Month_ending and Year_ending....

Hi Guys; In a report i need to show the following 3 columns:
If: date_column is between 3/01/2005 and 3/12/2008 then my
1) 'week_ending: ' Column should display values;
3/5/2005,
3/12/2005
.....upto
3/15/2008
2) 'Month_ending: ' Column should display values:
5/2005,
6/2005
.....upto
3/2008
and
3) 'Year_ending' column should display values:
2005,
2006,
2007 and
2008
I think i can get
1) by using SELECT TRUNC(date_column , 'W')+7
but how to get the Month_ending column and Year_ending Column values.
Please help.
Thanks
Message was edited by:
user521009

to_char( date_column, 'MM/YYYY')
to_char( date_column, 'YYYY')
null

Similar Messages

Resource Manager Understanding

Hi DBA,
While going through the documents of Oracle Resource Manager , I have a Resource Plan execution can be based on CPU or Forcefully. Means Once the CPU utilization reaches 100% only then resource plan comes into the picture or we can forced it even it is not 100%.
My doubt is if I allocate a 100% CPU to resource manager plan by creating the consumer group and we are forcing that resource plan,
If some other application is running on the servers what will be impact on that application, does that application get the CPU.What will the impact on internal system processing (Kernels). How the CPU is going to be distributed ?
I understand that 100% CPU utilization on a server is different thing and that causes the performance issue.
Regards
Sourabh Gupta

Hi,
During the month end activity , In our Project CPU and IO utilization increases( Almost Doubled) , since some reports required by business fired.
We want to implement resource plan for that users.
Suppose I create two Consumer group Full_MONTH and Month_end and create a plan.
If I assign 80% CPU to full_month consumer and 20% to Month_end Consumer and forcing this plan to run as mentioned yesterday .
So I want to understand if I implement above plan in the Resource Manager , What will be the impact on Other application and Server Processing.
Since I forcing to Give 100% CPU to my resource manager plan.
Thanks and Regards
Sourabh Gupta

Selecting records based on month and year parameters

Hi. I have a sql 2008 r2 stored procedure which needs modifying to return the data based on a start / end month and year.
It's a large SP so I'll summarise - It accepts four parameters:
@StartMonth NVARCHAR(10)
@StartYear NVARCHAR(4)
@EndMonth NVARCHAR(10)
@EndYear NVARCHAR(4)
The current WHERE clause is:
WHERE ta.TimeByDay BETWEEN '01' + '-' + ltrim(LEFT(@StartMonth, 3)) + '-' + @StartYear
AND convert(nvarchar,datediff(day, ta.TimeByDay, dateadd(month, 1, ta.TimeByDay))) + '-' + ltrim(LEFT(@EndMonth, 3)) + '-' + @EndYear
Example of input parameters:
@StartMonth = N'January',
@StartYear = N'2014',
@EndMonth = N'February',
@EndYear = N'2014',
Result:
The conversion of a nvarchar data type to a datetime data type resulted in an out-of-range value.
(1 row(s) affected)
However it executes correctly if we do either of the following:
1) Run the SQL direct in QA and type in January and February rather than passing in the Start/End Month parameters
2) As you can see we use the following datediff call to get the number of days per month. IF I replace this with '28', or '31' for example the query also runs (oddly number 1 above then also runs by executing the SP):
convert(nvarchar,datediff(day, ta.TimeByDay, dateadd(month, 1, ta.TimeByDay)))
How do I update the WHERE clause to return records between a start/end month and year?
I'm a day on this so any help appreciated.
Thanks

create function NthDayOfMonth (@year int, @month smallint, @weekday varchar(15), @nth smallint)
returns datetime
as
begin
declare @the_date datetime, @c_date datetime, @cth smallint
set @cth = 0
set @c_date = convert(varchar,@year)+'-'+convert(varchar,@month)+'-01'
while month(@c_date) = @month
begin
if datename(weekday,@c_date) = @weekday set @cth = @cth + 1
if @cth = @nth and datename(weekday,@c_date) = @weekday set @the_date = @c_date
set @c_date = dateadd(day,1,@c_date)
end
return @the_date
end
go
create function Dates(@date datetime)
returns @table table
now datetime,
today datetime,
Month_start datetime,
Month_end datetime,
Prev_Month_Start datetime,
Prev_Month_End datetime,
Week_Start datetime,
Week_End datetime,
Prev_Week_Start datetime,
Prev_Week_End datetime,
Quarter_Start datetime,
Quarter_End datetime,
Prev_Quarter_Start datetime,
Prev_Quarter_End datetime,
Year_Start datetime,
Year_End datetime,
Prev_Year_Start datetime,
Prev_Year_End datetime,
Month_End_TS datetime,
Prev_Month_End_TS datetime,
Week_End_TS datetime,
Prev_Week_End_TS datetime,
Quarter_End_TS datetime,
Prev_Quarter_End_TS datetime,
Year_End_TS datetime,
Prev_Year_End_TS datetime,
Year smallint,
Month smallint,
Day smallint,
Month_Name varchar(15),
Day_Name varchar(15),
WD smallint
as
begin
if @date IS NULL set @date = getdate()
insert into @table
select
@date as now,
convert(datetime,convert(varchar,@date,101)) as today,
dateadd(day,0-day(@date)+1,convert(datetime,convert(varchar,@date,101))) as Month_Start,
dateadd(day,-1,dateadd(month,1,dateadd(day,0-day(@date)+1,convert(datetime,convert(varchar,@date,101))))) as Month_end,
dateadd(month,-1,dateadd(day,0-day(@date)+1,convert(datetime,convert(varchar,@date,101)))) as Prev_Month_start,
dateadd(day,-1-day(@date)+1,convert(datetime,convert(varchar,@date,101))) as Prev_Month_End,
dateadd(day,1-datepart(dw,@date),convert(datetime,convert(varchar,@date,101))) as Week_Start,
dateadd(day,7-datepart(dw,@date),convert(datetime,convert(varchar,@date,101))) as Week_End,
dateadd(day,-6-datepart(dw,@date),convert(datetime,convert(varchar,@date,101))) as Prev_Week_Start,
dateadd(day,0-datepart(dw,@date),convert(datetime,convert(varchar,@date,101))) as Prev_Week_End,
convert(datetime,convert(varchar,year(@date)) +'-'+ right('0'+convert(varchar,((datepart(QUARTER,@date)-1)*3)+1),2)+'-01') as quarter_start,
dateadd(day,-1,dateadd(quarter,1,convert(datetime,convert(varchar,year(@date)) +'-'+ right('0'+convert(varchar,((datepart(QUARTER,@date)-1)*3)+1),2)+'-01'))) as quarter_end,
convert(datetime,convert(varchar,year(dateadd(quarter,-1,@date))) +'-'+ right('0'+convert(varchar,((datepart(QUARTER,dateadd(quarter,-1,@date))-1)*3)+1),2)+'-01') as prev_quarter_start,
dateadd(day,-1,dateadd(quarter,1,convert(datetime,convert(varchar,year(dateadd(quarter,-1,@date))) +'-'+ right('0'+convert(varchar,((datepart(QUARTER,dateadd(quarter,-1,@date))-1)*3)+1),2)+'-01'))) as prev_quarter_end,
dateadd(day,1-day(@date),dateadd(month,1-month(@date),convert(varchar,@date,101))) as Year_Start,
dateadd(year,1,dateadd(day,0-day(@date),dateadd(month,1-month(@date),convert(varchar,@date,101)))) as Year_End,
dateadd(year,-1,dateadd(day,1-day(@date),dateadd(month,1-month(@date),convert(varchar,@date,101)))) as Prev_Year_Start,
dateadd(year,-1,dateadd(year,1,dateadd(day,0-day(@date),dateadd(month,1-month(@date),convert(varchar,@date,101))))) as Prev_Year_End,
dateadd(ms,-3,dateadd(day,0,dateadd(month,1,dateadd(day,0-day(@date)+1,convert(datetime,convert(varchar,@date,101)))))) as Month_End_Ts,
dateadd(ms,-3,dateadd(day,-1-day(@date)+2,convert(datetime,convert(varchar,@date,101)))) as Prev_Month_End_TS,
dateadd(ms,-3,dateadd(day,8-datepart(dw,@date),convert(datetime,convert(varchar,@date,101)))) as Week_End_TS,
dateadd(ms,-3,dateadd(day,1-datepart(dw,@date),convert(datetime,convert(varchar,@date,101)))) as Prev_Week_End_TS,
dateadd(ms,-3,dateadd(day,0,dateadd(quarter,1,convert(datetime,convert(varchar,year(@date)) +'-'+ right('0'+convert(varchar,((datepart(QUARTER,@date)-1)*3)+1),2)+'-01')))) as quarter_end_TS,
dateadd(ms,-3,dateadd(day,0,dateadd(quarter,1,convert(datetime,convert(varchar,year(dateadd(quarter,-1,@date))) +'-'+ right('0'+convert(varchar,((datepart(QUARTER,dateadd(quarter,-1,@date))-1)*3)+1),2)+'-01')))) as prev_quarter_end_TS,
dateadd(ms,-3,dateadd(year,1,dateadd(day,1-day(@date),dateadd(month,1-month(@date),convert(varchar,@date,101))))) as Year_End_TS,
dateadd(ms,-3,dateadd(day,1-day(@date),dateadd(month,1-month(@date),convert(varchar,@date,101)))) as Prev_Year_End_TS,
Year(@date) as Year,
Month(@date) as Month,
Day(@Date) as Day,
datename(month,@Date) as Month_Name,
datename(WEEKDAY,@date) as Day_Name,
datepart(weekday,@date) as WD
return
end
go
create function Holidays(@year smallint)
returns @table table
date datetime,
type varchar(10),
name varchar(25)
as
begin
insert into @table
select convert(datetime,convert(varchar,@year)+'-01-01') as date,'Holiday' as type ,'New Years Day' as name UNION ALL
select dbo.NthDayOfMonth(@year,2, 'Monday',3),'Holiday','Family Day' UNION ALL
select dateadd(d,0-case when datepart(weekday,convert(varchar,@year)+'-05-25') in (1,2) then 5+datepart(weekday,convert(varchar,@year)+'-05-25') else datepart(weekday,convert(varchar,@year)+'-05-25')-1 end, convert(varchar,@year)+'-05-25') ,'Holiday','Victoria Day' UNION ALL
select convert(varchar,@year)+'-01-07' ,'Holiday','Canada Day' UNION ALL
select dbo.NthDayOfMonth(@year,8, 'Monday',1),'Holiday','Civic Holiday' UNION ALL
select dbo.NthDayOfMonth(@year,9, 'Monday',1),'Holiday','Labour Day' UNION ALL
select dbo.NthDayofMonth(@year,10,'Monday',2),'Holiday','Thanksgiving' UNION ALL
select convert(varchar,@year)+'-11-11' ,'Holiday','Rememberance Day'UNION ALL
select convert(varchar,@year)+'-12-25' ,'Holiday','Christmas Day' UNION ALL
select convert(varchar,@year)+'-12-26' ,'Holiday','Boxing Day'
update @table
set date =
case when name != 'Boxing Day' and datepart(weekday,date) = 7 then dateadd(day,2,date)
when name != 'Boxing Day' and datepart(weekday,date) = 1 then dateadd(day,1,date)
when name = 'Boxing Day' and datepart(weekday,date) = 7 then dateadd(day,2,date)
when name = 'Boxing Day' and datepart(weekday,date) = 1 then dateadd(day,2,date)
when name = 'Boxing Day' and datepart(weekday,date) = 2 then dateadd(day,1,date)
else date
end
return
end
go
Using these functions (in place of a calendar table) you could do something like this:
DECLARE @forumTable TABLE (sales MONEY, saleDate DATE)
INSERT INTO @forumTable (sales, saleDate)
VALUES
(123.45, '2014-01-05'),(678.90, '2014-01-06'),(111.21, '2014-01-07'),(314.15, '2014-01-08'),(161.71, '2014-01-09'),
(819.20, '2014-02-05'),(212.22, '2014-02-06'),(324.25, '2014-02-07'),(262.72, '2014-02-08'),(829.30, '2014-02-09')
SELECT SUM(f.sales), d.month_end
FROM @forumTable f
CROSS APPLY sandbox.dbo.dates(f.saleDate) d
GROUP BY d.month_end

A problem with Threads and loops.

Hi, I have some code that needs to be constantly running, like while(true)
      //code here
}However, the code just checks to see if the user has input anything (and then if the user has, it goes to do some other stuff) so I don't need it constantly running and hogging up 98% of the CPU. So I made my class (which has the method that needs to be looped, call it ClassA) implement Runnable. Then I just added the method which needed to be looped into the public void run()
I have another class which creates an instance of the above class (call it ClassB), and the main(String[] args) is in there.
public static void main(String[] args)
          ClassA test = new ClassA();
          Thread thread = new Thread(test.getInstanceOfClassA());
          thread.start();
          while(true)
                       //I do not know what to put here
               try
                    thread.sleep(100);
               catch(InterruptedException iex)
     }However, the thread only calls run() once,(duh...) but I can't think of away to get it to run - sleep - run -sleep forever. Can someone help me?

Hi, I have some code that needs to be constantly
running, like while(true)
//code here
}However, the code just checks to see if the user has
input anything (and then if the user has, it goes to
do some other stuff) so I don't need it constantly
running and hogging up 98% of the CPU. Where does the user input come from. Are you reading from an InputStream? If so, then your loop will be blocked anyway when reading from the InputStream until data is available. During that time, the loop will not consume processor cycles.
public static void main(String[] args)
          ClassA test = new ClassA();
Thread thread = new Thread(test.getInstanceOfClassA());I have never seen this idiom. If ClassA instanceof Runnable, you simply write new Thread(test).
          thread.start();
          while(true)
//I do not know what to put
do not know what to put here
               try
                    thread.sleep(100);
               catch(InterruptedException iex)
     }However, the thread only calls run() once,(duh...)Yeah, why would you want to call it more than once given that you have an infinite loop in ClassA.run()?
Harald.
Java Text Crunching: http://www.ebi.ac.uk/Rebholz-srv/whatizit/software

A problem with Threads and MMapi

I am tring to execute a class based on Game canvas.
The problem begin when I try to Play both a MIDI tone and to run an infinit Thread loop.
The MIDI tone "Stammers".
How to over come the problem?
Thanks in advance
Kobi
See Code example below:
import java.io.IOException;
import java.io.InputStream;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
import javax.microedition.lcdui.game.GameCanvas;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
public class MainScreenCanvas extends GameCanvas implements Runnable {
     private MainMIDlet parent;
     private boolean mTrucking = false;
     Image imgBackgound = null;
     int imgBackgoundX = 0, imgBackgoundY = 0;
     Player player;
     public MainScreenCanvas(MainMIDlet parent)
          super(true);
          this.parent = parent;
          try
               imgBackgound = Image.createImage("/images/area03_bkg0.png");
               imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
               imgBackgoundY = this.getHeight() - imgBackgound.getHeight();
          catch(Exception e)
               System.out.println(e.getMessage());
      * starts thread
     public void start()
          mTrucking = true;
          Thread t = new Thread(this);
          t.start();
      * stops thread
     public void stop()
          mTrucking = false;
     public void play()
          try
               InputStream is = getClass().getResourceAsStream("/sounds/scale.mid");
               player = Manager.createPlayer(is, "audio/midi");
               player.setLoopCount(-1);
               player.prefetch();
               player.start();
          catch(Exception e)
               System.out.println(e.getMessage());
     public void run()
          Graphics g = getGraphics();
          play();
          while (true)
               tick();
               input();
               render(g);
      * responsible for object movements
     private void tick()
      * response to key input
     private void input()
          int keyStates = getKeyStates();
          if ((keyStates & LEFT_PRESSED) != 0)
               imgBackgoundX++;
               if (imgBackgoundX > 0)
                    imgBackgoundX = 0;
          if ((keyStates & RIGHT_PRESSED) != 0)
               imgBackgoundX--;
               if (imgBackgoundX < this.getWidth() - imgBackgound.getWidth())
                    imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
      * Responsible for the drawing
      * @param g
     private void render(Graphics g)
          g.drawImage(imgBackgound, imgBackgoundX, imgBackgoundY, Graphics.TOP | Graphics.LEFT);
          this.flushGraphics();
}

You can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
Regds,
SD
N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with Threads and "plase wait..."-Window

Hi everyone,
I have a problem that I'm not able to solve in any way... I have a time-consuming task (a file decryption) which I execute in a separate thread; I've used the SwingWorker class, like suggested by sun-tutorial, and it works right. The problem is that I have to wait that the decryption have finished before continuing with program-execution. Therefore I would like to display a "please wait"-window while the task runs. I've tryed all the possible ways I know but the problem is always the same: the waitWindow is displayed empty, the bounds are painted but the contents no; it's only painted when the decrypt-task has finished. Please help me, I have no more resources....
decrypt-file code:
public class DecryptFile {
private String cryptedFileNameAndPath;
private ByteArrayInputStream resultStream = null;
// need for progress
private int lengthOfTask;
private int current = -1;
private String statMessage;
public DecryptFile(String encZipFileNameAndPath) {
    cryptedFileNameAndPath = encZipFileNameAndPath;
    //Compute length of task...
    // 0 for indeterminate
    lengthOfTask = 0;
public ByteArrayInputStream getDecryptedInputStream() {
    return this.resultStream;
   * Called from ProgressBarDemo to start the task.
public void go() {
    current = -1;
    final SwingWorker worker = new SwingWorker() {
      public Object construct() {
        return new ActualTask();
    worker.start();
   * Called from ProgressBarDemo to find out how much work needs
   * to be done.
public int getLengthOfTask() {
    return lengthOfTask;
   * Called from ProgressBarDemo to find out how much has been done.
public int getCurrent() {
    return current;
public void stop() {
    current = lengthOfTask;
   * Called from ProgressBarDemo to find out if the task has completed.
public boolean done() {
    if (current >= lengthOfTask)
      return true;
    else
      return false;
public String getMessage() {
    return statMessage;
   * The actual long running task. This runs in a SwingWorker thread.
class ActualTask {
    ActualTask () {
      current = -1;
      statMessage = "";
      resultStream = AIUtil.getInputStreamFromEncZip(cryptedFileNameAndPath); //here the decryption happens
      current = 0;
      statMessage = "";
}The code that calls decryption and displays waitWindow
      final WaitSplash wS = new WaitSplash("Please wait...");
      final DecryptFile cryptedTemplate = new DecryptFile (this.templateFile);
      cryptedTemplate.go();
      while (! cryptedTemplate.done()) {
        try {
          wait();
        } catch (Exception e) { }
      this.templateInputStream = cryptedTemplate.getDecryptedInputStream();
      wS.close();Thanks, thanks, thanks in advance!
Edoardo

Maybe you can try setting the priority of the long-running thread to be lower? so that the UI will be more responsive...

Problem with threads and graphics

I have a thread that chooses paths for a Travelling salesman problem, it then calls a TSPdraw class and passes it the path, which the class then draws. the problem is when i have two threads it creates two windows but only draws a path in one of them. any ideas where i`m going wrong

Are you using swing components? Swing isn't threadsafe. If you have multiple threads that want to update your UI you need to use the SwingUtilities.invokeLater(...)or invokeAndWait(...). There is a page in the swing tutorial about this at: http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html

Problem with threads and ProgressMonitor

Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?

Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating

Problem with threads and/or memory

I'm developing an application where there are 3 threads. One of them sends a request to the other, and if the 2nd can't answer it, it sends it to the 3rd (similar to CPU -> CACHE -> MEMORY). When i run the program with 1000-10.000 requests, no problem occurs. When i run it with 300.000-1.000.000 requests, it sometimes hangs. Is this a problem with the garbage collector, or should it be related to the threads mecanism.
(note: eache thread is in execution using a finite state machine)

i had been running the program inside Netbeans.
Running the jar using the command line outside
Netbeans i have no more problems... Does Netbeans use
it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses.

Null And " "

What is the difference between these two lines of codes?
String currentFile = null;
String currentFile = "";
Edited by: AMARSHI on Jul 10, 2008 7:07 AM

The reference variable itself, takes up the same amount of space, of course, as all references are the same size. Now, the object on the heap is a different story. With null there isn't one, of course (or if there is there is only one for the entire VM), and for the second a String object will be created in the String pool (once again, only one for the entire VM that every = "" assignment will use). But really, what difference does it make? If there is a difference, it is on the order of a few bytes (at max) for the entire VM, and if this is a concern, your probably doing something else greviously wrong. This miniscule difference should not concern you.
Edit: And "nulling" variables to "save" memory is also not something you should be concerned with. Either the variable will go out of scope and the object garbage collected anyway, or it's in constant use and so will not be taking up any extraneous heap space. If one of those is not the case, you are, once again, doing something greviously wrong.

And/or if statement in rtf templates.

Hi all,
I'm using XML Publisher 4.5.
I have created a word template file (rtf) for my reports. I need to be able to show some content in the template file by using and and/or if statement.
fx. <?if:doc_type='STANDARD'?> OR <?if:doc_type='DEFAULT'?>
How can I do this?
In advance thank you.
Best regards
Kenneth

Hi D,
Thank you for your answer.
I have seriously thought about that solution; but I don't think it's a smart way to do it.
If i do it like that, i need to copy the whole table and paste it inside the if statements.
I have two xml elements that I need to make the decisions on. POH_PO_TYPE & CP_RELEASE_NUM.
POH_PO_TYPE can be: STANDARD, RELEASE or BLANKET.
CP_RELEASE_NUM can be: '' or N
If POH_PO_TYPE is RELEASE AND CP_RELEASE_NUM is not ''
OR POH_PO_TYPE is STANDARD
OR POH_PO_TYPE is BLANKET AND CP_RELEASE_NUM is ''
THEN show table (which contains the whole PO).
It shall show the content of the PO in any of these cases.
BR Kenneth

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

Open and cancelled Quote Report

Hi,
Can anyone give me the information for getting open and cancelled Quote Report?

I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
Regards,
GSL.

Cannot open and update IPhoto after upgrading to OXYosemite

From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
What should I do?
Thanks, Sev

I have the same problem and can't find out how to correct it. Unable to update iPhoto or iMovie .. I get the same message as above user. Help!

Month_ending and Year_ending....

Similar Messages

Maybe you are looking for