Motion calibratio always on (running in background)?
i have an issue where motion calibration is constantly being used and it's running in the background for no reason.
The crazy thing here is it will run properly if I allow it to run once, transfer the file and receive it, and let the program complete and teminate.
If I attempt to set this class in a loop I get the thrown exception. I would really like to have this run in background and continue to run and not terminate after each Send and Receive. Is there a way to do this?
The diagram for this would be:
1. Run and wait for sender to send file.
2. Receive the file and write it out to the local dirve.
3. Notify the client the send was successful.
4. Go back to sleep and wait for another file to be sent.
Similar Messages
-
I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?
Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps -
Data is missing in Even Page when report running in background (spool)
Hi
I have this weird problem in my report. The report would run in background convert the data in to PDF from spool and then email it to people.
Now when the PDF has more then 1 page the error occurs.
It drops the last row from the even page. The total at the end and every thing shows correctly. If there r more than 2 pages then on page 3 the last row is not dropped and its all fine but again on page 4 it drops one record and on page 5 again its working fine.
One thing is it also puts an extra line(horizontal line which is not in the code) on those pages where its unable to put the record and its always the last one on the even page. I also looked up the spool. Its doing it in the spool too. So i think its not the PDF converter its when the spool is getting created for some reason its droping the rows for the even pages...
Did any one else encountered some thing like this? please help.
Thanks
Message was edited by:
Anwarul Kabiris there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
Please Help! -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
URGENT!pls hlpDAC Full Load always in 'Running' status at a particular task
Hi Friends,
I started a full load yesterday.There are totally 257 tasks.The load went fine without issues till 248th task.But while executing 249th task(Load into Activity Fact),it is always in 'Running' status and is not getting completed even after executing for 2 hours. I checked in the informatica workflow monitor and found that the workflow is in 'running' state and is not getting completed. When right-clicked the session and selected run properties,I can see that 0 rows are inserted into the target table.So I manually tried to stop the workflow.Even after that the task is always in 'Stopping' status and is not getting stopped.Then I manually aborted the workflow.
Below is the session log file.Could you please check and let me know.
Regards,
Vijay
Edited by: vijayobi on Jul 22, 2011 4:26 AMHi Friends,
We executed a Full-Load again on Saturday i.e 23rd July 2011.This time we allowed the task 'Load into Activity Fact_CUSTOM' to execute without stopping it manully like we did in the previous data load.It got executed for 3 hours and 45 minutes and then 'Failed' giving the following error ORA-01652(unable to extend temp segment by string in tablespace string).This task got executed successfully in our dev environment.Below is what we found in the sessio .log file and help us resolve this issue.Please revert back as soon as possible as we have this issue in our prod environment.
2011-07-23 14:56:07 : ERROR : (8128 | LKPDP_25:READER_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : RR_4035 : SQL Error [
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
Database driver error...
Function Name : Execute
SQL Stmt : SELECT distinct LOOKUP_TABLE.ROW_WID AS ROW_WID, LOOKUP_TABLE.GEO_WID AS GEO_WID, LOOKUP_TABLE.INTEGRATION_ID AS INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT AS EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT AS EFFECTIVE_TO_DT FROM W_PARTY_D LOOKUP_TABLE,W_ACTIVITY_FS LEFT OUTER JOIN W_CUSTOMER_ACCOUNT_DON (W_ACTIVITY_FS.CUSTOMER_ACCOUNT_ID=W_CUSTOMER_ACCOUNT_D.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=W_CUSTOMER_ACCOUNT_D.DATASOURCE_NUM_ID)WHERECOALESCE(W_ACTIVITY_FS.CUSTOMER_ID,W_CUSTOMER_ACCOUNT_D.PARTY_ID)=LOOKUP_TABLE.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=LOOKUP_TABLE.DATASOURCE_NUM_IDAND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) >= LOOKUP_TABLE.EFFECTIVE_FROM_DT AND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) < LOOKUP_TABLE.EFFECTIVE_TO_DTORDER BY LOOKUP_TABLE.INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT, LOOKUP_TABLE.ROW_WID, LOOKUP_TABLE.GEO_WID -- ORDER BY INTEGRATION_ID,DATASOURCE_NUM_ID,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,ROW_WID,GEO_WID
Oracle Fatal Error
Database driver error...
Function Name : Execute
SQL Stmt : SELECT distinct LOOKUP_TABLE.ROW_WID AS ROW_WID, LOOKUP_TABLE.GEO_WID AS GEO_WID, LOOKUP_TABLE.INTEGRATION_ID AS INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT AS EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT AS EFFECTIVE_TO_DT FROM W_PARTY_D LOOKUP_TABLE,W_ACTIVITY_FS LEFT OUTER JOIN W_CUSTOMER_ACCOUNT_DON (W_ACTIVITY_FS.CUSTOMER_ACCOUNT_ID=W_CUSTOMER_ACCOUNT_D.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=W_CUSTOMER_ACCOUNT_D.DATASOURCE_NUM_ID)WHERECOALESCE(W_ACTIVITY_FS.CUSTOMER_ID,W_CUSTOMER_ACCOUNT_D.PARTY_ID)=LOOKUP_TABLE.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=LOOKUP_TABLE.DATASOURCE_NUM_IDAND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) >= LOOKUP_TABLE.EFFECTIVE_FROM_DT AND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) < LOOKUP_TABLE.EFFECTIVE_TO_DTORDER BY LOOKUP_TABLE.INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT, LOOKUP_TABLE.ROW_WID, LOOKUP_TABLE.GEO_WID -- ORDER BY INTEGRATION_ID,DATASOURCE_NUM_ID,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,ROW_WID,GEO_WID
Oracle Fatal Error].
2011-07-23 14:56:07 : ERROR : (8128 | LKPDP_25:READER_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : BLKR_16004 : ERROR: Prepare failed.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8333 : Rolling back all the targets due to fatal session error.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_PARTY_D_With_Geo_Wid], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXP_Decode_CustomerId], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXP_Decode_CustomerId], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_CUSTOMER_ACCOUNT_D_With_Party_ID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_CUSTOMER_ACCOUNT_D_With_Party_ID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXPTRANS], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXPTRANS], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [FIL_ETL_PROC_WID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [FIL_ETL_PROC_WID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [MPLT_Get_ETL_Proc_WID.Exp_Decide_Etl_Proc_Wid], and the session is terminating.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8325 : Final rollback executed for the target [W_ACTIVITY_F] at end of load
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [MPLT_Get_ETL_Proc_WID.Exp_Decide_Etl_Proc_Wid], and the session is terminating.
2011-07-23 14:56:07 : INFO : (8128 | MANAGER) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : PETL_24007 : Received request to stop session run. Attempting to stop worker threads.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8035 : Load complete time: Sat Jul 23 14:56:07 2011
Thanks in advance.
Vinay -
When MRP run through background process in MDBT open PR and PO not comming?
Hi,
When MRP run through backgroung process in MDBT open PR and PO not coming in MDBT result.
Pls advise accordingaly.
Regards
rkRam,
Either I am totally misunderstanding your statements, or your business people are misinformed.
The output of MD01 (MRP total run in foreground) and the output of MDBT (MRP total Run in Background) ARE IDENTICAL, provided you have selected the same parameters.
Neither output contains a discrete listing of open Purchase orders and Purchase requisitions.
Standard output of both MD01 and MDBT are:
1. List of materials processed, with exception messages
2. Statistics
In addition, both of these programs also write MRP records to the MRP databases, provided that the "Display Material List" parameter is set. In this case, both of these programs will produce data that can be further reviewed and managed in MD05 and MD06. MD06 is the tool that most planners use to process the MRP database info.
If you wish to see a listing of the entire MRP results (either MD01 or MDBT), then execute transaction MDLD. This will produce either a spoolfile or a printed document.
For the PO or PR listings, review my earlier suggestions.
Rgds,
DB49 -
GUI_GET_DESKTOP_INFO is not worked when run in background
Dear all,
I want to retrieve the computer name using this function module. It is working fine in foreground but it returns no result when I run in background. Is there any other method to get the computer name in background? Thanks in advance.Problem solved using the following method:
DATA: BEGIN OF usr_tabl OCCURS 10.
INCLUDE STRUCTURE uinfo.
DATA: END OF usr_tabl.
DATA th_opcode(1) TYPE x.
data: size type i.
CONSTANTS: opcode_list LIKE th_opcode VALUE 2.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_list
ID 'TAB' FIELD usr_tabl-sys.
describe table usr_tabl lines size.
read table usr_tabl index size.
write usr_tabl-term.
while usr_tabl-term is the computer name. It works in background as well.
Edited by: Chiew Ngee Ho on Mar 12, 2009 9:36 AM -
Error when OO ALV report run in background
Hello all,
We recently applied stack 12 for a 7.0 system. My custom ALV report using CL_GUI_CUSTOM_CONTAINER coding now returns an error when run in Background. It works fine in dialog.
The error occurred in program CL_GUI_CUSTOM_CONTAINER=======CP. The log message was "Control Framework: Fatal error - GUI cannot be reached".
Is there a solution for OO ALV reports run in the background? I would not like to re-write my ALV reports using the function call. Any advice is appreciated. Thanks!!Yes, you need to code it a little differently, but you can still use CL_GUI_ALV_GRID. Here is an example.
REPORT ZRICH_0006 .
DATA: ITAB TYPE TABLE OF MARA.
DATA: R_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: R_CONTROL TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: G_DOCK TYPE REF TO CL_GUI_DOCKING_CONTAINER.
DATA: OKCODE type sy-ucomm.
START-OF-SELECTION.
SELECT * FROM MARA INTO TABLE ITAB up to 100 rows.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
IF R_CONTROL IS INITIAL.
* Check whether the program is run in batch or foreground
IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
* Run in foreground
CREATE OBJECT R_CONTROL EXPORTING CONTAINER_NAME = 'CONTAINER_1'.
CREATE OBJECT R_GRID EXPORTING I_PARENT = R_CONTROL.
ELSE.
* Run in background
CREATE OBJECT R_GRID EXPORTING I_PARENT = G_DOCK.
ENDIF.
CALL METHOD R_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'MARA'
CHANGING
IT_OUTTAB = ITAB.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OKCODE.
WHEN 'BACK'.
leave program.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Regards,
Rich Heilman -
How to download file to local system when report is run in background?
Hello all,
Can anybody tell me how can we donwload file into local machin when the program is running in background?
thanksHi,
We can't communicate with presentation server while processing in background.
if needed we can do this by creating RFC destination and doing some setting in Desktop system.
[Reference document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2]
Regards,
Amal -
File generated when program run in background
Hi,
I have program that generates a report & all the data in the report output is down loaded to a file .please somebody make it clear:
if I run the report in background will the file still be generated.
thanks,
reddy.Hi,
If the program has logic to transfer the data to appliacation layer, then it works. Other wise it is not possible to download the data into your desktop by running in Background.
Regards,
Ashok -
System is showing time out when run in background
Dear all,
We have two systems: One R/3 and EBP. We have made one report where the remote function module will be called from R/3 to EBP. There are 4 lakhs data in SAP. We are sending 10000 data as package in internal table and getting the corresponding output. But the system is showing time out when the report has run in background. Can you please suggest how the process can be improved so that the timeout can be avoided.
Thanks and regards,
AtanuHi,
Try to fetch records in smaller chunks and process them. For example, if you are trying to fetch records for one year, instead of single query, try to fetch in 12 sets for each month. Fetch first month and process the records and put them in the output internal table. Then go for next month and so on. Anyway your program is running in background. There will not be any user complaint also. The solution might sound bit funny. But it works.
Regards,
Hema -
RMMR1MRS-When run in background cause update failure errors looking
hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.Have you found a solution already? If so, please, share it with the community and close this thread.
-
Amount field getting rounded up when run in background
Hello All,
when i run a report in foreground the amount value(KBETR) is displaying properly with the value 12.78.But when the same report is run in background it is displaying 13.what should be done?
Thanks,
Rakesh.Hi,
Try to fetch records in smaller chunks and process them. For example, if you are trying to fetch records for one year, instead of single query, try to fetch in 12 sets for each month. Fetch first month and process the records and put them in the output internal table. Then go for next month and so on. Anyway your program is running in background. There will not be any user complaint also. The solution might sound bit funny. But it works.
Regards,
Hema -
Download Excel when program is run in background
Hi all,
I need help urgently in downloading my report into an excel file automatically when my report is has completed its run in background.
Appreciate if help can be provided.
Many thanks in advance.Check out the sample program of the provided link ..
http://www.sap-img.com/abap/download-in-background-in-excel-format.htm -
Getting the variant name when the report program is run in background
Hi All,
How to get the variant name for the report program when run in background? My requirement is to create an email attachement with the name 'variant.XLS', where variant = selection screen variant, when the report program is run in background. The system field SY-SLSET holds the variant name only when run online.
Any pointers to this will be highly appreciated.
Thanks and regards,
Nilesh.Hello Nilesh,
Please find the algo:
1. Call the FM: GET_JOB_RUNTIME_INFO to get the background job details.
2. Select data from TBTCP using these details:
DATA:
FP_EVENTID TYPE BTCEVENTID
FP_EVTPARM TYPE BTCEVTPARM
FP_ACTIVE TYPE BTCXPGFLAG
FP_JOBCNT TYPE BTCJOBCNT
FP_JOBNM TYPE BTCJOB
FP_STEPCNT TYPE BTCSTEPCNT.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
EVENTID = FP_EVENTID
EVENTPARM = FP_EVTPARM
EXTERNAL_PROGRAM_ACTIVE = FP_ACTIVE
JOBCOUNT = FP_JOBCNT
JOBNAME = FP_JOBNM
STEPCOUNT = FP_STEPCNT
EXCEPTIONS
NO_RUNTIME_INFO = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* Error calling FM: GET_JOB_RUNTIME_INFO
ENDIF.
DATA: FP_VARIANT TYPE BTCVARIANT.
SELECT JOBNAME JOBCOUNT STEPCOUNT VARIANT
FROM TBTCP
INTO TABLE L_IT_TBTCP
WHERE JOBNAME = FP_JOBNM
AND JOBCOUNT = FP_JOBCNT
AND STEPCOUNT = FP_STEPCNT.
IF SY-SUBRC = 0.
SORT L_IT_TBTCP BY JOBNM JOBCNT STEPCNT.
READ TABLE L_IT_TBTCP INTO L_WA_TBTCP INDEX 1.
IF SY-SUBRC = 0.
FP_VARIANT = L_WA_TBTCP-VARIANT.
ENDIF.
ENDIF.
Hope this helps.
BR,
Suhas
Maybe you are looking for
-
Unable to respond to Calendar Invitations
I seem to be running into a strange bug and am curious if anyone has seen this before. On all of my devices (iPhone, iPad, and iMac), I am unable to respond to a Calendar event. On the iOS devices, when I tap on a response, it displays in the calend
-
How do I extract pages from a current open pdf via script?
I am using the following script to extract all pages to seperate pdf files, but nothing happens?? var filename = "PageOutput"; for (var i = 0; i < this.numPages; i++) this.extractPages({ nStart : i, cPath : filename + i + ".pdf"})
-
How to see the data stored in the t.code: cat2.
Hi All I am doing Userexits here using CATS0006 exit.and T.code CAT2 i am entering values and i saved, it's showing data is saved. but i am not able to see that values, where it will store the data. Regards....
-
I have downloaded Adobe Reader X on an iPad in order to view electronic signatures already completed on documents. When I "open with" acrobat, the file is stored on the iPad in the "Documents" section and I need to be able to remove those for confid
-
Help, Discoverer Viewr Error 404
Hello, I have a problem. When I starting Discoverer Viewer\Plus (http://host.domain:port/discoverer/viewer) with httpServer,Agent etc. started appears error: HTTP 404 Page not Found. but the page http://host.domain:port appear correctly! Why ? Excuse