: lxdm Distro: Arch Linux
Machine: Mobo: IBM model: 26458A0 serial: J197K75421N Bios: IBM version: INET24WW date: 05/24/1999
CPU: Single core Mobile Pentium II (-UP-) cache: 256 KB flags: (-) bmips: 728.23 clocked at 363.955 MHz
Graphics: Card: Neomagic NM2200 [MagicGraph 256AV] bus-ID: 01:00.0 chip-ID: 10c8:0005
X.org: 1.13.1 driver: neomagic tty size: 116x32 Advanced Data: N/A for root
Audio: Card: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator]
driver: CS4239 bus-ID: 00:06.0 chip-ID: 1013:6001
Sound: Advanced Linux Sound Architecture ver: 1.0.25
Network: Card: Ralink RT2501/RT2573 Wireless Adapter driver: rt73usb ver: 2.3.0 usb-ID: 001-003 chip-ID: 148f:2573
IF: wlan0 state: up mac: 00:0e:2e:f4:db:4c
WAN IP: None Detected! IF: wlan0 ip: 192.168.0.102 ip-v6: N/A
Drives: HDD Total Size: 40.0GB (84.5% used)
1: id: /dev/sda model: TOSHIBA_MK4032GA size: 40.0GB serial: 66SJ8501S
Optical: /dev/sr0 model: N/A rev: N/A dev-links: cdrom
Features: speed: 24x multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw state: N/A
Partition: ID: / size: 9.4G used: 6.9G (77%) fs: ext4 dev: /dev/sda1
label: N/A uuid: 350fa8e9-36fb-4927-abaf-91f4b958a679
ID: /media/Extra size: 26G used: 24G (99%) fs: ext4 dev: /dev/sda7
label: Data uuid: e4eb21d7-8ea8-4059-b44b-778690e44675
ID: /home size: 1004M used: 834M (88%) fs: ext4 dev: /dev/sda6
label: N/A uuid: 567947ca-cba3-42e4-9677-e9ddeecd2c26
ID: swap-1 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: 0a64bde1-82c3-4cfb-ab68-7178564d8ed5
RAID: No RAID data available - /proc/mdstat is missing - is md_mod kernel module loaded?
Unmounted: ID: /dev/sr0 size: 1.07G label: N/A uuid: N/A
Sensors: System Temperatures: cpu: 60.8C mobo: 24.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 85 Uptime: 5 min Memory: 65.5/404.5MB Runlevel: 5 Gcc sys: 4.7.2
Client: Shell (bash 4.2.42) inxi: 1.8.26
[root@wishthinkpad andrzejl]#
lsmod
[root@wishthinkpad andrzejl]# lsmod
Module Size Used by
fuse 60479 4
ablk_helper 1529 0
cryptd 7390 1 ablk_helper
aes_i586 6980 1
aes_generic 26055 1 aes_i586
arc4 1604 2
rt73usb 22629 0
rt2x00usb 7823 1 rt73usb
rt2x00lib 32012 2 rt73usb,rt2x00usb
mac80211 367308 2 rt2x00lib,rt2x00usb
cfg80211 153457 2 mac80211,rt2x00lib
rfkill 12569 2 cfg80211
ppdev 4751 0
crc_itu_t 1096 1 rt73usb
joydev 7696 0
ac 1893 0
battery 5691 0
microcode 8922 0
irda 91023 0
parport_pc 26474 0
parport 26032 2 ppdev,parport_pc
ns558 1832 0
video 9964 0
crc_ccitt 1096 1 irda
gameport 6265 2 ns558
pcmcia 31186 0
fan 1999 0
thermal 6660 0
intel_agp 8593 1
psmouse 71891 0
shpchp 22302 0
intel_gtt 12212 1 intel_agp
i2c_piix4 7288 0
yenta_socket 18841 0
processor 24040 1
pci_hotplug 20151 1 shpchp
agpgart 21936 2 intel_agp,intel_gtt
pcmcia_rsrc 8809 1 yenta_socket
serio_raw 3714 0
button 3711 0
i2c_core 16944 1 i2c_piix4
evdev 7663 8
pcmcia_core 10242 3 pcmcia,pcmcia_rsrc,yenta_socket
ext4 402657 3
crc16 1092 1 ext4
jbd2 66384 1 ext4
mbcache 4387 1 ext4
hid_generic 710 0
usbhid 32211 0
hid 68226 2 hid_generic,usbhid
sr_mod 13149 0
cdrom 30345 1 sr_mod
sd_mod 27312 5
ata_generic 2435 0
pata_acpi 2400 0
ata_piix 19705 4
libata 146129 3 pata_acpi,ata_generic,ata_piix
uhci_hcd 19841 0
usbcore 126796 4 uhci_hcd,rt73usb,rt2x00usb,usbhid
scsi_mod 113073 3 libata,sd_mod,sr_mod
usb_common 623 1 usbcore
floppy 48487 0
snd_cs4236 22145 0
snd_mpu401_uart 4944 1 snd_cs4236
snd_rawmidi 14983 1 snd_mpu401_uart
snd_opl3_lib 7187 1 snd_cs4236
snd_hwdep 4843 1 snd_opl3_lib
snd_seq_device 4285 2 snd_rawmidi,snd_opl3_lib
snd_wss_lib 18180 1 snd_cs4236
snd_pcm 61958 2 snd_wss_lib,snd_cs4236
snd_page_alloc 5902 2 snd_wss_lib,snd_pcm
snd_timer 14903 3 snd_wss_lib,snd_pcm,snd_opl3_lib
snd 45098 9 snd_hwdep,snd_timer,snd_wss_lib,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_cs4236,snd_opl3_lib
soundcore 4379 1 snd
[root@wishthinkpad andrzejl]#
lsusb -v
[root@wishthinkpad andrzejl]# lsusb -v
Bus 001 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9254 Hub
bcdDevice 3.12
iManufacturer 1 ALCOR
iProduct 2 Generic USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 22 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0303 lowspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.06
iManufacturer 3 Linux 3.6.11-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:07.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x148f Ralink Technology, Corp.
idProduct 0x2573 RT2501/RT2573 Wireless Adapter
bcdDevice 0.01
iManufacturer 1 Ralink
iProduct 2 802.11 bg WLAN
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 004: ID 04fc:0538 Sunplus Technology Co., Ltd Wireless Optical Mouse 2.4G [Bright]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04fc Sunplus Technology Co., Ltd
idProduct 0x0538 Wireless Optical Mouse 2.4G [Bright]
bcdDevice 1.10
iManufacturer 1 MLK
iProduct 2 Silvercrest OM1008
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 HID RF Receiver
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 5 EP1 Interrupt
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 114
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
[root@wishthinkpad andrzejl]#
iwconfig
[root@wishthinkpad andrzejl]# iwconfig
wlan0 IEEE 802.11bg ESSID:"Arch_Linux_User"
Mode:Managed Frequency:2.412 GHz Access Point: 00:18:39:A0:DB:3E
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=64/70 Signal level=-46 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:5 Missed beacon:0
lo no wireless extensions.
[root@wishthinkpad andrzejl]#
ifconfig
[root@wishthinkpad andrzejl]# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 526 bytes 275160 (268.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 526 bytes 275160 (268.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.102 netmask 255.255.255.0 broadcast 192.168.0.255
ether 00:0e:2e:f4:db:4c txqueuelen 1000 (Ethernet)
RX packets 1590 bytes 381744 (372.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1238 bytes 194926 (190.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@wishthinkpad andrzejl]#
dmesg right after reboot when it works
[root@wishthinkpad andrzejl]# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.11-1-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000019fcffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000019fd0000-0x0000000019fdefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000019fdf000-0x0000000019fdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000019fe0000-0x0000000019ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
[ 0.000000] Malformed early option 'apic'
[ 0.000000] Malformed early option 'apic'
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: IBM 26458A0/26458A0, BIOS INET24WW 05/24/1999
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x19fd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFE000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x19fcffff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x19bfffff] page 2M
[ 0.000000] [mem 0x19c00000-0x19fcffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x19fcffff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x18c36000-0x18f14fff]
[ 0.000000] IBM Thinkpad 600 Series 2645 detected: force use of acpi=noirq
[ 0.000000] ACPI: RSDP 000fd6e0 00014 (v00 IBM )
[ 0.000000] ACPI: RSDT 19fd0000 00028 (v01 IBM TP600R 00000001 00000000)
[ 0.000000] ACPI: FACP 19fd0100 00074 (v01 IBM TP600R 00000001 00000000)
[ 0.000000] ACPI: DSDT 19fd0200 0B501 (v01 IBM TP600R 0000001D MSFT 0100000B)
[ 0.000000] ACPI: FACS 19fdf000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 415MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 19fd0000
[ 0.000000] low ram: 0 - 19fd0000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x19fcffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x19fcffff]
[ 0.000000] On node 0 totalpages: 106335
[ 0.000000] free_area_init_node: node 0, pgdat c155acc0, node_mem_map d9c8f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 800 pages used for memmap
[ 0.000000] Normal zone: 101552 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xef08
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Could not enable APIC!
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x1a000000-0xfffdffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @d9c7e000 s32384 r0 d20864 u53248
[ 0.000000] pcpu-alloc: s32384 r0 d20864 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105503
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=350fa8e9-36fb-4927-abaf-91f4b958a679 ro quiet pci=noacpi lapic apic acpi=noirq apm=on pci=use_crs
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 851456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 410744k/425792k available (3974k kernel code, 14596k reserved, 1545k data, 536k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xda7d0000 - 0xff7fe000 ( 592 MB)
lowmem : 0xc0000000 - 0xd9fd0000 ( 415 MB)
.init : 0xc1564000 - 0xc15ea000 ( 536 kB)
.data : 0xc13e18b2 - 0xc1563fc0 (1545 kB)
.text : 0xc1000000 - 0xc13e18b2 (3974 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d9408000 soft=d940a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 363.955 MHz processor
[ 0.006677] Calibrating delay loop (skipped), value calculated using timer frequency.. 728.23 BogoMIPS (lpj=1213183)
[ 0.006704] pid_max: default: 32768 minimum: 301
[ 0.006934] Security Framework initialized
[ 0.006969] AppArmor: AppArmor disabled by boot time parameter
[ 0.007122] Mount-cache hash table entries: 512
[ 0.008703] Initializing cgroup subsys cpuacct
[ 0.008725] Initializing cgroup subsys memory
[ 0.008789] Initializing cgroup subsys devices
[ 0.008805] Initializing cgroup subsys freezer
[ 0.008820] Initializing cgroup subsys net_cls
[ 0.008833] Initializing cgroup subsys blkio
[ 0.010131] mce: CPU supports 5 MCE banks
[ 0.010255] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift is 0x6
[ 0.010345] SMP alternatives: switching to UP code
[ 0.030215] Freeing SMP alternatives: 16k freed
[ 0.030302] ACPI: Core revision 20120711
[ 0.064159] ACPI: setting ELCR to 0a00 (from 0800)
[ 0.066739] ftrace: allocating 17427 entries in 35 pages
[ 0.110222] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.110255] smpboot: SMP motherboard not detected
[ 0.110269] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.110278] smpboot: SMP disabled
[ 0.110291] Performance Events:
[ 0.110308] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.110319] no hardware sampling interrupt available.
[ 0.110332] p6 PMU driver.
[ 0.110348] ... version: 0
[ 0.110358] ... bit width: 32
[ 0.110367] ... generic registers: 2
[ 0.110378] ... value mask: 00000000ffffffff
[ 0.110389] ... max period: 000000007fffffff
[ 0.110398] ... fixed-purpose events: 0
[ 0.110408] ... event mask: 0000000000000003
[ 0.137539] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[ 0.137923] Brought up 1 CPUs
[ 0.137943] smpboot: Total of 1 processors activated (728.23 BogoMIPS)
[ 0.139405] devtmpfs: initialized
[ 0.141359] PM: Registering ACPI NVS region [mem 0x19fdf000-0x19fdffff] (4096 bytes)
[ 0.152637] NET: Registered protocol family 16
[ 0.154302] ACPI: bus type pci registered
[ 0.159739] PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
[ 0.159754] PCI: Using configuration type 1 for base access
[ 0.164680] bio: create slab <bio-0> at 0
[ 0.165221] ACPI: Added _OSI(Module Device)
[ 0.165239] ACPI: Added _OSI(Processor Device)
[ 0.165254] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.165270] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.174743] ACPI: EC: Look up EC in DSDT
[ 0.561367] ACPI: Interpreter enabled
[ 0.561420] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.561831] ACPI: Using PIC for interrupt routing
[ 0.570305] ACPI: Power Resource [PVID] (on)
[ 0.572694] ACPI: Power Resource [PSIO] (on)
[ 0.574878] ACPI: Power Resource [PRSD] (off)
[ 0.629330] ACPI: Power Resource [PFN0] (off)
[ 0.630906] ACPI: Power Resource [PFN1] (off)
[ 0.636194] ACPI: Power Resource [PDCK] (on)
[ 0.637240] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
[ 0.641373] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.641842] vgaarb: loaded
[ 0.642190] PCI: Probing PCI hardware
[ 0.642209] PCI: root bus 00: using default resources
[ 0.642221] PCI: Probing PCI hardware (bus 00)
[ 0.642464] PCI host bridge to bus 0000:00
[ 0.642497] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.642519] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.642539] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.642568] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.642638] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.642688] pci 0000:00:00.0: reg 10: [mem 0x40000000-0x43ffffff pref]
[ 0.642858] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.642983] pci 0000:00:02.0: [104c:ac1d] type 02 class 0x060700
[ 0.643038] pci 0000:00:02.0: reg 10: [mem 0x50102000-0x50102fff]
[ 0.643117] pci 0000:00:02.0: supports D1 D2
[ 0.643137] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.643214] pci 0000:00:02.1: [104c:ac1d] type 02 class 0x060700
[ 0.643333] pci 0000:00:02.1: reg 10: [mem 0x50101000-0x50101fff]
[ 0.643414] pci 0000:00:02.1: supports D1 D2
[ 0.643434] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.643527] pci 0000:00:06.0: [1013:6001] type 00 class 0x040100
[ 0.643575] pci 0000:00:06.0: reg 10: [mem 0x50100000-0x50100fff]
[ 0.643613] pci 0000:00:06.0: reg 14: [mem 0x50000000-0x500fffff]
[ 0.643780] pci 0000:00:07.0: [8086:7110] type 00 class 0x068000
[ 0.643978] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
[ 0.644084] pci 0000:00:07.1: reg 20: [io 0xfcf0-0xfcff]
[ 0.644199] pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
[ 0.644308] pci 0000:00:07.2: reg 20: [io 0x8400-0x841f]
[ 0.644422] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
[ 0.644441] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.644601] pci 0000:00:07.3: quirk: [io 0xef00-0xef3f] claimed by PIIX4 ACPI
[ 0.644626] pci 0000:00:07.3: quirk: [io 0xefa0-0xefaf] claimed by PIIX4 SMB
[ 0.644652] pci 0000:00:07.3: PIIX4 devres B PIO at 02f8-02ff
[ 0.644674] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
[ 0.644696] pci 0000:00:07.3: PIIX4 devres E PIO at 0538-053f
[ 0.644720] pci 0000:00:07.3: PIIX4 devres G PIO at 0130-013f
[ 0.644744] pci 0000:00:07.3: PIIX4 devres I PIO at 002e-002f
[ 0.644898] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.644954] pci 0000:01:00.0: [10c8:0005] type 00 class 0x030000
[ 0.645006] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.645042] pci 0000:01:00.0: reg 14: [mem 0x70000000-0x703fffff]
[ 0.645077] pci 0000:01:00.0: reg 18: [mem 0x70400000-0x704fffff]
[ 0.645196] pci 0000:01:00.0: supports D1 D2
[ 0.645293] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.645319] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.645344] pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
[ 0.645369] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
[ 0.645481] pci_bus 0000:02: busn_res: [bus 02-ff] is inserted under [bus 00-ff]
[ 0.645511] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.645597] pci_bus 0000:06: busn_res: [bus 06-ff] is inserted under [bus 00-ff]
[ 0.645625] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[ 0.645655] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.647922] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.648802] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
[ 0.648892] PCI: pci_cache_line_size set to 32 bytes
[ 0.649047] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.649064] e820: reserve RAM buffer [mem 0x19fd0000-0x1bffffff]
[ 0.649911] NetLabel: Initializing
[ 0.649928] NetLabel: domain hash size = 128
[ 0.649990] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.650100] NetLabel: unlabeled traffic allowed by default
[ 0.650468] Switching to clocksource pit
[ 0.711237] pnp: PnP ACPI init
[ 0.711384] ACPI: bus type pnp registered
[ 0.713292] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.713318] pnp 00:00: [mem 0x000c0000-0x000cbfff]
[ 0.713339] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.713359] pnp 00:00: [mem 0x00100000-0x19ffffff]
[ 0.713379] pnp 00:00: [mem 0xfffe0000-0xffffffff]
[ 0.713727] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.713755] system 00:00: [mem 0x000c0000-0x000cbfff] could not be reserved
[ 0.713779] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.713802] system 00:00: [mem 0x00100000-0x19ffffff] could not be reserved
[ 0.713827] system 00:00: [mem 0xfffe0000-0xffffffff] has been reserved
[ 0.713864] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.713985] pnp 00:01: [bus 00-ff]
[ 0.714037] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.714060] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.714081] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.714103] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.714124] pnp 00:01: [mem 0x000cc000-0x000effff window]
[ 0.714145] pnp 00:01: [mem 0x1a000000-0xffdfffff window]
[ 0.714436] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.714937] pnp 00:02: [io 0x03f0-0x03f5]
[ 0.714959] pnp 00:02: [io 0x03f7]
[ 0.714986] pnp 00:02: [irq 6]
[ 0.715008] pnp 00:02: [dma 2]
[ 0.715317] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.715952] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.716936] pnp 00:04: [io 0x03bc-0x03bf]
[ 0.716964] pnp 00:04: [irq 7]
[ 0.717518] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.718750] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.718775] pnp 00:05: [irq 4]
[ 0.718795] pnp 00:05: [dma 3]
[ 0.719828] pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
[ 0.724699] pnp 00:06: [io 0x0538-0x053f]
[ 0.725031] pnp 00:06: Plug and Play ACPI device, IDs CSC0110 (active)
[ 0.733111] pnp 00:07: [io 0x0530-0x0537]
[ 0.733135] pnp 00:07: [io 0x0388-0x038b]
[ 0.733155] pnp 00:07: [io 0x0220-0x0233]
[ 0.733179] pnp 00:07: [irq 5]
[ 0.733198] pnp 00:07: [dma 1]
[ 0.733216] pnp 00:07: [dma 0]
[ 0.733642] pnp 00:07: Plug and Play ACPI device, IDs CSC0100 (active)
[ 0.735954] pnp 00:08: [io 0x0200-0x0207]
[ 0.736302] pnp 00:08: Plug and Play ACPI device, IDs CSC0101 PNPb02f (active)
[ 0.741151] pnp 00:09: Plug and Play ACPI device, IDs CSC0103 (disabled)
[ 0.749141] pnp 00:0a: [io 0x0130-0x013f]
[ 0.749165] pnp 00:0a: [io 0x02f8-0x02ff]
[ 0.749189] pnp 00:0a: [irq 3]
[ 0.749209] pnp 00:0a: [irq 10]
[ 0.749228] pnp 00:0a: [dma 7]
[ 0.752374] pnp 00:0a: Plug and Play ACPI device, IDs IBM3765 (active)
[ 0.752895] pnp 00:0b: [io 0x0000-0x000f]
[ 0.752917] pnp 00:0b: [io 0x0080-0x008f]
[ 0.752937] pnp 00:0b: [io 0x00c0-0x00df]
[ 0.752956] pnp 00:0b: [dma 4]
[ 0.753206] pnp 00:0b: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.753287] pnp 00:0c: [io 0x0061]
[ 0.753520] pnp 00:0c: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.753616] pnp 00:0d: [io 0x0022]
[ 0.753638] pnp 00:0d: [io 0x0092]
[ 0.753657] pnp 00:0d: [io 0x00b2]
[ 0.753676] pnp 00:0d: [io 0x002e-0x002f]
[ 0.753695] pnp 00:0d: [io 0x15e0-0x15ef]
[ 0.753714] pnp 00:0d: [io 0xef00-0xef3f]
[ 0.753733] pnp 00:0d: [io 0xefa0-0xefaf]
[ 0.754086] system 00:0d: [io 0x15e0-0x15ef] has been reserved
[ 0.754112] system 00:0d: [io 0xef00-0xef3f] has been reserved
[ 0.754135] system 00:0d: [io 0xefa0-0xefaf] has been reserved
[ 0.754168] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.754256] pnp 00:0e: [io 0x00f0-0x00ff]
[ 0.754281] pnp 00:0e: [irq 13]
[ 0.754519] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.754608] pnp 00:0f: [io 0x0060]
[ 0.754629] pnp 00:0f: [io 0x0064]
[ 0.754650] pnp 00:0f: [irq 1]
[ 0.754887] pnp 00:0f: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.754973] pnp 00:10: [irq 12]
[ 0.755233] pnp 00:10: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.755324] pnp 00:11: [io 0x0070-0x0073]
[ 0.755347] pnp 00:11: [irq 8]
[ 0.755587] pnp 00:11: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.761409] pnp: PnP ACPI: found 18 devices
[ 0.761429] ACPI: ACPI bus type pnp unregistered
[ 0.812245] Switching to clocksource acpi_pm
[ 0.812534] pci 0000:00:02.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.812561] pci 0000:00:02.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.812586] pci 0000:00:02.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.812610] pci 0000:00:02.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.812633] pci 0000:00:02.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.812655] pci 0000:00:02.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.812760] pci 0000:00:02.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.812785] pci 0000:00:02.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.812829] pci 0000:00:02.0: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
[ 0.812855] pci 0000:00:02.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
[ 0.812882] pci 0000:00:02.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[ 0.812907] pci 0000:00:02.1: BAR 16: assigned [mem 0x28000000-0x2bffffff]
[ 0.812937] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.812963] pci 0000:00:02.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.812990] pci 0000:00:02.1: BAR 13: assigned [io 0x1800-0x18ff]
[ 0.813016] pci 0000:00:02.1: BAR 14: assigned [io 0x1c00-0x1cff]
[ 0.813047] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.813073] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.813101] pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
[ 0.813126] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
[ 0.813154] pci 0000:00:02.0: CardBus bridge to [bus 02-05]
[ 0.813174] pci 0000:00:02.0: bridge window [io 0x1000-0x10ff]
[ 0.813199] pci 0000:00:02.0: bridge window [io 0x1400-0x14ff]
[ 0.813224] pci 0000:00:02.0: bridge window [mem 0x1c000000-0x1fffffff pref]
[ 0.813249] pci 0000:00:02.0: bridge window [mem 0x20000000-0x23ffffff]
[ 0.813273] pci 0000:00:02.1: CardBus bridge to [bus 06-09]
[ 0.813293] pci 0000:00:02.1: bridge window [io 0x1800-0x18ff]
[ 0.813316] pci 0000:00:02.1: bridge window [io 0x1c00-0x1cff]
[ 0.813341] pci 0000:00:02.1: bridge window [mem 0x24000000-0x27ffffff pref]
[ 0.813416] pci 0000:00:02.1: bridge window [mem 0x28000000-0x2bffffff]
[ 0.813478] PCI: setting IRQ 11 as level-triggered
[ 0.813500] pci 0000:00:02.0: found PCI INT A -> IRQ 11
[ 0.813572] pci 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0
[ 0.813615] pci 0000:00:02.1: found PCI INT B -> IRQ 11
[ 0.813694] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.813717] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.813739] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.813760] pci_bus 0000:01: resource 1 [mem 0x70000000-0xdfffffff]
[ 0.813782] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
[ 0.813804] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
[ 0.813825] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
[ 0.813846] pci_bus 0000:02: resource 2 [mem 0x1c000000-0x1fffffff pref]
[ 0.813867] pci_bus 0000:02: resource 3 [mem 0x20000000-0x23ffffff]
[ 0.813889] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
[ 0.813909] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
[ 0.813931] pci_bus 0000:06: resource 2 [mem 0x24000000-0x27ffffff pref]
[ 0.813952] pci_bus 0000:06: resource 3 [mem 0x28000000-0x2bffffff]
[ 0.814282] NET: Registered protocol family 2
[ 0.815362] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.816017] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.816894] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.817202] TCP: reno registered
[ 0.817236] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.817312] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.817996] NET: Registered protocol family 1
[ 0.818107] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.818266] pci 0000:00:07.2: found PCI INT D -> IRQ 11
[ 0.818392] pci 0000:01:00.0: Boot video device
[ 0.818413] PCI: CLS 32 bytes, default 32
[ 0.818831] Unpacking initramfs...
[ 1.351292] Freeing initrd memory: 2940k freed
[ 1.376909] IBM machine detected. Enabling interrupts during APM calls.
[ 1.376944] apm: BIOS not found.
[ 1.378768] audit: initializing netlink socket (disabled)
[ 1.378869] type=2000 audit(1357623100.375:1): initialized
[ 1.456306] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.469632] VFS: Disk quotas dquot_6.5.2
[ 1.470155] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.471349] msgmni has been set to 808
[ 1.472909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.473145] io scheduler noop registered
[ 1.473160] io scheduler deadline registered
[ 1.473241] io scheduler cfq registered (default)
[ 1.474456] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[ 1.474471] vesafb: scrolling: redraw
[ 1.474491] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.475741] vesafb: framebuffer at 0xe0000000, mapped to 0xda800000, using 2304k, total 2304k
[ 1.562964] Console: switching to colour frame buffer device 128x48
[ 1.649186] fb0: VESA VGA frame buffer device
[ 1.649300] intel_idle: does not run on family 6 model 6
[ 1.649488] GHES: HEST is not enabled!
[ 1.649596] isapnp: Scanning for PnP cards...
[ 1.962801] isapnp: No Plug & Play device found
[ 1.963142] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.963546] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.965105] serial 00:03: [io 0x03e8-0x03ef]
[ 1.965270] serial 00:03: [io 0x02e8-0x02ef]
[ 1.965370] serial 00:03: unable to assign resources
[ 1.966235] serial: probe of 00:03 failed with error -16
[ 1.968618] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
[ 1.981778] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.982038] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.982810] mousedev: PS/2 mouse device common for all mice
[ 1.983547] rtc_cmos 00:11: RTC can wake from S4
[ 1.984178] rtc_cmos 00:11: rtc core: registered rtc_cmos as rtc0
[ 1.984245] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 1.984391] cpuidle: using governor ladder
[ 1.984407] cpuidle: using governor menu
[ 1.985466] drop_monitor: Initializing network drop monitor service
[ 1.986281] TCP: cubic registered
[ 1.987523] NET: Registered protocol family 10
[ 1.988965] NET: Registered protocol family 17
[ 1.989071] Key type dns_resolver registered
[ 1.989929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.991439] Using IPI No-Shortcut mode
[ 1.992165] PM: Hibernation image not present or could not be loaded.
[ 1.992247] registered taskstats version 1
[ 1.993234] rtc_cmos 00:11: setting system clock to 2013-01-08 05:31:41 UTC (1357623101)
[ 1.994003] Freeing unused kernel memory: 536k freed
[ 1.998614] Write protecting the kernel text: 3976k
[ 1.998781] Write protecting the kernel read-only data: 1180k
[ 2.076151] systemd-udevd[35]: starting version 196
[ 2.376812] tsc: Refined TSC clocksource calibration: 363.959 MHz
[ 2.376856] Switching to clocksource tsc
[ 2.660180] Floppy drive(s): fd0 is 1.44M
[ 2.675627] FDC 0 is a National Semiconductor PC87306
[ 2.846218] SCSI subsystem initialized
[ 2.846867] ACPI: bus type usb registered
[ 2.847139] usbcore: registered new interface driver usbfs
[ 2.847247] usbcore: registered new interface driver hub
[ 2.850735] usbcore: registered new device driver usb
[ 2.865842] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.866073] uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
[ 2.866196] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.866262] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 2.866376] uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400
[ 2.870937] hub 1-0:1.0: USB hub found
[ 2.870987] hub 1-0:1.0: 2 ports detected
[ 2.916340] ACPI: bus type scsi registered
[ 2.925593] libata version 3.00 loaded.
[ 2.928785] ata_piix 0000:00:07.1: version 2.13
[ 2.951632] scsi0 : ata_piix
[ 2.957437] scsi1 : ata_piix
[ 2.957913] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
[ 2.957935] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
[ 3.114144] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UD22, max UDMA/33
[ 3.117407] ata1.00: ATA-6: TOSHIBA MK4032GAX, AD101A, max UDMA/100
[ 3.117435] ata1.00: 78140160 sectors, multi 16: LBA48
[ 3.120653] ata2.00: configured for UDMA/33
[ 3.124030] ata1.00: configured for UDMA/33
[ 3.124974] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4032GA AD10 PQ: 0 ANSI: 5
[ 3.127443] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UD22 PQ: 0 ANSI: 5
[ 3.176936] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 3.243716] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 3.244277] sd 0:0:0:0: [sda] Write Protect is off
[ 3.244302] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.244530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.252164] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[ 3.252195] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.255158] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.316885] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 3.322292] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.340964] hub 1-1:1.0: USB hub found
[ 3.342614] hub 1-1:1.0: 4 ports detected
[ 3.621587] usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
[ 3.948499] usb 1-1.2: new low-speed USB device number 4 using uhci_hcd
[ 4.158834] usbcore: registered new interface driver usbhid
[ 4.158859] usbhid: USB HID core driver
[ 4.184432] input: MLK Silvercrest OM1008 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 4.192909] hid-generic 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Silvercrest OM1008] on usb-0000:00:07.2-1.2/input0
[ 4.408087] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.387222] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 5.436187] systemd[1]: Set hostname to <wishthinkpad.loc>.
[ 6.018181] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.018714] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.018876] systemd[1]: Starting Syslog Socket.
[ 6.019287] systemd[1]: Listening on Syslog Socket.
[ 6.019417] systemd[1]: Starting Remote File Systems.
[ 6.019547] systemd[1]: Reached target Remote File Systems.
[ 6.019670] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 6.019805] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.020214] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.020346] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.020607] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.020725] systemd[1]: Starting Encrypted Volumes.
[ 6.020855] systemd[1]: Reached target Encrypted Volumes.
[ 6.021185] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.022274] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.022458] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.022858] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.023723] systemd[1]: Starting udev Kernel Socket.
[ 6.024020] systemd[1]: Listening on udev Kernel Socket.
[ 6.024588] systemd[1]: Starting udev Control Socket.
[ 6.024899] systemd[1]: Listening on udev Control Socket.
[ 6.025066] systemd[1]: Expecting device dev-disk-by\x2duuid-0a64bde1\x2d82c3\x2d4cfb\x2dab68\x2d7178564d8ed5.device...
[ 6.025218] systemd[1]: Expecting device dev-disk-by\x2duuid-567947ca\x2dcba3\x2d42e4\x2d9677\x2de9ddeecd2c26.device...
[ 6.025358] systemd[1]: Expecting device dev-disk-by\x2duuid-e4eb21d7\x2d8ea8\x2d4059\x2db44b\x2d778690e44675.device...
[ 6.025517] systemd[1]: Starting Journal Socket.
[ 6.025993] systemd[1]: Listening on Journal Socket.
[ 6.026212] systemd[1]: Started File System Check on Root Device.
[ 6.026347] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.034598] systemd[1]: Starting Setup Virtual Console...
[ 6.044014] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.055201] systemd[1]: Mounting Debug File System...
[ 6.098496] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.098949] systemd[1]: Mounting Huge Pages File System...
[ 6.106869] systemd[1]: Starting udev Kernel Device Manager...
[ 6.142067] systemd[1]: Starting Apply Kernel Variables...
[ 6.167655] systemd[1]: Started Load Kernel Modules.
[ 6.167933] systemd[1]: Mounted FUSE Control File System.
[ 6.168090] systemd[1]: Mounted Configuration File System.
[ 6.168674] systemd[1]: Starting udev Coldplug all Devices...
[ 6.178256] systemd[1]: Starting Journal Service...
[ 6.254916] systemd[1]: Started Journal Service.
[ 6.255257] systemd[1]: Starting Syslog.
[ 6.255396] systemd[1]: Reached target Syslog.
[ 6.459181] systemd-udevd[82]: starting version 196
[ 6.601745] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.687281] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 8.693686] ACPI: Lid Switch [LID0]
[ 8.694288] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 8.703735] ACPI: Sleep Button [SLPB]
[ 8.708032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.710936] ACPI: Power Button [PWRF]
[ 8.742946] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.759509] Linux agpgart interface v0.103
[ 8.761831] tsc: Marking TSC unstable due to TSC halts in idle
[ 8.766111] Switching to clocksource acpi_pm
[ 8.777943] ACPI: acpi_idle registered with cpuidle
[ 8.790560] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
[ 8.792526] piix4_smbus: probe of 0000:00:07.3 failed with error -1
[ 8.810432] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:00eb]
[ 8.810495] yenta_cardbus 0000:00:02.0: Enabling burst memory read transactions
[ 8.810520] yenta_cardbus 0000:00:02.0: Using CSCINT to route CSC interrupts to PCI
[ 8.810537] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI
[ 8.810562] yenta_cardbus 0000:00:02.0: TI: mfunc 0xfba97543, devctl 0x62
[ 8.938642] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.938670] ACPI: Thermal Zone [THM0] (42 C)
[ 9.004501] ACPI: Fan [FN00] (off)
[ 9.005012] ACPI: Fan [FN01] (off)
[ 9.009048] thermal LNXTHERM:01: registered as thermal_zone1
[ 9.009073] ACPI: Thermal Zone [THM2] (20 C)
[ 9.009590] ACPI: Fan [FN20] (off)
[ 9.012203] ACPI: Fan [FN21] (off)
[ 9.013314] ACPI: Fan [FN60] (off)
[ 9.014648] ACPI: Fan [FN61] (off)
[ 9.040764] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0498, PCI irq 11
[ 9.040796] yenta_cardbus 0000:00:02.0: Socket status: 30000006
[ 9.062521] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:00eb]
[ 9.062591] yenta_cardbus 0000:00:02.1: Using CSCINT to route CSC interrupts to PCI
[ 9.062610] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI
[ 9.062634] yenta_cardbus 0000:00:02.1: TI: mfunc 0xfba97543, devctl 0x62
[ 9.079663] ACPI: Fan [FN70] (off)
[ 9.093343] thermal LNXTHERM:02: registered as thermal_zone2
[ 9.095023] ACPI: Thermal Zone [THM6] (27 C)
[ 9.096320] ACPI: Fan [FN71] (off)
[ 9.102380] thermal LNXTHERM:03: registered as thermal_zone3
[ 9.102406] ACPI: Thermal Zone [THM7] (27 C)
[ 9.290735] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0498, PCI irq 11
[ 9.290767] yenta_cardbus 0000:00:02.1: Socket status: 30000006
[ 9.298222] psmouse serio1: hgpk: ID: 10 00 64
[ 9.319131] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.321961] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 9.383513] gameport gameport0: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 685kHz
[ 9.449433] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x40000000
[ 9.572098] parport_pc 00:04: reported by Plug and Play ACPI
[ 9.572186] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 9.621417] NET: Registered protocol family 23
[ 9.702875] nsc-ircc, chip->init
[ 9.702902] nsc-ircc, Found chip at base=0x02e
[ 9.702942] nsc-ircc, driver loaded (Dag Brattli)
[ 9.703038] nsc_ircc_open(), can't get iobase of 0x3f8
[ 9.703089] nsc-ircc, Found chip at base=0x02e
[ 9.703128] nsc-ircc, driver loaded (Dag Brattli)
[ 9.703173] nsc_ircc_open(), can't get iobase of 0x3f8
[ 9.710755] nsc-ircc 00:05: disabled
[ 9.829100] microcode: CPU0 sig=0x66a, pf=0x8, revision=0xa
[ 9.840431] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3
[ 9.871890] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 10.413153] ppdev: user-space parallel port driver
[ 10.512439] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.681703] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 10.682361] excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
[ 10.683119] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 10.687638] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[ 10.688295] excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
[ 10.689052] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[ 10.689327] excluding 0x3f0-0x3ff 0x4c0-0x4c7 0x4d0-0x4d7
[ 10.689737] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[ 10.693574] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 10.694068] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 10.694336] excluding 0x850-0x857
[ 10.694666] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 10.695138] clean.
[ 10.695329] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 10.695361] excluding 0xc0000-0xcbfff 0xf0000-0xfffff
[ 10.695577] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 10.695647] excluding 0xa0000000-0xa0ffffff
[ 10.695820] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 10.695902] clean.
[ 10.696062] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 10.696552] clean.
[ 10.699553] clean.
[ 10.703678] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[ 10.704168] clean.
[ 10.704390] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 10.704423] excluding 0xc0000-0xcbfff 0xf0000-0xfffff
[ 10.704641] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 10.704711] excluding 0xa0000000-0xa0ffffff
[ 10.704884] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 10.704966] clean.
[ 10.705127] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[ 10.705615] clean.
[ 11.538531] AddingHi Dude.
I will try what You have suggested.
Which channel do You "recommend"?
My router is set to G-only as the card is G-only, I have been using channel 1 but I will change it to 11 and see what happens.
I was using WPA2-Personal with AES but I will change it to WPA2-Mixed (AES + TKIP) and see if that changes anything.
I was hoping that the upgrade of the linux-firmware (linux-firmware-20130610-1) that I have found in the repo today fixes the issue.
Installed it and typed in:
[root@wishthinkpad andrzejl]# iwconfig wlan0 rate 54M fixed
[root@wishthinkpad andrzejl]# ping go
and I have lost connection before I could even type in "ping google.com"...
Edit: Changing router's settings got me nowhere so far Dude:
[andrzejl@wishmacer ~]$ ssh_ibm
Last login: Fri Jun 14 16:08:17 2013 from acer.loc
[andrzejl@wishthinkpad ~]$ su
Password:
[root@wishthinkpad andrzejl]# ping google.com
PING google.com (74.125.24.102) 56(84) bytes of data.
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=1 ttl=47 time=81.5 ms
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=2 ttl=47 time=79.9 ms
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=3 ttl=47 time=85.4 ms
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=4 ttl=47 time=81.6 ms
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=5 ttl=47 time=81.7 ms
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=6 ttl=47 time=94.1 ms
64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=7 ttl=47 time=77.0 ms
^C
--- google.com ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 6002ms
rtt min/avg/max/mdev = 77.097/83.085/94.145/5.084 ms
[root@wishthinkpad andrzejl]# iwconfig
wlan0 IEEE 802.11bg ESSID:"Arch_Linux_User"
Mode:Managed Frequency:2.462 GHz Access Point: 00:18:39:A0:DB:3E
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=60/70 Signal level=-50 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:132 Missed beacon:0
lo no wireless extensions.
[root@wishthinkpad andrzejl]# iwconfig wlan0 rate 54M fixed
[root@wishthinkpad andrzejl]# ping google.com
PING google.com (74.125.24.101) 56(84) bytes of data.
64 bytes from de-in-f101.1e100.net (74.125.24.101): icmp_seq=4 ttl=47 time=34.1 ms
64 bytes from de-in-f101.1e100.net (74.125.24.101): icmp_seq=8 ttl=47 time=70.3 ms
64 bytes from de-in-f101.1e100.net (74.125.24.101): icmp_seq=9 ttl=47 time=163 ms
^C64 bytes from 74.125.24.101: icmp_seq=13 ttl=47 time=39.7 ms
--- google.com ping statistics ---
13 packets transmitted, 4 received, 69% packet loss, time 30364ms
rtt min/avg/max/mdev = 34.139/76.870/163.269/51.752 ms
[root@wishthinkpad andrzejl]#
Here is the log (journalctl -b | grep wlan > dump_wlan) for the entire boot:
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen normally on 3 wlan0 192.168.0.102 UDP 123
Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticate with 00:18:39:a0:db:3e
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: send auth to 00:18:39:a0:db:3e (try 1/3)
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticated
Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associate with 00:18:39:a0:db:3e (try 1/3)
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: RX AssocResp from 00:18:39:a0:db:3e (capab=0x411 status=0 aid=1)
Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associated
Here is the log (journalctl -b > dump) for the entire boot:
-- Logs begin at Sat 2013-01-05 05:42:53 GMT, end at Fri 2013-06-14 16:23:56 IST. --
Jun 14 16:13:03 wishthinkpad.loc systemd-journal[90]: Allowing runtime journal files to grow to 20.2M.
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys cpuset
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys cpu
Jun 14 16:13:03 wishthinkpad.loc kernel: Linux version 3.9.5-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 10:10:57 CEST 2013
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: BIOS-provided physical RAM map:
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000019fcffff] usable
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000019fd0000-0x0000000019fdefff] ACPI data
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000019fdf000-0x0000000019fdffff] ACPI NVS
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000019fe0000-0x0000000019ffffff] reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: Malformed early option 'apic'
Jun 14 16:13:03 wishthinkpad.loc kernel: Malformed early option 'apic'
Jun 14 16:13:03 wishthinkpad.loc kernel: Notice: NX (Execute Disable) protection missing in CPU!
Jun 14 16:13:03 wishthinkpad.loc kernel: SMBIOS 2.2 present.
Jun 14 16:13:03 wishthinkpad.loc kernel: DMI: IBM 26458A0/26458A0, BIOS INET24WW 05/24/1999
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: last_pfn = 0x19fd0 max_arch_pfn = 0x100000
Jun 14 16:13:03 wishthinkpad.loc kernel: MTRR default type: uncachable
Jun 14 16:13:03 wishthinkpad.loc kernel: MTRR fixed ranges enabled:
Jun 14 16:13:03 wishthinkpad.loc kernel: 00000-9FFFF write-back
Jun 14 16:13:03 wishthinkpad.loc kernel: A0000-BFFFF uncachable
Jun 14 16:13:03 wishthinkpad.loc kernel: C0000-CBFFF write-protect
Jun 14 16:13:03 wishthinkpad.loc kernel: CC000-EFFFF uncachable
Jun 14 16:13:03 wishthinkpad.loc kernel: F0000-FFFFF write-protect
Jun 14 16:13:03 wishthinkpad.loc kernel: MTRR variable ranges enabled:
Jun 14 16:13:03 wishthinkpad.loc kernel: 0 base 000000000 mask FF0000000 write-back
Jun 14 16:13:03 wishthinkpad.loc kernel: 1 base 010000000 mask FF8000000 write-back
Jun 14 16:13:03 wishthinkpad.loc kernel: 2 base 018000000 mask FFE000000 write-back
Jun 14 16:13:03 wishthinkpad.loc kernel: 3 disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: 4 disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: 5 disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: 6 disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: 7 disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: PAT not supported by CPU.
Jun 14 16:13:03 wishthinkpad.loc kernel: Scanning 1 areas for low memory corruption
Jun 14 16:13:03 wishthinkpad.loc kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x00000000-0x000fffff] page 4k
Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x19800000-0x19bfffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x19800000-0x19bfffff] page 2M
Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x18000000-0x197fffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x18000000-0x197fffff] page 2M
Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x00100000-0x17ffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x00100000-0x003fffff] page 4k
Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x00400000-0x17ffffff] page 2M
Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x19c00000-0x19fcffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x19c00000-0x19fcffff] page 4k
Jun 14 16:13:03 wishthinkpad.loc kernel: BRK [0x01742000, 0x01742fff] PGTABLE
Jun 14 16:13:03 wishthinkpad.loc kernel: RAMDISK: [mem 0x18af1000-0x18eddfff]
Jun 14 16:13:03 wishthinkpad.loc kernel: IBM Thinkpad 600 Series 2645 detected: force use of acpi=noirq
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: RSDP 000fd6e0 00014 (v00 IBM )
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: RSDT 19fd0000 00028 (v01 IBM TP600R 00000001 00000000)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: FACP 19fd0100 00074 (v01 IBM TP600R 00000001 00000000)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: DSDT 19fd0200 0B501 (v01 IBM TP600R 0000001D MSFT 0100000B)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: FACS 19fdf000 00040
Jun 14 16:13:03 wishthinkpad.loc kernel: 0MB HIGHMEM available.
Jun 14 16:13:03 wishthinkpad.loc kernel: 415MB LOWMEM available.
Jun 14 16:13:03 wishthinkpad.loc kernel: mapped low ram: 0 - 19fd0000
Jun 14 16:13:03 wishthinkpad.loc kernel: low ram: 0 - 19fd0000
Jun 14 16:13:03 wishthinkpad.loc kernel: BRK [0x01743000, 0x01743fff] PGTABLE
Jun 14 16:13:03 wishthinkpad.loc kernel: Zone ranges:
Jun 14 16:13:03 wishthinkpad.loc kernel: DMA [mem 0x00001000-0x00ffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: Normal [mem 0x01000000-0x19fcffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: HighMem empty
Jun 14 16:13:03 wishthinkpad.loc kernel: Movable zone start for each node
Jun 14 16:13:03 wishthinkpad.loc kernel: Early memory node ranges
Jun 14 16:13:03 wishthinkpad.loc kernel: node 0: [mem 0x00001000-0x0009efff]
Jun 14 16:13:03 wishthinkpad.loc kernel: node 0: [mem 0x00100000-0x19fcffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: On node 0 totalpages: 106350
Jun 14 16:13:03 wishthinkpad.loc kernel: free_area_init_node: node 0, pgdat c15aeb00, node_mem_map d9c90020
Jun 14 16:13:03 wishthinkpad.loc kernel: DMA zone: 32 pages used for memmap
Jun 14 16:13:03 wishthinkpad.loc kernel: DMA zone: 0 pages reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: DMA zone: 3998 pages, LIFO batch:0
Jun 14 16:13:03 wishthinkpad.loc kernel: Normal zone: 800 pages used for memmap
Jun 14 16:13:03 wishthinkpad.loc kernel: Normal zone: 102352 pages, LIFO batch:31
Jun 14 16:13:03 wishthinkpad.loc kernel: Using APIC driver default
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: PM-Timer IO Port: 0xef08
Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Jun 14 16:13:03 wishthinkpad.loc kernel: Local APIC disabled by BIOS -- reenabling.
Jun 14 16:13:03 wishthinkpad.loc kernel: Could not enable APIC!
Jun 14 16:13:03 wishthinkpad.loc kernel: APIC: disable apic facility
Jun 14 16:13:03 wishthinkpad.loc kernel: APIC: switched to apic NOOP
Jun 14 16:13:03 wishthinkpad.loc kernel: nr_irqs_gsi: 16
Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: [mem 0x1a000000-0xfffdffff] available for PCI devices
Jun 14 16:13:03 wishthinkpad.loc kernel: Booting paravirtualized kernel on bare hardware
Jun 14 16:13:03 wishthinkpad.loc kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Jun 14 16:13:03 wishthinkpad.loc kernel: PERCPU: Embedded 14 pages/cpu @d9c7e000 s33280 r0 d24064 u57344
Jun 14 16:13:03 wishthinkpad.loc kernel: pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
Jun 14 16:13:03 wishthinkpad.loc kernel: pcpu-alloc: [0] 0
Jun 14 16:13:03 wishthinkpad.loc kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105518
Jun 14 16:13:03 wishthinkpad.loc kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=350fa8e9-36fb-4927-abaf-91f4b958a679 ro quiet pci=noacpi lapic apic acpi=noirq apm=on pci=use_crs
Jun 14 16:13:03 wishthinkpad.loc kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: __ex_table already sorted, skipping sort
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing CPU#0
Jun 14 16:13:03 wishthinkpad.loc kernel: allocated 851576 bytes of page_cgroup
Jun 14 16:13:03 wishthinkpad.loc kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing HighMem for node 0 (00000000:00000000)
Jun 14 16:13:03 wishthinkpad.loc kernel: Memory: 409236k/425792k available (4177k kernel code, 16164k reserved, 1706k data, 572k init, 0k highmem)
Jun 14 16:13:03 wishthinkpad.loc kernel: [379B blob data]
Jun 14 16:13:03 wishthinkpad.loc kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jun 14 16:13:03 wishthinkpad.loc kernel: SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jun 14 16:13:03 wishthinkpad.loc kernel: Preemptible hierarchical RCU implementation.
Jun 14 16:13:03 wishthinkpad.loc kernel: RCU dyntick-idle grace-period acceleration is enabled.
Jun 14 16:13:03 wishthinkpad.loc kernel: Dump stacks of tasks blocking RCU-preempt GP.
Jun 14 16:13:03 wishthinkpad.loc kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
Jun 14 16:13:03 wishthinkpad.loc kernel: NR_IRQS:2304 nr_irqs:256 16
Jun 14 16:13:03 wishthinkpad.loc kernel: CPU 0 irqstacks, hard=d9406000 soft=d9408000
Jun 14 16:13:03 wishthinkpad.loc kernel: Console: colour dummy device 80x25
Jun 14 16:13:03 wishthinkpad.loc kernel: console [tty0] enabled
Jun 14 16:13:03 wishthinkpad.loc kernel: tsc: Fast TSC calibration using PIT
Jun 14 16:13:03 wishthinkpad.loc kernel: tsc: Detected 363.989 MHz processor
Jun 14 16:13:03 wishthinkpad.loc kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 728.31 BogoMIPS (lpj=1213296)
Jun 14 16:13:03 wishthinkpad.loc kernel: pid_max: default: 32768 minimum: 301
Jun 14 16:13:03 wishthinkpad.loc kernel: Security Framework initialized
Jun 14 16:13:03 wishthinkpad.loc kernel: AppArmor: AppArmor disabled by boot time parameter
Jun 14 16:13:03 wishthinkpad.loc kernel: Mount-cache hash table entries: 512
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys cpuacct
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys memory
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys devices
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys freezer
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys net_cls
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys blkio
Jun 14 16:13:03 wishthinkpad.loc kernel: mce: CPU supports 5 MCE banks
Jun 14 16:13:03 wishthinkpad.loc kernel: [113B blob data]
Jun 14 16:13:03 wishthinkpad.loc kernel: Freeing SMP alternatives: 16k freed
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Core revision 20130117
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: All ACPI Tables successfully acquired
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: setting ELCR to 0a00 (from 0800)
Jun 14 16:13:03 wishthinkpad.loc kernel: ftrace: allocating 18428 entries in 36 pages
Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: weird, boot CPU (#0) not listed by the BIOS
Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: SMP motherboard not detected
Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: Local APIC not detected. Using dummy APIC emulation.
Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: SMP disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: Performance Events:
Jun 14 16:13:03 wishthinkpad.loc kernel: no APIC, boot with the "lapic" boot parameter to force-enable it.
Jun 14 16:13:03 wishthinkpad.loc kernel: no hardware sampling interrupt available.
Jun 14 16:13:03 wishthinkpad.loc kernel: p6 PMU driver.
Jun 14 16:13:03 wishthinkpad.loc kernel: ... version: 0
Jun 14 16:13:03 wishthinkpad.loc kernel: ... bit width: 32
Jun 14 16:13:03 wishthinkpad.loc kernel: ... generic registers: 2
Jun 14 16:13:03 wishthinkpad.loc kernel: ... value mask: 00000000ffffffff
Jun 14 16:13:03 wishthinkpad.loc kernel: ... max period: 000000007fffffff
Jun 14 16:13:03 wishthinkpad.loc kernel: ... fixed-purpose events: 0
Jun 14 16:13:03 wishthinkpad.loc kernel: ... event mask: 0000000000000003
Jun 14 16:13:03 wishthinkpad.loc kernel: Brought up 1 CPUs
Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: Total of 1 processors activated (728.31 BogoMIPS)
Jun 14 16:13:03 wishthinkpad.loc kernel: NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
Jun 14 16:13:03 wishthinkpad.loc kernel: devtmpfs: initialized
Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registering ACPI NVS region [mem 0x19fdf000-0x19fdffff] (4096 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: RTC time: 15:12:55, date: 06/14/13
Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 16
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type PCI registered
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: Using configuration type 1 for base access
Jun 14 16:13:03 wishthinkpad.loc kernel: bio: create slab <bio-0> at 0
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(Module Device)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(Processor Device)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: EC: Look up EC in DSDT
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Interpreter enabled
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: (supports S0 S1 S2 S3 S4 S5)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Using PIC for interrupt routing
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PVID] (on)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PSIO] (on)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PRSD] (off)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PFN0] (off)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PFN1] (off)
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PDCK] (on)
Jun 14 16:13:03 wishthinkpad.loc kernel: acpi root: \_SB_.PCI0 notify handler is installed
Jun 14 16:13:03 wishthinkpad.loc kernel: Found 1 acpi root devices
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
Jun 14 16:13:03 wishthinkpad.loc kernel: vgaarb: loaded
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: Probing PCI hardware
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: root bus 00: using default resources
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: Probing PCI hardware (bus 00)
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI host bridge to bus 0000:00
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:00.0: reg 10: [mem 0x40000000-0x43ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: [104c:ac1d] type 02 class 0x060700
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: reg 10: [mem 0x50102000-0x50102fff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: supports D1 D2
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: [104c:ac1d] type 02 class 0x060700
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: reg 10: [mem 0x50101000-0x50101fff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: supports D1 D2
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:06.0: [1013:6001] type 00 class 0x040100
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:06.0: reg 10: [mem 0x50100000-0x50100fff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:06.0: reg 14: [mem 0x50000000-0x500fffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.0: [8086:7110] type 00 class 0x068000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.1: reg 20: [io 0xfcf0-0xfcff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.2: reg 20: [io 0x8400-0x841f]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
Jun 14 16:13:03 wishthinkpad.loc kernel: [131B blob data]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: quirk: [io 0xef00-0xef3f] claimed by PIIX4 ACPI
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: quirk: [io 0xefa0-0xefaf] claimed by PIIX4 SMB
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres B PIO at 02f8-02ff
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres E PIO at 0538-053f
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres G PIO at 0130-013f
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres I PIO at 002e-002f
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: [10c8:0005] type 00 class 0x030000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: reg 14: [mem 0x70000000-0x703fffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: reg 18: [mem 0x70400000-0x704fffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: supports D1 D2
Jun 14 16:13:03 wishthinkpad.loc kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: pci_cache_line_size set to 32 bytes
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: e820: reserve RAM buffer [mem 0x19fd0000-0x1bffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: Initializing
Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: domain hash size = 128
Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: unlabeled traffic allowed by default
Jun 14 16:13:03 wishthinkpad.loc kernel: Switching to clocksource pit
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp: PnP ACPI init
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type PNP registered
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x000c0000-0x000cbfff] could not be reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x00100000-0x19ffffff] could not be reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0xfffe0000-0xffffffff] has been reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:02: [dma 2]
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (disabled)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:05: [dma 3]
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:06: Plug and Play ACPI device, IDs CSC0110 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:07: [dma 1]
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:07: [dma 0]
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:07: Plug and Play ACPI device, IDs CSC0100 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:08: Plug and Play ACPI device, IDs CSC0101 PNPb02f (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:09: Plug and Play ACPI device, IDs CSC0103 (disabled)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0a: [dma 7]
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0a: Plug and Play ACPI device, IDs IBM3765 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0b: [dma 4]
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0200 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0800 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: [io 0x15e0-0x15ef] has been reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: [io 0xef00-0xef3f] has been reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: [io 0xefa0-0xefaf] has been reserved
Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0e: Plug and Play ACPI device, IDs PNP0c04 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0f: Plug and Play ACPI device, IDs PNP0303 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:10: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:11: Plug and Play ACPI device, IDs PNP0b00 (active)
Jun 14 16:13:03 wishthinkpad.loc kernel: pnp: PnP ACPI: found 18 devices
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type PNP unregistered
Jun 14 16:13:03 wishthinkpad.loc kernel: Switching to clocksource acpi_pm
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 16: assigned [mem 0x28000000-0x2bffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x10ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 14: assigned [io 0x1400-0x14ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 13: assigned [io 0x1800-0x18ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 14: assigned [io 0x1c00-0x1cff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: CardBus bridge to [bus 02-05]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [io 0x1000-0x10ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [io 0x1400-0x14ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [mem 0x1c000000-0x1fffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [mem 0x20000000-0x23ffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: CardBus bridge to [bus 06-09]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [io 0x1800-0x18ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [io 0x1c00-0x1cff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [mem 0x24000000-0x27ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [mem 0x28000000-0x2bffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: setting IRQ 11 as level-triggered
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: found PCI INT A -> IRQ 11
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: found PCI INT B -> IRQ 11
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:01: resource 1 [mem 0x70000000-0xdfffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 2 [mem 0x1c000000-0x1fffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 3 [mem 0x20000000-0x23ffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 2 [mem 0x24000000-0x27ffffff pref]
Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 3 [mem 0x28000000-0x2bffffff]
Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 2
Jun 14 16:13:03 wishthinkpad.loc kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jun 14 16:13:03 wishthinkpad.loc kernel: TCP: reno registered
Jun 14 16:13:03 wishthinkpad.loc kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 1
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.2: found PCI INT D -> IRQ 11
Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: Boot video device
Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: CLS 32 bytes, default 32
Jun 14 16:13:03 wishthinkpad.loc kernel: Unpacking initramfs...
Jun 14 16:13:03 wishthinkpad.loc kernel: Freeing initrd memory: 4020k freed
Jun 14 16:13:03 wishthinkpad.loc kernel: IBM machine detected. Enabling interrupts during APM calls.
Jun 14 16:13:03 wishthinkpad.loc kernel: apm: BIOS not found.
Jun 14 16:13:03 wishthinkpad.loc kernel: Scanning for low memory corruption every 60 seconds
Jun 14 16:13:03 wishthinkpad.loc kernel: audit: initializing netlink socket (disabled)
Jun 14 16:13:03 wishthinkpad.loc kernel: type=2000 audit(1371222775.660:1): initialized
Jun 14 16:13:03 wishthinkpad.loc kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Jun 14 16:13:03 wishthinkpad.loc kernel: VFS: Disk quotas dquot_6.5.2
Jun 14 16:13:03 wishthinkpad.loc kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 14 16:13:03 wishthinkpad.loc kernel: msgmni has been set to 807
Jun 14 16:13:03 wishthinkpad.loc kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jun 14 16:13:03 wishthinkpad.loc kernel: io scheduler noop registered
Jun 14 16:13:03 wishthinkpad.loc kernel: io scheduler deadline registered
Jun 14 16:13:03 wishthinkpad.loc kernel: io scheduler cfq registered (default)
Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: mode is 1024x768x24, linelength=3072, pages=0
Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: scrolling: redraw
Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xda800000, using 2304k, total 2304k
Jun 14 16:13:03 wishthinkpad.loc kernel: Console: switching to colour frame buffer device 128x48
Jun 14 16:13:03 wishthinkpad.loc kernel: fb0: VESA VGA frame buffer device
Jun 14 16:13:03 wishthinkpad.loc kernel: intel_idle: does not run on family 6 model 6
Jun 14 16:13:03 wishthinkpad.loc kernel: GHES: HEST is not enabled!
Jun 14 16:13:03 wishthinkpad.loc kernel: isapnp: Scanning for PnP cards...
Jun 14 16:13:03 wishthinkpad.loc kernel: isapnp: No Plug & Play device found
Jun 14 16:13:03 wishthinkpad.loc kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jun 14 16:13:03 wishthinkpad.loc kernel: serial 00:03: [io 0x03e8-0x03ef]
Jun 14 16:13:03 wishthinkpad.loc kernel: serial 00:03: [io 0x02e8-0x02ef]
Jun 14 16:13:03 wishthinkpad.loc kernel: serial 00:03: unable to assign resources
Jun 14 16:13:03 wishthinkpad.loc kernel: serial: probe of 00:03 failed with error -16
Jun 14 16:13:03 wishthinkpad.loc kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
Jun 14 16:13:03 wishthinkpad.loc kernel: i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
Jun 14 16:13:03 wishthinkpad.loc kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 14 16:13:03 wishthinkpad.loc kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 14 16:13:03 wishthinkpad.loc kernel: mousedev: PS/2 mouse device common for all mice
Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: RTC can wake from S4
Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: rtc core: registered rtc_cmos as rtc0
Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: alarms up to one month, y3k, 242 bytes nvram
Jun 14 16:13:03 wishthinkpad.loc kernel: cpuidle: using governor ladder
Jun 14 16:13:03 wishthinkpad.loc kernel: cpuidle: using governor menu
Jun 14 16:13:03 wishthinkpad.loc kernel: EFI Variables Facility v0.08 2004-May-17
Jun 14 16:13:03 wishthinkpad.loc kernel: drop_monitor: Initializing network drop monitor service
Jun 14 16:13:03 wishthinkpad.loc kernel: TCP: cubic registered
Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 10
Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 17
Jun 14 16:13:03 wishthinkpad.loc kernel: Key type dns_resolver registered
Jun 14 16:13:03 wishthinkpad.loc kernel: Using IPI No-Shortcut mode
Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Hibernation image not present or could not be loaded.
Jun 14 16:13:03 wishthinkpad.loc kernel: registered taskstats version 1
Jun 14 16:13:03 wishthinkpad.loc kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jun 14 16:13:03 wishthinkpad.loc kernel: Magic number: 1:809:234
Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: setting system clock to 2013-06-14 15:12:57 UTC (1371222777)
Jun 14 16:13:03 wishthinkpad.loc kernel: Freeing unused kernel memory: 572k freed
Jun 14 16:13:03 wishthinkpad.loc kernel: Write protecting the kernel text: 4180k
Jun 14 16:13:03 wishthinkpad.loc kernel: Write protecting the kernel read-only data: 1300k
Jun 14 16:13:03 wishthinkpad.loc systemd-udevd[37]: starting version 204
Jun 14 16:13:03 wishthinkpad.loc kernel: tsc: Refined TSC clocksource calibration: 363.959 MHz
Jun 14 16:13:03 wishthinkpad.loc kernel: Switching to clocksource tsc
Jun 14 16:13:03 wishthinkpad.loc kernel: Floppy drive(s): fd0 is 1.44M
Jun 14 16:13:03 wishthinkpad.loc kernel: FDC 0 is a National Semiconductor PC87306
Jun 14 16:13:03 wishthinkpad.loc kernel: SCSI subsystem initialized
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type USB registered
Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver usbfs
Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver hub
Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new device driver usb
Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400
Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-0:1.0: USB hub found
Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-0:1.0: 2 ports detected
Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type ATA registered
Jun 14 16:13:03 wishthinkpad.loc kernel: libata version 3.00 loaded.
Jun 14 16:13:03 wishthinkpad.loc kernel: ata_piix 0000:00:07.1: version 2.13
Jun 14 16:13:03 wishthinkpad.loc kernel: scsi0 : ata_piix
Jun 14 16:13:03 wishthinkpad.loc kernel: scsi1 : ata_piix
Jun 14 16:13:03 wishthinkpad.loc kernel: ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
Jun 14 16:13:03 wishthinkpad.loc kernel: ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
Jun 14 16:13:03 wishthinkpad.loc kernel: ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UD22, max UDMA/33
Jun 14 16:13:03 wishthinkpad.loc kernel: ata1.00: ATA-6: TOSHIBA MK4032GAX, AD101A, max UDMA/100
Jun 14 16:13:03 wishthinkpad.loc kernel: ata1.00: 78140160 sectors, multi 16: LBA48
Jun 14 16:13:03 wishthinkpad.loc kernel: ata2.00: configured for UDMA/33
Jun 14 16:13:03 wishthinkpad.loc kernel: ata1.00: configured for UDMA/33
Jun 14 16:13:03 wishthinkpad.loc kernel: scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4032GA AD10 PQ: 0 ANSI: 5
Jun 14 16:13:03 wishthinkpad.loc kernel: scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UD22 PQ: 0 ANSI: 5
Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1: new full-speed USB device number 2 using uhci_hcd
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 14 16:13:03 wishthinkpad.loc kernel: sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
Jun 14 16:13:03 wishthinkpad.loc kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jun 14 16:13:03 wishthinkpad.loc kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jun 14 16:13:03 wishthinkpad.loc kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-1:1.0: USB hub found
Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-1:1.0: 4 ports detected
Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.2: new low-speed USB device number 4 using uhci_hcd
Jun 14 16:13:03 wishthinkpad.loc kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver usbhid
Jun 14 16:13:03 wishthinkpad.loc kernel: usbhid: USB HID core driver
Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.4: new full-speed USB device number 5 using uhci_hcd
Jun 14 16:13:03 wishthinkpad.loc kernel: input: MLK Silvercrest OM1008 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
Jun 14 16:13:03 wishthinkpad.loc kernel: hid-generic 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Silvercrest OM1008] on usb-0000:00:07.2-1.2/input0
Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.4: Parent hub missing LPM exit latency info. Power management will be impacted.
Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing USB Mass Storage driver...
Jun 14 16:13:03 wishthinkpad.loc kernel: scsi2 : usb-storage 1-1.4:1.0
Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver usb-storage
Jun 14 16:13:03 wishthinkpad.loc kernel: USB Mass Storage support registered.
Jun 14 16:13:03 wishthinkpad.loc kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jun 14 16:13:03 wishthinkpad.loc kernel: scsi 2:0:0:0: Direct-Access Corsair Voyager GT 3.0 1.00 PQ: 0 ANSI: 4
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] 31334400 512-byte logical blocks: (16.0 GB/14.9 GiB)
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Write Protect is off
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Mode Sense: bf 00 00 00
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jun 14 16:13:03 wishthinkpad.loc kernel: sdb: sdb1
Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Set hostname to <wishthinkpad.loc>.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Cannot add dependency job for unit syslog-ng.service, ignoring: Unit syslog-ng.service failed to load: No such file or directory. See system logs and 'systemctl status syslog-ng.service' for details.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Remote File Systems.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Reached target Remote File Systems.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Delayed Shutdown Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on Delayed Shutdown Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Device-mapper event daemon FIFOs.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting LVM2 metadata daemon socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on LVM2 metadata daemon socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Encrypted Volumes.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Reached target Encrypted Volumes.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Paths.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Reached target Paths.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Kernel Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on udev Kernel Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Control Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on udev Control Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Journal Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on Journal Socket.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting Huge Pages File System...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Create static device nodes in /dev...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Apply Kernel Variables...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Load Kernel Modules.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted FUSE Control File System.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting Configuration File System...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Coldplug all Devices...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Journal Service...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Journal Service.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Set Up Additional Binary Formats.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting Debug File System...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting POSIX Message Queue File System...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Setup Virtual Console...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device dev-disk-by\x2duuid-0a64bde1\x2d82c3\x2d4cfb\x2dab68\x2d7178564d8ed5.device...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started File System Check on Root Device.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Remount Root and Kernel File Systems...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device dev-disk-by\x2duuid-567947ca\x2dcba3\x2d42e4\x2d9677\x2de9ddeecd2c26.device...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device dev-disk-by\x2duuid-e4eb21d7\x2d8ea8\x2d4059\x2db44b\x2d778690e44675.device...
Jun 14 16:13:03 wishthinkpad.loc kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
Jun 14 16:13:03 wishthinkpad.loc systemd-udevd[99]: starting version 204
Jun 14 16:13:03 wishthinkpad.loc systemd-journal[90]: Journal started
Jun 14 16:13:03 wishthinkpad.loc systemd-sysctl[87]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Apply Kernel Variables.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started udev Coldplug all Devices.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Create static device nodes in /dev.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Kernel Device Manager...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted Huge Pages File System.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted POSIX Message Queue File System.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted Debug File System.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted Configuration File System.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Remount Root and Kernel File Systems.
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Load Random Seed...
Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted /tmp.
Jun 14 16:13:04 wishthinkpad.loc systemd[1]: Started Load Random Seed.
Jun 14 16:13:04 wishthinkpad.loc systemd[1]: Started Setup Virtual Console.
Jun 14 16:13:05 wishthinkpad.loc kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: Lid Switch [LID0]
Jun 14 16:13:05 wishthinkpad.loc kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: Sleep Button [SLPB]
Jun 14 16:13:05 wishthinkpad.loc kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: Power Button [PWRF]
Jun 14 16:13:05 wishthinkpad.loc kernel: Linux agpgart interface v0.103
Jun 14 16:13:05 wishthinkpad.loc kernel: tsc: Marking TSC unstable due to TSC halts in idle
Jun 14 16:13:05 wishthinkpad.loc kernel: Switching to clocksource acpi_pm
Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: acpi_idle registered with cpuidle
Jun 14 16:13:05 wishthinkpad.loc kernel: piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
Jun 14 16:13:05 wishthinkpad.loc kernel: piix4_smbus: probe of 0000:00:07.3 failed with error -1
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:00eb]
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Enabling burst memory read transactions
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Using CSCINT to route CSC interrupts to PCI
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: TI: mfunc 0xfba97543, devctl 0x62
Jun 14 16:13:06 wishthinkpad.loc kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 14 16:13:06 wishthinkpad.loc kernel: gameport gameport0: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 685kHz
Jun 14 16:13:06 wishthinkpad.loc kernel: parport_pc 00:04: reported by Plug and Play ACPI
Jun 14 16:13:06 wishthinkpad.loc kernel: parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Jun 14 16:13:06 wishthinkpad.loc kernel: NET: Registered protocol family 23
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: AC Adapter [AC] (on-line)
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0418, PCI irq 11
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Socket status: 30000006
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, chip->init
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, Found chip at base=0x02e
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, driver loaded (Dag Brattli)
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc_ircc_open(), can't get iobase of 0x3f8
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, Found chip at base=0x02e
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, driver loaded (Dag Brattli)
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc_ircc_open(), can't get iobase of 0x3f8
Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc 00:05: disabled
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:00eb]
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: Using CSCINT to route CSC interrupts to PCI
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI
Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: TI: mfunc 0xfba97543, devctl 0x62
Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:00: registered as thermal_zone0
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM0] (77 C)
Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:01: registered as thermal_zone1
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM2] (35 C)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN00] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN01] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN20] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN21] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN60] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN61] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN70] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN71] (off)
Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:02: registered as thermal_zone2
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM6] (27 C)
Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:03: registered as thermal_zone3
Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM7] (27 C)
Jun 14 16:13:06 wishthinkpad.loc systemd[1]: Starting Sound Card.
Jun 14 16:13:06 wishthinkpad.loc systemd[1]: Reached target Sound Card.
Jun 14 16:13:07 wishthinkpad.loc kernel: cfg80211: Calling CRDA to update world regulatory domain
Jun 14 16:13:07 wishthinkpad.loc kernel: microcode: CPU0 sig=0x66a, pf=0x8, revision=0xa
Jun 14 16:13:07 wishthinkpad.loc kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Jun 14 16:13:07 wishthinkpad.loc kernel: psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Jun 14 16:13:07 wishthinkpad.loc kernel: psmouse serio1: hgpk: ID: 10 00 64
Jun 14 16:13:08 wishthinkpad.loc kernel: psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3
Jun 14 16:13:08 wishthinkpad.loc kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
Jun 14 16:13:08 wishthinkpad.loc kernel: usb 1-1.1: reset full-speed USB device number 3 using uhci_hcd
Jun 14 16:13:08 wishthinkpad.loc systemd[1]: Found device TOSHIBA_MK4032GAX.
Jun 14 16:13:08 wishthinkpad.loc systemd[1]: Starting File System Check on /dev/disk/by-uuid/567947ca-cba3-42e4-9677-e9ddeecd2c26...
Jun 14 16:13:09 wishthinkpad.loc kernel: phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a.
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Found device TOSHIBA_MK4032GAX.
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Activating swap /dev/disk/by-uuid/0a64bde1-82c3-4cfb-ab68-7178564d8ed5...
Jun 14 16:13:09 wishthinkpad.loc kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jun 14 16:13:09 wishthinkpad.loc kernel: usbcore: registered new interface driver rt73usb
Jun 14 16:13:09 wishthinkpad.loc kernel: Adding 995992k swap on /dev/sda5. Priority:-1 extents:1 across:995992k
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Activated swap /dev/disk/by-uuid/0a64bde1-82c3-4cfb-ab68-7178564d8ed5.
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Starting Swap.
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Reached target Swap.
Jun 14 16:13:09 wishthinkpad.loc systemd-fsck[140]: /dev/sda6: clean, 62025/65280 files, 185105/261048 blocks
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Found device TOSHIBA_MK4032GAX.
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Starting File System Check on /dev/disk/by-uuid/e4eb21d7-8ea8-4059-b44b-778690e44675...
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Started File System Check on /dev/disk/by-uuid/567947ca-cba3-42e4-9677-e9ddeecd2c26.
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Mounting /home...
Jun 14 16:13:09 wishthinkpad.loc kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Mounted /home.
Jun 14 16:13:09 wishthinkpad.loc kernel: ppdev: user-space parallel port driver
Jun 14 16:13:09 wishthinkpad.loc systemd-fsck[152]: Data: clean, 249/1692432 files, 5642949/6757332 blocks
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started File System Check on /dev/disk/by-uuid/e4eb21d7-8ea8-4059-b44b-778690e44675.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Mounting /media/Extra...
Jun 14 16:13:10 wishthinkpad.loc systemd-sysctl[165]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Mounted /media/Extra.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Local File Systems.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Reached target Local File Systems.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Recreate Volatile Files and Directories...
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Found device RT2501/RT2573 Wireless Adapter.
Jun 14 16:13:10 wishthinkpad.loc kernel: EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Recreate Volatile Files and Directories.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
Jun 14 16:13:10 wishthinkpad.loc systemd-journal[90]: Allowing system journal files to grow to 948.4M.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Update UTMP about System Reboot/Shutdown.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting System Initialization.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Reached target System Initialization.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting D-Bus System Message Bus Socket.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Listening on D-Bus System Message Bus Socket.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Sockets.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Reached target Sockets.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Daily Cleanup of Temporary Directories.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Daily Cleanup of Temporary Directories.
Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Timers.
Jun 14 16:13:19 wishthinkpad.loc kernel: phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
Jun 14 16:13:11 wishthinkpad.loc crond[176]: (CRON) INFO (Syslog will be used instead of sendmail.)
Jun 14 16:13:11 wishthinkpad.loc crond[176]: (CRON) INFO (running with inotify support)
Jun 14 16:13:13 wishthinkpad.loc sshd[178]: Server listening on 0.0.0.0 port 50505.
Jun 14 16:13:14 wishthinkpad.loc ntpd[200]: ntpd [email protected] Mon May 6 10:21:04 UTC 2013 (1)
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: proto: precision = 4.469 usec
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen and drop on 1 v6wildcard :: UDP 123
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen normally on 2 lo 127.0.0.1 UDP 123
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen normally on 3 wlan0 192.168.0.102 UDP 123
Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: peers refreshed
Jun 14 16:13:19 wishthinkpad.loc kernel: phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7.
Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun 14 16:13:19 wishthinkpad.loc systemd-logind[179]: Watching system buttons on /dev/input/event4 (Power Button)
Jun 14 16:13:19 wishthinkpad.loc systemd-logind[179]: Watching system buttons on /dev/input/event2 (Lid Switch)
Jun 14 16:13:19 wishthinkpad.loc systemd-logind[179]: Watching system buttons on /dev/input/event3 (Sleep Button)
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticate with 00:18:39:a0:db:3e
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: send auth to 00:18:39:a0:db:3e (try 1/3)
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticated
Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associate with 00:18:39:a0:db:3e (try 1/3)
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: RX AssocResp from 00:18:39:a0:db:3e (capab=0x411 status=0 aid=1)
Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jun 14 16:13:19 wishthinkpad.loc shorewall[199]: Starting Shorewall....
Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associated
Jun 14 16:13:19 wishthinkpad.loc kernel: ACPI: Fatal opcode executed
Jun 14 16:13:19 wishthinkpad.loc kernel: ACPI: Battery Slot [BAT0] (battery present)
Jun 14 16:13:19 wishthinkpad.loc kernel: ACPI: Battery Slot [BAT1] (battery absent)
Jun 14 16:13:19 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0418, PCI irq 11
Jun 14 16:13:19 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: Socket status: 30000006
Jun 14 16:13:19 wishthinkpad.loc kernel: agpgart-intel 0000:00:00.0: Intel 440BX Chipset
Jun 14 16:13:19 wishthinkpad.loc kernel: agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x40000000
Jun 14 16:13:19 wishthinkpad.loc kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
Jun 14 16:13:19 wishthinkpad.loc shorewall[199]: Initializing...
Jun 14 16:13:19 wishthinkpad.loc kernel: excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
Jun 14 16:13:19 wishthinkpad.loc kernel: excluding
Jun 14 16:13:19 wishthinkpad.loc kernel: 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f 0x3a0-0x3a7
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
Jun 14 16:13:19 wishthinkpad.loc kernel:
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
Jun 14 16:13:19 wishthinkpad.loc kernel: excluding 0x3f0-0x3ff
Jun 14 16:13:19 wishthinkpad.loc kernel: excluding
Jun 14 16:13:19 wishthinkpad.loc kernel: 0x3f0-0x3ff 0x4d0-0x4d7
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
Jun 14 16:13:19 wishthinkpad.loc kernel: clean.
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
Jun 14 16:13:19 wishthinkpad.loc kernel: clean.
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
Jun 14 16:13:19 wishthinkpad.loc kernel: excluding 0xc0000-0xcbfff 0xf0000-0xfffff
Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
Jun 14 16:13:19 wishthinkpad.loc kernel: -
Item Conversion Template Issue for Oracle Migration - Copy functionality
Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PMIssue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi -
I am having issue with RMAN
I have Oracle 11gR2 database on HP-UX. when I issue any command in RMAN prompt, its displaying the information but it's not returning to RMAN prompt, I have to hit CTRL+C to come out. But I have 2 more database on the same home, and I don't have this problem on that database.
oracle@hublhp10:/home/oracle$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Mon Mar 19 15:00:53 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: IMGPROD (DBID=2867365220)
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters for database with db_unique_name IMGPROD are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/imgback/RMAN/cf-IMGPROD-%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/imgback/RMAN/snapcf_imgprod.f';
RMAN>
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
Report of obsolete backups and copies
Type Key Completion Time Filename/Handle
Archive Log 1 19-MAR-12 /imgarch/ORACLE/imgprod/al_imgprod_1_283_777982948.dbfI traced the session, see the following
WAIT #2: nam='control file sequential read' ela= 143 file#=0 block#=17 blocks=1 obj#=-1 tim=11750515395399
WAIT #2: nam='control file sequential read' ela= 143 file#=0 block#=1 blocks=1 obj#=-1 tim=11750515395853
WAIT #2: nam='control file sequential read' ela= 144 file#=0 block#=15 blocks=1 obj#=-1 tim=11750515396024
WAIT #2: nam='control file sequential read' ela= 145 file#=0 block#=17 blocks=1 obj#=-1 tim=11750515396192
WAIT #2: nam='control file sequential read' ela= 206 file#=0 block#=1 blocks=1 obj#=-1 tim=11750515396719
WAIT #2: nam='control file sequential read' ela= 142 file#=0 block#=15 blocks=1 obj#=-1 tim=11750515396909
WAIT #2: nam='control file sequential read' ela= 168 file#=0 block#=17 blocks=1 obj#=-1 tim=11750515397102
FETCH #2:c=0,e=16905,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=818693323,tim=11750515397527
WAIT #2: nam='SQL*Net message from client' ela= 450 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=11750515398178
CLOSE #2:c=0,e=27,dep=0,type=3,tim=11750515398262
=====================
PARSING IN CURSOR #4 len=205 dep=0 uid=0 oct=3 lid=0 tim=11750515399507 hv=1796820951 ad='c0000004fe449f88' sqlid='gq4u3dppjkmyr'
select /*+ rule */ round(sum(MBYTES_PROCESSED)), round(sum(INPUT_BYTES)), round(sum(OUTPUT_BYTES)) from V$RMAN_STATUS START WITH RECID = :row_id and STAMP = :row_stamp CONNECT BY PRIOR RECID = parent_recid
END OF STMT
PARSE #4:c=0,e=556,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=0,tim=11750515399506 -
NVIDIA Issues; hitting the video card hangs the machine
Hello everybody, this could easily be placed under the Kernel and Hardware forum, but this one suits my experience level better. I tried
searching for some similar issues to what I am having, but wasn't able to come up with anything. (Perhaps I was an unknown keyword off in my searches. )
Additionally, thanks in advance for any help! I'm pretty much out of ideas short of replacing some hardware.
My problem is that whenever my desktop displays anything that is graphically intensive, it freezes. I first experienced this while I had Slackware 13.1 installed when trying to run Minecraft. I had been running it successfully for a month or two when it hung while I was playing. I switched over to Arch in the hopes that it would be easier for me to troubleshoot the problem. This was a few months ago, and I've not been able to figure it out.
I'm running with an i7 930 CPU, GTX 480 video card, and six gigs of RAM. My xorg.conf is below:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 ([email protected]) Mon Apr 18 15:14:00 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
I dug through my logs and the only strange thing I found was in kernel.log:
Jul 3 13:56:43 localhost kernel: [ 101.297777] NVRM: GPU at 0000:03:00.0 has fallen off the bus.
For what it's worth, here is my Xorg.0.conf (but the only error is related to my keyboard, which actually works fine):
[ 28.765]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 28.766] X Protocol Version 11, Revision 0
[ 28.766] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 28.766] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64
[ 28.766] Kernel command line: root=/dev/disk/by-uuid/53882ab2-b171-4117-a8a2-6ec984ace8e2 ro
[ 28.767] Build Date: 30 May 2011 08:18:15AM
[ 28.767]
[ 28.767] Current version of pixman: 0.22.0
[ 28.767] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.768] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.770] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 3 14:20:49 2011
[ 28.800] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.801] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.817] (==) ServerLayout "Layout0"
[ 28.817] (**) |-->Screen "Screen0" (0)
[ 28.817] (**) | |-->Monitor "Monitor0"
[ 28.817] (**) | |-->Device "Device0"
[ 28.817] (**) |-->Input Device "Keyboard0"
[ 28.817] (**) |-->Input Device "Mouse0"
[ 28.817] (==) Automatically adding devices
[ 28.817] (==) Automatically enabling devices
[ 28.837] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 28.857] Entry deleted from font path.
[ 28.857] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 28.857] Entry deleted from font path.
[ 28.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 28.858] (==) FontPath set to:
/usr/share/fonts/misc/
[ 28.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 28.858] (WW) Disabling Keyboard0
[ 28.858] (WW) Disabling Mouse0
[ 28.858] (II) Loader magic: 0x7d3440
[ 28.858] (II) Module ABI versions:
[ 28.858] X.Org ANSI C Emulation: 0.4
[ 28.858] X.Org Video Driver: 10.0
[ 28.858] X.Org XInput driver : 12.2
[ 28.858] X.Org Server Extension : 5.0
[ 28.859] (--) PCI:*(0:3:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xdc000000/33554432, 0xc8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000df00/128, BIOS @ 0x????????/524288
[ 28.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 28.859] (II) LoadModule: "extmod"
[ 28.878] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.889] (II) Module extmod: vendor="X.Org Foundation"
[ 28.889] compiled for 1.10.2, module version = 1.0.0
[ 28.889] Module class: X.Org Server Extension
[ 28.889] ABI class: X.Org Server Extension, version 5.0
[ 28.889] (II) Loading extension MIT-SCREEN-SAVER
[ 28.889] (II) Loading extension XFree86-VidModeExtension
[ 28.889] (II) Loading extension XFree86-DGA
[ 28.889] (II) Loading extension DPMS
[ 28.889] (II) Loading extension XVideo
[ 28.889] (II) Loading extension XVideo-MotionCompensation
[ 28.889] (II) Loading extension X-Resource
[ 28.889] (II) LoadModule: "dbe"
[ 28.889] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.890] (II) Module dbe: vendor="X.Org Foundation"
[ 28.890] compiled for 1.10.2, module version = 1.0.0
[ 28.890] Module class: X.Org Server Extension
[ 28.890] ABI class: X.Org Server Extension, version 5.0
[ 28.890] (II) Loading extension DOUBLE-BUFFER
[ 28.890] (II) LoadModule: "glx"
[ 28.890] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.187] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.195] compiled for 4.0.2, module version = 1.0.0
[ 29.195] Module class: X.Org Server Extension
[ 29.195] (II) NVIDIA GLX Module 275.09.07 Wed Jun 8 14:34:43 PDT 2011
[ 29.195] (II) Loading extension GLX
[ 29.195] (II) LoadModule: "record"
[ 29.195] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.196] (II) Module record: vendor="X.Org Foundation"
[ 29.196] compiled for 1.10.2, module version = 1.13.0
[ 29.196] Module class: X.Org Server Extension
[ 29.196] ABI class: X.Org Server Extension, version 5.0
[ 29.196] (II) Loading extension RECORD
[ 29.196] (II) LoadModule: "dri"
[ 29.196] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.207] (II) Module dri: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.0.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension XFree86-DRI
[ 29.207] (II) LoadModule: "dri2"
[ 29.207] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.207] (II) Module dri2: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.2.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension DRI2
[ 29.207] (II) LoadModule: "nvidia"
[ 29.208] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.240] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 29.241] compiled for 4.0.2, module version = 1.0.0
[ 29.241] Module class: X.Org Video Driver
[ 29.246] (II) NVIDIA dlloader X Driver 275.09.07 Wed Jun 8 14:18:12 PDT 2011
[ 29.246] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 29.246] (--) using VT number 7
[ 29.255] (II) Loading sub module "fb"
[ 29.255] (II) LoadModule: "fb"
[ 29.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.262] (II) Module fb: vendor="X.Org Foundation"
[ 29.262] compiled for 1.10.2, module version = 1.0.0
[ 29.262] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.262] (II) Loading sub module "wfb"
[ 29.262] (II) LoadModule: "wfb"
[ 29.262] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.270] (II) Module wfb: vendor="X.Org Foundation"
[ 29.270] compiled for 1.10.2, module version = 1.0.0
[ 29.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.270] (II) Loading sub module "ramdac"
[ 29.270] (II) LoadModule: "ramdac"
[ 29.270] (II) Module "ramdac" already built-in
[ 29.271] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.272] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.272] (==) NVIDIA(0): RGB weight 888
[ 29.272] (==) NVIDIA(0): Default visual is TrueColor
[ 29.272] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.069] (II) NVIDIA(GPU-0): Display (AOC 2436 (CRT-1)) does not support NVIDIA 3D Vision
[ 30.069] (II) NVIDIA(GPU-0): stereo.
[ 30.070] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:3:0:0 (GPU-0)
[ 30.070] (--) NVIDIA(0): Memory: 1572864 kBytes
[ 30.070] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.02
[ 30.070] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.070] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.070] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 480 at PCI:3:0:0
[ 30.070] (--) NVIDIA(0): AOC 2436 (CRT-1)
[ 30.071] (--) NVIDIA(0): AOC 2436 (CRT-1): 400.0 MHz maximum pixel clock
[ 30.109] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 30.109] (==) NVIDIA(0):
[ 30.109] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.109] (==) NVIDIA(0): will be used as the requested mode.
[ 30.109] (==) NVIDIA(0):
[ 30.109] (II) NVIDIA(0): Validated modes:
[ 30.109] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.110] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.134] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 30.134] (--) NVIDIA(0): option
[ 30.134] (--) Depth 24 pixmap format is 32 bpp
[ 30.134] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 30.134] (II) NVIDIA: access.
[ 30.144] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.144] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.144] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.144] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.144] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.144] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.144] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.144] (II) NVIDIA(0): Config Options in the README.
[ 30.147] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 30.208] (II) Loading extension NV-GLX
[ 30.270] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.270] (==) NVIDIA(0): Backing store disabled
[ 30.270] (==) NVIDIA(0): Silken mouse enabled
[ 30.271] (**) NVIDIA(0): DPMS enabled
[ 30.271] (II) Loading extension NV-CONTROL
[ 30.271] (II) Loading extension XINERAMA
[ 30.271] (II) Loading sub module "dri2"
[ 30.271] (II) LoadModule: "dri2"
[ 30.271] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.272] (II) Module dri2: vendor="X.Org Foundation"
[ 30.272] compiled for 1.10.2, module version = 1.2.0
[ 30.272] ABI class: X.Org Server Extension, version 5.0
[ 30.272] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.272] (==) RandR enabled
[ 30.272] (II) Initializing built-in extension Generic Event Extension
[ 30.272] (II) Initializing built-in extension SHAPE
[ 30.272] (II) Initializing built-in extension MIT-SHM
[ 30.272] (II) Initializing built-in extension XInputExtension
[ 30.272] (II) Initializing built-in extension XTEST
[ 30.272] (II) Initializing built-in extension BIG-REQUESTS
[ 30.272] (II) Initializing built-in extension SYNC
[ 30.272] (II) Initializing built-in extension XKEYBOARD
[ 30.272] (II) Initializing built-in extension XC-MISC
[ 30.272] (II) Initializing built-in extension SECURITY
[ 30.272] (II) Initializing built-in extension XINERAMA
[ 30.272] (II) Initializing built-in extension XFIXES
[ 30.272] (II) Initializing built-in extension RENDER
[ 30.272] (II) Initializing built-in extension RANDR
[ 30.272] (II) Initializing built-in extension COMPOSITE
[ 30.272] (II) Initializing built-in extension DAMAGE
[ 30.273] (II) Initializing extension GLX
[ 30.487] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.487] (II) LoadModule: "evdev"
[ 30.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (II) Module evdev: vendor="X.Org Foundation"
[ 30.506] compiled for 1.10.0, module version = 2.6.0
[ 30.506] Module class: X.Org XInput Driver
[ 30.506] ABI class: X.Org XInput driver, version 12.2
[ 30.506] (II) Using input driver 'evdev' for 'Power Button'
[ 30.506] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (**) Power Button: always reports core events
[ 30.506] (**) Power Button: Device: "/dev/input/event1"
[ 30.530] (--) Power Button: Found keys
[ 30.530] (II) Power Button: Configuring as keyboard
[ 30.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 30.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.530] (**) Option "xkb_rules" "evdev"
[ 30.530] (**) Option "xkb_model" "evdev"
[ 30.530] (**) Option "xkb_layout" "us"
[ 30.561] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.561] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.561] (II) Using input driver 'evdev' for 'Power Button'
[ 30.561] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.561] (**) Power Button: always reports core events
[ 30.561] (**) Power Button: Device: "/dev/input/event0"
[ 30.583] (--) Power Button: Found keys
[ 30.583] (II) Power Button: Configuring as keyboard
[ 30.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 30.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.583] (**) Option "xkb_rules" "evdev"
[ 30.583] (**) Option "xkb_model" "evdev"
[ 30.583] (**) Option "xkb_layout" "us"
[ 30.590] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event4)
[ 30.590] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.590] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.591] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event4"
[ 30.623] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.623] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.623] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input4/event4"
[ 30.623] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.623] (**) Option "xkb_rules" "evdev"
[ 30.624] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event5)
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event5"
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found relative axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input5/event5"
[ 30.650] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.650] (**) Option "xkb_rules" "evdev"
[ 30.650] (**) Option "xkb_model" "evdev"
[ 30.650] (**) Option "xkb_layout" "us"
[ 30.650] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: initialized for absolute axes.
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 30.651] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/event6)
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[ 30.651] (II) Using input driver 'evdev' for 'Microsoft Microsoft Optical Mouse with Tilt Wheel'
[ 30.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: always reports core events
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Device: "/dev/input/event6"
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found relative axes
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found x and y relative axes
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Configuring as mouse
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Adding scrollwheel support
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/input/input6/event6"
[ 30.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft Optical Mouse with Tilt Wheel" (type: MOUSE)
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: initialized for relative axes.
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.677] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.680] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.680] (II) No input driver/identifier specified (ignoring)
The more I investigate, the more I feel like this could be a hardware problem. I checked the CPU temp first, but it only reaches ~32 degrees celsius when the system hangs, so I doubt that's the cause. I've checked the cables (power and otherwise) between everything in my box, and it's all solid. I've also taken the sides off, thinking it my be an air flow issue, but that didn't solve it either.
On the software side of things, I've got nvidia, nvidia-utils, and lib32-nvidia-utils installed and they aren't popping any errors that I can see. When I run glxinfor or glxgears, nothing happens, the terminal just prompts me for input (which is actually an improvement, in Slackware, they hung the machine).
Again, any help on this issue is greatly appreciated, I'm at my wit's end about it.I had a similar problem that turned out to be the graphics card working itself loose. So, if you haven't already, try taking it out, cleaning the contacts and plugging it back in. Worth a try and worked for me
Also, Xorg 1.10.2 & the nvidia proprietary driver don't seem to be in conflict for me so I think williewillus is mistaken. -
Issue in ALV List display
Posted: Apr 5, 2008 10:25 AM Edit E-mail this message Reply
Hi Friends,
Can any one help me out in the logic to display the output in the ALV list.
i want to get the out put as
based on the field4 i have to display fieds5, field6 and field 7 values as mentioned below.
field1 field2 field3 field4 field5 field6 field7
0L 123 456 2008 001 123.00 456.00
- - - - 002 213.00 789.00
- - - 003 0.00 0.00
- - - 004 0.00 0.00
- - - 005 0.00 0.00
- - - 006 0.00 0.00
336.00 1245.00
Thanks,
Vijayfor display you have to define fieldcatlaog and use Fm RESUE_ALV_GRID_DISPLAY,
Go through this program
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT. -
Wireless issue on Lenovo B570e2 with Atheros AR9285
Hello,
I have just bought a Lenovo B570e2 with an Atheros AR9285 wireless card and have from now lost two days trying to make it work. Since it works perfectly with Windows 7, it doesn't seem to be an hardware issue. The card is recognized and the ath9k module is loaded, but I cannot see any wireless network, whilst Windows 7 detects more than 10 at the same location.
Here's some piece of information :
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012
[ 0.000000] Command line: root=/dev/sda1 ro quiet initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac86fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bac87000-0x00000000baefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 521528G/Emerald Lake, BIOS 44CN43WW 10/27/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fdfffff]
[ 0.000000] [mem 0x100000000-0x13fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13fdfffff @ [mem 0xbac81000-0xbac86fff]
[ 0.000000] RAMDISK: [mem 0x7fce4000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000f0110 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe120 00084 (v01 LENOVO CB-01 00000001 LENO 00000001)
[ 0.000000] ACPI: FACP 00000000bafee000 000F4 (v03 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000baff1000 09AC3 (v02 LENOVO SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf3d000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO CB-01 00000001 LENO 00000001)
[ 0.000000] ACPI: SSDT 00000000baffb000 01068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000baff0000 000A5 (v32 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: HPET 00000000bafed000 00038 (v01 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: APIC 00000000bafec000 00098 (v01 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: MCFG 00000000bafeb000 0003C (v01 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bafea000 0090C (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafe9000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe8000 0003E (v01 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bafe6000 00256 (v01 LENOVO CB-01 00000001 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdfffff]
[ 0.000000] NODE_DATA [mem 0x13fdfc000-0x13fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b400000-ffff88013f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbac86fff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fdfffff]
[ 0.000000] On node 0 totalpages: 1026581
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 744648 pages, LIFO batch:31
[ 0.000000] Normal zone: 4088 pages used for memmap
[ 0.000000] Normal zone: 257544 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bac87000 - 00000000baeff000
[ 0.000000] PM: Registered nosave memory: 00000000baeff000 - 00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fa00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006103
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3959408k/5240832k available (4726k kernel code, 1134508k absent, 146916k reserved, 4143k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2195.026 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.97 BogoMIPS (lpj=7316753)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000035] Security Framework initialized
[ 0.000039] AppArmor: AppArmor disabled by boot time parameter
[ 0.000307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001323] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001763] Mount-cache hash table entries: 256
[ 0.001954] Initializing cgroup subsys cpuacct
[ 0.001957] Initializing cgroup subsys memory
[ 0.001964] Initializing cgroup subsys devices
[ 0.001966] Initializing cgroup subsys freezer
[ 0.001967] Initializing cgroup subsys net_cls
[ 0.001968] Initializing cgroup subsys blkio
[ 0.001992] Disabled fast string operations
[ 0.001993] CPU: Physical Processor ID: 0
[ 0.001994] CPU: Processor Core ID: 0
[ 0.001999] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002001] mce: CPU supports 7 MCE banks
[ 0.002013] CPU0: Thermal monitoring enabled (TM1)
[ 0.002019] process: using mwait in idle threads
[ 0.002023] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x5
[ 0.002968] ACPI: Core revision 20120711
[ 0.008307] ftrace: allocating 18347 entries in 72 pages
[ 0.017888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050858] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
[ 0.156195] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.156200] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.156202] ... version: 3
[ 0.156203] ... bit width: 48
[ 0.156204] ... generic registers: 4
[ 0.156205] ... value mask: 0000ffffffffffff
[ 0.156206] ... max period: 000000007fffffff
[ 0.156206] ... fixed-purpose events: 3
[ 0.156207] ... event mask: 000000070000000f
[ 0.183036] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.207294] Disabled fast string operations
[ 0.233924] Disabled fast string operations
[ 0.257228] Disabled fast string operations
[ 0.196175] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.259393] Brought up 4 CPUs
[ 0.259397] smpboot: Total of 4 processors activated (17567.88 BogoMIPS)
[ 0.262873] devtmpfs: initialized
[ 0.263822] PM: Registering ACPI NVS region [mem 0xbaeff000-0xbaf9efff] (655360 bytes)
[ 0.264829] NET: Registered protocol family 16
[ 0.264948] ACPI: bus type pci registered
[ 0.265018] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.265020] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.270706] PCI: Using configuration type 1 for base access
[ 0.271186] bio: create slab <bio-0> at 0
[ 0.271237] ACPI: Added _OSI(Module Device)
[ 0.271239] ACPI: Added _OSI(Processor Device)
[ 0.271240] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.271241] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.272681] ACPI: EC: Look up EC in DSDT
[ 0.274180] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.276653] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.277032] ACPI: SSDT 00000000baeef718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.277400] ACPI: Dynamic OEM Table Load:
[ 0.277402] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.277643] ACPI: SSDT 00000000baef0a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.278038] ACPI: Dynamic OEM Table Load:
[ 0.278040] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.278145] ACPI: SSDT 00000000baeeed98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.278512] ACPI: Dynamic OEM Table Load:
[ 0.278513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.280983] ACPI: Interpreter enabled
[ 0.280986] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.281006] ACPI: Using IOAPIC for interrupt routing
[ 0.285986] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.286145] ACPI: No dock devices found.
[ 0.286149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.286432] \_SB_.PCI0:_OSC invalid UUID
[ 0.286433] _OSC request data:1 8 1f
[ 0.286437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.286920] PCI host bridge to bus 0000:00
[ 0.286923] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
[ 0.286925] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.286927] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.286928] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.286930] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.286931] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.286933] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.286941] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.286980] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.286991] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.286997] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.287002] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 0.287058] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.287082] pci 0000:00:16.0: reg 10: [mem 0xd0605000-0xd060500f 64bit]
[ 0.287161] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.287198] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.287220] pci 0000:00:1a.0: reg 10: [mem 0xd060a000-0xd060a3ff]
[ 0.287314] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.287342] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.287359] pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit]
[ 0.287430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.287456] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.287538] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.287566] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.287649] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.287676] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.287758] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.287795] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.287817] pci 0000:00:1d.0: reg 10: [mem 0xd0609000-0xd06093ff]
[ 0.287911] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.287939] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.288068] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.288088] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
[ 0.288096] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
[ 0.288104] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
[ 0.288113] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
[ 0.288121] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 0.288130] pci 0000:00:1f.2: reg 24: [mem 0xd0608000-0xd06087ff]
[ 0.288177] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.288197] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.288213] pci 0000:00:1f.3: reg 10: [mem 0xd0604000-0xd06040ff 64bit]
[ 0.288235] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.288311] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
[ 0.288315] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.288369] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
[ 0.288414] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.288462] pci 0000:02:00.0: reg 10: [mem 0xd0500000-0xd050ffff 64bit]
[ 0.288689] pci 0000:02:00.0: supports D1
[ 0.288691] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.292742] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.292756] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.292853] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
[ 0.292937] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.293001] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.293121] pci 0000:03:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
[ 0.293190] pci 0000:03:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
[ 0.293518] pci 0000:03:00.0: supports D1 D2
[ 0.293519] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.299419] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.299429] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.299447] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[ 0.299495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.299582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.299608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.299634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.299708] \_SB_.PCI0:_OSC invalid UUID
[ 0.299709] _OSC request data:1 1f 1f
[ 0.299713] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.299714] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.301874] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.301916] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.301957] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.301996] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.302035] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.302077] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.302116] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.302155] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.302235] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.302239] vgaarb: loaded
[ 0.302240] vgaarb: bridge control possible 0000:00:02.0
[ 0.302270] PCI: Using ACPI for IRQ routing
[ 0.303860] PCI: pci_cache_line_size set to 64 bytes
[ 0.303938] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.303939] e820: reserve RAM buffer [mem 0xbac87000-0xbbffffff]
[ 0.303941] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.303942] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
[ 0.304024] NetLabel: Initializing
[ 0.304026] NetLabel: domain hash size = 128
[ 0.304026] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.304038] NetLabel: unlabeled traffic allowed by default
[ 0.304054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.304059] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.306072] Switching to clocksource hpet
[ 0.310888] pnp: PnP ACPI init
[ 0.310905] ACPI: bus type pnp registered
[ 0.311180] pnp 00:00: [bus 00-3e]
[ 0.311182] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.311184] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.311186] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.311187] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.311189] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.311190] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.311192] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.311193] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.311194] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.311196] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.311197] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.311199] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.311200] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.311202] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.311203] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.311204] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.311206] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.311207] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.311209] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.311269] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.311280] pnp 00:01: [io 0x0000-0x001f]
[ 0.311284] pnp 00:01: [io 0x0081-0x0091]
[ 0.311285] pnp 00:01: [io 0x0093-0x009f]
[ 0.311286] pnp 00:01: [io 0x00c0-0x00df]
[ 0.311288] pnp 00:01: [dma 4]
[ 0.311307] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.311314] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.311330] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.311394] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.311413] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.311421] pnp 00:04: [io 0x00f0]
[ 0.311431] pnp 00:04: [irq 13]
[ 0.311448] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.311457] pnp 00:05: [io 0x002e-0x002f]
[ 0.311458] pnp 00:05: [io 0x004e-0x004f]
[ 0.311459] pnp 00:05: [io 0x0061]
[ 0.311460] pnp 00:05: [io 0x0063]
[ 0.311461] pnp 00:05: [io 0x0065]
[ 0.311463] pnp 00:05: [io 0x0067]
[ 0.311464] pnp 00:05: [io 0x0070]
[ 0.311465] pnp 00:05: [io 0x0080]
[ 0.311466] pnp 00:05: [io 0x0092]
[ 0.311467] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.311469] pnp 00:05: [io 0x1000-0x100f]
[ 0.311470] pnp 00:05: [io 0xffff]
[ 0.311471] pnp 00:05: [io 0xffff]
[ 0.311472] pnp 00:05: [io 0x0400-0x0453]
[ 0.311473] pnp 00:05: [io 0x0458-0x047f]
[ 0.311475] pnp 00:05: [io 0x0500-0x057f]
[ 0.311476] pnp 00:05: [io 0x0068-0x006f]
[ 0.311477] pnp 00:05: [mem 0xfe800000-0xfe80ffff]
[ 0.311515] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.311517] system 00:05: [io 0xffff] has been reserved
[ 0.311518] system 00:05: [io 0xffff] has been reserved
[ 0.311521] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.311522] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.311524] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.311526] system 00:05: [mem 0xfe800000-0xfe80ffff] has been reserved
[ 0.311529] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311536] pnp 00:06: [io 0x0070-0x0077]
[ 0.311541] pnp 00:06: [irq 8]
[ 0.311560] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.311581] pnp 00:07: [io 0x0454-0x0457]
[ 0.311608] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.311611] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.311657] pnp 00:08: [io 0x0060]
[ 0.311658] pnp 00:08: [io 0x0064]
[ 0.311663] pnp 00:08: [irq 1]
[ 0.311684] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.311694] pnp 00:09: [irq 12]
[ 0.311714] pnp 00:09: Plug and Play ACPI device, IDs ETD0604 ETD0001 ETD0002 PNP0f13 (active)
[ 0.311798] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.311799] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.311801] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.311802] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.311803] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.311805] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.311806] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.311807] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.311809] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.311810] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.311813] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
[ 0.311845] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.311847] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.311849] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.311851] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.311852] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.311854] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.311856] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.311857] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.311859] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.311861] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.311862] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.311865] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312038] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.312039] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 0.312083] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.312085] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.312087] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.312104] pnp: PnP ACPI: found 12 devices
[ 0.312105] ACPI: ACPI bus type pnp unregistered
[ 0.318657] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.318670] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.318676] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.318685] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.318687] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.318695] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[ 0.318731] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.318732] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.318734] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.318736] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.318737] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.318739] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.318741] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.318742] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
[ 0.318772] NET: Registered protocol family 2
[ 0.319365] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.321068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.321286] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.321317] TCP: reno registered
[ 0.321326] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.321345] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.321428] NET: Registered protocol family 1
[ 0.321440] pci 0000:00:02.0: Boot video device
[ 0.321554] PCI: CLS 64 bytes, default 64
[ 0.321595] Unpacking initramfs...
[ 0.383826] Freeing initrd memory: 3180k freed
[ 0.384495] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.384501] software IO TLB [mem 0xb6c81000-0xbac80fff] (64MB) mapped at [ffff8800b6c81000-ffff8800bac80fff]
[ 0.384874] audit: initializing netlink socket (disabled)
[ 0.384885] type=2000 audit(1351894392.276:1): initialized
[ 0.396624] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.398149] VFS: Disk quotas dquot_6.5.2
[ 0.398190] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.398317] msgmni has been set to 7739
[ 0.398512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.398542] io scheduler noop registered
[ 0.398544] io scheduler deadline registered
[ 0.398590] io scheduler cfq registered (default)
[ 0.398854] intel_idle: MWAIT substates: 0x21120
[ 0.398856] intel_idle: v0.4 model 0x2A
[ 0.398857] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.398892] GHES: HEST is not enabled!
[ 0.398939] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.399351] Linux agpgart interface v0.103
[ 0.399430] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.401557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.401581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.401673] mousedev: PS/2 mouse device common for all mice
[ 0.401722] rtc_cmos 00:06: RTC can wake from S4
[ 0.401852] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.401879] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401957] cpuidle: using governor ladder
[ 0.402055] cpuidle: using governor menu
[ 0.402159] drop_monitor: Initializing network drop monitor service
[ 0.402222] TCP: cubic registered
[ 0.402309] NET: Registered protocol family 10
[ 0.402438] NET: Registered protocol family 17
[ 0.402447] Key type dns_resolver registered
[ 0.402714] PM: Hibernation image not present or could not be loaded.
[ 0.402725] registered taskstats version 1
[ 0.403232] rtc_cmos 00:06: setting system clock to 2012-11-02 22:13:13 UTC (1351894393)
[ 0.404422] Freeing unused kernel memory: 768k freed
[ 0.404561] Write protecting the kernel read-only data: 8192k
[ 0.408327] Freeing unused kernel memory: 1408k freed
[ 0.410095] Freeing unused kernel memory: 568k freed
[ 0.416116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.417653] systemd-udevd[53]: starting version 195
[ 0.420384] [drm] Initialized drm 1.1.0 20060810
[ 0.421402] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.439546] ACPI: Lid Switch [LID0]
[ 0.439618] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.439623] ACPI: Sleep Button [SLPB]
[ 0.439660] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.439663] ACPI: Power Button [PWRF]
[ 0.443071] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 0.443173] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.444147] pci 0000:00:00.0: detected 65536K stolen memory
[ 0.444222] i915 0000:00:02.0: setting latency timer to 64
[ 0.473062] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.473086] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.473087] [drm] Driver supports precise vblank timestamp query.
[ 0.473128] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.004237] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.122764] fbcon: inteldrmfb (fb0) is primary device
[ 1.385010] tsc: Refined TSC clocksource calibration: 2195.014 MHz
[ 1.385020] Switching to clocksource tsc
[ 1.470871] Console: switching to colour frame buffer device 170x48
[ 1.473442] fb0: inteldrmfb frame buffer device
[ 1.473444] drm: registered panic notifier
[ 1.476764] ACPI Error: Current brightness invalid (20120711/video-376)
[ 1.476897] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.476953] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 1.476972] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.478563] cfg80211: Calling CRDA to update world regulatory domain
[ 1.536490] ath: phy0: ASPM enabled: 0x43
[ 1.536493] ath: EEPROM regdomain: 0x65
[ 1.536494] ath: EEPROM indicates we should expect a direct regpair map
[ 1.536496] ath: Country alpha2 being used: 00
[ 1.536497] ath: Regpair used: 0x65
[ 1.539371] ieee80211 phy0: Failed to initialize wep: -2
[ 1.539378] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 1.539571] Registered led device: ath9k-phy0
[ 1.539577] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004fa0000, irq=17
[ 1.573762] SCSI subsystem initialized
[ 1.575180] ACPI: bus type scsi registered
[ 1.575316] libata version 3.00 loaded.
[ 1.575918] ahci 0000:00:1f.2: version 3.0
[ 1.575985] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.576019] ahci: SSS flag set, parallel bus scan disabled
[ 1.588070] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
[ 1.588076] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.588084] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.608933] scsi0 : ahci
[ 1.609057] scsi1 : ahci
[ 1.609163] scsi2 : ahci
[ 1.609268] scsi3 : ahci
[ 1.609399] scsi4 : ahci
[ 1.609505] scsi5 : ahci
[ 1.609561] ata1: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608100 irq 41
[ 1.609563] ata2: DUMMY
[ 1.609565] ata3: DUMMY
[ 1.609568] ata4: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608280 irq 41
[ 1.609572] ata5: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608300 irq 41
[ 1.609575] ata6: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608380 irq 41
[ 1.927764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.929028] ata1.00: ATA-8: HITACHI HTS547550A9E384, JE3ZD60D, max UDMA/100
[ 1.929038] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.930360] ata1.00: configured for UDMA/100
[ 1.930642] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54755 JE3Z PQ: 0 ANSI: 5
[ 2.247409] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.567065] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.568952] ata5.00: ATAPI: Optiarc DVD RW AD-7740H, A842, max UDMA/100
[ 2.571103] ata5.00: configured for UDMA/100
[ 2.572267] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7740H A842 PQ: 0 ANSI: 5
[ 2.890037] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.894144] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.894147] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.894185] sd 0:0:0:0: [sda] Write Protect is off
[ 2.894188] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.894203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.931438] sda: sda1
[ 2.931700] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.193708] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.899480] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 3.919422] systemd[1]: Set hostname to <smodbox>.
[ 4.173877] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 4.174035] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.174089] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.174102] systemd[1]: Starting Remote File Systems.
[ 4.174113] systemd[1]: Reached target Remote File Systems.
[ 4.174121] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.174148] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.174156] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.174176] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.174187] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.174214] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.174241] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.174331] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.174340] systemd[1]: Starting Encrypted Volumes.
[ 4.174350] systemd[1]: Reached target Encrypted Volumes.
[ 4.174404] systemd[1]: Starting udev Kernel Socket.
[ 4.174425] systemd[1]: Listening on udev Kernel Socket.
[ 4.174467] systemd[1]: Starting udev Control Socket.
[ 4.174489] systemd[1]: Listening on udev Control Socket.
[ 4.174498] systemd[1]: Starting Swap.
[ 4.174506] systemd[1]: Reached target Swap.
[ 4.174514] systemd[1]: Starting Journal Socket.
[ 4.174557] systemd[1]: Listening on Journal Socket.
[ 4.174571] systemd[1]: Starting File System Check on Root Device...
[ 4.178969] systemd[1]: Starting udev Kernel Device Manager...
[ 4.183204] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.188717] systemd[1]: Mounting Debug File System...
[ 4.222145] systemd[1]: Starting udev Coldplug all Devices...
[ 4.321880] systemd[1]: Started Load Kernel Modules.
[ 4.321916] systemd[1]: Mounted Configuration File System.
[ 4.321928] systemd[1]: Starting Setup Virtual Console...
[ 4.342077] systemd[1]: Mounting Huge Pages File System...
[ 4.362793] systemd-udevd[122]: starting version 195
[ 4.408386] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.408428] systemd[1]: Mounted FUSE Control File System.
[ 4.475271] systemd[1]: Starting Apply Kernel Variables...
[ 4.482124] systemd[1]: Starting Journal Service...
[ 4.515222] systemd[1]: Started Journal Service.
[ 5.146383] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 5.157730] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 5.158091] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 5.158405] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 5.158792] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.464259] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.464264] ACPI: Thermal Zone [TZS0] (49 C)
[ 5.464411] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.464413] ACPI: Thermal Zone [TZS1] (39 C)
[ 5.486141] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 5.486149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.486152] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 5.486155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.486157] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.519436] wmi: Mapper loaded
[ 5.623555] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 5.623563] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629718] ACPI: Battery Slot [BAT0] (battery present)
[ 5.631456] ACPI: AC Adapter [ADP1] (off-line)
[ 5.787874] ACPI: Requesting acpi_cpufreq
[ 6.178964] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.239273] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 6.266513] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.377140] iTCO_vendor_support: vendor-support=0
[ 6.377719] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.377763] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.377859] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.387946] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.387954] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.388168] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.484585] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
[ 6.592622] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.593023] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 6.593226] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc9000067e000, 3c:97:0e:06:17:d3, XID 0c200000 IRQ 43
[ 6.593229] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.682383] ACPI: bus type usb registered
[ 6.682468] usbcore: registered new interface driver usbfs
[ 6.682488] usbcore: registered new interface driver hub
[ 6.682533] usbcore: registered new device driver usb
[ 6.719033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.766701] systemd-journald[130]: Received SIGUSR1
[ 6.794142] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.841226] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.841359] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.841452] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.841780] mei 0000:00:16.0: setting latency timer to 64
[ 6.841864] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 6.847693] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.847699] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.847706] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.851604] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.851617] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 6.851643] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd060a000
[ 6.853281] mei 0000:00:16.0: wd: failed to find the client
[ 6.858964] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.859314] hub 1-0:1.0: USB hub found
[ 6.859326] hub 1-0:1.0: 2 ports detected
[ 6.859441] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.859445] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.859450] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.863362] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.863372] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 6.863391] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd0609000
[ 6.872239] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.872624] hub 2-0:1.0: USB hub found
[ 6.872628] hub 2-0:1.0: 2 ports detected
[ 6.978047] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x850f03)
[ 6.987300] systemd-journald[130]: File /var/log/journal/4ebb175d5bb0410e8001e911aa4a071a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.989505] psmouse serio1: elantech: Synaptics capabilities query result 0x18, 0x14, 0x0a.
[ 7.048723] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 7.165352] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 7.290024] hub 1-1:1.0: USB hub found
[ 7.290212] hub 1-1:1.0: 6 ports detected
[ 7.395087] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 7.519661] hub 2-1:1.0: USB hub found
[ 7.519888] hub 2-1:1.0: 6 ports detected
[ 7.598472] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 7.775465] Linux media interface: v0.10
[ 7.784857] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
[ 7.789661] Linux video capture interface: v2.00
[ 7.814706] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b272)
[ 7.816751] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12
[ 7.816870] usbcore: registered new interface driver uvcvideo
[ 7.816872] USB Video Class driver (1.1.1)
[ 7.894295] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.899095] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 7.899332] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.901794] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.904683] usbcore: registered new interface driver rts5139
[ 12.525163] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 12.525181] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node ffff880139a55b68), AE_NOT_FOUND (20120711/psparse-536)
[ 36.203724] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
[ 36.337496] usbcore: registered new interface driver uas
[ 36.342840] Initializing USB Mass Storage driver...
[ 36.343084] scsi7 : usb-storage 2-1.2:1.0
[ 36.343408] usbcore: registered new interface driver usb-storage
[ 36.343410] USB Mass Storage support registered.
[ 37.385077] scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 39.169203] sd 7:0:0:0: [sdc] 7643136 512-byte logical blocks: (3.91 GB/3.64 GiB)
[ 39.169756] sd 7:0:0:0: [sdc] Write Protect is off
[ 39.169763] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 39.170592] sd 7:0:0:0: [sdc] No Caching mode page present
[ 39.174197] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 39.182319] sd 7:0:0:0: [sdc] No Caching mode page present
[ 39.185332] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 39.223477] sdc: sdc1
[ 39.226302] sd 7:0:0:0: [sdc] No Caching mode page present
[ 39.229369] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 39.232367] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 61.295014] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 61.295034] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node ffff880139a55b68), AE_NOT_FOUND (20120711/psparse-536)
lspci -vv:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 3975
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3975
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4181
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 3975
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0605000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41e1
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 3975
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d060a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: Lenovo Device 3975
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41c1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device 3975
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device 3975
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000d0400000-00000000d04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device 3975
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 3975
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0609000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: Lenovo Device 3975
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 3975
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at d0608000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4191
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScmeop wrote:Have you tried with other tools? Networkmanager, Wicd? Are all the access points around you wireless N, or are some G? Sometimes Atheros chips have trouble communicating with other wireless N chips. I have experienced this on my router.
As far as iwlist doesn't detect any network, wpa_supplicant can't go further, and NM and Wicd are just wrapper tools for wpa_supplicant Wireless networks around are mixed b/g, no n capables.
I have also tried to connect to my network by using sscan_ssid=0, so that wpa_supplicant would try to connect to it but it didn't work.
meop wrote:This user posted a different issue recently, but at least he got the card working on Arch with Linux 3.6.2.. maybe you could message him?
Wow, quite strange, we indeed seem to have the same hardware and the same environnement, but not the same result, thanks for the tip!
meop wrote:The two solutions you tried were for a Ubuntu issue and a disconnect issue respectively, right? You could try loading a Live image of Ubuntu on your machine just to see if the card works on it, and then compare to Arch to see what settings or loaded module versions are different.
I forgot to add it to the "what I've tried" list, sorry. I have already tried to boot with a Live Cd of Ubuntu 12.10, 12.04 and even 9.10 (kernel 2.6.32)
Triby wrote:You have to put the interface up. You have not described what steps you have taken to try to actually connect ... in fact it's not clear that u have taken any. See the wireless wiki page and follow the manual connection steps. Post the results/output of any failed step here.
EDIT: the interface "link" is up : <NO-CARRER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000, only protocol is DOWN
I don't usually use front end like NM or Wicd, here's what I've done :
ip link set wlan0 up
wpa_passphrase <my ssid> <my password> > /etc/wpa_supplicant.conf
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
Then no result. As I wrote earlier, I've also added "sscan_ssid=0".
The problem is that "iwlist scan" does'nt get any result, meaning that my network card can't see wireless network around...
Thanks for your responses.
EDIT:
I may have found something interesting, while I try to play with iwconfig and iwlist, something happens frequently in my dmesg :
[ 104.887396] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 104.887418] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
[ 135.488964] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 135.488985] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
[ 172.469145] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 172.469168] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
[ 219.830670] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 219.830693] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
[ 234.578366] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
[ 234.578386] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
I don't know why but this seems to be related... I'm googling that for now...
Last edited by Smod (2012-11-03 08:57:35) -
Issue with 'modified by' on LiveCopies
Hello everybody,
we're facing a slightly perplexing issue on our CQ5.4 installation: when using 'Rollout Page', the page is rolled out to the correct livecopies, and the 'Modified' columns on the livecopies correctly show the author that performed the rollout.
If we use 'Activate Page' to both roll-out and activate the page, the livecopies get updated correctly... except the 'Modified' column says 'admin' instead of the correct author. The jcr:lastReplicatedBy property on the blueprint page is correct, though.
Is this by design, a misconfiguration on our part, or a bug/forgettance in CQ5.4?
A few more details on our setup, in case it's necessary:
Our global/corporate site is set up as a blueprint for each of our ~100 regional sites. The "Current Live Copies" section in the "Blueprint" tab correctly shows the livecopies. Our "Rollout Configs" is set to use the (OOTB, afaik) "Standard rollout config" and "Rollout on activation config" options, in that order.
The corporate site is English-only (let's say it's located under /content/global/en, with both "global" and "en" using our "Hompage" template). The livecopies are dumped into /content/regionXX/en, from where the regional authors use a translation workflow to update their language copies with the new material.
PS: this message has been cross-posted to the CQ5 google group and the Adobe CQ5 forum.with t1 as (
select 100 reqno,'pss' code from dual union all
select 200,'css' from dual union all
select 300,'rss' from dual
t2 as (
select 100 reqno,1000 updated_by,to_date('12-apr-2011','dd-mon-yyyy') update_date from dual union all
select 200,2000,to_date('13-may-2011','dd-mon-yyyy') from dual union all
select 300,3000,to_date('14-jun-2011','dd-mon-yyyy') from dual union all
select 100,4000,to_date('15-jul-2011','dd-mon-yyyy') from dual
-- end of on-the-fly data sample
select t1.reqno,
t1.code,
max(t2.updated_by) keep(dense_rank last order by update_date) updated_by,
max(t2.update_date) update_date
from t1,
t2
where t2.reqno = t1.reqno
group by t1.reqno,
t1.code
order by update_date
REQNO COD UPDATED_BY UPDATE_DA
200 css 2000 13-MAY-11
300 rss 3000 14-JUN-11
100 pss 4000 15-JUL-11
SQL> SY. -
Time enry collisions and wage type issues
Hi Experts,
We do not have holiday's embedded in our schedules due to the flexibility in when employees are allowed to take the paid time off and also due to
our "flex" work schedules being more than 8 hour work days but the holiday benefit is an 8 hour benefit. This has caused us a lot of issues with
time entry, however, we thought it had been corrected. We are now running into the same issues. Here is an example:
First Issue:
Work Schedule week of 12/31/07 - 01/05/08
Sun Mon Tues Wed Thur Fri Sat
Schedule 0 10 10 10 10 0 0
Tuesday the 1st is a holiday and the employee must enter Absence type 240 for 10 hours to fit his schedule. Employee also work on the holiday and
needs to enter Attendance type 832 for unscheduled holiday work. When we try to enter the attendance we receive a full day collision error and
cannot continue.
Second Issue:
Work Schedule week of 12/31/07 - 01/05/08
Sun Mon Tues Wed Thur Fri Sat
Schedule 0 8 8 8 8 8 0
Tuesday is the holiday and the employee enters Absence type 240 for 8 hours to fit her schedule. She is also on Standy-By time for the holiday. We
had to configure standby time specifically as a wage type and activate the wage type column in the CATS entry screen. She must enter W/T (it's the
only option) 1802 and then record 24 hours in the date 01/01/08. This entry also gives us a full day collision message and we cannot continue.
We can provide more examples when a consultant is assigned. These options used to work and we do not know why they are no longer working.
Advice me to resolve this ticket on time, its high priority ticket.Hi,
I think your 1st problem comes from the misunderstanding of SAP work schedule logic.
As you mentioned, you want to input ab type 240 to fit work schedule. But it's not necessary.
For that day is a WORK day with holiday class 1. That means scheduled work can be overwrited by holiday. If the employee does not come to work in that day without any 2001 informations, he/she is NOT absence,because that day is a paid time off.
And as for the attendance type, it's also no needed. Because if employee came to work in a public holiday, the working hours will automatically counted as OT hours but UNAPPORVED! To approve this OT, you need input 2007 attendance quota. In this example, the employee got 10 hours OT in puplic holiday which is recorded by SAP TM but unapporved. Then you should create a 2007 record with 10 hours attendance quota in the same day. By doing this, the TM evaluation will count those 10 hours as paid OT.
I think the way above is what you called "flexibility in when employees are allowed to take the paid time off "
Hope helpful
Br,Kee
Maybe you are looking for
-
How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone? Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't app
-
Can't install 64-bit DAC on Windows 2008 R2 64-bit
Hi all, When I attempt to run the 64-bit DAC setup.exe installer (either from the root folder or from win64), I get the following: Checking swap space: must be greater than 150 MB . Actual 3319 MB Passed Checking monitor: must be configured to displa
-
How to perform batch processing or write javascripts and execute in Acrobat 9 standard
I would like to add file name as water mark to bottom of each page of a file. I need to do this for 100s of pdf files. Can anyone please let me know how this can be achieved in batch processing or using javascripts in Acrobat 9 standard
-
The topic says it all. Each time I down load an App I get a notifcation to my iphone telling me to turn on automatic syncing. I want it to stop. How do I stop it.
-
Data Socket Publish and Subscribe option
I'm writing a server/ client application in wish the client needs to be updated by the server with information when its first started and then also be able to write back to the same controls thru data socket. The applications are on two different com