Labview: resource not found error code 24 when building executable using 8.20 and dsc module

I am trying to build an executable and I keep getting and error and cannot seem to figure out what is wring. The whole error is "LabVIEW: resource not found. An error occured loading "interface 3.vi" Labview load error code 24: this vi cannot be loaded because it is broken and has no block diagram."
I am using LV 8.20 and DSC 8.2. I am trying to create an executable that has the web server running for using remote panels, i have netowrk published shared variables, connecting to a fieldpoint unit, and I am using the NI system tray icon vis to load the program to the system tray.
I have my shared variable library added as a support file, as well as the lvdsc.ini, and the tray icon files. I have sleected "Enable Enhacned DSC run time support" in the app builder, did not remove any type def,etc.
I cannot get the .exe to run on my development machine or another machine, I get the same error. I tried creating an installer that installed the 8.2 runtime, dsc,fieldpoint, variable engine and manager and MAX.
I could not find anything in the help files on the dsc, maybe someone else has some hints. thanks
Kenny

Hi Kenny,
I hope you are doing well today! What is interface 3.vi? Is it possible for you to post your project over here? Also, I would recommend creating a simple DSC application; and would like you to build it. Do you still get errors?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

Getting 104 resource not found error, when deploying my first servlet

Hi,
I am new to servlets, and after doing little home work i have created a small servlet but i am i getting http 104 resource not found error.
steps i followed:
1) installed pre-configured version of tomcat from http://www.coreservlets.com/Apache-Tomcat-Tutorial/.
2)created new directory called ch1 under webapps, created WEB-INF under ch1
3)included web.xml, classes in WEB-INF directly
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd"
version="2.5">
<servlet>
<servlet-name>Ch1servlet</servlet-name>
<servlet-class>Ch1servlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Ch1servlet</servlet-name>
<url-pattern>/servlet</url-pattern>
</servlet-mapping>
</web-app>
4) included .class file under classes folder from following Ch1servlet.java file, I have set class path to point to servlet-api.jar file and jsp-api.jar and compliled following java file to get .class file which is included in classes folder
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Ch1servlet extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException
response.setContentType("text/html");
PrintWriter out=response.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+
"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet</h1>"
+"<br>" + today + "</body>" + "</html>");
5) I am started tomcat server and when typed http://localhost( changed port from 8080 to 80), its giving tomcat page and not showing any error
6) When i typed http://localhost/ch1/servlet/Ch1servlet, its giving http 404 error
type Status report
message: /servlet/Ch1servlet
description: The requested resource (/servlet/Ch1servlet) is not available.
7) i have uncommented(it comes preconfigured) the invoker part in web.xml.
I have tried including servlet in an package and without package
I am not sure if its problem with server configuration orelse problem with my file placing.
Please let me know if you have any idea what went wrong.

I found this, unable to copy it, so i am typing it:
Feb11,2008 11:55:57 AM org.apache.catalina.core.AprLifecycleLIstener init
INFO: The Apache Tomcat Native Library which allows optimal performance in production environemnt was not found on the java.library.path:c:\program Files\Java\jdk1.6.0\bin;....
last line says
org.apache.cataline.startup.catalina start
INfo: Server startup in 657ms

Labview: resource not found ; Specifically a VI located in my LV 8.2 Project I am trying to download to my FP-2000 and run.

Hi,
I am fairly new to the LV Project method of building executable files and embeded applications.
I have been using LV 7.2 for the last few years and finally switched over to 8.2 this last summer.
My problem is that I have an embedded application that I need to troubleshoot, but every time I try and run it from my desktop, it hits me with one of these messages:
Deploying MPPT-Testbed (successfully deployed target settings)
Deploying ErrorConvert.vi (already deployed)
Deploying FP Close(IO).vi
Failed to download FP Close(IO).vi
LabVIEW: Resource not found.
LabVIEW: Resource not found.
The FP Close(IO).vi is the latest issue, I have had other files that have failed to load as well. I have attempted to make a common folder for all of my shared VIs, I have 6 FP-2000 controllers.
Any ideas?
I run LV 8.2 w/RT on my desktop, my FP-2000 is running LV 8.2, FP Drivers 5.2.0 and FP VI Manager 4.1.0
-Bill

Hi Bill,
Since you produced code in a previous version of LabVIEW, and therefore previous FieldPoint driver version, you will need to revamp your code a little to be able to use it in LV 8.2 with FieldPoint 5.0. I'm assuming that the FP Close.vi is not available in the palette that is not available in LabVIEW 8.2. This is expected, as FieldPoint 5.0 utilizes different VIs than previous versions. Accordingly, you do not need to use the FP Open or FP Close VIs, as they are not available in this driver version. However, you only need to use a Browse I/O Point and either a FP Read, FP Write or FP Read/Write. Generally, a quick modification of your code will take care of this problem. Let us know if you need help with this; a screenshot of your code might be helpful. Thanks!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

File Not Found error (-43) when trying to record

Never had this problem in the past, and haven't used Logic in a few months, but every time i attempt to record, i get that message: File Not Found, Result code error -43
I am using the MBox 2 Pro as my record in, and Logic 6.4.3
Thanks for the help...

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

Can't Download from iTunes Store - "Requested Resource Not Found" Error

I am trying to download a couple of (free) apps for my iPhone and iTunes is throwing up an error saying "The requested resource was not found. There was an error in the iTunes Store. Please try again later." Is anyone else having this issue at the moment? Is the store down?

It has been a few hours now. Same problem. "Resource Not Found" error when trying to download apps from the iTunes store. Anyone else having this problem? Anyone NOT having this problem? Anyone?

HT4060 Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It just seems to be exceedingly f

Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?

Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

LabVIEW: Resource not found. when running executable

Hi,
I've made a fully functional vi with LabVIEW 2009 (developer suite) and need to be able to run it on another PC without it. I have downloaded LV Run-Time 2009, but when I try to run the executable I built, I recieve an error which reads:
LabVIEW: Reasorce not found.
An error occurred loading VI 'NI_AALPro.lvliberivative x(t).vi'.
Labview load error code 3: Could not load front panal.
I can run the executable on another PC with LabVIEW no problem. I've read somewhere about the need to stop the front panal from beng removed on sub VIs with Application Builder, although I don't think I have it. I apologise in case this is a dumb question and I appreciate any help.
Cheers
Luke
Solved!
Go to Solution.

Removing or not removing the front panel probably has nothing to do with your problem. My guess is that you did not create an installer. If you had, it would have included lvanyls.dll in a data folder under the folder where your exe was installed.

Why do I get a boot drive not found error only when laptop lid has been closed?

I've got a HP Mini 210 P/Number: VX818EA with Windows 7 Starter.
It works fine when turning on after shutdown, but when I've put it to sleep by closing the lid it won't 'wake up', and I get a blank screen. On restarting the computer I get a 'boot drive not found' error, (3F0) which can be resolved by following the steps on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&tmp_task=solveCategory&lc=en&dlc=en&cc...
I've run disk check etc as suggested on that link, no errors are found, but nothing seems to resolve the problem more than temporarily. Seems odd that this only happens if I close the lid (sleep mode with the lid up is fine, doesn't crash the computer).
Can anyone advise?
Thanks

Hello,
Very strange, can you go to BIOS and reset the setting " By Default " ?. How did you check the disk ?
This is an unusual probleme Hp Mini 210 . And notice me after your reset the bios settings.

File not found error generated when i try to fill a file

Hi,
I try to fill a file with data come from SQL SERVER table. I got the following error:
7000 : null : java.sql.SQLException: File \\bonnie\FraisMission/FraisMission.txt was not found
java.sql.SQLException: File \\bonnie\FraisMission/FraisMission.txt was not found
     at com.sunopsis.jdbc.driver.file.u.a(u.java)
     at com.sunopsis.jdbc.driver.file.d.h.c.a(c.java)
     at com.sunopsis.jdbc.driver.file.g.a(g.java)
     at com.sunopsis.jdbc.driver.file.g.a(g.java)
     at com.sunopsis.jdbc.driver.file.w.executeBatch(w.java)
     at com.sunopsis.sql.SnpsQuery.executeBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Yet The file i try to fill exists. I use IKM SQL To File Append.
Somebody can help me please?
Thanks

in the ressource name box of your file model, when you push the search button ("...") do you see the file ?
Cause the problem can occur when you write directly the path without selectionning the file with the assistant.
Try this.
I think too that that you can't see the data by right clicking and selectionning View Data ?
Let me know the avancement...

Error 1003 when building executable

Hi, I'm using Labview 2010 on Windows 7 and I'm getting an error when I try to build an executable:
Error 1003 occurred at Open VI Reference in AB_Engine_EXE_Call_Write_Icons.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Create_Build_Application.vi->EBUIP_Global_OnCommand.vi->EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Select File>>Open to open the VI and then verify that you are able to run it.
VI Path: C:\Program Files\National Instruments\LabVIEW 2010\vi.lib\Platform\icon.llb\Read Icons from ICO File.vi
This happens even when I try to build a simple vi, like a random number generator.

Same problem here. Error 1003 and error 8 I encoutered often.
For error 8 during build process, I needed to save the executable on a higher level in the file hierarchy.
For error 1003, I did not find a solution. Restarting LabView does not help. Sometimes (but not always) restarting the computer helps. Sometimes I need to reinstall the labview system.
More details: I have a first vi, starting the actual vi with a hidden front panel (second vi). This vi can also be started directly. Sometimes, the build process runs smoothly then when I include the second vi as main vi to start the program.
The program runs fine when the build process succeeds, and it runs fine in LabView.

When i go to gmail it says "Not Found. The requested URL/accounts/service login was not found on this server" but it used to work and I need help getting it to work again.

I used to go to gmail all the time. Now it says "Not Found" whenever I go to gmail. Is there a reason for this and is there a way I can access gmail again?
== URL of affected sites ==
http://gmail.com

You've been really helpful and I did what you said, but I'm still having a problem. I click on "tools", then click on "Add-ons", and when the box opens I click on "extensions". This is the problem" In the "Add-on" box under "extensions", it says "'''Microsoft.NET Framework Assistant''' 1.0. Adds ClickOnce support and the ability to report installed .NET versions to the web server. '''Not compatible with Firefox 3.6.3.'''" And underneath there are 3 boxes to click on: "options", "enable", and "uninstall". But it won't let me click on any of them. Also, the first thing before the text I just copied, is a red explanation point. This is the only thing that comes up under "Extensions". Any ideas? I'd appreciate any input. Thanks

Not delivered error message when sending photos using messages

When using messages on iPhone 5 to send photos, I receive a not delivered error but the recipient tells me it has been received. I have tried turning phone off/on, signing out of messages on all devices then signing back in. Still occurring. Any ideas??

Bump. I have the same problem. Anyone shed some light on this?

404 resource not found error

So I'm debugging my application when I suddenly start getting this error:
No resource found (404)
The requested URL /content/adeparchitecture-debug/adeparchitecture.html resulted in an error in org.apache.sling.servlets.resolver.internal.defaults.DefaultErrorHandlerServlet.
Request Progress:
      0 (2011-08-31 13:25:37) TIMER_START{Request Processing}
      0 (2011-08-31 13:25:37) COMMENT timer_end format is {<elapsed msec>,<timer name>} <optional message>
      0 (2011-08-31 13:25:37) LOG Method=GET, PathInfo=/content/adeparchitecture-debug/adeparchitecture.html
      1 (2011-08-31 13:25:37) TIMER_START{ResourceResolution}
      3 (2011-08-31 13:25:37) TIMER_END{2,ResourceResolution} URI=/content/adeparchitecture-debug/adeparchitecture.html resolves to Resource=NonExistingResource, path=/content/adeparchitecture-debug/adeparchitecture.html
      3 (2011-08-31 13:25:37) LOG Resource Path Info: SlingRequestPathInfo: path='/content/adeparchitecture-debug/adeparchitecture.html', selectorString='null', extension='html', suffix='null'
      3 (2011-08-31 13:25:37) TIMER_START{ServletResolution}
      3 (2011-08-31 13:25:37) TIMER_START{resolveServlet(NonExistingResource, path=/content/adeparchitecture-debug/adeparchitecture.html)}
      4 (2011-08-31 13:25:37) TIMER_END{1,resolveServlet(NonExistingResource, path=/content/adeparchitecture-debug/adeparchitecture.html)} Using servlet org.apache.sling.servlets.get.DefaultGetServlet
      4 (2011-08-31 13:25:37) TIMER_END{1,ServletResolution} URI=/content/adeparchitecture-debug/adeparchitecture.html handled by Servlet=org.apache.sling.servlets.get.DefaultGetServlet
      4 (2011-08-31 13:25:37) LOG Applying Requestfilters
      4 (2011-08-31 13:25:37) LOG Calling filter: org.apache.sling.security.impl.ReferrerFilter
      4 (2011-08-31 13:25:37) LOG Calling filter: org.apache.sling.i18n.impl.I18NFilter
      4 (2011-08-31 13:25:37) LOG Calling filter: com.adobe.ep.taskmanagement.task.service.FormsRedirect
      4 (2011-08-31 13:25:37) LOG Calling filter: com.adobe.aes.aesop.j2ee.impl.UserTransactionCleanupFilter
      4 (2011-08-31 13:25:37) LOG Calling filter: org.apache.sling.engine.impl.debug.RequestProgressTrackerLogFilter
      4 (2011-08-31 13:25:37) LOG Calling filter: com.adobe.livecycle.crx.security.SpringSecurityBridgeFilter
      4 (2011-08-31 13:25:37) LOG Calling filter: com.adobe.livecycle.content.sling.impl.ResourceResolverFilter
      4 (2011-08-31 13:25:37) LOG Calling filter: com.adobe.livecycle.content.appcontext.impl.AppContextFilter
      4 (2011-08-31 13:25:37) TIMER_START{org.apache.sling.servlets.get.DefaultGetServlet#0}
      5 (2011-08-31 13:25:37) TIMER_END{1,org.apache.sling.servlets.get.DefaultGetServlet#0}
      5 (2011-08-31 13:25:37) TIMER_START{handleError:status=404}
      6 (2011-08-31 13:25:37) TIMER_END{1,handleError:status=404} Using handler org.apache.sling.servlets.resolver.internal.defaults.DefaultErrorHandlerServlet
      6 (2011-08-31 13:25:37) TIMER_END{6,Request Processing} Dumping SlingRequestProgressTracker Entries
Any idea what could be causing it? I just started happening, I didn't do anything to cause it or change anything on the server.

Did a clean on the project and it started launching again.

The type library information for 'TestStand IVI Step Types' was not found (Error code: -18351)

Hi,
I get the error in the message subject when I add an IVI-C step (no matter IVI Power Supply, IVI Dmm or others) and try to edit the step by pressing Ctrl+E (or double-click the step and click "Edit IVI Power Supply" for instance).
I have installed 2 IVI-C libraries that I downloaded from 'NI idnet' both with IVI technology (namely agn330xa_MS.msi and agn6700_MS.msi). They can both be seen in Add/Remove programs under "NI IVI Specific Drivers" group.
The error message says "Make sure the server is registered".
Does anybody know what server is it complaining about and how can the registration be done?
Regards,
S. Eren BALCI
www.aselsan.com.tr
Attachments:
error 18351.jpg ‏66 KB

Hi ebalci,
I believe this error is occurring because the ActiveX components that are used by the IVI step types are either not properly installed or not properly registered. I would recommend first making sure that the IVI compliance package and NI-VISA are installed on the system. If both of these are already installed, I would recommend running the TestStand Version Selector because this should re-register the ActiveX components used by the IVI step type. The TestStand Version Selector can be found by going to the Start Menu>>Programs>>National Instruments>>TestStand 3.5. You will need to select the version of TestStand you want to use and click the "Make Active" button. I have also pasted links below to VISA and the IVI compliance package. Hope this helps!
NI-VISA
IVI Compliance Package
Pat P.
Software Engineer
National Instruments

Labview: resource not found error code 24 when building executable using 8.20 and dsc module

Similar Messages

Maybe you are looking for