Monitoring IP Gateway Activity hangs workstation and rise Servers CPU utilization 100%

Hi..
I have nw5.1 sp6 and BM 3.7 sp3 with last patches..installed with C.
Johnson's BM Book.
used services/proxies HTTP, FTP ,Generic TCP and Socks
Only one acces rule with indexed logging for denyed URL-s..
all works well except socks gateway sometimes. Sometimes, sometimes with no
reason, if you look real time activity of IP Gateway
(Nwadmin-tools-Bordermanager-IP Gateway) workstation hangs and server CPU
utilization rise to 100%. and only way reboot workstation and reload
proxy.nlm on server..
By the way the same is for Proxy cache monitor...
is any ideas ?
Thanks,
Lab.

May be.. Actually, i have pervasive upgraded to sp4 + postfixes
for other reasons and have some bti.cfg settings changed..
Thanks, i will look in this way..
Lab
BTW, what does -c parameter mean?
> I suspect your btrieve database hasn't been loaded with the optimal
> parameters.
> When loading btrieve make sure that you use the -u=1 -c parameters.
> >
>
>
> --
> Cat
> NSC Volunteer Sysop

Similar Messages

Flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%,Streaming media headache

flash player 11 is very glitchy on ALL browsers and makes my CPU usage 100%, making all youtube and pandora or any streaming media a headache, i have a low-end but good quality Emachine with Windows 7 Sv pk. 1, AMD Athalon Processor 2650e 1.6 GHz 2GB ram 32-bit, which isn't that bad, it used to play HD videos and everything without a skip or lag, it is virus clean, and clean of any large bulky programs, the only thing that went wrong was the fact that the adobe flash updates slowly but surely made it worse, AND it will not let me roll-back to an older version anymore like it used to, so WTF is up? no one seems to have an answer for this, and it seems like ADOBE is doing everything in it's power to not let me ask this question or get it solved, maybe it's because I AM TOO SMART FOR IT AND KNOW IT'S A FAILURE. so please, anyone who actually has a degree in this field is welcome, but no BS anymore, i want answers.
[moved to Flash Player forum]
Message was edited by: sinious

The jump to FP11 was pretty significant with Stage3D. Now Flash Player has a lower level access to your computers GPU to offload playing video and 3d rendering to the GPU. However if your systems GPU isn't up to the task you really won't see that performance gain.
Enter H264 video decoding. A large segment of the Flash usage market is simply viewing video. For sites without fallback in mind (or don't mind software rendering fallback), video may suffer. Using the GPU accelerated video classes may make it difficult for your system to view playback. Disabling hardware acceleration as recommended above would revert you back to software (CPU) decoding to check if your system itself is the issue (and not all the new GPU additions). You did that yet you're still having an issue.
Just to clarify, as I have an eMachine (for accounting), your computer is very much in the "budget" margin. You have a 3 year old single core 1.6ghz AM2 CPU with 512kb of L2. That's the K8 series. This is a very underpowered, single thread loving CPU. Only the most optimized Flash sites and lower end videos (720p or below) should play, but I'm not even sure if they'll "play well". It depends on your GPU.
Also you should know they have an official list of unsupported chipsets and drivers based on many factors. Here's a list for FP11 and AIR3:
http://helpx.adobe.com/x-productkb/multi/stage3d-unsupported-chipsets-drivers-flash.html
Check the bottom of the screen to see what Flash is reporting your rendering mode is. For example, mine states:
Your gpu supports Stage3D in both Baseline and Constrained profile!
Baseline RenderMode:
DirectX9
Constrained RenderMode:
DirectX9 (Baseline Constrained)
This probably won't get better in the future for you. Flash is not a low end multimedia runtime. It does require and utilize high end hardware in a much more reliable way.

Aperture fails to import 10,000 pics - hangs, instead, and takes 200% CPU

Help!
I am an IT professional and a professional photographer. But I have now spent a MONTH!! trying in vain to import my photo library into Aperture on my iMac.
I try to import 10,000 images (the import mode that leaves originals where they are) from my 1 TB firewire drive (bought at Apple store). Result same every time: it imports for hours or days (taking 200% CPU - who writes this malware?) , then hangs up completely.
Apple is no help.. no phone number to be found anywhere. I'll even pay.. this is my work, and I cannot do it.
I have followed maybe 50 threads here and on Google about similar issues and I have done everything that everyone suggests. No difference.
My latest import again halted with the app locking up. Here is what I did:
I bought a 1 TB RAID0 drive at the Apple Store. I copied all my photo shoot directories ove rthere. I emptied Aperture (deleted all projects, restarted). I then started re-importing the images from the new drive (I chose the way that leaves the originals where they are).
So far it has been chugging along all night creating thumbnails. The CPU is 200% used (of which 190% is Aperture). Aperture is completely unresponsive. In fact - Aperture is so unresponsive I am sure it has hung up. Yes, it has - no activity but 200% CPU. Ok, I force quit and now I need to repeat the process again?
This does not seem like good software - certainly not well behaved. I mean, how difficult can it be to import 10,000 images - that is what this software is for. Right? So make the app “nice” 10, already, so I can do other things meanwhile. Or give me a progress bar, with an ETA.
I am willing to learn - not being difficult. I have Googled others’ issues. I have followed instructions. I have tried support (no help there). I ask here.
But should it really take month to import my images? I am very close to throwing this crapware out and getting Lightroom instead.
Ideas welcome. Or an Apple phone number, which Appleseems to be very adept at hiding at all costs. I'll pay for the **** service!!!!!
Michael

Welcome to the forum.
The phone number will be on the AppleCare document that came in your Aperture box, along with an AppleCare ID for your copy of Aperture.
Also, typing 'applecare telephone number' into Google will give you http://www.apple.com/support/contact/phone_contacts.html as the very first result...
I've never imported more than a thousand images at once but have not seen the kind of problems you are describing. What happens if you try importing smaller chunks at a time?
Progress bar - open up the Activity window (Window>Show Activity) to view the progress of all background tasks such as importing & exporting, generation of thumbnails and Previews. You'll also see a 'working' indicator at the bottom of the Viewer or Browser panes, clicking on this will normally bring up the Activity window. Finally, the Project you are importing into will show a pie chart progress indicator instead of it's usual 'filing box' icon.
Ian
P.S. '+(taking 200% CPU - who writes this malware?)+' - if you're an IT pro then you're already aware that apps that are working flat-out and are multi-core aware are going to grab as much of the CPU(s) as possible. 200% and not doing anything is a problem - 200% in itself simply means the app is making full use of the resources available, and RAW decoding is an extremely CPU-intensive task.

Apple TV hangs, crashes and freezes trying to sync photos

I love my Apple TV but it hangs my PC (iTunes pegs CPU at 100%) and crashes my Apple TV box whenever I try to sync "selected" folders from within a directory that has about 324 folders with pictures in each of them. If I only sync one folder and select all, it seems to work. Obviously that's a pain, since I'd like to sync multiple folders.
Any ideas? I have the latest ATV firmware for my 40GB unit (1.1) and iTunes version 7.4.3.1.
Thanks

I'd be suspicious of unsupported file formats and illegal characters such as /

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

Macbook Pro fans constantly running, Safari hangs up and/or crashes often.

My 2012 Macbook Pro (10.9.2, 2 GHz Intel Core i7, 4 GB Memory) has been acting up a lot lately. The fans are constantly running even if major apps (mail, safari, itunes, messages, etc.) are closed. Safari, in particular, has been hanging up and/or crashing recently for no real apparent reason. My battery has been draining out faster than usual. I've always tried to be very cognizant to the health of my computers and phones and try to limit the amount of apps and files I download, sites I visit, etc. I've already done Verify Disk and Verify Disk Permissions in Disk Utility, reset Safari numerous times, disabled all extensions, removed unnecessary apps, and altered settings in Energy Saver, all to no avail. I'm a grad student so I only use my laptop for Safari and Microsoft Word and put it to sleep when not in use as often as possible. Also, my battery was at 56% about 23 minutes ago and is now at 38%.
Below is a list of the processes using the most memory in Activity Monitor:
kernel_task                                   429.4 MB
Safari Web Content                      127.7 MB
com.apple.IconServicesAgent     122.8 MB
WindowServer                              65.6 MB
mds_stores                                   52.1 MB
Safari                                            43.6 MB
CVMComplier                               34.7MB
Memory Used     3.80 GB
Virtual Memory     4.00GB
App Memory          1.34 GB
File Cache          1.45 GB
Wired Memory     998.4 MB
Compressed          332K
Any insight would be greatly appreciated!
Thanks.

plane928,
have you tried resetting your MacBook Pro’s System Management Controller?

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

Server 2012 R2 Remote Desktop Gateway. Most Simple and Secure Design For Small Environment?

We would like users to be able to connect remotely over the Internet from their personal devices to their primary Windows 7 workstation (a physical box on their desk) by using the Microsoft RDP Client For Windows, Mac, iOS and Android. There is no
plan to use RDWeb or Remote Apps, or VDI. Just plain remote access to their desktop PC without VPN plus a third party 2nd factor authentication product that can text them back a code to enter with their AD credentials (AuthAnvil or Duosecurity)
We do not have TMG or ISA.
We would like to get these services all running in a single server and be as simple as possible while still being very secure.
The recommendations I see seem to suggest putting the RDG in a DMZ with either a domain controller on a new domain with a one-way trust to your internal domain or else a read-only domain controller on your domain and then RD Session Host and License server
located on different servers on your internal LAN.
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
That sounds like a lot of separate servers and cost for not a lot of users in our environment.
Do we even need a separate session host server if there are no RDP sessions being hosted directly on the servers because the users are only being redirected to connect to their workstations and will never be using terminal sessions on the server?
Can the RODC or the Domain controller on new domain with the one-way trust be the same server as the Remote Desktop Gateway server and not separate servers?
What is the most minimalist way to set this up with good security when opening all the ports needed to authenticate with internal DC is not secure enough?

#2 sounds like we would need 2 Essentials servers and we will not have that.
We currently have Server 2008 R2 and have 2012 Standard licenses that are not yet used.
We have much more than 75 users total, but 75 is more than the number of users that will probably take advantage of using RD Gateway any time soon. It will probably take time to catch on.
If RD Gateway usage was to get super popular and more than 75 users were depending on access to it, then we could financially justify paying to buy all the CALs needed to run RD Gateway without Essentials. Right now, they are skeptical that it will
be worth spending much money on this and don't want to invest a lot of money up front.
My understanding is that if we have 75 or fewer users using RD Gateway then we need to by no CALs, just apply a Server Standard Edition License to the server, but if we had 76, we would need to turn off Essentials and buy 76 new CALs.
Or would we need to add 50 CALs to the 25 that automatically come with Essentials?
Also does "turning off" Essentials mean we would have to reinstall and redeploy the RDG or is it just a matter of enabling the RD license server and adding purchased CALs?
No, when you buy essentials you get the right to create 25 users that access the server, when you create the 26th user you will need to have 26 CAL and RDS CAL.

Recording and Monitoring stopped working on some CAD and CSD in windows 7 after OS upgrade

Hi All,
Some of our Agents and Supervisors have been migrated to Windows 7 workstations and they no longer appear to be able to use the recording or monitoring facilities.
We are currently using Call Manager System version: 7.1.5, and UCCX System version: 8.0.2
I found a document regarding this about NIC cards on those pcs as below, however this document is old and also its for windows xp
http://www.cisco.com/en/US/prod/voicesw/custcosw/ps5693/ps14/prod_system_requirements0900aecd800e3149.pdf
Could someone please help on this
Thanks

If you are using the Windows 7 64 bit version, CAD/CSD are not supported on that platform. That is becuase the desktop based monitoring and recording are not supported in WoW64 mode, the drivers and associated software modifications are not present. The customer would need to be at CCX 8.5.
(see the footnotes around 64 bit in the compatiblity matrix)
Regards,
Tom

Not able to open active directory user and computer in windows server 2008r2

Hi All techies,
i would like to know one issue which i am facing mostly, i have created 5 virtual machine all with window server2008r2 and one windows 7 on vm-ware now when ever i start my virtual machines everything going rite but when i try to open active directory user/
computer or domain and trust i get a following error "data from active directory user and computers is not available from dc(null) bcoz unspecified error" even when i chk in events log its give me no help, and after 15-30 min everything works good
Please let me know the cause of it and really appreciate it .
Thanks
Atul

You need to ensure that
1. group policy that says "wait for network before logon" is applied to all computers including servers and workstations is applied
2. DNS record exists for all DCs in DNS
3. If there are multiple Domain Controllers in Forests, then they point them as secondary DNS server. This way they will be able to resolve IPs if local DNS server service takes time to start.
As Chris mentioned, you need to start all DCs first, give a time of 5 minutes and then start member servers and workstations for successful logon.
- Sarvesh Goel - Enterprise Messaging Administrator

Route mail and Active Directory Sites and Services configuration

Folks,
I have a problem in the internal email routing. My network is spread across various regions and the branch offices are connected together in a mpls network (full mesh). Every region has its own Exchange Server with all roles installed and the smtp connection
to the outside world is linked to two Exchange servers in the headquarter server farm.
The problem is that internally I often see emails going across the Exchange Servers in the branch offices where there is low bandwidth (from 3 to 5 Mbps), thus email are sent first to these servers instead of going immediately to the Exchange hosting
the mailboxes of the intended recipients. This happens also with inbound emails.
This causes slowness in the email system and sometimes also the network with these branch offices suffers from packet loss or very high latency.
I know that Exchange is a site-aware application and uses the Active Directory topology for message routing and to communicate with the services that are running on other Exchange 2013 computers. For this reason I have checked the Active Directory Sites
and Services and surprisingly I have found that there are no sites, no subnets, nothing has been defined but the default settings, included the Inter-Sites transport which contains the default DEFAULTIPSITELINK.
Apart from the fact that clients use logon servers which are not supposed to use in the far remote offices, I am concerned of changing the Exchange Infrastructure whilst the email system is running and I would like to ask your opinion about my next steps:
1) Create subnets for every office
2) Create sites and then link them to the subnets done in point 1
3) Delete the DEFAULTIPSITELINK and create new site links based on the costs (network speed) in order to determine the best routing server. I have 5 remote offices with 5 different network bandwidth, so I'll have to create 5 IP site links: high cost for
link with slow network, low cost for fast network.
4) (Optional) Configure the Exchange-specific cost using the Set-AdSiteLink cmdlet to the AD IP site links created previously
Apart from the valid questions on why the previous Exchange Administrator have forgotten to set up the Active Directory (Topology) Sites and Services...
...And why have chosen to install all Exchange Roles to each server when there was no reason to do that (there are two servers connected to the external smtp gateways in the headquarter, so in my opinion the Exchange Servers in the remote branch offices
should have had only the mailbox and the cas role)...
As a matter of fact, my idea is to go further and create the sites,subnets and the ip site link. If I still notice a wrong email flow, I can configure an ad-hoc Exchange-specific cost using the Set-AdSiteLink cmdlet. Does this sound reasonable to you guys
or I am taking the wrong decisions?
Thanks

Thank you very much for your link. This is exactly the page I have read just before posting my question here. It is not easy for me to understand why this has been setup this way by a Microsoft certified engineer.
There are specific rules to follow when Active Directory and Exchange are located in multiple sites and I am not a skilled Exchange Administrator... he keeps saying that it is correct and also tells that if I go forward with my ideas there is the
risk to increase the level of complexity. I prefer more complexity than default setting, and as a consequence of that, connectivity problems!
Hopefully everything goes well. I will post my results here once I have done the changes
Regards

Background File Activity Hangs

I've about had it with Dreamweaver because of this one single
problem. If I restart my system and open Dreamweaver, I can work
for a few minutes or an hour, or a few seconds, or a whole day, but
at some point along the way, guaranteed, Background File Activity
hangs during a PUT function or a Save (automatically put) function
and the resulting file on the server corrupts itself and reads a
zero length.
This is particularly annoying because it screws up my site's
styling...GRRRRR.

Just guessing here (I haven't experienced this), but does it help to rebuild your site cache? Site->Recreate Site Cache
Or, commonly these days, follow the steps for removing a corrupted cache file here: http://forums.adobe.com/thread/417116
Note that it may take some time to rebuild the cache if you have a lot of files in your site(s). Perhaps longer if the local files are on a different computer (LAN).
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

Siebel Gateway Active/Active Cluster

Hi, I'd installed before a Siebel gateway in a Active/Passive cluster in the past, but I'm wondering if there is some considerations from the install point of view and if it's supported by Oracle.
It's supposed to use Sun Cluster Software to build the cluster
Regards.

The official answer is no: Active/Active Siebel Server Installation [ID 879472.1]
For Siebel 8 the Gateway hardly acts as a Gateway anymore.
Clients connecting are routed directly by the webserver without any action from the Gateway.
Well, I think the Gateway is still responsible for User Preferences and Siebel Server Configuration, but it doesn't prohibit users from connecting.
You can see this by shutting down the Gateway in a running (test) Siebel 8 environment and try to connect.
You do need the Gateway when you want to start a Siebel Application Server.
For Siebel 8 you won't need big servers for the Gateway.
So I don't think you are going to gain much from pursuing an Active/Active setup.
And as the document points out the sizing will probably be the same for Active/Passive and Active/Active.

A lot of hang-ups and disconnected WRT120N in all installations with multiples Wireless Routers

i'm so tired, i have a lot of installations (school, university,..) that have various WRT120N (4,6,8,12,...) all routers have the latest (no is very new) firmware 1.0.0.4 build2, and in a installation all routers have the same SSID and diferents channel.
Every day all routers hang-up and the user need to stop and start every router.When a router hang-up this can't receive any ping, telnet,web,... across the wired LAN (ping timeout) but all links seem correctly and SSID is published.
I try another brand in this scenario and work fine.
I try to chat with linksys support but is'nt possible, nobody know my problem ?

Sorry I missed the Access Points description - I'm wondering - because there are so many routers - if there may be an issue with the channels and wireless overlap. One IEEE 802.11 "N" can typically communicate within a radius of 70m indoors 250m outdoors. However, the actual range of communication can vary significantly, depending on such variables as indoor or outdoor placement, height above ground, nearby obstructions, other electronic devices that might actively interfere with the signal by broadcasting on the same frequency, type of antenna, the current weather, operating radio frequency, and the power output of devices. I'm thinking that you will have to separate the channels on these ... I don't know for sure why the other routers worked - maybe only one was changed at a time instead of all the routers in the whole network ... at any rate if you have overlap on frequencies there may be something there ... especially when using these as AP's. I believe this router has the ability to change frequencies in the the advanced wireless settings under the wireless tab.
Just shooting from the hip here.
Bill

Monitoring IP Gateway Activity hangs workstation and rise Servers CPU utilization 100%

Similar Messages

Maybe you are looking for