More than one correct target in Drag and Drop

Can an object have more than one correct target in a drag and drop? I have a question: Balance cost with _________ and ___________. The correct answers are interchangable. It doesn't matter which goes in which blank. Is it possible to tell Captivate that either would be a correct answer?

Unfortunately, no. I need to be able to drag sources to both targets. I
have two sources and two targets. It doesn't matter which source goes
into which target for this statement. So I need it to be correct no
matter which order the learner puts the answers.
Shekhar_Dhiman <mailto:[email protected]>
Tuesday, May 07, 2013 4:49 PM
>
Re: More than one correct target in Drag and Drop
created by Shekhar_Dhiman
<http://forums.adobe.com/people/Shekhar_Dhiman> in /Adobe Captivate/ -
View the full discussion
<http://forums.adobe.com/message/5298955#5298955

Similar Messages

My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

How to open more than one RAW-File by drag&drop/doubleclick with CS2?

Hello,
is it possible to open more than one RAW-file from iPhoto with Photoshop's RAW-converter in just one single step? If I drag&drop my selection to my Photoshop-Icon, PS opens just the iPhoto-created library-JPGs of the RAW-files but not the RAWs itself (I've turned out the copyying of the imported photos to the iPhoto-library. Instead iPhoto seems to create a JPG for the library from every RAW I import). If I doubleclick a selection of RAWs in iPhoto just the doubleclicked RAW-File will be opened in Photoshop. Is it possible to select more than one RAW-file in iPhoto and get Photoshop to open all the selected RAWs but not the JPGs? It would make my work a lot easier... thank you.
rockenbaby

hello
try selecting the photos that you want however many- go, File then Export.
you can make all your file selections image size etc and then save them direct to your PS file.
hope this helps.
cjp

Can one datasource supply delta to more than one data targets?

Can one datasource supply delta to more than one data targets?

Hi Alok,
You can assign only one infosource to one datasource but you can feed any number of data targets based on the requirement from that Infosource. It can be either Delta or Full load. But to do Delta, initially you need to do INIT and then go for Delta. If you have already done full load into a data target, you can go for INIT w/o data transfer there after continue with Delta.
Hope this helps u...
Regards,
KK.

How do I get more than one signature option in Fill and sign?

How do I get more than one signature option in Fill and sign?

Hi,
Are you trying to place more than one signature on a PDF document?
Please explain the workflow.
Regards,
Anand

Can there be more than one transport targets for a business system in sld

Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
Padmaja

Hello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

More than one column retrieved in "report and form" page

HELLO!
let's see if anybody can help me with this... i'm sure it's a stupid problem but i really don't know how to solve it.
when i create a new application with APEX, i want to add a "report and form" page. i select the table where de data is, and then click on add page. then i go to the page definition for the form that just has been created but there's no option for selecting more than one column as the link column...
i mean, i want to show a report with all the columns from the table and then, by selecting one of them, the form should display that column but the problem is that the primary key of the table is formed by 6 columns and i always receive the "more than one column retrieved" message as it's trying to retrieve the information using only one column. is there any way to make the link column be composed by 6 or 7 columns??

APEX can handle 2 primary key for one table (if you are using the automated fetch row and the automated process row).
In your case, you'll have to create your own "fetch process (page rendering)" and "DML process (page processing)".
Flex
Homepage : http://www.insum.ca
InSum Solutions' blog : http://insum-apex.blogspot.com

Adding a target to 'drag and drop' code snippet

Hi,
I would imagine it's a simple enough bit of additional code, but I'm no programmer, and trawling the Web has proved fruitless to date...
Within Flash CS5 and using AS 3, I'm attempting to create a series of drag-and-drop interactions for a learning exercise where items must be dragged into the correct box with positive and negative feedback being generated as a result of where the learner drops the item. All I need is the code to link the drag and drop code snippet (which I have working) to a specific object/location on the stage (which I cannot find nor figure out for the life of me)!
I may be overcomplicating given that perhaps there is a CS5-compatible extension out there somewhere (whatever happened to all of the e-learning extensions and tools Flash once had if my memory serves?) which can provide me with an easily customizable template to achive what I need to do?
Many thanks in advance to whomever can offer and tips, tools or usable code for this task.
Galvoice.

the easiest way to handle that would be to assign a transparent movieclip to the target position and use that movieclip as your droptarget.

How to more than one scale (4.0 scale and 4.3 scale)

Dear All,
In our case( Korea Sogang University) customer used 4.0 scale for module appraisal but changed to 4.3 scale some years ago.
In this case how can we use two scale ?.
some students have 4.0 scale appraisal and 4.3 scale also.
I want to total GPA as 4.3 scale bases becuase it is used currently.
regards,
jin dal

Jin Dal,
I think you can simplify this, depending on how you have actually defined the scales. In an ideal world, you would have set up the scales in the following way:
KRDO (A-F)
A = 90,000
B= 80,000
C= 70,000
etc., or some similar scale values
KRG1 (4.0 scale)
4.0 would map to 90,000 (NOT 100,000) - This means that the 'upper limit' of that linear quantity scale is something other than 4.0.
KRDR (A-F with +/-)
A+ = 93,000
A0 = 90,000
etc.
If you did this, then you would not even need scale KRGV.
Here is the problem. You cannot just go and change your scales now to this simple model. Why? The appraisals you have already stored contain the absolute value (i.e. the value on the 100,000 scale). They would then all be wrong, unless you went into each appraisal and re-stored it.
I mainly describe that scenario for everyone else out there setting up their systems. Leave some 'headroom' above you current maximum score in the GPA! You may need it later. This is described in the Base Configuration Cookbook in my sticky post.
Unfortunately for you, I suspect you set up your scale KRDO with A = 100,000, and your linear scale KRG1 with 4.0 as the highest values (= 100,000). That means you really do need the extra 4.3 scale of KRGV.
You will probably not want to keep going into the IMG to change the scale for GPA. In fact you might have a user bring up the performance indices for a pre 2001 student, and then immediately jump to a post-2001 student! So, here are your possible solutions:
1) Just have two different performance indices: one for pre-2001, one for post-2001
2) For your GPA PI, use the 4.3 scale. However, then you need to change your PI Calculation itself to look at the appraisal records. For the pre-2001 students, you need to actually CHANGE (in memory; not in the database) the assigned grades from A to A0, B to B0, C to C0, etc.

How do I create forms that people can complete in more than one sitting i.e. save and submit?

Hi,
I have just bought formscentral and need advice to achieve my objectives:
Required:
Customer can part fill form, save and complete later on and submit for us to capture the data.
Customer can save or can access their completed form, as we need them to print it out, and physically sign a version for us for legal reasons
Several different people within the customer's business need to fill out different areas of the form, so they may need to e-mail the form bwtween each other or each logon and complete their section.
Are the above achievable? If so can I do as a web form or pdf? Are there any settings I need to apply to the form before or during creation? Are there only certain methods of distribution that will work?
Other concerns:
Our end customers are small traders that are not that computer literate and I worry that they won't have the latest adobe reader or the form won't be compatible with their Mac or firewalls etc and will struggle to be able to fill out, save and submit the forms for technical reasons. Are these concerns justified? If so, are there ways to minimise these issues?
Any guidance is much appreciated. The package also mentions it includes one to one support from Adobe - how do I access this support?
Thank you,
Rob

If a requirement is that the form be passed around to several users, I think that the PDF option is your only hope. It will indeed be a problem if users don't have Reader or some other forms-capable PDF viewer. You don't have to do anything special apart from enabling it with FormsCentral. This allows users with Reader versions prior to 11 to save the filled-in form. You'll just have to try to educate the users to use Reader (and NOT to use Preview on a Mac).

More than one editor (computer) for iWeb and using paypal

I am not a full-time Mac user, but have been asked to complete a website for a client who has started one in iWeb. She wishes to continue her site in iWeb so that she can make future changes to it. Currently, we have different versions of iWeb on our computers (hers is 2.0.4, mine is 1.0.2). It is my understanding so far that we would need the same version to be able to edit the site on both computers.
Before I can agree to finish the site for her, I would like to confirm that if I upgrade my computer to iLife 08, and she publishes the website to MobileMe, I would be able to retrieve the site and work on it from my computer and vice versa.
Also, she wishes to incorporate paypal in her site. Would this be an issue?
Thank you.

previllej wrote:
Also, would I be able to retrieve her domain file with iDisk (through MobileMe, right?)?
Yes, that's right. For transferring iWeb's Domain file you could use iDisk's Public folder. The general address is:
http://public.me.com/membername
And here's an example:
http://public.me.com/emily_parker
But before transferring the Domain file, read "NOTE 1" here:
http://iwebfaq.org/site/iWebTwocomputers.html
previllej wrote:
I had not heard of the PayPal rule for MobileMe - I will look into this. If you have a link to the documentation for it, please let me know.
+"The Service is designed for personal use and not intended to be used for commercial business purposes, including, but not limited to, *transacting online sales* or software distribution via an e-commerce site."+ ...Quoted from the _MobileMe Terms of Service_.
So yes, you could upgrade to iWeb '08 in order to be able to open the Domain file transferred via iDisk. But if the site is using PayPal, you are not supposed to publish it to MobileMe — instead, publish it to a folder and then FTP to another host.

It is necessary for me to have more than one window open in Firefox, and the command (New Window) no longer works. How do I have two different websites open at the same time on separate displays?

I used to be able to open two Firefox windows at a time, with one website on one display and another website on another display. Now when I select New Window, nothing happens.

You can tear off a tab (right-click: Move to New Window) to open it in another window and resize both windows so you see them at the same time.
*Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
*Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

More than one correct target in Drag and Drop

Similar Messages

Maybe you are looking for