Mouse moves page or magnifies page when moving across page in excel

when using the mouse it suddenly moves a page, magnifies it or goes to a different screen. It is especially annoying when using Excel when you are moving from one cell to another. I have slowed the tracking speed, but this does not help. Does anyone have a solution?

Hi edwardfromcoalville!
You may want to learn about the gestures that are turned on by default on your Apple Magic Mouse. Information on those (and how to turn them off) can be found here:
Magic Mouse: Enabling gestures
http://support.apple.com/kb/ht4144
You can also find information on these gestures here:
OS X Mountain Lion: Learn trackpad and mouse gestures
http://support.apple.com/kb/PH11377
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

White Balance Selector Disappears when moved across the image

Hi
I am using LR 4.4 on an iMac.
Does anyone know why the White Balance Selector tool would disappear when moved across an image?
it seems to change to a vertical line with an arror top and bottom.
The areas of the image on which it disappears seem to be consistent, in other words, it disappears on the same portion of the image eveytime.
UPDATE: Since posting the above a few minutes ago I've noticed that my cursor is behaving eractically. For example, on a different image to the one used above, in the library module using the Loupe the cursor changes from a magnifying glass to an arrow pointing to the right. It does this on the same part of the image every time.
Thank you for your help
Regards
Message was edited by: iwaddo

Weird cursor problems are a FEATURE of the APPLE os.
There are complaints on the APPLE os system website since 2005.
The last time I checked there were 30 pages of discussions about this on the apple site
https://discussions.apple.com/community/mac_os/os_x_mountain_lion.
I don't think APPLE has a clue as to how to fix this. It is seen in many apps, photoshop most commonly, lightroom,textedit,exxcel, and others.
Pray that something happens in soon to be released 10.8.4.
vince

I'm having a minor problem with "screen drift" - the page moves slightly up and down when moving my mouse around the screen, and continues to do so after stoppi

I've installed the latest version of Shockwave, updated the driver from Logitech for my mouse (Logitech M525), tried both full screen and regular modes, restarted Firefox repeatedly. This drift is very annoying - I spend the majority of my time on FB - seems like the amount of drift varies from not at all to "damn it, I can't even place my mouse on an object without the screen moving".
I'm on Windows 7 with an Acer V5-671 laptop - help please!

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

On any web sites displaying flash or large gifs, Firefox intermittently and repeatedly disconnects USB mouse, especially when moving across page links

Firefox ver. 3.6.13 /machine is Acer dual core AMD/4 gigs memory maybe 18 months old.
This problem does not occur using IE or chrome.
Is the Flash player handling disk I/O in such a way as to trigger hardware resource conflicts? Is Mozilla image caching a cause?

''the-edmeister [[#answer-666854|said]]''
<blockquote>
'''''"I created a second profile called Shopping. I imported the extensions from my default profile into it."'''''
If you used Sync to do that "import", disable Sync for at least one of those Profiles.
</blockquote>
Thank you for your suggestion. I have Sync enabled for all the profiles. To my surprise, however, Sync was of no use in getting Default's extension collection into Shopping. For that I had to resort to the article http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox.
I will try disabling Sync on Shopping.

Adobe Premiere Elements 11 in the 'minimize' state "tracks" when moved across screen...

I have finally found time to work on and to learn how to use my recently purchased Adobe Premiere Elements 11 (APE11) and Adobe Photoshop Elements 11, using Adobe’s respective ‘Classroom In A Book’ training aid I recently purchased. To my disappointment when I open Adobe Premiere Elements 11 in the 'minimize' state it “tracks” when I try to move it across the screen, (see images), making it impossible and unacceptable to use. It only happens with APE11 and not with Photoshop, Premiere Organizer, MS Office Suite Programs (Word, Excel, PowerPoint, Outlook, Etc.), or any other programs on my computer. Also, the “tracking” doesn’t happen to a video within the APE11 video working space. I have installed this instance of APE11 twice to no avail using the Adobe defaults. See the added images for the current configuration of my PC and the APE11 version I have. I noticed in APE11’s Properties that I don’t have Compatibility checked-off because I never have had a previous version (see image). I do the Microsoft & Windows 7 updates regularly. This PC was purchased and configured to work on photo and video editing & manipulation, along with my everyday use. [Purchased on 2/22/13 from a reputable company Computer Links, Burlington, NC 27215, 336-226-4738 Invoice# 148599, (Technician: Matt). I am not a computer science person, which is why I relied on Matt to configure my PC. As this appears to be an AEP11 issue I am relying on you to resolve the issue verse Matt. Your support with this is much appreciated.
I had one person kindly suggest "Could you try to update your graphic card drivers, if they are not current"? If I knew how to & where located on PC I would consider it, however I would think it would be current as it was new when PC was purchase 2/22/13 and if it was out-of-date why wouldn't the other programs on the PC also 'track', such as Adobe Photoshop Elements, MS Ofiice Suite programs, etc.? (PS: I thought I posted this in the Adobe Premiere Elements area 5/19/13, apparently I posted it in the "Downloading, Installing, Setting Up" discussions area instead, & didn't see a way to move it?? I started in APE11 Area.)

ATR and Reese,
It appears Matt solved my issue earlier today and I have been testing it without a failure.
Matt determined it was the Personailization "Themes" I was using. I had the Theme "Windows Classic" selected from the "Basic and High Contrast Themes..." group, and when he changed it to one of the "Aero Themes" the Adobe Premiere Elements "TRACKING" problem went away. He and I are not sure why it works by changing the theme, but it appears to. Using the Aero Theme continues toi allow me to use my own photos for "Desktop Background" and "Screen Saver".
The path to it is via the PC display by right clicking your mouse, select "Personalize", select one of the "Aero Themes" and go from there according to personal taste. See image below:
Note: Something for Adobe to consider going forward, if the above remains a solution. Matt says as I am using Windows 7 I have a selection between Themes, either "Windows Classic" from the "Basic and High Contrast Themes..." group or one of the "Aero Themes" (which resolved my Tracking problem), however Windows 8 did away with the "Aero Themes" and there isn't a choice then what? He isn't sure if there will be a tracking problem or not.
ATM any thoughts on why the above Themes setting would make a difference?
ATM thanks for all your help, along with Matt of Computer Links, Burlington, NC , 336-226-4738. I will update this posting as events occur, both good and bad.
Cheers and Regards,
Mike (Ghost1013)
<><><><><><><><><><><><>
Mike Higgins
>M&W Miniature Llamas
>>Gibsonville, NC 27249
>>>[email protected]
>>>>www.mwminillamas.com
>>>>><><><><><><><><><><><><>

How to display item when mouse moves over Column value??

Hi there
It would be helpful if you could resolve the following :
i) I need to display the column 'A' values of my report in a Text field when mouse moves over column B of my report.
ii) I can able to display the same column value when mouse moves over or onclick happens. but my requirement is something like i have to display the other column value when mouse moves over.
iii) Also i noticed that, i can able to display the item only on "Display only Item" and not on Text field.
Any pointers to display my column value in Text field when onclick happens on my report column?
iv) One more thing that i noticed, i can able to perform onclick or mouse over only on Editable column and not on
non editable columns.
Any pointers on how to achieve the same when mouse moves over Non editable column of report?
Reference: I have created a dummy application (refer the following link), where i can able to display column value Salary on display only item using mouse move Event.
My requirement: when i click column Ename , the text field should show salary.
http://apex.oracle.com/pls/otn/f?p=56045:1
User:guest
Pswd: apex_demo
Any pointers on this would be appreciated.
Thanks
Vijay

Vijay,
If you use Jquery then this should do the trick.
$(document).ready(function() {
   $(".t20Report t20Standard tr").hover(function() {
     $("#P2_SALARY").attr("innerHTML",$(this).find("td:last input").attr("value"));
{code}
after looking at the source of your page it seems that your class for your report region is *class="t20Report t20Standard"* I am not 100% sure but you might have to correct that in the template. I am not sure how the selector will handle the space in the class name.
Hope this helps,
Tyson

Mouse pointer does not stick on fader when moving it

Using Logic Pro 9. If I grab any fader, the mouse pointer turns into a small dot. If I then drag the fader up or down, the dot does not stick on the fader. Instead, I find I have to drag the dot well above or below the fader to make big adjustments. Is there any setting to control this? Or is this just how it is in Logic. In all other audio applications I've seen, the mouse pointer sticks on the fader when moving it up or down.

No - haven't found a fix for this yet. I can only guess that maybe it wasn't as noticeable when display screens weren't so big. I'm running on a 27" iMac so the effect is quite pronounced. I supposed it could be argued that it gives you a finer grain of control to make small changes - but it really takes away from the 'feel' like you are moving a real fader.

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Error message when moving to a different page

Post Author: EvDev
CA Forum: .NET
I have an ASP.NET 2.0 and Crystal Reports 11.5 project that works fine
when it's being debugged and when it's on our test server, but when we move it
to our production server the user will receive an error message when moving to a
different page of the report. It's an
"Object reference not set to an instance of an object". It seems very
odd for me for something to work on the test server but not on production. Has
anyone seen this before? Thanks

Hi there,
This does seem like a very valid process to be sure
I'm guessing that the fix is shown in "Solution 1" in this doc;
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080b04158.shtml
Cheers!
Rob

Why page is being unpublished when moving from Manage Content and Structure ?

Hello,
I am getting strange behavior in Manage Content and Structure as below :
when I move published pages from site 1 to site 2 , all moved pages in
site 2 are being unpublished !!
and mention below status :
Status: Checked in and viewable by authorized users.
how to move pages from
Manage Content and Structure so that I don't need to publish the moved pages manually ?
Thanks and Regards,
Dipti
Dipti Chhatrapati

http://www.dotnetspark.com/links/28950-move-page-site-content-and-structure-alters.aspx
http://social.technet.microsoft.com/Forums/en-US/c614408f-d6cf-4d8a-9ab0-46b2ef405824/move-page-in-site-content-and-structure-alters-revision-history-and-makes-old-content-available?forum=sharepointadminlegacy
This is a default behavior as a new content is added to site 2 with a different metadata so it is marked as unpublished

After web page finish, mouse movement and scroll up down very slow.

After web page finish loading,both mouse movement and scrolling that page is very slow.
I compare the same page on MS internet explorer and have no problem.
p.s. I'm using intel core 2 dual on 4gb ddr3 windows vista 32bit.
== URL of affected sites ==
http://www.sanook.com

Thanks for both of these answers. I am finding that I do not
like the totally manual method all that much (but it does work).
Using the PrintScreen-before-and-after-each-action method seems a
little better for me. Either method requires way too much editing
for a simple "let me show you" movie. I have moved on to version 3
since it seems to behave a little better.
I think it is odd how sometimes Captivate puts an action
(like a mouse click) on a background from *two* slides previous.
Why would it ever go backward - especially skipping over the
previous slide to get an even older screen. If I have forced a
screen capture, you would think it would stay with that.
I realize that I am not using Captivate where its strengths
seem to be (eLearning) but there must be a lot of people capturing
demos of web-based material. Does everyone have this
problem?

When moving a page from one pdf to another I see a message "consolidating fonts" and the added page does not view properly

I am working with multiple PDF files in Acrobat Pro XI. Sometimes when I move a page from one PDF to another it does not view properly. It was fine in the source PDF, but not when moved to the desired PDF. I also see a message momentarily across the bottom of my screen that says "consolidating fonts". What must I do to fix this?

Lloyd ,
Follow these steps for Acrobat 11 .
Launch Acrobat>Tools>Print Production>Acrobat Distiller
Now in Acrobat Distiller follow these.
Select Standard in Default settings.
Go to Settings and select Edit Adobe PDF Settings.
Select Fonts and in the font source window select the fonts you want to Add.
Click Save As and then OK.
See if this helps.
Regards
Sukrit Dhingra

When I move pages from one document to another, it creates a new alternate layout.

Hello,
I'm having an issue with combining some documents. Usually I use the "move pages" command and tell the pages to integrate with another document. However, because of the new alternate layout feature, both documents have the default layouts as "Letter V". So when I move pages from one document to the end of another, it creates a new alternate layout labeled "Letter V2" and "Letter V3" etc. Is there a way to make the pages just go into the main layout of Letter V without creating a new alternate layout? How do I merge alternate layouts created in the integrated document? All documents are the same page size and orientation.
Thank you kindly,
Sheena

Petrill,
Thank you. I was trying to do that yesterday, but it was grayed out. It seemed to work alright today.
Thanks,
Sheena

IWeb movie pages, when published -- no movies

my iWeb movie pages, when published, came up lame, no movies, only areas where the movies should have been, all with faint Q's with question marks inside them
LONG STORY SHORT, MAKE SURE YOUR MOVIES (as well as being located in your MAC HD and its proper MOVIE sidebar, that you CUT AND PASTE all your MEDIA YOU'RE USING IN YOUR iWeb SITE,
CUT AND PASTE PHOTOS, MOVIES in dupe form right into your desktop where you've published your iWEB site folder.......that way, any browser, a .mac or outside web host, can locate your media better so that you don't get GHOST MEDIA PUBLISHING LIKE I DID...hopefully this will help both of us
ALSO, in any iWeb website (named SITE in your desktop, or iDisc, or whatever or wherever you publish it, or even if you can find where on earth on your HD it is published, remember, if you have any MEDIA at all, NOTE IN MY CASE MEDIA MEANS MOVIES (not photos, so I'm not speaking to the photo blogs people, only iWeb MOVIE folks) anyway, all the compressed poetry video clips are right there, in a separate folder called MEDIA, that is every iWeb site, when published to .mac or a folder, which contains movies in .mp4 format or .mov format, all these will appear right in your site's MEDIA FOLDER....
this is important as a concept....
also, if you're using an outside web host like me (so that all my movies will LOAD QUICKLY), don't forget when FTP'ing (file transfer protocol'ing) your iWeb changes to your web host from your original MAC HD folder....remember to also send to the FTP/outside web host your MEDIA folder inside your SITE
(which i only realized a couple hours ago, and which totally was a revelation, so i'm passing it along to you guys)....
if you'd like to know exactly what i do here in nyc, i video the poetry scene, now for 20 years, and create educational poetry DVDs.... and my website is today's equivalant of operating a virtual business.....
....oh-oh, since I video poetry in NYC and go direct into a standalone DVD recorder to make single tracks of each poem...and then through Popcorn's mp4 program, I can make a movie file
then..through QuickTime Pro's streaming compression system, reduce that file size to under 5 MBs,
well, after lots of headaches, i am able to have 200 streaming video clips on an iWeb site, which apple itself said was impossible, that iWeb was only geared for less ambitious projects
okay, so that is cool..until yesterday, when i began the whole process again with completely new poetry video clips....
first, the iWeb pages were designed correctly...that took time....then i published the new pages to .mac, and only some of the movies showed up on the published pages, some had a big bright Q (which means the browser identifies the movie and will within 20 seconds load that movie), but what wracked my brain all day and night yesterday, why were there areas where the browser only showed the faint Q/Question mark inside (meaning the browser cannot find the movie)
so what the.....!
also i'm going from an iWed Folder to an FTP so I can use an outside web host and bypass THE MUCH SLOWER .mac browser (too slow when using movie clips for visitor to your site having to wait valuable seconds for **** movie to appear...with outside web host process almost immediate)
.....any similar experiences?

I am having the same problem.
Now I am using iWeb 2.03. So when I uploaded the site to my server I see the Media folder you were talking about, and the videos are there. But when I go to the website I still get the faint Q with the question mark.
Here is my site. http://mnorland.dadeschools.net
The videos are supposed to be in the Athletics page, then go to football highlights.
Any help would be appreciated.

HT4930 My mouse suddenly started lagging when moving up and down. Left and Right seem to move fine. Waht's wrong?

My mouse has suddenly started lagging when moving up and down. Left and right movement seems fine. in fact, it's perfect. I tried changing the tracking speed to no avail. it sped up the left and right movement, but "up and down" still remain sketchy. HELP!!

Hi Torrence,
You may have to suffer until you can get to your local artist's products store. There you should be able to buy square metres of fine matt black felt (maybe in a shop selling materials too). This makes an excellent and inexpensive base that looks good too. Have used it for years.
Lay it on your desk and hold it in position with some double sided sticky tape.

Mouse moves page or magnifies page when moving across page in excel

Similar Messages

Maybe you are looking for