Most of the applications won't run..

after i had updated My phone from symbian Anna to symbian belle,it works fine at first...but after sometimes,most of the applications wont run.(i hope i did nothing)
let me label the applications.(these applications are packed with symbian belle update)
they are shazam,font magnifier,ovi store,ovi maps,traveller.photo editor,video editor...
I had removed some of the applications but some of them Cant be removed.
I had tried hard reset My phone, sadly, it didnt work and it shown misc at the shortcut That i removed..
What should i do
Solved!
Go to Solution.

@shuin93
Have you tried re-installing existing device software with Nokia Suite?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this?

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

What computer do you have? is it 32 or 64 bit operating system?

Certain applications won't run

Certain applications won't run. Mail, Safari (I'm sending this with Firefox), and now Installer. The disc now verifies although I had to repair the disc earlier. This started when trash-emptying wouldn't complete. Disc Utility from the Tiger install disc found what it called a minor error - a file that was a little too big (don't remember the file) and free space a little too small. Here's the crash log when I try to run the 10.4.10 PPC combo update - after a hint I got in another thread about a problem like this. I believe the same file is mentioned for any of the apps that won't run. If you have any ideas how I should proceed, please let me know. Thanks, Joe
===== Sunday, November 4, 2007 2:01:07 AM US/Pacific =====
dyld: NSAddImage() error
dyld: Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/WebKit
Reason: no suitable image found. Did find:
/System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore: unknown file type, first eight bytes: 0xCA 0xFE 0xBA 0xBE 0x00 0x00 0x00 0x02 /System/Library/Frameworks/WebKit.framework/WebKit
Nov 4 02:01:39 joe-diederichs-powerbook-g4-15 crashdump[351]: Installer crashed
Nov 4 02:01:39 joe-diederichs-powerbook-g4-15 crashdump[351]: crash report written to: /Users/joed/Library/Logs/CrashReporter/Installer.crash.log

Joe Diederichs wrote:
How bad is it to try to install the combo update from the Terminal? Thanks, Joe
Well, it's this bad:
First off, a disclaimer. I didn't think of this, and I've not tried it from the DVD, though I did check the commands on a booted system. But it looks like it should work to me.
Okay, to use Terminal on the DVD, do this:
First, open up the disk image for the updater and copy the ".pkg" or ".mpkg" file onto your desktop, since that's an easy place to find it. Eject the disk image and make sure the package file stays on the desktop. Make a note of the package's exact name, including capitalization. You'll need it later. Now, open the Terminal on your Mac and type the following:
cd ~/Desktop; pwd
Write this path down somewhere, and keep in mind that case counts. It'll be something like "/Users/username/Desktop".
Now, take a look at the name of your hard drive. It's most likely something like "Macintosh HD". The main thing is to note any spaces in the name and note the name. I'm not sure whether auto-complete, and all the other good stuff, works in the Terminal on the DVD, so it's best to write these things down.
Now, boot from the Tiger Installer DVD and open up the Terminal app from the "Utilities" menu. Now, you need to construct a command to open up the installer package for the update package. Here's how it should look (without customization):
"/Volumes/Macintosh HD/usr/bin/open" -a /Applications/Utilities/Installer.app "/Volumes/Macintosh HD/Users/username/Desktop/MacOSXUpdCombo10.4.10PPC.pkg"
A couple of things to note: first, the quotes around the first part are necessary because of the space in "Macintosh HD", same with the last part. Also, it's possible that the installer will open up the OS X installer package from the DVD as well. Just be really sure you're installing the update and not the full OS. Also, make sure you customize the username in the last part, just before "Desktop".
Finally, if you've installed any updates after the 10.4.10 update (especially security updates), it's possible that the problem with the WebKit will not be fixed, since the 10.4.10 combo installer may not install the older version of the WebKit over the newer one. In that case, you might have to do the other updates that came after 10.4.10 to eventually get back to where you should be. And all this might be in vain if some other critical file is damaged, but hasn't been updated since 10.4.0.
charlie
P.S. -- Like I said before, I haven't tried this, and didn't even think of it. I found the general procedure at, of all places, the Washington Post web site in the comments to a blog entry. Look down toward the bottom.

The most of the application doesn't work in yosemite

Hi,
Since yesterday i have problem for open the most of the Applications in Yosemite...only someone of them still working.....
They only jump...and jump...and jump....but nothing....
Was already happen one time and especially when i switch off completely my Laptop....but after i couple of reset everything was coming another time normal....

The system is heavily modified by third-party software. Each such configuration is unique and unpredictable. I can only guess which of the many modifications may be contributing to the problem. As a start toward solving it, I suggest the following steps.
A
The battery is due for replacement, and there may be other hardware problems.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.
B
Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.
C
Back up all data.
Run the following command in the same way as before. It moves to the Trash "semaphore" files that have not been cleaned up by the system and may be interfering with normal operation. The files are empty; they contain no data. There will be no output this time.
find L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.??????? -exec mv {} .Trash/ \; 2>&-
Log out or restart the computer and empty the Trash.
D
This procedure will delete certain temporary and cache files. The files are automatically generated and don't contain any of your data. Occasionally they can become corrupt and cause problems such as yours.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders/96
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with a subfolder named "96" selected. Move that subfolder to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
E
None of the following system modifications serves any real purpose, and any or all could be contributing to the problem:
    WD SmartWare
I suggest you remove them unconditionally.
These system modifications may do something useful to you, but could be causing instability or poor performance:
    Arturia Software Center
    Boom
    ControllerMate
    PACE Eden
    VirtualBox
If you want to keep them, do a trial removal to find out whether they're at fault, and refer to the developers for support if they are.
F
The symbol cache file is very large. It stores data used in logs and crash reports, and it may have grown because there have been a lot of crashes. The file is created automatically, and if deleted, it should be recreated when you restart the computer. Initially, at least, it will be a lot smaller.
I've seen one unverified report that a system became unbootable when the cache was deleted. That would have been due to a corrupt installation of OS X, but you should be prepared to reinstall if necessary. There is no reason to panic as long as you have good backups, which you should already have if you got this far.
Enter the following command in the same way as before:
sudo mv /S*/*/Caches/com.apple.coresymbolicationd /tmp/
Restart the computer.
G
Please back up all data, then open the iCloud pane in System Preferences. If the box marked iCloud Drive is checked, uncheck it and confirm. Your iCloud documents should be preserved on Apple's servers.
Test to see whether there's an improvement, then re-check the box and test again. It may take a noticeable amount of time for your iCloud Drive documents to resynchronize.

What windows applications won't run on a mac?

I'm about to go from PC to Mac and would like to get an understanding of what common applications won't run on a Mac. I'm not interested in things like MS Office and such which I know have Apple version, but I'm interested in Adobe Acrobat, Flash Player, Others such as Garmin, eBay Turbo Lister, Nikon View, etc. Seems to me I've heard that Flash files won't work on Apple Products. Are there apps that will allow some of these to run?
I don't think I have too many to worry about but I'd appreciate hearing what challenges others have had and what to expect in general.

All Office and Adobe products available on both platforms. Flash works fine on a Mac, just not on iDevices like iPads or iPhones.
Others that you've listed just find out if the developers have a Mac version. Do some research.

When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?

When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?
It's very frustrating and I don't understand why it happens. It might happen other times, but I notice it the most when I'm streaming the radio through itunes, though I think it's also happened when I'm streaming music or shows from NPR, so I don't actually know if it's an itunes thing, or an internet thing? Or just my computer being stupid? But how can I fix it?
Thanks!

My best guess at this point is a problem wwith 10.5.8
It seems clear to me that sometimes, seemingly randomly, software will access the video card (flash player, quicktime, Safari's HTML5 video player, etc) and it will cause a freeze and then log out.
However - it could just be video card + processor under load.
This didnt happen before 10.5.8 and I'm thinking it's not the new 27" display causing the issue.
I'm going to attempt to find time to revert back to 10.5.0 and then combo update back up to 10.5.7 which may be difficult as our IT is remote and we don't have access to Snow Leopard discs.
I may just have to bring my own in.

How to let the user know the application is still running during SQLite reads

I'm using an SQLite database to read and write to my application. In some places it has to do very large reads and writes and the application comes to a standstill for like 10 seconds while this is happening. I've tried calling showBusyCursor(), but it only works if I call that function and then set a timer to execute the sql query. But the busy cursor also freezes once the connection starts.
Why doesn't the showBusyCursor work during this time? Are there any other things I can do to the application to ensure the user that it is not frozen and just processing?

Keep in mind that I haven't actually implemented this yet, but my path is headed right in that direction in the next few days. From wh
at I have read you can access the database in two modes: synchronous and asynchronous. From your description it sounds like you are accessing the database in synchronous mode, which will stop the application thread until the database thread is completed.
To get around that limitation you will want to run your database accesses in asynchronous mode, so that the application will continue running while the database is being accessed. What you do then is implement a listener on the database that will call a function that will hide the waiting cursor or image. Then you start the waiting indicator in the application. Once the database is done, it will trigger your listener and remove the waiting indicator, allowing the user to once again interact with your app.
Hope this helps!
~Mike

How to call the Application configuration in run time.

hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.S

Hi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha

I am trying to update my mac to os x snow leopard but the cd won't run on my computer

I am trying to update my mac to os x snow leopard but the cd won't run on my computer. I'm using an external dvd hardrive but I don't see why that would make a difference in wether or not it runs.

Well, that may be the cause of the no install problem, as Snow Leopard does require at least 1gB of RAM. The Apple link below will show how it is installed.
http://support.apple.com/kb/ht1651#link3
The link below is for a highly recommended site to purchase additional RAM.
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/Macbook_ selector

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

I recently downloaded the new version of photoshop, but the application won't start.

I recently downloaded Photoshop CC but the application won't start.

What platform are you on. What is the URL you used to downloade. Did you install what you downloaded. Was what you downloaded Photoshop CC 2014 or the Creatice Cloud Desktop application that is used to download and install cloud applications like Photoshop CC 2014?

Most of the application fail to launch

After installing Mavericks, most of the applications on my computer couldn't not be opened.
I have no problem on the first few hours but after that lots of application that I have on my computer can't be open (eg. iMessage, FaceTime, Maps, Preview, App Store...)
Anyone have a solution on this problem or have similar problem?

same issue here! Cant open iCal, iMessages, or the app store (from what I discovered so far) I can open mail for now but I cant do anything insde it from reading a "clicked on" email to deleting the account (so I can re-add it trying to troubleshoot)...
Thought well, maybe they know by now and have sent out an update... which would be great if my app store opened.
Ive been die hard Mac for 5 years now. This is he first time I ever got f***ed.
So, I cant check email, cant see my calandar, I cant send and recieve messages... so what am I suposed to do now? I have a $3,000.00 Machine to play Portal 2 on? Wait... I should check if that works... Well, at least my GOOGLE Browser still works...

HT4314 how do I turn off a game after playing so the app won't run down my battery?

How do I turn off a game after playing it so the app won't run down the battery. This has happened 2x and I have had to reset my phone.

To completely close an app (though a lot of apps don't remain active when you switch into a different app or go to the homescreen) : from the home screen (i.e. not with the app that you want to close 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

Why can't I close the application that is running ...

Teach me how to close it...
even if I let my phone standby for 24 hrs, that application (music player)still running
I didn't play any song
if I let my phone shut down, of course all the application will stop running, but when I mistakenly click the music player,
the application will run for whole day until I let my phone shut down...

Invoke the music player, Options -> Exit. It's the last one in the list
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Application won't run if ressource .txt are included after deployment

I finished a project that plays .wav and .mp3 files as a SoundBox. In JDev, everything works perfectly. Once deployed, I can get the .jar to run if the 2 main .txt are not present in the .jar directory (the application uses them to load everything) but of course the window is empty. If I copy the 2 .txt in the same directory as my .jar, the .jar simply won't start. (or maybe it does and closes right away, I don't know)
I use the mp3spi1.9.5 library to read MP3 but even when I only include the .txt for .wav files, it still won't open. I made sure all the resources I need for this application are present in the right directory.
It seems like the application cannot read the .txt file once deployed. (using BufferedReader).
Any ideas as to what is provoking this and how to fix it?
Thanks

One reason i can think of is if your server name & domain name are same?
Fredrik Bertilsson wrote:
Hi!
I'm not sure this is the correct newsgroup for this Q. Forgive me if it's not...
I'm deploying an enterprise application with one web application and a set of
beans on WL6.0 sp2.
Deployment goes fine without any warnings, but when using the servlets, a message
is sent to the log informing that the default context failed to deploy.
1. What are the most common reasons for this, and what are the actions which may
eliminate some sources of error?
2. Do BEA have a checklist or tools for this as WL does not present any informative
message?
3. Which DTDs does WL use? The ones in lib/weblogic.jar?
Kind regards,
Fredrik Bertilsson

Most of the applications won't run..

Similar Messages

Maybe you are looking for