Motion 3.0.2 Keep crashing on Macbook Pro and Mac Pro without any reasons.

We have a Mac Pro with FCS 2 and I have a Macbook Pro with FCS 2 installed too.
Motion 3.0.2 keep crashing on both machine, and the frequency of crashing in the Macbook Pro is much higher and unpredictable.
I have done a clean installation of OSX Leopard and FCS 2 on both machine and all the software on both machine have been updated to the latest version.
I have Macbook Pro with 4GB of RAM and both machine are working in PAL SD format.
I have not done anything complicate on both machine. I just try to do some vortex behavior, some simple particle test with rate set to 10-20.
Oh! Both of them crashes too even when I using the templates come with the system, and the MBP crashes much more than the Mac Pro, but again both crashes to a frequency unacceptable to be used as a production machine.
Any hints and help will be very appreciated.

Hi jashpal,
If you are currently having FaceTime issues with your Mac, you may find the troubleshooting steps outlined in the following article helpful:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Regards,
- Brenden

Similar Messages

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • How do I use the App store with macbook pro and mac pro

    I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
    I can't find anything that specifically outlines how this works.
    I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
    If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?

    Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
    Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro.

  • Why does my MacBook Pro and Mac Pro keep freezing?

    Why does my MacBook Pro freeze?
    MacBook Pro
    2.4 GHz intel Core2 Duo
    4BB 1067 MHz DDR3
    OSX 10.6.8 Snow Leopard
    I turned it on and I went to safari to look things up. Safari froze and then the whole thing became unresponsive - the mouse could move the cursor but it couldn't open any programmes.
    Tried safe boot several times. No help.
    Tried to repair disc permissions. The first time it got a little way then said 'user stopped repair' or something  - though I didn't touch it. Tried again it got all the way through and said 'repairs complete'. But no help.
    Couldn't clear cache etc as couldn't get to the relevant part to do it.
    Opened in single user mode. Ran the fsck -fy thing twice. First time it said both “The volume appears to be OK” AND “FILE SYSTEM WAS MODIFIED.” In 2nd run it just said  “The volume appears to be OK”. No help.
    Booted it up from the Superduper bootable backup version on a USB external drive. It seemed to boot up ok but then tried to click on something and the same thing happened - spinning beach ball and it just hung.
    Erased hard drive and reinstalled snow leopard but it just does the same thing. Suggesting a hardware issue not software but...the Eerie thing is, we tried backup version on boyfriends Mac Pro and it worked fine on there but 24hrs later his Mac Pro has got exactly the same screen freezing, unresponsive issue. Could this suggest there's something evil lurking on my back up? Can't get an appointment at Genius Bar until next week and need to get some work done, so hoping someone might have some ideas?
    Cheers
    Kerry

    KaiDonald wrote:
    ... does Apple products work much better with using Apple routers?
    While a genuine Apple router is likely to result in success, the reason for having one instead of another product is that it eliminates a lot of uncertainty. For example, we do not know the model D-Link product you have so no one is in position to speculate what the problem might be. Also, it makes support on this forum easier since there are only three AirPort models to choose from and they all work more or less the same.
    Generally speaking your iPods, iPads, MacBooks, and AppleTV ought to work with any router though, provided it is fairly recent and meets accepted industry standards. If in doubt you can purchase an AirPort Base Station, which comes with 90 days of free telephone support. If it does not result in any improvement for you, you can always return it for a complete refund. The return period is 14 days and be sure to keep all material - receipt, box, manuals, etc...
    If you elect this option be sure to follow its installation instructions, the most important of which is to power down your modem prior to connecting the AirPort Extreme, Express, or Time Capsule. All your other equipment will need their network settings adjusted to "forget" the D-Link network and connect to the new one.

  • Wh does the internet connection keep dropping on my macbook pro and mac pro

    I have a Mac pro, Macbook Pro and iphone. All have problems with the internet connection especially after any short period of in activity. My mac Pro is connected directly with an ethernet cable and the mac pro wireless. I have to go through system preferences network setup all the time to reconect. Soemtimes whn on email choosing take all accounts online does cause a reconnect but only after a minute or so wait.

    Done that.. many times... also did a lot of suggestions from other posts.. removing pls files etc.. nothing works and it seems to be something experienced by other.. mysstery is it happens on all 5 computers in the office.. my isp has no suggestions... the pro can loose connection and the macbook wifi is OK and the phone usually works OK but leave my Macpro for 5 minutes and `I need to reconnct using system preferneces...

  • Can I hard wire a link between Macbook Air and Mac Pro?

    My Macbook Air currently connects to my office network using WiFi.
    But for some reason it takes 20 hours to load new software onto the Air using disc sharing from my Mac Pro, the fastest of my desktops.
    The transfer is over Wi-Fi and involves several Gb of data, but it seems excessively slow.
    Is there any way of hard-wiring the Air to the Pro to allow faster installation?
    The Air has both Thunderbolt and USB sockets, whilst the Pro has USB and Firewire.
    Many thanks,
    Bristly Badger

    I would suggest to use a Thunderbolt to Gigabit Ethernet Adapter with the Air. Disconnect the MacPro from the Network, simply connect the cable to the MacBook Air's Thunderbolt to Gigabit Ethernet Adapter instead. Wait a few seconds until both computers have picked self-assigned IP Addresses, and the shared disk should show up on the MacBook Air. Speed will be 100MB/s. In other words, 10GB will transfer in two minutes. (If the Pro's disks can keep up, that is...)

  • Can't Connect MacBook Pro and Mac Pro

    I have a MacBook Pro (pre 2008 - dual core) running OS X 10.6.7 and I regularly connect it to the Mac Pro at my work (also running OS X 10.6.7). I've had no problems until recently. Now, when I try to connect, I get the following message:
    "The server "name of my MacBook Pro" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
    Sometimes I click the icon to connect, the computer tries for a minute or so to connect, then it disappears from the shared list.
    This happens whether I try to connect from either computer to the other one.
    Ideas? Suggestions?
    This is frustrating.

    I'm still having problems with connecting my MacBook Pro with my Mac Pro. Both are running Snow Leopard (10.6.7). I have tried repairing permissions and toggling settings in my Sharing, but no luck. I'm still getting "The server "name of my MacBook Pro" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
    Anyone have any other suggestions?

  • MacBook Pro and Mac Pro.

    Forum,
    I am using a MacBook Pro 17 with a 2.4 Intel processor which is elegant and satisfactory.
    However sitting around waiting for it to render is a pain.
    It has 4Gb. RAM but that is not relevant to the problem.
    I have looked at a Mac Pro with two 2.8 Intel processors but is that powerful enough to render in real time,which I think means immediately?
    Thank you,
    Michael Craven.

    No matter how many processors or RAM you have FCP, at present, will mainly use one processor and something between 2.4 and 2.9 GB of RAM.
    However, Compressor together with QMaster are the two applications capable to exploit the best of a machine like the one you describe but for rather different purposes (i.e Faster video/audio compression elapsing time).
    Rendering is the antithesis of real time playing,anyhow, the need to render depends on several factors:
    1) Make sure your clip settings match sequence settings and the result is that you do not need to render
    2) Use FCP built in effect/transitions/generators plugins and you do not need to render.
    3) Make sure your audio is AIFF 48 kHz, 16 bit
    Any mismatch between clips and sequence setting or third party effect/transition/generator will result in an inevitable need to render.
    Hope that helps,
    G.

  • Powerpoint slow on MacBook, MacBook Pro and Mac Pro

    I have all three of these computers and they all run PPT painfully slow. Keyboard inputs have about a 0.5 second delay and when in the presentation mode, it takes about three seconds to advance each slide after a button press.
    Is there some basic feature I need to set up? I can't imagine that this is acceptable among mac users on the intel platform. As much as I love Keynote, I still need to use PPT. All three of these computers have this problem.
    Thanks,
    Quigley

    Quigair,
    How much RAM do you have in each computer? Powerpoint isn't yet a Universal binary, so it runs under Rosetta (which takes quite a bit of RAM).

  • Outlook 2011 slow, clunky and keeps crashing with macbook pro os 10.8.4 - any hints??  ta :)

    Outlook 2011 slow, clunky and keeps crashing with macbook pro os x 10.8.4 - any hints??  ta

    You might look in your User Library for Outlook .plist(s). They probably start with com.microsoft.
    Quit Outlook.
    Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences.  Move the .plist(s) to your desktop.
    Open the application and test. If it works okay, delete the plist(s) from the desktop.
    If the application is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • After updating my software from snow leapord to mountain lion my  MacBook   Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone help

    After updating my software from snow leapord to mountain lion my  MacBook   Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel

    Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • My iphone 5 keeps crashing all the time and has a delay of about 3 seconds when doing anything on it i did a factory restore on it but it didnt fix the problem

    my iphone 5 keeps crashing all the time and has a delay of about 3 seconds when doing anything on it i did a factory restore on it but it didnt fix the problem i went to optus to see if they could help me as my phone is through them but they knew nothing i need help please my phone is only 8 months old

    Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.

  • Photoshop CS6 keeps crashing when I try and change brush colour

    Hi, my Photoshop CS6 keeps crashing when I try and change brush colour. I use layer masks a lot and consequently need to switch between black and white brushes. CS6 crashes a lot and gets closed by Windows 7 when I either click in the icon to swap brush colour or press the X keyboard shortcut. It's driving me crazy. I run Windows 7 on a high spec Dell PC. The problem has only started a couple of months ago, had CS6 since it came out. Can I advise me please? Thanks.

    Please read these and proceed accordingly (restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be of special interest):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    http://forums.adobe.com/docs/DOC-2325

  • Why I-Photo would keep Crashing/ Freezing on me and causing me to force quit.

    why I-Photo would keep Crashing/ Freezing on me and causing me to force quit.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT201272 My App Store keeps crashing when I try and go into purchased, what do I need to do?

    What dose my App Store keep crashing when I try and go into purchased and what do I need to do to fix it?

    Whooney wrote:
    When I press edit on a photo the phone turns off and restarts. What do I do to stop this from happening?
    Stop doing that. 
    Seriously though... does this happen when attempting to edit one specific photo or all photos?

Maybe you are looking for

  • Upgrade from 9.2.0.6 to 9.2.0.7

    Hi, We're planning to upgrade from 9.2.0.6 to 9.2.0.7 on one development machine which has 5 database and I just want to install the patch for one database. Any advices and any issues with 9.2.0.7. Regards, Umair

  • ADF Bindings Servlet/Filter  not invoking  Faces Servlet

    I'm getting ADF Faces and Facelets working properly with pages written in jspx format, but the Faces Servlet being mapped to jsf format. The problem I'm getting is while displaying ADF Tables with data retrieved from the database using Toplink and bi

  • Custom widget triggers - or call widget functions

    The title says it ! Take for example three scenarios: 1. We have a lightbox display with several slides. Each slide has interactive content like buttons. Some of the buttons will cause the lightbox to close but at the same time we need the close butt

  • Adobe premiere elements.exe entry point not found

    adobe premiere elements.exe entry point not found how do I fix this error message and run the program?

  • Video podcasts not showing up on iPod

    Since the recent update of my iPod, my video podcasts are not syncing to my iPod.  When I sync with iTunes, I have all the podcasts (both audio and video) selected to sync but only the audio podcasts are available to me via my iPod.  What's going on