Monitor/capture tcp data between a server and client

Hi
I am doing a server/client TCP connection between my laptop and another computer running the server program. With my client program I am able to send commands to the server to which it reacts. However I do not know what the commands are (I just press a button in the client GUI and the command is sent), so my initial thought was that, maybe I was able to monitor/capture the strings/bytes/integers commands, which is send over the TCP/IP. There are only these two computers on the network, so no problem in other traffic there. FYI, they are connected with a wireless peer-to-peer connection.
My problem comes from the manufature of the software making a crabby manual, so really the commands in the manual, which I was supposed to send with my own TCP vi, are just impossible to understand, and don't get me started with their support :-)
SO, any suggestions if it is possible to capture what is sent over the TCP when I press a button in my client GUI?
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010

Matthew Williams wrote:
Wireshark, http://www.wireshark.org , will capture data off the network and sort/display/categorize.
I don't know how well it will work in a wireless environment, we usually use a wired hub (not switch).
Matt
Hi Matt
I have just tried Wireshark, I get a lot of data, so I just have to use a bit of time figuring out what is what, but good program to monitor the LAN connection also wireless. I can monitor all the packages between the client and server. It looks like there is a bunch of data just from keeping the connection active, but again I have to dig a bit deeper before I can say anymore:-)
MikeS81 wrote:
Hi SCMAJA,
another way is to build your own TCP/IP Server with LabView and receive with it the commands send with your client program.
Mike
Hi Mike
Yeah I tried that right now using the TCP Communicator - Passive example, unfortunately the connection between the client and server is kept alive using some commands, so the only command I can get to read is the connect command, because the client then refuses the connection because there is no "right" answer/repsonse from the server :-(
edit:
I just got in touch with the support, and got some of the commands to work. I had to make some crazy command with a header first, then size and last my command, all converted from DEC to HEX.. Not easy to figure out :-)
Message Edited by SCMAJA on 02-08-2008 04:29 PM
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010

Similar Messages

Differences between GKAPI server and client modes

Cisco Gatekeeper External Interface Reference does not talk much about the server and client modes. Does anyone know the different between these 2 modes?

Hi Krishna,
Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
I hope this helps
Daniel

Design for a semi protocol between a server and client

Hi!
I'm building quite a large client/server application that communicate using Serializable Objects.
There is about 20 actions done between the client and server ranging from
- the client requesting objects from the server
- to the client sending a range of different values to the server.
Does anyone have a design of a protocol that handles a large amount of actions that I could get design ideas off?

Hi!
I'm building quite a large client/server application
that communicate using Serializable Objects.
There is about 20 actions done between the client and
server ranging from
- the client requesting objects from the server
- to the client sending a range of different values to
the server.HOPP / Half-Object plus Protocol / Half-Object part Protocol
This is the pattern EJB's follow.
Does anyone have a design of a protocol that handles a
large amount of actions that I could get design ideas
off?Protocol ? There is SOAP, RTSP, SMTP or HTTP.
To implement a Protocol Handler, checkout the Command & Interpreter Pattern. Command is most useful if you simply know the commands you need to handle, and Interpreter is most useful if you have a grammer you wish to implement.

Connection between sap server and client

I am useing 4.7, I am unable to connect server from a client.
It gives me an message "Partner not reached"
but from the client it is PINGING.

Hi Charles,
Which server is this? which client you are using? is it related to MDM?
Regards,
Mausam

Re: (forte-users) Delays in data transfer..server-to-client

I would try using DOM (distributed object manager) traces. trc:do:20 will
give you information on each messages sent from and received by the
partition. Levels are 1, 2, 5, 7, and 8, and trc:do:*:8 is very
verbose. trc:do:20:1 may tell you what you want to know. trc:do:1:1 will
give you a basic 1-line-per DOM event trace that may also be all you need.
Communications manager traces will tell you about network and socket-level
activity, but not about the sizes of the messages themselves. In addition,
the operating system makes decisions about physical packet size and
send/receive timing, so CM activities only generally map to actual network
activity.
-tdc
iPlanet Integration Server Engineering
At 09:24 AM 5/1/01 -0700, you wrote:
All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in
order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are
requesting
the data size and packet information. I did not see what I am looking for
using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10
flag, but
Forte' indicates that this flag is very verbose, the systems group hates
it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.

Jeff,
If the object you are passing does not require changes made to it in the
server partition to be returned, pass the object as copy input (pass by
value not reference). If it is necessary to pass the object as input, try
to pass only the attributes that are required to the remote partition
instead of the whole object.
Input/Output is normaly used with scalar variables. When a scalar is passed
to a remote partition, if the value is changed in that partition, the value
is not returned to the calling partition unless Input/Output is used.
Input/Output should not be used for object type parameters, if you need to
pass a reference, use Input only. If you can pass by value, use Copy Input.
You will notice a huge difference in performance changing from Input to Copy
input when passing large objects.
Hope this helps,
Travis Foote
Fortedeveloper.com Inc.
----- Original Message -----
From: "Jeff Bennett" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 01, 2001 9:24 AM
Subject: (forte-users) Delays in data transfer.. server-to-client
>
All,
We are experiencing delays in object transfer between server and client.The
delays are longer with large objects (a single object with an array ofobjects
that reflect the rows returned in a database) than small (ie: 10 rows vs400).
>
Does anyone have any (actual) experience using the various Forte' flags inorder
to show the actual size of the object/packets being passed between theserver
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6seconds or
so. The round trip fare however from the time the client makes the SOcall to
the time that it completes is in the 25-30 second range, leaving roughly20-25
seconds unaccounted for. I have brought in the network guys who arerequesting
the data size and packet information. I did not see what I am looking forusing
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10flag, but
Forte' indicates that this flag is very verbose, the systems group hatesit when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Delays in data transfer.. server-to-client

All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are requesting
the data size and packet information. I did not see what I am looking for using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10 flag, but
Forte' indicates that this flag is very verbose, the systems group hates it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff

All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are requesting
the data size and packet information. I did not see what I am looking for using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10 flag, but
Forte' indicates that this flag is very verbose, the systems group hates it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff

ABAP server and client proxies

Dear All,
what is the diff between ABAP server and client proxies?
Regards,
Ashish goyal

Hi Ashish,
Client proxy means proxy in Sender System, and Server Proxy means proxy in Receiver System.
Have a look to the following links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm">ABAP Proxy Runtime</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/frameset.htm">Programming with Client and Server Proxies</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Hope this help
Francesco

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

Tcp data b/w labview and c++

Hi
i am trying to establish TCP connection b/w LABVIEW and C++ program. Server is established in C++ while client is implemented in labview.Although connection is successfully establish b/w server and client, both are unable to correctly understand data send/receive among them. Forexample if i want to send an int type send_array from server, i use standard WINSOCK function "send" like that:
send(AcceptSocket,(char*)send_array,129*4,0);
but when client in labview receive this array, it shows unexpected values.As a client, I used "simple data client.vi" with one modification i.e. as sent data size(129*4 bytes) was fixed, only one TCP read was used .
Same problem exists if i send data from client to server.
Kindly help me
Best Regards
Solved!
Go to Solution.

It's probably an big/little edian problem. If you are using the Flatten/Unflatten from String functions, you can specify which to use.

Replication between Oracle Server and MS SQL Server

Hello,
Does anybody know of a well known or reliable software that can do data replication between Oracle Server and Microsoft SQL server.
I suppose I can write my own version using Heterogenous Services in Oracle but I would like to know if such an automated replication between Oracle and SQL is available commercially.
Thank you.

Viacheslav Ostapenko wrote:
Sorry, Aman,
I couldn't find any info about replication to MS SQL. Is it possible at all? Could you provide link where we can read about this? It could be very interesting.Sorry Viacheslav, even I couldn't find anything for the same. I am not sure that it can be done or not, I haven't heard anyone in my contact doing so. The only place where I have seen Streams being used around me is within Oracle db only. May be someone else can help if he/she has done it.
Aman....

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

Is sql server using trigger to capture change data in SQL server CDC?

hi all,
what is the Architecture of SQL server change data capture(CDC)? is sql server using trigger to capture change data in SQL server CDC? for example Change Data Capture (CDC) in SQL Server 2008 using we can capture change Data records INSERTs, UPDATEs, and
DELETEs applied to SQL Server tables.so my question is SQL server using triggers to capture change data like INSERT TRIGGER, UPDATE TRIGGER and DELETED TRIGGER using each tables after enabled CDC...?
Thanks
Tharindu Dhaneenja
Tharindu Dhaneenja http://dhaneenja.blogspot.com

It is not using triggers. The source is the transaction log.
Related link:
Basics of Change Data Capture
...The source of change data for change data capture is the SQL Server transaction log. As inserts, updates, and deletes are applied to tracked source tables, entries that describe those
changes are added to the log. The log serves as input to the change data capture capture process. This reads the log and adds information about changes to the tracked table’s associated change table. Functions are provided to enumerate
the changes that appear in the change tables over a specified range, returning the information in the form of a filtered result set. The filtered result set is typically used by an application process to update a representation of the source in some external
environment. ...
Kalman Toth, SQL Server & Business Intelligence Training; SQL Server 2008 Training

Communication protocol between Admin Server and Managed Server

Hello - I am hoping someone can help me here to understand the communication protocols used in my setup.
Here is my understanding of the protocol that are used between each component.
End User <--->HTTPS<--->LoadBalancer Device<--->HTTPS<--->Web Server<---->HTTPS<--->WebLogic Server(Managed Server)<--->LDAP/JDBC<-->Data tier components
AdminServer<--->T3<--->Managed Server i.e. The communication protocol between Admin Server and Managed server is T3
The communication protocol between Managed Servers running in one cluster on two seperate machine is What?
Thank you.

Hello, interesting question.
In the documentation " [cluster multicast communication|http://download.oracle.com/docs/cd/E13222_01/wls/docs90/cluster/features.html#1007001] " don't specify the used protocol to pack the information for example in a session replication.
Although in a session replication all objects must be serializable i don't think rmi protocol is used.
I hope some expert give us some light in this issue :-)
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/cluster/features.html#1007001

Kernel Panic while transfering data between MAC HD and network drives

Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report:          1
Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
            dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
         com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet            3.1.3
com.vmware.kext.vmioplug       3.1.3
com.vmware.kext.vmci                3.1.3
com.trendmicro.kext.KERedirect              1.0.0
com.trendmicro.kext.filehook   1.5.0
com.vmware.kext.vmx86            3.1.3
com.thursby.kext.cifs    5.1
com.thursby.kext.NetBIOS         5.1
com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver      1.0.2d2
com.apple.driver.AppleHWSensor           1.9.3d0
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUpstreamUserClient      3.5.7
com.apple.driver.AppleMikeyHIDDriver                1.2.0
com.apple.driver.AppleMCCSControl     1.0.20
com.apple.driver.AppleIntelPenrynProfile           17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver       2.0.5f14
com.apple.kext.ATIFramebuffer              6.3.6
com.apple.driver.AppleBluetoothMultitouch     54.3
com.apple.driver.AppleIntelHDGraphics               6.3.6
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AudioIPCDriver             1.1.6
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleGraphicsControl               2.10.6
com.apple.ATIRadeonX3000       6.3.6
com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros9388   426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.driver.AppleBacklight              170.0.46
com.apple.kext.AppleSMCLMU                1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
com.apple.driver.AppleUSBCardReader                2.6.1
com.apple.driver.AppleIRController        303.8
com.apple.iokit.SCSITaskUserClient        2.6.8
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleUSBHub               4.2.4
com.apple.driver.AppleFWOHCI               4.7.3
com.apple.BootCache   31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort             2.1.7
com.apple.driver.AppleUSBEHCI              4.2.4
com.apple.driver.AppleUSBUHCI             4.2.0
com.apple.driver.AppleACPIButtons      1.3.6
com.apple.driver.AppleRTC        1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
com.apple.security.sandbox       1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall           2.1.12
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction           17
com.apple.driver.AppleProfileTimestampAction               10
com.apple.driver.AppleProfileThreadInfoAction               14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface           74.2
com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
com.apple.iokit.IOSerialFamily   10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
com.apple.driver.AppleMultitouchDriver             207.11
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.AppleSMBusController              1.0.10d0
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.iokit.AppleProfileFamily         41
com.apple.driver.AppleHDAController   2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily      1.10
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI           1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport              2.2
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.AppleThunderboltEDMSink     1.1.1
com.apple.driver.AppleThunderboltEDMSource               1.1.1
com.apple.kext.ATI6000Controller           6.3.6
com.apple.kext.ATISupport        6.3.6
com.apple.iokit.IOGraphicsFamily            2.2
com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
com.apple.driver.AppleUSBHIDKeyboard             141.5
com.apple.driver.AppleHIDKeyboard     141.5
com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
com.apple.iokit.IOBluetoothFamily         2.4.5f3
com.apple.iokit.IOUSBMassStorageClass              2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
com.apple.iokit.IOUSBHIDDriver               4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily        1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter        402.1
com.apple.iokit.IOAHCISerialATAPI         1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
com.apple.driver.AppleThunderboltNHI               1.2.6
com.apple.iokit.IOThunderboltFamily    1.4.9
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOUSBUserClient             4.2.4
com.apple.driver.AppleFileSystemDriver              2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime         1.4.0
com.apple.iokit.IOHIDFamily      1.6.6
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.TMSafetyNet             6
com.apple.kext.AppleMatch      1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily              1.6.3
com.apple.driver.AppleACPIPlatform     1.3.6
com.apple.iokit.IOPCIFamily       2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6

There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

How can I download the data to Application Server and Network Drive

Hi Experts
I am having problem with download the data to Application Server and Network Drive in back ground. its working in foregorund but not in back ground.please suggest me . Thanks for advance.
Thanks & Regards
Raghava

Hi Experts
I am using like this
P_Back is a check box on the selection-screen.
it_fihrst_out-its internal table
sy-batch -Program is running in the background
IF sy-batch IS INITIAL.
    IF p_back = 'X'.
      OPEN DATASET file_01 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        LOOP AT it_fihrst_out.
          TRANSFER it_fihrst_out TO file_01.
        ENDLOOP.
      ENDIF.
      CLOSE DATASET file_01.
      CASE sy-subrc.
        WHEN 0.
          WRITE: / file_01, / 'successfully generated.'.
        WHEN OTHERS.
          WRITE: / file_01, 'Unexpected error occurred.'.
      ENDCASE.
    ELSE.
      CALL FUNCTION 'WS_DOWNLOAD'
        EXPORTING
          filename                = file_01
          filetype                = 'ASC'
        TABLES
          data_tab                = it_fihrst_out
        EXCEPTIONS
          file_open_error         = 1
          file_write_error        = 2
          invalid_filesize        = 3
          invalid_type            = 4
          no_batch                = 5
          unknown_error           = 6
          invalid_table_width     = 7
          gui_refuse_filetransfer = 8
          customer_error          = 9
          OTHERS                  = 10.
      CASE sy-subrc.
        WHEN 0.
          WRITE: / file_01, / 'successfully generated.'.
        WHEN 2.
          WRITE: / file_01, 'Output Error: File still open'.
        WHEN OTHERS.
          WRITE: / file_01, 'Unexpected error occurred.'.
      ENDCASE.
    ENDIF.
ELSE.
    LOOP AT it_fihrst_out.
      WRITE:/ it_fihrst_out.
    ENDLOOP.
ENDIF.
This is the code .

Monitor/capture tcp data between a server and client

Similar Messages

Maybe you are looking for