More then 2 partitions on an external drive with a Fat32 partition...

Hey guys. I'm having some troubles with partitioning an external USB drive in disk utility.
I want to have 4 partitions total, 3x MAC OS Extended (journaled) and 1x FAT 32.
I am able to create the partitions (using GPT) fine in disk utility and as far as the OSX is concerned, all the partitions are viewable and work fine however windows machines do not see the fat32 partition. Windows only sees one large GUID partition that it cannot read.
If I reformat the drive (using GPT) with 1 MAC OS Ext (journaled) partition and 1 FAT32 partition, both windows and the Mac find all the partitions and things work as they should.
I want 4 partitions so I can have a data drive for OSX, a bootable copy of the snow leopard install disc, a bootable copy of a fresh snow leopard installation and a windows data drive for exchanging files.
Is there anyway I can do this or do I need to stick to 2 partitions if I want the fat32 partition to be readable by windows?

savante wrote:
Hey guys. I'm having some troubles with partitioning an external USB drive in disk utility.
I want to have 4 partitions total, 3x MAC OS Extended (journaled) and 1x FAT 32 .... Windows only sees one large GUID partition that it cannot read. If I reformat the drive (using GPT) with 1 MAC OS Ext (journaled) partition and 1 FAT32 partition, both windows and the Mac find all the partitions and things >work as they should.
I would try NTFS. I know that that would prevent you from doing anything with the partition from your Mac, but that's sort of a small price to pay. To compensate partially, you could run MacDrive (mediafour.com) on the Windows machine(s). MacDrive allows Windows machines to read and write Mac formatted drives.
Is there anyway I can do this or do I need to stick to 2 partitions if I want the fat32 partition to be readable by windows?
Could there be a problem with the way Sno is formatting FAT. I never use FAT so I am not quite sure what is going on here. But, many have reported that the Sno Disk Utility no long refers to FAT32, just to FAT, and having FAT formatted, they have FAT problems--i.e., things don't work like they should under FAT32. Maybe you should try formatting with an Install DVD that clears specifies FAT32.

Similar Messages

  • Putting mac partition on external HD with a FAT32 partition

    Hi there, I have a mac and a pc. I have partitioned my new external hard drive with the pc putting on a 32 gig partition. That leaves 280 gigs not used on the drive. Seeing as the pc isn't letting me put any more FAT32 partitions on it (does anyone know how to get more on it?) I thought I could partition the rest of it in the mac format. I read before that someone else had done that. Is it possible? How do I do it?
    Thanks,
    Wayne Adams

    Actually, Mac OSX can partition larger FAT32 Partitions, as well as Window's 98se2, ME, or an APP called "Partition Magic"... upto almost 2 TB, but with FAT32 you'll always be stuck with a Filesize limit of under 4GB.

  • Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

    Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.  

    The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
    It isn't possible to partition the TC although you can create a image area.
    The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
    Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
    http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
    Read carefully the speed of the USB drive plugged into the TC.

  • Lion 10.7.4 on an external drive with 2 partitions

    I have an external drive with 2 partitions one of which is used for Time Machine Backups. The other is 300 gigs and I want to install lion on it for study but the installer will not let me do that. It might be because of the larger partition that I use for Time machine but I don't see why as it is a separate volume on the same drive. I keep getting the not able to install the recovery HD message. I also made sure to erase and reformat the drive (journaled extended). Any ideas why I can't do this?

    Hey Kap
    Tried to shrink the volume by 2 gigs but I get a partition failed error: This operation requires a newer version of Mac OS X for this disk. I am running 10.6.8 on my cpu and the partition is empty as I erased it. also it is extended (journaled). I don't understand this message. wierd.

  • Time Machine doesn't like external drives with multiple partitions

    I've had a problem with Time Machine on both 10.5.0 & 10.5.1 - Time Machine could not create the initial backup regardless of all the things I tried.
    I have a Powerbook with a 300Gb Maxtor connected via firewire 800. This drive had been partitioned into three partitions (which I've used with other backup tools without problem).
    Apparently the problem I had been having with Time Machine was that there were three separate partitions on the external drive. As soon as I took a chance and wiped all of those partitions and made a single partition, everything was fine.
    I had called Apple Tech Support shortly after I got Leopard and when I discovered the problem with Time Machine. I specifically asked if there would be a problem from the multiple partitions and they didn't think there would be, but they were sure. Looks like Apple was wrong.
    If you are having problems with Time Machine with a drive that has multiple partitions, trying changing your external into a single partition drive.

    You will note that I was referring to a Powerbook and the Apple Partition Scheme. There might be something different happening for Intel/GUID users.
    10.5.1 did address other issues with other partition types. Time Machine seems to have trouble with certain partition schemes. I'm not surprised that multiple partitions and GUID works because of things like bootcamp. Apple probably tested specifically for that type of config. They may not have worked all the bugs out of multiple partitions on a Apple Partition Scheme.

  • No more external drives with Firewire?

    Seems like overnight this technology was discontinued - much to my misfortune.
    I need to back up a TON of video files to clear memory cards. I just bought a new drive from Best Buy, but it's write-protected and only has USB connectivity.
    What happened to Firewire?
    And... can I reformat this drive for my Mac and still get fast enough speeds via USB to make this a scratch disc?
    Thanks Final Cut gurus - please pardon my lack of knowledge on this.

    FireWire drives are still available, but are harder to find because places like Best Buy feature price over functionality.
    If it were me, I'd return the USB drive. Recently, I've found that Amazon dot com has had a nice assortment of external drives with a variety of interfaces at good prices.
    Yes it is possible to reformat the USB drivve for your Mac (it's not just possible, it's recommended) but the bus is still USB. It's an interrupt-driven bus, not designerd for continuous transfers like FireWire.
    Last note: get FW800 of your system supports it.

  • Using Disk Utility to create a partition on an external drive

    Hi Everyone
    I have a 250gb external HD drive which is currently split into two partitions of Fat32. I'd like to use this drive for storing images of OS X, but when I tried to create an image using the OS X startup DVD, I was told that FAT32 didn't allow large enough file sizes (or something along those lines) in order for me to backup my OS X.
    Disk Utility appears to offer the ability to split partitions on the external drive, i.e. I can select the largest of the two partitions and choose to split it into two 96gb partitions. However, will this be a destructive partition process, and can I reasonably expect my external hard disk to be reformatted with a 96gb Mac OS X formatted partition whilst still keeping two FAT32 partitions and all the data that resides on them?
    Any help is much appreciated!

    You will not be splitting existing partitions. Instead, you will be creating a new partitions from scratch.
    Run Disk Utility. Select the hard drive to be partitioned. Make sure you select the hard drive in the sidebar, not the volume indented below the drive. Go to the Partition tab. If you want one or more of the partitions to be MS-DOS, you must first click on the Options... button. Select the Master Boot Record option and OK. Select Volume Scheme of 3 Partitions. Now set up your three new partitions as you want them, in terms of size and format. For the Mac partition, select Mac OS Extended (Journaled) as the format.

  • Re:  Leone's post May 2014 about how to best use an external drive with Aperture

    I am trying to find Leone who had a great post May 2014 to Diane. I posted tho same message as a 'Reply' to the Leone/Diane posts but then was worried it would not show up since that was some time ago so I decided I should post it as new.  Apologies if it comes through twice.   I am having trouble as indicated below:
    I found this response to the question about Aperture and external hard drives from last May.  I bought a WD My Book 4TB and need to back up photos I have in Aperture (many!) to free up space.  I am a photographer and need to be able to plug the external drive in as needed, pull a photo out from the WD and back into Aperture to work on it if needed.
    I read your directions to Diane and have the external drive formatted Mac OS Extended (Journaled).  I read the two ways you suggest to move part or all of my library to an external drive and still be able to use it in Aperture with all the metadata saved, as I need to continue to work with the images.  I am not completely clear about the advantage of the 'referenced' method but decided to go with the Split Library because it sounded like the Referenced method would still keep originals (and take space) in Aperture.  I'm not sure about this, but that was what I chose.
    I have backed up my computer, formatted the drive then went to Aperture to begin.  I do the 'Export' and it shows the external drive it will go to but when I click 'OK', it says "EXPORT LIBRARY FAILED - Library could not be create because the file system of the destination volume is not supported."  I doubled checked to be sure the drive was Journaled which it was.  I did call WD and talk to them but they told me this was outside their area.
    Also, in Aperture, I have my photos in Projects by yymmdd.  Is it possible to transfer Projects into the ext. drive without having to break them out of the Projects?
    Any direction anyone might give would be greatly appreciated, Sandy

    Hi Sandy,
    I suggest taking a week or two to get to know Aperture better before proceeding.  Aperture can do many things, and can do what you want.  It's important to be specific about what you want, however.  From what you've said, it appears that you don't yet know.
    bybeeler wrote:
    [1] I found this response to the question about Aperture and external hard drives from last May.  I bought a WD My Book 4TB and need to back up photos I have in Aperture (many!) to free up space.
    [2] I am a photographer and need to be able to plug the external drive in as needed, pull a photo out from the WD and back into Aperture to work on it if needed.
    [1] A back-up is a copy of digital files stores on a separate device.  A back-up is recommended because drives fail, and humans make mistakes.  A back-up is not used to free up storage space.
    [2] Aperture can be set up in many equally-usable ways.  The program files reside (almost always) on your system drive.  The data files can be anywhere you want them, as long as they are on locally-mounted drive(s).  The main data file is your Library.  The best place for it is on the drive that has the fastest throughput to your logic board.  This is, in nearly 100% of machines, the system drive.  But Aperture functions well with Libraries of secondary drives — internal or external — with sufficient throughput.  USB-3 and Thunderbolt I (& II) provide sufficient throughput for using an Aperture Library on a secondary drive.
    Nearly all photographers will fill whatever storage space is available (making data is what photographers do).  The question is: what do you do when your Library no longer fits on your system drive?  (And remember, you should leave at least 10% (I recommend 20% for heavy users of Aperture) of your system drive free.)  The answer depends, primarily, on whether your computer is portable or fixed in location. 
    If fixed, just buy a more-than-large-enough secondary drive of USB-3 or faster throughput, mount it permanently, and move (using Finder) your Library to it.
    If your computer is portable (and you can't increase the on-board storage), you have to select the best from several confusing alternatives:
    • Put your Library on an external drive with throughput at least as fast as USB-3
    — Pros:  Easy to maintain and back-up.
    — Cons:  Must have drive with you in order to use your Library.
    • Leave your Library on your system drive, but relocate your Images' Originals to an external drive.
    — Pros:  You can work on your Library without having the external drive available.
    — Cons:  You can't export (except Previews), Print, or make adjustments until your external drive is mounted.  Significantly more difficult to administer, especially importing and backing-up.
    • Leave your Library and and _some_ of your Images' Originals on your system drive, and relocate most of your Image's Originals to an external drive.
    — Pros: You can do any work on those Images whose Originals are stored in the Library regardless of where the external drive is.
    — Cons: Yet another level more difficult to administer.
    If you are comfortable with the administrative overhead, the third set-up will be the most rewarding.  Keep all _current_ Images Originals inside your Library, and routinely relocate the Originals of Images no longer current to the external drive.
    In no case is it recommended that you at any time remove from your Library an Image (not the Original — the Image in Aperture) that you expect to ever use again.
    HTH,
    —Kirby.

  • Can i have my windows partition on an external drive?

    hello all,
         alright, so im looking at a laptop for college and after much research and a few trips to the apple store i want the new, 13-inch macbook pro, with retina display and a 256GB flash hard drive. i love this computer in every aspect except.... you guessed it, its small hard drive. i can always get external drives to make up the differance though, and their is always the cloud so i dont think ill have too much of a problem. but i do need to use some software for college that is only windows based. so rather then splitting up this already small hard drive can i just install windows onto my mac (because i already know i cant put windows on an external drive with boot camp) and make the entire windows partition on the external drive? this way im not losing any native space besides that used to hold windows and im not installing windows to an external drive so hopefully bootcamp wont have a hissey fit. can anyone tell me if this will work? or if this wont work can anyone give me any other solutions to having windows on my mac without splitting up my native hard drive? such as installing windows to my mac and making the partition in the cloud or something? just anything so i dont have to split my already small, yet extremally fast, 256GB hard drive.

    You can install Windows on your internal drive and store your Windows data on any drive you want to use. Keep in mind that any Windows programs you install in Windows will be installed on your internal drive. So make the Boot Camp partition large enough for Windows and any programs you may install now or in the future. You will also need room for swap/page files and other activities such as installing Windows updates.
    100GB will likely be a good size for the Boot Camp partition given that it is unknown what programs you will be installing.

  • Best way to set up partitions on 250GB external drive

    Hi all,
    I've decided to go with an Iomega eGo 250-GB FireWire portable drive to back up my iBook's hard disk (30 GB) plus to store my photos and maybe hold a bootable copy of OS9.
    This is my first time using an external drive, so I don't really know how to go about setting things up.
    What would be the best way to set up the partitions on the external drive?
    1) I know I should create a 30GB partition for the iBook backup, but what about for the remaining volume? Is it best to leave it as a single large 200GB partition, or split it into two 100GB chunks? Other than the clone of my iBook, I'll mainly be storing photos (at the moment no more than around 10-12GB).
    2) I don't yet have a huge iTunes collection, but if I later want to store iTunes music that doesn't fit on my internal drive, is it fine to put it in the same partition as the photos, or would it be preferable to create a separate partition?
    3) If I want to install OS9 on the drive, how much space should I allot to it? Would this enable me to run legacy apps on my iBook?
    4) Does it matter how I name the partitions (i.e. should the name for my iBook back-up be the same as the original volume or should it be different?)
    5) As I still don't know exactly what I need, If today I decide to create only 30GB partition to backup the iBook, can I later partition the remaining space without having to start all over again?
    6) Also, the drive came out of the box with Mac OS Extended format. Is this the best format or is there another that would be better?
    Thanks for any advice
    Message was edited by: Lutetia

    1) I know I should create a 30GB partition for the iBook backup, but what about for the remaining volume? Is it best to leave it as a single large 200GB partition, or split it into two 100GB chunks? Other than the clone of my iBook, I'll mainly be storing photos (at the moment no more than around 10-12GB).
    2) I don't yet have a huge iTunes collection, but if I later want to store iTunes music that doesn't fit on my internal drive, is it fine to put it in the same partition as the photos, or would it be preferable to create a separate partition?
    The answer to both question is that it's completely up to you. Partitioning or not partitioning won't affect operation significantly.
    3) If I want to install OS9 on the drive, how much space should I allot to it? Would this enable me to run legacy apps on my iBook?
    The iBook G4 can not boot from OS 9 so you would only be able to run OS 9 in the "classic" environment.
    4) Does it matter how I name the partitions (i.e. should the name for my iBook back-up be the same as the original volume or should it be different?)
    No
    5) As I still don't know exactly what I need, If today I decide to create only 30GB partition to backup the iBook, can I later partition the remaining space without having to start all over again?
    There are a few tools which promise the ability to change the partitioning without destroying the data on the drive. But you should never do this without making a backup of the data on the drive. Data loss can easily happen and in a big way.
    6) Also, the drive came out of the box with Mac OS Extended format. Is this the best format or is there another that would be better?
    That is the best format.

  • Clone a Mac Partition to an External Drive from within Windows 7 Bootcamp?

    Anyone know if it is possible to clone the mac os x partition to an external drive from within Windows 7 bootcamp? I (like a few others) had a problem with the latest 10.6.3 update and I cannot boot into the mac partition but I can access it via bootcamp so I was thinking about trying to clone it to an external drive and then boot from the new clone and see if that works.
    Appreciate your comments.

    setup a 30GB partition on an external drive, along with a partition of 150% the size of your Mac OS X volume -- or larger.
    Install OS X to 30GB.
    While booted from DVD, before you install, you'll need to go to Utility Menu => Disk Utility to do the partitoning. While there, in DU see if you can repair your system.
    And where is your TimeMachine or clone backup? The "Step #1: Backup before beginning your Boot Camp project."?
    No way to backup or clone from within Windows, though you may be able to write to NTFS backup volume, UNLESS you bought MacDrive8 which allows read AND write to HFS+ from within Windows.

  • Can I install Tiger on external drive with OS9 on internal?

    I bought and plan to install OS X 10.4.3, but will continue to use OS 9.2.2 about 95% of the time because I can't afford to update all 3rd-party software at this time, so I want to start up in 9.2.2 usually. Can I install 10.4.3 on a partition of my external HD with firewire and leave 9.2.2 on my internal HD, then pick a start-up OS by a key combination or such? How should I do it, and what problems might I encounter? To partition my external HD should I use OS 9.2.2, the original 9.0 CD, or the new 10.4.3 DVD?
    I have a Power Mac G4 (AGB Graphics) with an internal 10 GB HD and an almost-empty external 120 GB firewire HD (Iomega). Thanks.

    Welcome to Apple Discussions!
    Yes you can do that, though I'm not too sure that Iomega's firmware is up to date to do it. Be sure that any data you have on the Iomega is backed up elsewhere before attempting it. Some Firewire drives without up to date firmware from the manufacturer may become invisible and unusable after a software update on Mac OS X 10.3 or later. Also an AGP PowerMac needs its firmware updated while booted from Mac OS 9 before installing Mac OS X 10.2 or later:
    http://docs.info.apple.com/article.html?artnum=86117
    That said, if after testing you find it does work, you can switch booting between both drives using the Option key booting as described in the Startup Manager article:
    http://docs.info.apple.com/article.html?artnum=106178
    Leave OS 9.2.2 on your internal, and 10.4 on your external. That will be a lot easier than partitioning. Some information I wrote for others which can help you on your migration to Mac OS X is provided in this link below:
    http://www.macmaps.com/macosxnative.html
    If you really want to partition, be aware that only third party software is available to partition without erasing the entire drive, and you'll want to make sure additional partitions that will boot Mac OS 9 have Mac OS 9 drivers installed as my link above states. Whatever you do, be sure you have at least two copies of your data at all times:
    http://www.macmaps.com/backup.html
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • Recover external drive with file salvage

    Hi guys, By mistake I hit erase on disk utility on the wrong drive. I didnt use the drive at all after that so file salvage did recovered a lot of stuff. My problem is the media is grouped in the folders dv and quictime but Im not able to see the video, on the dv folder the quictimes have all square colors around the screen and the quictime folder is all white. and on both cases theres no audio. Im doing the process again and see if it works but does anyone has any experience recovering an external drive with it? is there another way to recover the media?
    Please let me know, im desperate to recover this drive!
    thanks a lot

    My recommendation is use one Caldigit in RAID 0 for editing (we'll call it C 1) and use the other Caldigit (C 2) as a backup.
    When you get new material, copy it to C 1, then to C 2. Take C 2 off line. You can not accidentally erase a drive if it is not connected and/or turned on.
    Edit your projects.
    At the end of the day, back up C 1 to C 2.
    As C 1 and C 2 fill, you will need to move older and/or finished material off of them. Get a MacBurly or other 2 drive enclosure with swapable drive bays. You could also just get a simple bare drive housing like the Voyager Q. Purchase a pair of bare drives (always purchase your drives in pairs). We'll call this first pair: Archive01 and Archive01.back. Backup whatever you need to remove from the Caldigits to your Archive01 and Archive01.back drives. Test that the material transferred ok to the new drives then take them offline. If you are using the Voyager, put them on a shelf. Delete what you just copied from the Caldigits.
    Rinse and repeat as necessary.
    Keep in mind, a drive placed on a shelf and not used is probably more prone to failure than one used constantly. So, every few weeks, spin all the drives up and run disk utility on them to verify they are ok. This gives the heads a workout and keeps the drive from seizing up.
    Aren't you glad you asked?
    Good luck,
    x

  • How do I format an external drive with mountain lion?

    How do I format an external drive with mountain lion?

    Applications > Utilities > Disk Utility
    select the external drive in the left pane
    partition and format in the right pane

Maybe you are looking for