More then a Deployment Diagram

Hi,
to my understanding a deployment diagram describes how an application looks like once it is deployed:
- Component a - c are deployed on node x
- Component d is deployed on node y and so on.
But how do I describe the development and deployment process itself?
This is important for me since for our database development we have a rather complex deployment process
which I want to document.
Typical steps are:
- doing some development in database A;
- checking in the changes in a version control system
- applying the changes on a database B
- run tests on B
- when successfull apply changes to database C
Any input is apreciated

I'd say you should use an activity diagram instead, but you could still use the deployment diagram to show what the end result is supposed to be. It is also possible to show the various different servers (e.g. staging, preview) using deployment diagrams. You can also show how (and what type) the data flows between the servers.

Similar Messages

  • Do I make more then one diagram in Multi layer design Diagrams?

    Do you make more then one Diagrams for Multi layer diagrams?
    develop the multi layer design. ?
    So I had to make a SSD or sequence Diagram now we have to make a multi design diagram?
    for the multi design. will we just be creating one big diagram of the assignment for this part?
    or is it going to be a collection of a bunch of separate diagrams. as books shows a few of them? regarding layers?
    For example create a diagram to cover all different layers/steps
    So should be a collection of 3 or more diagrams for Part 3 of TMA3
    do I have this correct?

    Just click on "Buy" one at a time. If you do them all in one sitting, they will be grouped as a single charge on your credit card.
    Some online music download stores have the ability to combine multiple miscellaneous tracks into a single zip file for purchase and download, but the iTunes Store does not work that way.

  • MDT Console with more then 15 machines, How to use the same drivers for more machines.

    Hello,
    I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
    The Situation:
    The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
    installation is a network USB key installation (with the deployment folder on the server).
    The local USB key exists for offices in parts of the world where the internet connection is poor.
    The problem:
    We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
    If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
    later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
    NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
    computers are using a certain driver.
    At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
    of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
    The Question:
    Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
    and MDT would not delete the drivers which are still used for the installations of other computers.
    Thanks in advance.
    Greets,
    Arie

    Arie,
    I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
    then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
    Ask yourself:
    - how long am I going to support model x
    - how many times do I want to update drivers
    With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
    I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
    If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
    big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
    It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
    Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
    to be 5 years ago.
    Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
    Good luck! :)
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • How to return more then one value in OC4J

    Hi,
    do I really need to create a serializable object + interface with an reader and writer to pass more then 2 variables back to the client ?
    Must this object a java bean ?
    .. or does anybody know an easier way to solve this problems.
    greetings
    Mike

    What is your client, and what are you using on the server? Are you trying to return values from a servlet to a web page, or from a servlet to a JSP, or from a EJB to a Java client?
    John H. Hi John
    We have some services currentliy implementet as PL/SQL stored Procedures on Oracle. They are now accessable with DCE and C-clients.
    The task is now to implement the services as Web-Services with SOAP. For that we want to use the OC4J. - as an SOAP Server.
    But unforunatly the only examples I found are returning only one parameter.
    The Java books learned me to create a class and an interface to pass more parameter to the client. This interface should be inherit from Serializable.
    The compiler is happy, the deployment is ok. But when I try to get the wsdl and stub I get something like: "must be an bean" or "have to be a reader and write property.
    From my point of view this looks very complicated. I want to use SOAP and therefore all parameters should be passed with one call and the parameter should be explained in the WSDL so that they could be used independed of the programming language and plattform.
    When I implement the read and write methods I will pass the parameters in one stream. When I only use Java I think this is a solution - but what is with C or other languages.
    Ciao Mike

  • Problems with iTunes/ipad2  I'm trying to buy FREE apps and I'm being told my card is declined but I also have more then enough credit on my account! Anyone having this problem?

    Problems with iTunes/ipad2  I'm trying to buy FREE apps and I'm being told my card is declined but I also have more then enough credit on my account! Anyone having this problem?

    Part of the validation for credit cards is that they need to be registered to exactly the same name and address that you have on your iTunes account, which prepaid cards tend not to be. Do you have a proper credit card that you could use ? Or are iTunes gift cards available in your country so that you could try using them as your payment method ?
    Until you have a valid payment method on your account and what you owe iTunes has been paid off then you won't be able to download any item from the store, including free apps (and updates to apps).

  • How do I get the text to flow throughout more then one page.

    Hello,
    I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
    I could always send the file to someone to see if they can figure it out.
    Thank you,
    Natalie

    Thank you so much !
    but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
    Natalie
    Date: Wed, 12 May 2010 07:53:12 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do I get the text to flow throughout more then one page.
    Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
    https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
    Thanks
    Srini
    >

  • My ipod wont let me download a game it tells me i dont have enough storage when i have more then enough

    My ipod wont let me download a game it tells me i dont have enough storage when i have more then enough

    To download and install an app the iPod needs storage available equal to about three times the file download size.
    If you sync from your iTunes library less storage available is required.
    Does the app/iPod meet this?

  • If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

    If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

    1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
    CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

  • How can I restrict more then one user to access the table?

    Hi !
    I have a problem and two solutions and I am a bit confused as to
    which one is the best one and/or can there be any better way of
    handling the problem ?
    Problem : I have to update a key field of a table when I update
    it in the form 5.0 screen. I am basically doing a maintenance of
    a table and if a certain field is updated then the change has to
    be reflected in two more tables. But the issue is that the field
    is a part of the key in those two tables. So all I can think of
    is that I need to insert new set or rows for that new value of
    the field and delete the old set of records for old values of
    the field.
    There are two ways of doing it;
    1.One option can be to explicitely define two cursors separately
    and fetch the values in them one by one and then insert the new
    records and then delete the old records in both the tables. This
    I feel will be a cumbersome process both in terms of processing
    time and the coding.
    2.Second option I was thinking can be to create two flat tables
    (without keys) and insert the values in them and update the
    changed field there and then insert the rows in the respective
    tables. Delete the old records in the main tables and delets the
    records in these flat tables. This is a bit more faster and
    easier to predict and code. This seems to be a better option for
    me.
    Any comments on these ?
    In both the cases I was thinking of making some provision so
    that more then one person can't update the table simultaneously.
    Since if there are more then one persons doing the processing
    then some inconsistency might creep into the whole process.
    This is easier to do in the second process as if I check the
    data in the flat tables and if there is some data then I can
    presume that some one is doing the processing and I can ask the
    other person to hold for a while. But in this case how can I
    stop more then two people to simultaneously check for the empty
    table and start inserting the record ?
    I was just thinking of having a sepatare table having only one
    field and this will be a key field and as the process begins the
    process will insert a fix value say 'Y' in the key field and at
    the end of the process the record will be deleted and this way
    we can restrict the user to access the process more then one at
    a time..? Since you can't have same value of the key in a table
    more then once.
    Any better way of handling it will be deeply appreciated.
    How about locking the table at the begining and releasing the
    lock at the end ? Will there be any issue in that? since I am
    inserting and deleting the rows in the same transaction.
    Comments welcome,
    Shobhit
    null

    How about performing the update IN the database using a stored
    procedure?
    By using non-database fields on your form to get the
    information, you can then call the procedure in the database to
    perform the updates. If an error occurs in the procedure you
    rollback, if necessary, and send a message or status back to the
    form. If it succeeds you might wish to commit and then re-
    execute the form's query -- using either the original key values
    or the new key values...
    null

  • HOW DO I USE MORE THEN ONE ITUNES WITH MY IPHONE WITHOUT ERASING MY MUSIC?

    I have two different laptops with iTunes on it. I use both of them but my iPhone only works with one iTunes. I plug it into the computer and it says that my iPhone cannot use more then one iTunes. Is there a way I can use both or no?
    YES I AM CLICKING MANUELLY ADD SONGS TO MY iPhone.
    I just bought my iPhone about a week or so ago.
    Please help ASAP.

    I clone my library to a portable drive using SyncToy 2.1, a free tool from MS. I run this both at home & work so that I essentially have three identical copies of my library for backup redundacy, any of which I can use to update my iPods and my iPhone. I use iTunes Folder Watch occasionaly in case I've managed to download, for example, a podcast at one location but overwrite the library with a newer copy updated at the other. It can be done but you need to take considerable care...
    tt2

  • Can I use more then one apple ID on my computer/osx app store

    Hi,
    I use my MBP/iMac/ipad/iphone for both business and home.  Right now everything is setup to my home apple id (and I have made quite a few purchases with that).  With the release of the osx app store and FCPX,  my company wants to buy these for my computers.  But they want to do this on their apple id.  Can I run more then one id on a mac?  How can I make this work as I know they will want me to start getting more apps as they are released.

    You can have apps from multiple Apple IDs on one Mac. The issue will be that to update Mac apps bought with A ID #1 will require signing into A ID #1 in the MAS. And later when apps bought with A ID #2 need an update you will need to sign into A ID #2 in the MAS to update them. If you can keep that straight and can abide that requirement, there should be no issues.
    The same will be true to update iOS apps, but using iTunes.

  • Since iTunes 7 can't import more then one song at a time

    When I use File> Add file to library, I can no longer import more then one song. If I select more then one file, iTunes wont import anything. I have my music download to my main iTunes folder, therefor I dont want to use add a folder, also there often is other songs I dont want to import at that time. I can drag and drop from explorer, but its annoying.
    Not a terrible bug, but another in the long list for iTunes 7.
    custom   Windows XP Pro   P4 2.8, 1 Gig Ram, Radeon x1600pro, Asus mobo

    Thanks Rachyl, I'll try that when I get off of work. What about the album art? How can I make sure I get it every time in the future. Can I rip my CD's using another software to make sure they are tagged right?
    BTW I used to live in NC not too long ago and went to school there....GO HEELS!

  • Is there a way to Search (List search) for more then one field text from a column for Bulk uploading?

    I've been trying to find more information on this and I apologies if this has already been answered. I just don't know the correct way to ask this. We have a SharePoint List at the company that we have people input information into different columns. The
    problem is most of those information are very repetitive. Is there a way for me to search more then one field text in the column and just input that same information in?
    ex:
    Column 1
    Column 2
    Date:
    883851
    MidWest
    User input 
    8831518
    MidWest
    User input
    On the search field in the SharePoint List, I would need to search for 883851, 8831518 etc,  would view those requested numbers, then I would click edit and change dates to those rows. Does that make sense? I'm sorry I'm fairly new at sharepoint.

    I think what you're asking is about having repetitive options in a list, show up easily for new items being created.
    This can be done by setting the columns that contain repetitive information to Choice fields.  In the configuration of the Choice field, check the box for "Allow custom values".  Now as users are entering data into the list, the dropdown of options
    for a given field grows and users can quickly see and select previously entered and thus repetitive values for the given fields.
    I trust that answers your question...
    Thanks
    C
    |
    RSS |
    http://crayveon.com/blog |
    SharePoint Scripts | Twitter |
    Google+ | LinkedIn |
    Facebook | Quix Utilities for SharePoint

  • HT1296 How can i get my contacts to show on itunes on my laptop?  Or at least delete more then one at a time on my iphone 4s???

    How can i delete more then one contact at a time on my iphone 4s or bring my contacts up on itunes on my laptop?? please help

    No.
    Iphone will sync with one and only one computer a a time.  Syncing to another will erase the current content from the iphone and replace with content from the new computer.

  • More then one student license on same account

    Hello. Can i have more then one student license on same account. The 60% of thingy. One for home, one for work and one for the notebook. They may run simultaneously because of the friends using the computer. All 3 computers will use same account name and password.

    You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to de-activate on the other two computers.  You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription.  This is the same licensing btw which we have for our prepetual product.  An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
    As it stands, the EULA states that you can install it on up to two computers at a time, however, you cannot use applications on those computers simultaneously. This is the case even when you are not using the same application
    http://www.adobe.com/legal/licenses-terms.edu.html
    Regards
    Rajshree

Maybe you are looking for