Monitoring and automating the data upload

Hi experts,
we are using SAP-BW and SEM-BCS
Is it possible in BCS monitor the data upload of a flexible upload or data stream.
Who, when, how many data and from which flat file (if it is a flexible upload) uploads ?
How can i load over a data stream or flexible upload automatically, can i use BW process chains to automate ?
Thanks.

Hi Eugene,
Thanks for your reply for data load automation.
We have SEM-BW 600 Support Package13
can you provide some SAP-help links for monitoring of uploads ?

Similar Messages

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

More detailed documentation of the data upload page set ?

Hallo,
Is there more detailed documentation available of the Upload Wizard and Data Set definitions?
In particular:
Is there a way to skip the Data Mapping part by providing a locally pre-recorded definition of the selected columns and their format, so this step can be skipped for the end user.
The predefined regions: "Data / Table Mapping - Data Upload Column Mapping" is not very transparent.
The bottom line is that I would like to skip this step completely, still leveraging the built in APEX capabilities.
Regards,
- Thomas
Edited by: t-o-b on 17.04.2012 08:29

Hi Thomas,
The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
Regards,
Patrick

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

Schedule job in background and ftp the data to non-sap system

Hello All,
I have a requirement where in i have to write a program(with selection screen) to download 2 files into application server(frequency: end of each day i.e daily at 23:59), and then in turn i need to put those two files into FTP server using FTP script.
i guess my flow of the code should be
1. write the program with selection screen and
2. get the data from corresponding tables and put it into internal tables.
3. then i have download the data into application server
my question is : how i will schedule the job in background to download the data into application server daily? using job_open, job_submit, job_close?
4. then how i need to move the files from application server to FTP server using FTP SCRIPT?
Also my doubt is once i execute the program ONLY, the background job is triigred (because i wrote job_open, job_submit and job_close inside my program). then how will i input the data into screen daily and download the data into application server in background automatically???? i am confused ...
Please help me to solve the above issues
thanks
sangeetha

>
sangeetha s k wrote:
How my data in application server will be transfer to another system using above FM? Because i am not passing application server file path in SAP to that FM. Could you please explain ?
So the path name and the file name are always the same? In that case you could simply create a SM49 entry with hard coded file & path name.
An easy example for the COPY command under WINDOWS OS:
Create a command in SM49 called ZCOPY with following data:
Operating System = Windows NT
OS command: cmd
Parameters for os command: /C copy "C:\tmp\my_file.txt" "z:\tmp\my_file_copy.txt"
Additional parameters allowed: (leave blank)
In this case you would call SXPG_COMMAND_EXECUTE by filling this 2 parameters:
     commandname                  = 'ZCOPY'
     operatingsystem               = 'Windows NT'
In the case that the file name and the path are not fixed you would set the following in the SM49 definition:
Additional parameters allowed: X
In this case you would call SXPG_COMMAND_EXECUTE by filling this 3 parameters:
     commandname                   = 'ZCOPY'
     operatingsystem                = 'Windows NT'
     additional_parameters       = params "<== fill in the path and file name during run time into this variable

How can i re-enable/restore a disabled iPad and keep the data without using a laptop or iCloud

Hello,
Is there a way to re-enable a disabled iPad and maintain the data taking into consideration that no iCloud backup was made and the computer it was last synced with was not available? any idea?

No, sorry. Without a backup in iCloud or iTunes, you will have to set it up as if new and anything on it will be lost now.
You can always re-download purchased apps and content (other than audiobooks) once it is restored, from the respective iTunes or App stores.

Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

The connection of the phone to the monitor would allow you to see, but does not have the ability to translate the touch on the monitor to the phone through that cable.

How can i read the text files and buffer the data in Vector?

hi. I have been running into this problem for days, but with no luck and losing right direction.
The problem is : I am trying to read a text file and buffer the data into a
Queue for each user.
the sample text file is as below:( 1st column is timestamp, 2nd is user_id, 3rd is packet_id, 4th is packet_seqno, 5th is packet_size)
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512
17 8 2 18 512
18 9 2 19 512
19 10 2 20 512
20 1 3 21 512
21 2 3 22 512
22 3 3 23 512
23 4 3 24 512
24 5 3 25 512
25 6 3 26 512
26 7 3 27 512
27 8 3 28 512
28 9 3 29 512
29 10 3 30 512
30 1 4 31 512
31 2 4 32 512
32 3 4 33 512
33 4 4 34 512
34 5 4 35 512
35 6 4 36 512
36 7 4 37 512
37 8 4 38 512
38 9 4 39 512
39 10 4 40 512
40 1 5 41 512
41 2 5 42 512
42 3 5 43 512
43 4 5 44 512
44 5 5 45 512
45 6 5 46 512
46 7 5 47 512
47 8 5 48 512
48 9 5 49 512
49 10 5 50 512
50 1 6 51 512
51 2 6 52 512
52 3 6 53 512
53 4 6 54 512
54 5 6 55 512
55 6 6 56 512
56 7 6 57 512
57 8 6 58 512
58 9 6 59 512
59 10 6 60 512
60 1 7 61 512
61 2 7 62 512
62 3 7 63 512
63 4 7 64 512
64 5 7 65 512
65 6 7 66 512
66 7 7 67 512
67 8 7 68 512
68 9 7 69 512
69 10 7 70 512
70 1 8 71 512
71 2 8 72 512
What I wanna do is to read all the data above and buffer them in a queue for each user( there are only 10 users in total).
I already created a class called Class packet:
public class packet {
    private int timestamp;
    private int user_id;
    private int packet_id;
    private int packet_seqno;
    private int packet_size;
    /** Creates a new instance of packet */
    public packet(int timestamp,int user_id, int packet_id,int packet_seqno, int packet_size)
        this.timestamp = timestamp;
        this.user_id=user_id;
        this.packet_id=packet_id;
        this.packet_seqno=packet_seqno;
        this.packet_size=packet_size;
}then I wanna to create another Class called Class user which I can create a queue for each user (10 users in total) to store type packet information. the queue for each user will be in the order by timestamp.
any idea and sample code will be appreciated.

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

Connecting to SQl server ( MS acess front end) and pull the data into BI

Dear all,
i need to extract the data from SQl server ( MS acess front end) and pull the data into BI .
i need to know what are the steps need to follow on this..
can any one help me on this...!
Thanks,
Siva

Hi,
1. login to sql server u2013 with ur server credentials and connect.
2. select ur sql for ex: sap bw
3. Right click u2013 sapbw - task - export data From sql to excel I m exporting So give sql details
4. Destination u2013 select excel.. and browse where u want to save the fileu2026
5. give next
6. select from which table u want to export
7. click on next
8. click on finish
9. close
10. go to desktop and open the xyz.xls file
11. not make it as csv file and load the data to BI as a flat file
Hope it will help you.
Regards,

How can i open a DOC or TXT file and insert the data into table?

How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.

Use the SQL*Loader utility or the UTL_FILE package.

I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done. Help!

I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done! Help!

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

I can't sync/back up iPhone data to my computer b/c iPhone screen is shattered and i cant unlock it to enter in my passcode. How can I sync my broken iPhone with my computer and back up my data so I can sync and transfer the data to my replacement iPhone?

I can't sync my iPhone and back up my data with my computer because iTunes says to enter the passcode into my iPhone to unlock it, but I am unable to unlock and enter in my passcode on my iPhone because the screen is shattered. I have my replacement iPhone with me and I'm not going to activate it until I can sync/get the data from my broken iPhone. I have the envelope to send my broken iPhone back to the Verizon store or whatever so that's not a problem. I just can't sync my old iPhone with my computer.
Thanks.

No I haven't synced my iPhone with the computer I'm currently using. The computer that I normally sync my iPhone with is being repaired.
I read a nearly identical question to mine (in which you answered) and I found my the answer. Thanks!
Now I have a few more questions: If I mail my broken iPhone to Asurion, will I be able to get my data off of my iPhone once Asurion has it? And what will happen to my old iPhone and the data on it if I activate my replacement iPhone? Will my broken iPhone just become de-activated and will the data be erased or lost or something? Could I still sync it (with the computer ir originally synced with) and back up the data?
Thanks.

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

How to copy and paste the data directly from the excel to the PDF?

hi,
I have found the same question on the link:
How to copy excel sheet to pdf form?
But I didnt get my answer through that forum.
My requirement is dat I should copy the data from excel sheet and directly paste it to PDF form.
When I am trying to copy and paste ..all the data is getting pasted into a single block only.
Kindly help.
Thanks & Regards,
Lina

So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors.

Monitoring and automating the data upload

Similar Messages

Maybe you are looking for