Mouse wheel to scroll

Hi all!
Every time I open Adobe Reader XI, I want to use the scroll wheel of the mouse to scroll down the document. Instead, the mouse wheel zooms the current page.
Specifically, I set the zoom to "fit one full page at a time", and I want to quickly scroll through the pages. I could do that with the "next page" button or the arrows, but using the mouse wheel would be more convenient. So, can I do it? And how?

Maybe reserve the Shift modifier for this.
*mousewheel.with_shift.action;<strike>2</strike> 1
*mousewheel.with_shift.delta_multiplier_y;9999
''(edit: fixed action value from 2 to 1)''

Similar Messages

Why does my mouse wheel only scroll up in the catalog. It works correctly in every other program.

When in a catalog folder and showing a single picture, the mouse wheel only scrolls up, not down. This behavior is not seen in any program other than elements. If more than one line of pictures is showing in the window, it works fine, both up and down scrolling.

Hi All,
Please refer to the following article and do the needful:
Photoshop Elements Help | Photoshop Elements hotfix 13.1.1
It should solve the scrolling issue.
Thanks,
Anwesha

Using the mouse wheel to scroll, now jumps a few albums at a time unlike before

help! Using the mouse wheel to scroll, now jumps a few albums at a time unlike before ><
In the past I was just able to go into the mouse control settings in control panel and reduce wheel scrolling to 1 page at a time. Now i'm not able to scroll one album at a time anymore, even though my mouse control panel is still set to scroll at one page at a time. Its skipping two albums ahead now and I can't pin point to the album I want now unless if I click on it. I haven't used ituens in awhile so it must be something new on the last 2 updates, I don't see anything in the perference menu.
thx

I can't use the keyboard to scroll. I need to keep my hand on the mouse, otherwise I'd never get anything done. Since I have no problem getting Firefox to scroll one page at a time, and I'm constantly jumping between 3 browsers, it would be nice to be able to scroll a full page at a time in Safari, just like I can in Firefox. Thanks.

Can I get my mouse wheel to scroll page up/down instead of a couples lines?

In Windows, there was an option to have the mouse wheel scroll in page increments. I think this is much better ergonomically (less scrolling). Is there a way to do this on the Mac?

hey Lodinick,
I'm actually trying to get my mouse to do what you're complaining about. My search led me to your post, LOL.
I have a programmable logitech and I can't seem to find an option to assign the scroll functionality. I can change what happens when I click the scroll wheel, but not what happens when I scroll it up or down.
To help you:
1. If you have a programmable mouse, try digging in the software for that mouse.
2. If not try looking in Windows mouse settings.
If I find how to make it work on my mouse I'll try to remember and come tell you how to undo it.
// Juston

JScrollPane - Set the rate of the mouse wheel for scrolling

Hi,
I'm curious to know a little more about the mouse wheel used for scrolling in a JScrollPane. I'm using it for a JTextComponent at the moment, but the scroll rate is really slow.
Is this because of the way swing deals with the mouse wheel, and therefore can I increase the rate of scroll?
Or is it to do with the native OS and the way it processes mouse wheel events?
Cheers,
David

Hey John,
Scroll rate has nothing to do with the OS you'll be glad to know. As far as Swing goes, it doesn't in this case make any assumptions on how you want you 'views' to scroll.
I think LookAndFeel implementations often decide on default behaviour - I suppose this is in essence the whole point of the pluggable LnF framework.
Anyway, JTextComponent is an abstract class so I would not be surprised if it performs like a lame duck! You will however notice that it implements the Scrollable interface. Take a look at Scrollable.getScrollableBlockIncrement() and Scrollable.getScrollableUnitIncrement().
Overriding these methods will give you the behaviour you desire.
Warm regards,
Darren B

Mouse wheel stops scrolling page, and sometimes refresh does not refresh the correct tab, but the first one in the window.

I have 27 firefox windows open with a grand total of 141 tabs.
Some times the input is directed to the wrong window. I will click refresh and it will refresh the first tab in a window, but not the tab I am on. Apparently this also happens when I try and use the mouse wheel or the up and down arrow to scroll a page.
Some times it works correctly on 1 window, but when I switch to another scrolling stops working.
Usually rebooting the computer helps, but I should not have to do that.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why does my mouse wheel not scroll pages vertically

I have a Logitech M310 mouse. Since version 20 of Firefox, I find that after I open a webpage, my mouse will scroll the page vertically, but after a time period (usually +/- 10 minutes)< the mouse will not scroll the webpage at all.
I have tried disabling all my plug-ins and extensions, turning off hardware acceleration, changing the mousewheel.enable_pixel_scrolling variable to false and generally every other "solution" I can find on the web.
I have changed the mouse, tried the same version of Firefox an another computer and still cannot find the answer. Can anyone please help?
Windows 7 Home Edition on a Dell Inspiron N5110.
Many thanks.

Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar.
Type '''mousewheel.enable_pixel_scrolling'''. Its current value is '''False'''

Is there a way to change my mouse wheel's funtion so it will scroll with out

I'm stuck in habit that's hard to get out of. I started editing in Vegas then moved to Premiere CS3.
I never use the mouse wheel to scroll frames. I wish it could just zoom in and out of the timeline like it did in Vegas without me having to push alt-scroll wheel.
I'm might be asking for a lot but is this possible? I just can't break my habit of using just the arrow keys when I want to scroll frame to frame. Even though the alt-scroll has 'clicked' in my brain there's that 10% hesitation. That I know would make me more comfortable.
Call me weird but is there a solution?

Josh
Place the cursor over the Source or the Program Monitor and use the scroll wheel to scroll frames.
(Your post is not that clear whether you want to scroll frames or zoom the timeline as you mention both)

Mouse wheel scroll in forms?

Hello,
How we can activate the mouse wheel to scroll up and down on canvas it has scroll bar?
forms 10.1.2.0.2.
xp sp3.
Java Plug-in 1.6.0_23
Using JRE version 1.6.0_23-b05 Java HotSpot(TM) Client VM.
charles.

beans wrote:
Update to forms 10.1.2.3.0Hello,
Thank you for your reply.
How about the AS?is it need to update also?
So, Where can i get this update.Metalink?
Can you please post here the link to download if its available on OTN?
charles.

Scrolling/mouse wheel improvments (VTE-like) in urxvt

I like urxvt a lot, but there's one little thing that always annoyed me, especially since I used to use XFCE's terminal which, like (I assume) all VTE-based terminals, behaves differently.
Like pretty much all other emulators, urxvt supports using the mouse wheel to scroll in the terminal's buffer; But, unlike some others, that is all it does.
Other (VTE-based) terminals, when running an application that uses the "secondary screen"(*), will disable their scrollbar, and instead you can use the wheel to interact with said application. For example, when in `less` or `man` you can scroll around using the mouse wheel. And it's a really nice thing, because it feels very natural (to me, at least).
(*) not sure whether this is the "official" term or not, but at least that's how it's called in urxvt.
And it is the one thing that always annoyed me about urxvt: even in such applications, the mouse wheel will simply scroll through urxvt's own buffer. So I finally decided to grab the source code and have a look, and lucky enough it turned out to be pretty easy to change things.
Introducing a new option: secondaryWheel (ssw)
Yeah, that name might not be the best, but it goes along side secondaryScreen (ssc) - which is obviously required for this to work at all - as well as secondaryScroll (ssr) - with which, IMHO, it is somewhat related. So, there you go.
What this new option does, is pretty simple: when using the mouse wheel, if you're on secondary screen then no scrolling will occur, and instead some (3, to be exact) "fake" keystrokes will be sent to the running application. So, a wheel up will have the same result as pressing the Up key three times, and wheel down will do the same as pressing 3 times the Down key.
Easy enough, but that does the trick: now when running `man`, `less` or any other application that uses the secondary screen, you can use the mouse wheel to move around (or whatever said application would do, if you pressed the Up/Down keys). It should be noted that I'm not sure this is actually how things are done in VTE-based terminals - I never checked - but this does the job, so it works for me.
This is just another option (disabled by default), so you can either use it from command-line (ssw), or specify it in your .Xdefaults using it's long-name: secondaryWheel
Like I mentioned earlier, I believe this option is related to secondaryScroll, as in it works best if you disable it, while enabling secondaryWheel
That way, not only can you use your mouse wheel to scroll around in those applications, but whatever you do here will not "mess up" your scrolling buffer (on primary screen). That's how I use it, and I really like it that way.
Less blah, more download
The modified source code is available on this BitBucket repository. Note that it not only features this patch, but also this great one from rlblaster.
Or, you can also simply use this PKGBUILD.
Note: The PKGBUILD includes both patches, and also uses different compilation options (than the official package) to disable utmp/wtmp support and tabbed support. This is mainly because I don't use those, plus I beleive that utmp/wtmp doesn't actually work anyway (it would require setuid to be set, which isn't the case in the official package. Though, I did include the required lines (commented out) in the PKGBUILD; should you want to use it, you can simply uncomment them, and don't forget to change the options as well).
And of course bug reports, suggestions or any other form of constructive criticism is very much welcome.

Sorry for the necro-bump, but I found this thread while troubleshooting an issue with scrolling in urxvt.
This is the precise patch I was looking for, but the link to PKGBUILD in the OP's post is broken.
Here is the direct link to the AUR package: https://aur.archlinux.org/packages/rxvt … -scrolling
Also this patch is great. I moved over from Gentoo who includes this patch in the rxvt-unicode ebuild so I never really knew about it.
Moving to Arch caused some frustration as this patch wasn't included and I had no idea what was wrong.
Anyway, this package is great and I hope it's maintained forever and ever (or for as long as I use urxvt).

CS6 Mouse Wheel Scrolling for Fonts in Character Panel

in Illustrator CS6 I can no longer use my mouse wheel to scroll the list of fonts [which appear when you click the down arrow next to the font family] in the Character control panel. I could do this in CS5.
Anyone know how to fix this? I think it dos not work in Photoshop CS6 either.

Thanks Ivan for the quick response.
Yes, if I simply hover my mouse over the Font drop down it allows me to scroll through fonts [but only shows the single, selected font]. This is quite helpful, if I have text selected, scrolling through fonts quickly changes my selected text to the scrolled to font, allowing me to preview fonts fast.
While I do love and use the feature, I still often like to pull up the "full drop down list" of fonts like I've previously mentioned and use the mouse wheel to scroll through the list quickly. This enables me to see many fonts at once, instead of just a single one at a time. But again, this is where the mouse scroll wheel does not seem to scroll the list. I was able to scroll though the list in older versions of Illustrator CS.
I've attached screenshots to show the specific "list" i'm referring to, just so you fully understand what i'm talking about (which I think you already do).

Scrolling with mouse wheel in column browser starts from the start of the list

Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
How can I fix this problem?
I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
I shall file a bug report.
tt2

Mouse wheel scroll fails after viewing flash video

It appears that viewing flash videos on hulu or youtube "breaks" the mouse scroll wheel function. The rest of the mouse buttons remain unaffected - the forward/back buttons work fine, as does the mouse-wheel-click scroll and the mousewheel-left/right scroll.
The scroll function remains completely unaffected in other applications.
Closing the window or tab that had the "offending" site in it sometimes seems to return things to normal, but not always.
I use flashblock and noscript, but disabling either or both of these vital plugins seems to have no effect.
Just disabled both plugins again to test once more, loaded a vid on hulu, and stopped it; all seemed fine, but after hitting "back" to go back to my queue list there, the scroll stopped working.

focus owner was null
requestFocusInWindow();
after the move did the trick

Annoying - mouse wheel changes values in LOV when page scrolling

When I use the mouse wheel to scroll down the page after selecting a value from a Select List LOV, focus remains in the LOV and the LOV value changes automatically. Does anyone know of a workaround how to take focus off the LOV after selection? This has been annoying me for years especially in the Application Builder (which we can't do much about I suppose). Can this be done in my apps?...and please don't suggest not using the mouse wheel to scroll down the page...
regards
Paul P

Hi Paul,
assume you have a form with (at least) these two fields:
1. P70_EMPLOYEE_ID (standard Text field)
2. P70_MGR (select list)
All you need to do is specify
onchange="$x('P70_EMPLOYEE_ID').focus();"at HTML Form Element Attributes of item P70_MGR. Then everytime a value is selected from the select-list the focus/mouse pointer changes to P70_EMPLOYEE_ID
brgds,
Peter
Blog: http://www.oracle-and-apex.com

Scrolling table mouse wheel

My UI contains a table that is initially empty. When the app is launched I can mouse-over the table and use the mouse wheel to scroll through the (empty) table, but after the table is filled with values this functionality stops. I can only scroll with the mouse wheel after left-click on the vertical scroll bar. Any way to scroll the table without having to click the scroll bar? Is there an attribute that can be set?

Hello !
Here is how I did it (be careful, you will have to force "FirstVisibleRow" variable to be inside of limits [1 ; number of raw in the table]...this is not done in the example) :
int CVICALLBACK tableCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
int FirstVisibleRow;
switch (event)
// If mouse over the table => table is forced to be the active control of UI
case EVENT_MOUSE_POINTER_MOVE:
SetActiveCtrl (panelHandle, PANEL_TABLE);
break;
// If mouse wheel scroll is used
case EVENT_MOUSE_WHEEL_SCROLL:
// Get first row index
GetCtrlAttribute (panelHandle, PANEL_TABLE, ATTR_FIRST_VISIBLE_ROW, &FirstVisibleRow);
// Set new first row index : scroll-down if eventData1 = 2 (scroll-up otherwise, if eventData1 = 3)
SetCtrlAttribute (panelHandle, PANEL_TABLE, ATTR_FIRST_VISIBLE_ROW, (eventData1 == 2) ? FirstVisibleRow - 5 : FirstVisibleRow + 5);
break;
return 0;

Mouse wheel to scroll

Similar Messages

Maybe you are looking for