More than one view with iphone SDK.
Hi
I'm trying to make more than one view in Interface Builder and then switch between them in xcode. But I can not figure it out.
I tryed reading guides, watching tutorials, but with no luck.
Can anyone here give me a small tutorial on how do that?
Your best bet is to look through the code (and xib files) distributed by Apple. I was in much the same position a couple of months ago, except my expertise was in JEE. It is really not that difficult to get going. Just a regular Cocoa development book can also help you (it helped me understand how to get going).
Here is what you will start with
ApplicationDelegate - Will be connected by default in your primary xib file. For simple applications that is all you need. If you need multiple views, you can still make the primary nib file you primary view and lay it out as you need. Add methods as appropriate to remove current view and display next view you want.
Xxx.nib - Your primary xib file. Layout out as required. Create a UIViewController and connect to the File's Owner. That connects your controller to the view. Make connections to the view components in the xib file, event handlers etc. It is not difficult, but IMO IB is not very intuitive, though you will get the hang of it very quickly.
Similar Messages
-
Cannot Add Invoices with more than one costing centers by SDK.
Have no available DI Interface to access cost/profit center
Cannot Add Invoices with more than one costing centers by SDK.Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han -
Can I get more than one account on iphone microsoft exchange server
Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.
-
Can I update more than one iPad and iPhone from the same MacBook pro?
Can I update more than one iPad and iPhone to ios 5 from the same MacBook pro? Our family has one MacBook pro and several iphones and ipads. No one wants to lose their iTunes music or contact list or calendars.
Yes, but you will want to think it through before you do it.
The computer will become the "master" device, holding the definitive collection of music, photos, contacts, etc., and each iPad or iPhone will get a copy of what's on the computer. So if everyone has different collections of music or photos that you all want to keep separate from each other, you'll want to set up different accounts on the MacBook Pro. To do that, go into "System Preferences" and click "Users", then click the "+" to create a new account for each person who needs their own set of files.
That way you can each log in to your own MacBook account before you sync your iPhone or iPad, and everyone has their own copy of iTunes and their own iPhoto. If you happen to plug in an iPhone while logged into someone else's account, you just click "don't sync" (the 1st time only, it will remember after that). Sharing the same files becomes tricky, so this is only the best method if you want to keep things 100% separate.
On the other hand, if you all have your music and photos mishmashed together on the MacBook anyway or just don't care about keeping things separate, just go ahead and sync your iPhones and iPads without setting up new accounts. But in this case, you should create playlists and photo albums in iTunes and iPhoto. Then plug in an iPhone, click on it's icon in iTunes, and change the settings for Music, Photos, etc to only sync the playlists that you want on that device. Repeat for each one. They'll all remember their own settings, and continue to sync with their designated playlists or albums.
What you cannot do is use more than one computer with a single iPhone. That will wipe out the music and photos that were on it already, replacing them with the ones on the second computer. -
Why can't I set up more than one ipod with the same e-mail account?
Why can't I setup more than one ipod with the same e-mail account?
Not really sure what you are doing that this doesn't work...I have an iPhone, iPad and iPod all using the same email account without any conflicts. Can you explain a littl about what you are trying to do that isn't being allowed?
-
How can I make more than one account with chat on clubwpt?
I can't make more than one account with chat on clubwpt? i know several players that has made as many as 20 accounts with chat.I can make accounts but clubwpt will not give me chat,they must have my IP address ,because their response is " you r allowed one account with chat only." But as I have said several players have several accounts with chat. Can anyone help me? Are there any programs or plugins that can do this?Any help at all will be greatly appreciate.
Open another iCloud account for the other user.
-
How can i use Itunes to update more than one IPad with more than one owner
How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?
Of course, that is too easy. I am such a bonehead.
-
Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.
set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08) -
One Key FIgure in more than one column with different restrictions
Hi,
I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??Hi Pravender Chauhan,
If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
Assign points if Useful.
Regards,
Rajdeep. -
HT1420 Can you have more than one device with a different Apple ID authourized to the same computer
Can you have more than one device with a different Apple ID authourized to the same computer
I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).
-
Can I install Adobe Creative Cloud in more than one computer with the individual plan?
I don´t have clear about the diference between individual plan an teams. My questions are:
Can I install Adobe Creative Cloud in more than one computer with the individual plan?
The team plan means that I have to pay for US$70 for each computer that i want to install the creative cloud even if I am the only user?Hi heymarusia,
Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Regards, -
WebLogic Error : Registered more than one instance with the same objectName
HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
EdsonHI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks. -
When I open more than one tab with ikls.ru web site - safari freeze immediately.
I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.
In safe mode the same problem in Safari. And I couldn't enable the guest account. You can see an attached pic. It's in Russian, but I think it's clear. I took a pic in a safe mode, but in normal mode it's the same.
-
How to display more than one column with for each
Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1 Item2 Item3
Item4 Item5 Item6
Item7 Item8 Item9
Item10
End for eachTake a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser -
Can you install logic pro onto more than one computer with the same cd key?
can you install logic pro onto more than one computer with the same cd key?
Only a desktop and a laptop, both of which must be Macs you own.
(60296)
Maybe you are looking for
-
Transport of .tpz files from PI 7.0 to PI 7.10
Hi Experts, I am planning to transfer the developed Interfaces from PI 7.0 to PI 7.10. Has any one have done it before? do I need to do any manual configuration or Developments again to run the Interface perfectly?. Expecting some v
-
I have been checking my order page for the past 2 days and it doesn't show any specific info on the page. The only thing it shows is We received your order and it is in process , Expected Ship Date: Not available at this time. My email said 10/7 but
-
PreparedStatement with IN sql clause
Hi guyz, Need ur advice once again... I am using JDBC 2.0 thin sql driver. I want a number column in db called TICKET_NUMBER Here is my problem. String sql = "select * from TICKETS where TICKET_NUMBER in ?"; ps = edbCon.prepareStatement(sql); ps.setS
-
Hi, How can you populate an Infopath form with values from the SOAP web service GetUserProfileByName operation when anonymous access is (and has to be) enabled on the server? Looks like the facility is redundant when this is the case?
-
ISSUE with accessing Printer on the DMZ !!
Hi, We are facing issues while accesing the printer in the DMZ interface from inside interface.The issue is happening when we are adding a printer to a new desktop. The printer is added via print server.The issue started happening after the server te