More than100 Items on a Page

When there are more than 100 Items on a page a message appears below the list of items "Item count of X exceeds maximum of 100". What happens when you exceed the maximum number of items?

If we view apEx as a framework, which actually is, maybe the design has to be revised if the maximum number of items is surpassed. Just like typical SE principles about modular designs.

Similar Messages

Fbl5n: The printer provides me only one customer items for each page...

Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
Thanks

Hi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind...

How do you pass more than 3 items to another page via a Column Link?

I know this is a simple question, but I don't see it covered in the manual.
I have a report on page 1, when the user clicks on a column link, I'd like to pass 4 items to the page that is called.
The Column Link area allows you to specify 3 items. How do people normally accomplish this?
Do you somehow use page zero? Do you use Application Items for this purpose?
Also, can someone recommend a good APEX book to supplement the manuals?
Thanks

hI
Oh Varad I didnt know this, Thanks for a new tip ;)
Just change the target to URL and enter a simple statement
in the URL section
f?p=&APP_ID.:50:&SESSION.:10:&DEBUG.::P50_item1,P50_item2,P50_item3,P50_item4:value1,#column_name2#,#column_name3#,#column_name4#
Use value when u know a fixed value to be passed
and column names on the same report can be passes by using #column_name#
Hope this helps
Thanks
Ashri
Edited by: Ashri on Nov 14, 2008 8:34 AM

More help with Skillbuilders' Modal Page Plugin

I have an employee page with a series of smaller report regions showing things like contact addresses, job roles, etc. All are form-on-a-table+report type of setup I would like to convert to modal pages. The popup is now working (thanks to a security setting pointed out by Dan), but on all of these forms, I would like to populate the P(X)_EMP_ID item from the parent to save the users an obvious step. I've tried putting it in the URL called by the Dynamic Action and I've tried setting the item value in the modal dialog to be the parent's correlated item, but neither seems to work like it would in a standard form page call where I just list the items to pass and their values. I must be doing something wrong here, but I can't quite place it. Can someone point me at what I'm missing?
Here's the URL I'm trying to use:
f?p=&APP_ID.:287:&APP_SESSION.:::287::P287_EMP_ID:&P281_EMP_ID.
where 281 is the parent page and 287 is the modal page.
I also tried setting up an additional TRUE action associated with the Dynamic Action to assign the page item value - that didn't seem to work either. BTW - I'm strictly dealing with the CREATE button ATM. I'll get to the edit links after I get this working.

Does your page 281 have an employee id item?
Yes. The respective items are P281_EMP_ID and P287_EMP_ID. There is also P282_EMP_ID, P283_EMP_ID, etc.
Even if it did it wouldn't make sense to transfer it's value to your form page if you wanted to arrive at the form page in a create mode.
In this case it does, however. I start out on a general listing (Interactive Report) of all the employees where each has an edit link to the "master" record for the employee containing employee ID, name, etc. There are several (5+) child tables to the master, however, which contain things like addresses, contacts, etc. Each has a one-to-many relationship with the employee master record. I am attempting to display these each in their own regions and this was working fine as standard form+report on a table with the report showing along with the master employee record.
As such, though the Employee ID acts as the foreign key to the master record, that value is predetermined by virtue of the currently displayed employee master record - thus the desire to have this value propagate down to the modal window/form page. The users also want it because they get distracted and frequently forget who they are working on. They want the name of the employee listed here, and this is difficult to display without the ID to reference.
To arrive at page 287 in a create mode you need to clear out the value of the primary key item on that page. See the following to learn more about URL syntax:
http://docs.oracle.com/cd/E2390301/doc/doc.41/e21674/concept_url.htm#BEIFCDGF_
Thanks. I looked that over and tried to make sure things were in the right place, but I'm pretty sure the issue is the automatic fetch. Once I wrote my own form population process to replace the existing one, it seemed to work fine and the URL syntax passed the value as desired.

Export selected items on each page in InDesign to JPEG

Hi All,
I have InDesign CS5.5. I have a document with more than 50 pages and each page has unique image and the description for image.
I need to export each page as JPEG. but i don't want to export full page. i need only the items on each page. So i go to each page and select all the items and export. while exporting i use the same name of the image used in each page.
I tried writing a script but it exports only the active page. i do not know how to navigate to the next page and export.
is some one can help.
below is my script.
var myDoc = app.activeDocument;
var myNumPages = myDoc.pages.length; //get the number of pages
var myFilePath = myDoc.filePath; //get the file path
var myRectangle = app.activeWindow.activePage.allGraphics; //get the graphics of the active page
var myPageName = app.activeWindow.activePage.name; //get the page name.
           if(myRectangle.length >1)
                    alert("the page has more than one image. Delete the other image to export");
                    exit();
var myImageName = myRectangle[0].itemLink.name; //get the name of the image
app.select(NothingEnum.NOTHING);
for(var i=0; i<myNumPages; i++)
          app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
          app.jpegExportPreferences.exportResolution = 300;
          app.jpegExportPreferences.jpegExportRange = ExportRangeOrAllPages.exportRange;
          app.jpegExportPreferences.pageString = myPageName;
          mySelectedItems();
function mySelectedItems()
          var myObj = new Array;
          myObj = app.activeWindow.activePage.pageItems;
          try
                              app.activeWindow.activePage.groups.add(myObj);
                              catch(e)
          app.select(app.activeWindow.activePage.allPageItems);
          app.selection[0].exportFile(ExportFormat.JPG, File(myFilePath+"/"+myImageName+".JPEG"), false);

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

Cannot insert second lib item on same page (DW CS3)

Hi, I am asked to build a website with 53 pages. My client, most likely, will come up with changes/desired extra pages in future, so I thought library items would be appropriate for navigation (correct? I am new to lib).
After inserting one library item (vertical menu with roll-over images) in a page, I also want to use this type of nav horizontally at the top of the pages.
However, DW (cs3) does not allow me to do so. This is the message: "Making this change would require changing code that is locked by a template or a translator. The change will be discarded." The parent page is not a template, just an ordinary new html page. I inserted the vertical nav lib into a div.
I understood it should be possible to insert more than one lib item in a page, what can be the problem here?
Thank you very much for any tips, suggestions and help.

function(){return A.apply(null,[this].concat($A(arguments)))}
You know what? I stopped working with the lib items, because I found out that working with SSI is much easier!
Same here.
I haven't used DW's Templates or Library Items for several years. I used to spend too much time having to find my way around the editables and non-editables. They just got in my way. SSIs are much easier to create and far, far easier to maintain.
function(){return A.apply(null,[this].concat($A(arguments)))}
(Server must be php complient).
Not necessarily.
SSIs can be used on plain HTML pages, PHP, ASP, ASP.NET and ColdFusion pages.
The principle is the same, but the Include code in the parent page is different.
ASP and .NET includes use the same syntax as plain SSI:

ColdFusion
<cfinclude template="/includes/filename.htm">
PHP
<?php require_once('/includes/filename.htm'); ?>

Print line items on next page if does not fir onto current page

Hello Experts,
I have a query related with Smartform.
For every Line item, I have 4 lines. Means, if there are 4 line itmes in Internal table then it means, on form 16 lines should be printed.
My Requirement - If any of the Line item does not fin onto a single page then shift the whole line item onto next page. Means, If Line item 1 and 2 are printing on 1st page completely, but line item 3 is not able to print completely on 1st page then shift all the 4 lines of line item 3 onto next page.
I tried - Put the main table of main area in a Folder and checked the PAGE PROTECTION of that folder. And in the Foder itself, use a command with checked GO TO NEW PAGE. But it is not printing. Form goes into shortdump.
Please help me to resolve this issue.
Regards
Kuldeep M.

Hi,
U try to fix the no of lines per page. If the no of lines in ur table are more than the lines per page then u call the COMMAND 'Go to New Page' and give the Page name.
Eg:
data : lv_lines TYPE i,
          lv_lines_per_page TYPE i value 12.    (Try to design the Window height to fit 12 lines or ur wish)
          lv_count TYPE i.
describe table itab lines lv_lines.
Now, u loop the itab table and put a condition in the LOOP:
LOOP AT itab.
lv_count = lv_count + 1.
IF lv_count GT lv_lines_per_page.
   clear lv_count.
   create command 'Go to New Page'.             --->In COMMAND put condition lv_count GT 12
endif.
ENDLOOP.
Hope it helps!!
Rgds,
Pavan

Creation of additional drop downs in 'Item overview' tab page on portal

Hi,
I would like to know how do we add additional fields/drop downs on the xRPM portal in the 'Item Overview' tab page.
For eg:
We are having TECHNOLOGY TYPE field at Item overview tab page in xRPM portal - Portfolio Management view. Wherein we can have different dropdown values for selection.
Question 1 -> Can we have similar dropdown created on the same page? If yes, how?
Question 2 -> If we want to create more than one such dropdowns with their own defined dropdown values, can we maintain the dependency between them ?

I went through the document on the mentioned by you.
But my requirement is a bit diiferent.
I want to have 3 different drop downs with a numeric field attached to them.The sum of these numeric fields should always be 100 (two values are manually selected but the third value should be calculated automatically based on the previously selected values).
Example,
I select 10 as a value for Drop down 1, 40 for drop down2 then for the drop down3 the value should populate automatically as 50 (100 - (10+40)).i.e. the sum being 100.
Can you or any one please help me with this.
Also I am not sure how do we give multiple options for selection (like 10,20,..50 etc upto 100) for a drop down.

Multiple file browse items on a page

Hi,
A relative newbie so apologies if this has already been answered...
Is there a way to add an arbitrary number of "File Browse" items to a page and then programtically go through them and upload the files specified?
So a user, for example, goes to a screen and by default can upload 3 files however they have 5 files to upload. What I would like them to be able to do is instead of having to upload 3 files followed by another 2 files they could add two more boxes to upload files.
To complicate things slightly more I'd also like each File Browse box to have an associated additional field that is a file description.
Best regards,
Gareth.

No problem I've been trying out a few ideas and have a workable solution - although there is one thing that bugs me/I don't fully understand.
In the page I have created the user clicks 'Add' to add the file to the collection which it does successfully. However this also causes the file to immediately be uploaded to APEX_APPLICATION_FILES.
Is there a way to prevent this behaviour? Ideally no files would be uploaded until an overall page submit occurs. i.e. The only thing that changes until the page level submit is pressed is the Apex collection. Once the submit is pressed the process loops through the collection uploading each file.
If this isn't possible then I can work around it I think by allowing the users to update the collection and delete individual members which in turn would delete the file from the APEX_APPLICATION_FILES view.
I suspect that the upload logic is somehow wrapped up in the "File Browse" item so it's not possible to do it in the way I imagine but thought I'd ask anyway.
Thanks again for your help.
Gareth.

Problems with max number of items on a page limit?

I have a page with 106 items which submits fine but when I add another item (a text field) a page 404 error displays when I click the submit button. I had a look at [m-2399990] which mentioned that the "items rendered per page" limit is 100. I'm not sure whether this limit is the problem or not. I would greatly appreciate any help you can give.
Many thanks,
Christopher

Hi Christopher,
i had a same problem, the solution was to break the single forum into two tab pages.
More than 100 items in Form or Page
Hope this helps
Regards
mozkavra

Refrencing an item of one page from another page.

If an item is added in one page then, is it possible to reffer this item in another page. So that if the original item is changed it is refleted in other page as well.

There's also a third, non-portlet solution:
Create a package with a PL/SQL procedure containing item. Set package's grant access rights to "PUBLIC execute". Then call the package as a PLSQL item on a Portal page (schema_name.package_name.procedure_name).
Drawbacks: Not all updates to the package's content will be immediately apparent on Portal pages ... web cache can store outdated content ... but this is a web cache configuration issue.
Advantages: This is really fast to code (using htp.p) and dead-simple to implement. I'm surprised Oracle doesn't showcase simple tools like htp.p and htp.form. Really useful stuff and no thick manuals/whitepapers to slog through. OK, one more advantage, Portal gives the user complete control over item layout ... portlets tend to create whitespace around them.
Mike

The operation can't be completed because one or more required items can't be found. (Error code -43)

When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

I get an error -36.
I did the dot_clean in the terminal.
Did not fix it.

The item contains one or more busy items that cannot be changed

We have a Windows 2003 file server and we are having issues with Macs retrieving files/folders from it. There is a folder on the Windows share named "dropbin" that UserA has full permissions on. UserB has the following NTFS permissions on the dropbin folder.
Traverse Folder / Execute File Allow
List Folder / Read Data Allow
Create Files / Write Data Allow
Create Folders / Append Data Allow
Write Attributes Allow
Write Extended Attributes Allow
This gives UserB the ability to look inside the dropbin folder and place content in there. This same user cannot delete or pull down anything that a different user (UserC) has put in there. UserA (the person with full permissions) should be able to pull down anything put in there.
This works fine from an XP box if an XP user (UserB) puts content in there UserA from a Mac or a PC can get and manipulate the data. If a Mac user (UserB) puts a file up there (it seems to happen with a .txt file, a .cp file, or a .zip file) UserA from a Mac gets the following error when trying to download the file:
"You may need to enter the name and password for an administrator on this computer to change the item named item.txt"
When you hit continue you get the following error:
"The item item.txt contains one or more busy items that cannot be changed"
If you proceed to enter in the admin credentials, the file doesn't copy down to the local Mac and fails without an error.
A couple of things we noticed....
1. If Mac UserB puts up a Word document or a .dmg file then UserA from a Mac can pull it down fine without errors.
2. On the Windows 2003 server we noticed that for each file we tried to upload it creates a ._ corresponding hidden file. For example, item.txt also has ._item.txt. If we go up on the server and remove the hidden file, Mac UserA can pull down the file fine.
3. We tried zipping the files (or files and folders) locally on Mac UserB's desktop then putting the .zip file up there but since it creates a ._file.zip Mac UserA still can't pull it down.
4. The fix we found for this is to have Mac UserB place the files they want to upload into a folder on the desktop, then upload that folder. When Mac UserA comes by they can pull down that folder's worth of stuff.
We are accessing the Windows 2003 file share by going to the finder and using the "Go" menu and entering in:
smb://servername/sharename
and they use their Windows domain credentials to log in.

We may have figured this out but it requires some more testing. The reason why the file upload creates the ._ files in the dropbin folder when UserB puts content in there is because UserB does not have the "Delete" permission in that folder. My guess is that it creates the ._ file when the file is in transit but then deletes that file after it has completed the transfer (but without the delete permission it couldn't remove the ._ file). What we did was added another user to the NTFS permissions for that folder, we added the built in "CREATOR OWNER" account and gave that user the "Delete" permission, now the ._ files do not appear under there and UserA can come along and manage the uploaded file okay.
Hope this helps someone else out.

One or more busy items cannot be changed

I've dragged songs out of iTunes to a folder on the desktop, dragging this folder to my external HD the message "the item "..." contains one or more busy items that cannot be changed" comes up. The permissions for this folder are read and write so not sure what else to do. I've done this before and had no problems...

I finally sorted out a similar problem.
Discover which files are involved by copying the *contents* of the source folder to a destination.
The offending folder (or folders) should display by name. If the item is a file, the file name should display. You can drill down within a folder by the same process: copy the contents (not the entire folder) to a destination, to find the offending folder or item.
I ran across and old (2002) posting which mentioned file type as preventing deletion:
http://hints.macworld.com/article.php?story=20020920055805577
I found an old application which can display file creator and type on OS X:
http://www.frederikseiffert.de/filetype/
How old is it? The System Requirements are:
"FileType runs on Mac OS X v10.0 or later and on Mac OS 8.6 or later with CarbonLib 1.3."
It runs on 10.4. Haven't tested anything later.
I discovered that the file types on the offending files were "brok". It so happens they were all tiffs, so I changed them to "TIFF". I still got a message about needing to enter an admin user and password, but the copy then worked.

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

More than100 Items on a Page

Similar Messages

Maybe you are looking for