Month Calendar not working in a sub-vi. Anyone know why?

I am trying to develop a program that has a calendar so they can pick the date. I am using the Month Calendar .net control. It works until I put it in a sub-vi. When I run the main vi it loads the sub-vi, but the calendar disappears. Then I go to the back panel and right-click>show control, and it still doesn't come up. Anyone have any ideas?
Also I want to close to sub vi when they click on the date. Which event trigger do I use, or is there a property node for date selection?
Any help would be great?

It didn't work. When I run it a couple times it still just goes away. I was getting .net errors as well but i just ran the error wires and cleared them. I have attached the code as well. I have the calendar as a custom control becuase someone other post said this would clear errors when dropping property nodes.
Attachments:
Get Date from Calendar.vi ‏19 KB
Calendar New.ctl ‏6 KB
Select Calendar.vi ‏11 KB

Similar Messages

  • The autofill feature worked on my iPad 2, but not on the New iPad. Anyone know why?

    The autofill feature worked on my iPad 2, but not on the New iPad. Anyone know why?

    Go to Settings>Safari>Auto Fill>On .... Names and Passwords>On .... Use Contact Info>On. Make sure that your contact information is correct.
    Then quit Settings and Safari completely and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    See if that helps.

  • I am trying to upgrade my Creative Suite 5 to Creative Cloud but am being told that I do not qualify for the upgrade, does anyone know why?

    I am trying to upgrade my Creative Suite 5 to Creative Cloud but am being told that I do not qualify for the upgrade, does anyone know why?

    If you have the Education version you do not qualify due to the LARGE Education discount

  • I am using DVD Studio Pro to create a DVD. The assets total about 2.4GBs using a 4.7 GB disc I still get the error " not enough space on disc" Does anyone know why?

    I am using DVD Studio Pro to create a DVD. The assets total about 2.4GBs using a 4.7 GB disc I still get the error " not enough space on disc" Does anyone know why?

    Start by using this to make sure your assets really fit on the disk:
    http://www.kenstone.net/fcp_homepage/bit_budget.html

  • Flash sites does not work on iphone safari Can anyone know the alternative

    Hi
    My name i zain and i am from pakistan .i have iphone 3gs with 5.1 version .iphone is awesome but one main problem which is arising is that iphone doesnot support flash sites . I am student of ACCA so for my studies i have to take online lectures but when i try to open the video on that flash sites it doesnot work.
    Please its my request tellme how to install flash player as i badly needed it.

    but flash videos doesnot play in full screen mode in puffin .. i am trying to open it in full screen but it's not working .
    opentuition.com is the site . please tell me the method by which i can open the site in full screen mode .

  • When I close firefox (version 10, the newest one as of 3-10-12) acrobat reader 5.0 opens. I do not want this to happen. Anyone know why it does that, or how to stop it?

    I just upgraded firefox to the new version 10.
    I may soon downgrade back to 9, because it looks too much like crome *barf*
    That's not my issue.
    When I close firefox, acrobat reader 5.0 starts.
    I do not want this to happen.
    Is this some virus? something in firefox?
    How do I stop this from happening?

    Acrobat Reader 5 is very ancient, so I would try uninstalling it (and any other older versions of Reader), then going to [http://get.adobe.com/reader/ http://get.adobe.com/reader/], downloading and installing that. Then, see if you still have the issue

  • IOS7 - After taking a photo the lock screen zooms in and I can not enter my password. Does anyone know why?

    Everytime I take a photo on my phone either when it is locked or not, when I come back to my phone to use it next the lock screen has zoomed in and I can not enter my password. I have to either switch the phone off or keep playing with the side button. Its only happened since iOS7 has been installed. Can anyone help?

    On the Home screen, double-tap with three fingers to exit zoom.
    Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
    http://support.apple.com/kb/ts3129

  • I am all of a sudden not receiving photos in text form, anyone know why

    People are trying to send me pictures through iMessage and they are not going through on my end. It is not just happening from one person. Both people trying to send are using iPhones but one is verizon and one is AT&T. Not sure if one of my settings needs adjustment or what??

    Make sure you're connected to the internet of course if you both are using imessage. If you're attepting to send images via text, it requires your data to be on.
    Blue bubbles: iMessage (wifi)
    Green Bubbles: Text (data)

  • After updating Firefox today I can no longer enlarge or shrink the screen with two fingers on my MacBook Pro touch pad. The feature still works on antother browser. Anyone know why?

    Can no longer enlarge or shrink the screen.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.latched -> <b>false</b>
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • My L series 16-35mm F2.8 will autofocus in A+ but not in any other mode does anyone know why? Thx

    5d mark iii
    Solved!
    Go to Solution.

    Petal1007,
    There are Custom Controls in the camera that change what certain controls do, even the shutter button.  It is very likely a setting was changed.  Please do the following:
    Press MENU.
    Select the [Custom Functions #2] tab.
    Select [Custom Controls].
    Press the <TRASH CAN> button to cancel all Custom Control settings.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Javascript is not working in Safari on my iPad, version 6.1.3. Anyone know why?

    I have an iPad with os version 6.1.3.  Javascript on websites is not working in Safari. Does anyone know why? How can I correct this situation?

    It is jquery libraries that are not functioning properly and some of the html.  I have Javascript turned on.  The website was working in Safari.  I tested it in Safari and I viewed it many times using Safari and it worked.  I went on to it on 5/8/13 and the javascript/jquery portion and parts of the html are not working.  It had been tested about 4 or 5 months ago in several diffierent versions of IE, Chrome, Mozilla and Safari. 
    Thanks for responding to my question

  • Its not letting me make an online reservation, anyone know why?

    apple online is not letting me make a reservation, anyone know why?

    What do you mean, exactly? What kind of "online reservation". What do you mean by "Apple online"?
    Can you be a little more specific about what you are trying to do, and what is preventing you from doing it?
    Cheers,
    GB

  • PC iCloud calendar not working

    I had to install a new hard drive on my computer. After I finished programming the new hard drive my iCloud calendar doesn't open.  I get this error message:
    iCloud calendar could not complete the operation due to error 8e5e0247.  I am using windows 7 on my computer.
    The calendar works fine on my iPad.  Any answers?
    Thank you

    Does anyone know why this would be?

  • A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    The beeps could be caused by something as simple as a loose internal wire or connection.  If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
    If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

  • I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    A reply to similar question (Q & As , in product page Apple Store) says:
    "...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it."  Answered by Enrique T from Lima Oct  25 2013.
    If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
    You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
    Hopefully this helps.
    Good luck & happy computing!

Maybe you are looking for

  • Mouse pointer trembling - urgent!

    The pointer suddenly started shaking and trembling in a random-walk-like fashion. It happens with or without my external mouse connected, and with or without the system set to "Ignore trackpad when mouse is present". Any ideas? Thanks in advance!

  • Using login credentials from the first page

    Hi guys hopw one of you will help me!! I a jsp page which takes the username and password.(this is login.jsp) If the login is successful the page enters into another jsp which has a list of what the user wants to do. Everything is working fine at tht

  • Analyze option in metalogging is missing.. I am unable to transcribe

    Can anybody please help me here? I cannot transcribe an audio file just because i am unable to find the analyze option which is missing in Analysis text.. It was supposed to be at the bottom but it is not !

  • Activity rate is changing in every period

    Hi Gurus , I am facing problem when we are using KP26 there we have given activity rate for the first time from period 1 to 6 as usd 1/min and for period 1 to 7 same figure usd 1/ min . but when i go back and see activity rate for period 1 to 6 it is

  • UITableViewCell identifiers? What exactly do they identify?

    I'm just learning how to implement UITableViewControllers to control UITableViews with the iPhone SDK. I understand that it is common to use a method called dequeueReusableCellWithIdentifier: on a UITableViewCell instance that is passed a string that