MouseLeave and mouseUp outside stage don't fire if wmode=opaque

http://fraticelli.info/temp/mouseFuncTest.html
Click and release on the stage. 'mouseDown' and 'mouseUp'
appear.
Mouse out of the stage. 'mouseLeave' appears.
Click and hold on the stage, then drag your cursor outside
the stage, then let go of the mouse button.
Neither 'mouseUp' or 'mouseLeave' fire.
Strangely this only happens if wmode=opaque!
Is Adobe aware of the problem? Are there any ways to work
around this?

This is actually good stuff and well written but I hesitate to advise people to use either the "oven trick" or really even the heat gun method as both are notriously short-lived even if they appear effective. Your far better bet is to send the board in to one of the vendors on the internet who are set up to do a proper reball. Even those fixes are good for maybe 12-18 mos. But again, you get a high grade for spelling it out.

Similar Messages

Actionscript 3 / Firefox / Mouse release outside stage

So I need to be able to detect when the user releases the
mouse button outside the stage/movie bounds. I am using
Actionscript 3 / Flash 9.
Since onReleaseOutside was nixed, and setCapture is no longer
there now that Flash 9 is final, I'm using an event listener for
mouse_up on the stage. This works sometimes... but specifically not
when running inside Firefox 2.0 on a Mac..or when wmode is set to
something non standard (opaque or transparent running on
Windows/Firefox).
This is quite critical actually, pretty easy to repro,
assuming you have Firefox and MAC. Just drag a slider component
onto your stage inside a test app. Publish, then run inside the
browser. If you drag the slider, mouse outside the movie bounds,
then release..then mouse back over movie, the slider continues to
animate - thinking you still have the mouse pressed.
I've also tried inspecting the buttonDown property of the
mouse move event..but once you've released outside the bounds of
the movie - it's always true.
More info at
http://www.justsuppose.com
I'm grasping for straws..anyone stumble across a
workaround???
Thanks,
Corey

UPDATE: Stumbled upon a workaround after much trial and
error. At least until they fix mouse_up.
So considering the mouseLeave event... This event is
dispatched usually as soon as your cursor leaves the bounds of the
player window. But... if you've moused down first, then dragged
outside window, the mouseLeave is not fired *until* Flash is done
tracking. In other words, until the user lets go of the mouse
button.
So now I listen for *both* mouse up and mouseLeave on the
stage object and I can reliably (cross browser), detect when the
user has released the mouse button in the case the cursor is
outside of the stage. In this scenario I only attach the mouseLeave
and mouseUp listeners on the stage after the user has first moused
down. I then remove them once I've detected the mouse up.
Still hoping for a fix, but at least this provides an
alternative (albeit sneaky) work around.

MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!

MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!

You may want to try this.
Solution A
Start up your MBP while pressing Option (alt)|, Command, P, R until your hear 3 chimes rather than 2 as indicated by apple. This worked for me the first time.
Solution B
Start your MBP while pressing Option (alt), Command, S
Hold until you see the computer automatic routine. When it finally stops type the following followed by "return":
fsck -fy
It will probably indicate some problem related to "pcscd.pub" (should be 16 instead of 17). I haven't figured out what this means but somewhere in the Internet i read it is related to scan cards...
More importantly this routine will fix any problems with your HDD similarily to disk repair. When it ends, it will tell you if it has fixed/modified anything. If it has, run the routine again by typing again "fsck -fy"
Lastly, reboot by typing "reboot" (followed by "return")
Solution C
Start up your MBP while pressing option (alt), command, S
hold keys until you see computer commands scrolling
when the routine stops type the following, each line followed by the "return" key:
mount -uw /
chmod 775 /
chmod 1775 /
reboot
After which your computer should reboot on it's own.
Each of the above has worked for me at one time or another. Once your computer has rebooted from the DVD you can reinstall OS X. If your problems started after installing 10.5.6, then I don't suggest updating until 10.5.5.
I'm very very disappointed with my 2007 MBP, it started to give me problems after 1 year. had to change the HDD and lately when I isntalled 10.5.6 it suddenly refused to start up., My previous Mac laptop (2003 866Mhz) worked for 4 years without a hitch. Ironically I've had to use it to access the internet and find solutions for my current MBP.
best of luck

How I rooted my Arc S and removed apps I don't need

WARNING: Here be dragons. I don't work for SE but was surprised that my Arc S came with some apps that you cannot remove without rooting your device. Seeing as internal memory space is already a bit limited I decided to root so I could run the wonderful Titanium Backup app and remove the stuff I had no interest in. I'm posting this in case others wish to do the same but I accept no liability if you remove something important and your phone crashes or won't boot. If you do screw it up then you should be able to use the PC Companion tool to restore the stock image.
FWIW I have an Xperia Arc S running the .42 firmware image.
Root your phone using the Xperia 2011 Easy Rooting Toolkit v3.0 (zergRush Exploit). Full details can be found here: http://forum.xda-developers.com/showthread.php?t=1320350 It's very easy and happens so quickly you'll wonder if it did anything at all.
After restarting your device you can check it's rooted by seeing if you now have Superuser and Terminal Emulator apps in your app drawer.
Next download Titanium Backup from the Market. There is a free version available.
Fire up Titanium Backup and tap the Backup/Restore button at the top of the screen. You will be greeted with a long list of apps. To remove an app simply tap it and choose Un-install but I urge you to use the Backup option first to back it up to your SD card!. Here is the list of apps that I removed from my phone:
Adobe Flash (I don't bother with web sites that require Flash)
Adobe Reader (reading PDFs on my device isn't something I do)
Anonymous Usage Stats (I don't need to send stuff to SE)
Chinese Keyboard (I'm not Chinese)
Crash Monitor (phone is fine without it)
Data Monitor (I use a separate O2 UK app for monitoring data)
devicemonitor (phone is fine without it)
Email (I use gmail exclusively)
FOTA Kill (sounds like something the CIA want on your phone *cough*)
Friends games & applications (I'd really rather not know)
Friends music & videos (ack, a friend of mine posts a 100 YouTube videos on FaceBook a day - drives me nuts)
FUN&downloads (if you say so!)
Home screen tips (a widget that gives you Android tips)
Lets Golf (no, let's not)
Magic Smoke Wallpapers (goodbye battery)
Music Visualization Wallpapers (goodbye battery)
OfficeSuite (I use Google Docs instead)
POBox Touch (something to do with the Japanese keyboard)
QC SEMC Service (some quality control app? Removing it hasn't done any harm)
R2R Client (Ready To Run - not sure what it is but phone is fine without it)
Retail Demo (I don't work in a phone shop)
Sakura (Chinese keyboard skin)
SecureClockService (this might be DRM related - which I avoid like the plague - and removing it has done me no harm)
Setup guide (I'm cool with not having this)
SIM Toolkit (I don't even have an icon for this anyway)
Sony Ericsson Sync (deprecated by Sony anyway)
Sony Ericsson Sync client wizard (ditto)
Street View (never use it)
Support (I use this forum!)
Talk (I hate Google Talk as it can drain your battery if you don't disable it)
TrackID (I use Shazam)
Update center (removing this will disable OTA updates but I use PC Companion for updates)
Wisepilot (I use Google Maps)
Woody (Chinese Keyboard skin)
Xperia Hot Shots (No thanks)
Your mileage may vary but I went from 320MB or storage to 420MB. Any my device feels snappier and I bet my battery life is better without running extra services.
There is a more comprehensive list to be found here: http://forum.xda-developers.com/showthread.php?t=1089470
Exercise caution and if you're not sure then you can use the Freeze option in Titanium Backup to stop the app from running without deleting it.
REMEMBER TO BACK THESE APPS UP BEFORE YOU USE THE UN-INSTALL OPTION!

Hello
I rooted my Sony Ericsson Arc S by following your excellent and easy to understand instuctions in order to remove some of the unwanted crap that came preloaded on the phone and in order to install the rooted version of Avast antivirus/antitheft app.
Everything has worked perfectly well for the last few months since doing this however now I am unable to update the phone via the sony ericsson update service.
Please advise
Cheers
Ian

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

Dynamically changing the height and width of Stage

Hi,
          I would like to know how can I change the height and width of stage dynamically. I tried it with the following code:
                         Stage.height = 250;
                         Stage.width = 250;
during the run time. Initially the Stage is at a height and width of 370 and 450 respectively. Also when I tried to trace the height and width of Stage after resizing the stage width and height, its showing the old value of width and height. That means the width and height not chnaging. Anybody have any idea about this.

Hi Ross,
            I could understand something about the problem after making a research on this topic. We can't change the width and height of stage from actionscript itself, right? I will explain the way I am planning to do. I don't know whether its right or not. Anyway you just go through it. First the player need to be resized, according to the specified height and width. Then in the object tag, there are two fields named height and width. We should change these value according to the specified height and width of video controller, dynamically. Am I right? But I am confused with two properties of Stage such as: align and scaleMode. The code was actually developed my trainer. There, the scaleMode is set to "noScale" and no align property is used. My doubt is how should I set align and scaleMode properties of Stage. Hope you understood what I meant.
Regards,
      Sreelash.S.

Asked to put security questions and answers. Click "Done" and it does not lead me anywhere. Now cannot download anything from iTunes Store.

Asked to put security questions and answers. Click "Done" and it does not lead me anywhere. Now cannot download anything from iTunes Store.
Anyone has been having this problem?

I have the same issue, bteween France and The Netherlands. No solution found yet.
Worse even. My credit card is not from The Netherlands, and the dutch store does not accept a creditcard from outside NL. So i used my french card to buy one app using France has my home country. Luckily the app's language remained English, but now the french store seems to be offering me frech versions of existing (free) apps which i dont want. So i cant use the updates.
i cant change the country back to Neterlands, without using a credit card. I can make a new ID, but the old one remains stuck with the french store, pffff It seems the only solution is to create a new ID via a "purchase" of a free app, but the older free apps all may need to be reinstalled that way.
Typical Apple ..... ? ! !
I may regret having purchased this ipad.....

I'm downloading adobe software via my dad's account and when it's done loading, it has a message where it says it sent a verification email to my email address, but when I check it shows that it hasn't been set. I keep clicking the resend email and it cl

I'm downloading adobe software via my dad's account and when it's done loading, it has a message where it says it sent a verification email to my email address, but when I check it shows that it hasn't been set. I keep clicking the resend email and it claims it does but it still hasn't sent the email to my address. How do I fix this?

It is probabl,y sending the email to your Dad's email address if you are using his account.

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

http://techobar.blogspot.com/2012/11/unlocking-lock-pattern-after-too-many.html
Or this site.
http://about-google-android.blogspot.com/2013/04/how-to-unlock-android-phone-when-forgot.html

Abap report103 movement type is done and 105 is NOT done.

HI,
Requirement need materials for which 103 movement type is done and 105 is NOT done.
Scenario: - Material comes in company means we do movement 103 for that. after that we do movt. type 105 for that material. I want those material document list that had 103 but not 105.
Means material has enters in company but movt. type 105 not done.
Please advice am abap fresher
Regards..
R.Sudhakar

Is possible Query in sap to get this only 105 not release report ?
ANS:
Quary table MSEG,
Check the table content with BWART = 105
Get the EBELN Nos.
Pass the EBELN into EKKO Table, Get the value of Field FRGKE.
if FRGKE <> 'G'.
ie. Document not yet released.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

I edited photos in photo shop that I took off of my camera and then whenI was done I saved them in a folder in my documents as a JPEG. Now when I try to open them there is an encrytion error me assage.

I edited photos in photo shop thay I took off my camera and when I was done I saved them in a folder in my documents as a jpeg. now when I try to open them there is an encryption error message

The folks here would need far more information from you before they provide help.
You know the drill: Exact OS...PS version...etc. The more you provide, the better.
What is the exact message that is displayed?
What have you tried so far?
Do the files display on your browser? In Bridge?
What are you doing when it happens?
Are the files still on your cameras card? If so and,you copy one to your desktop and save it without changes, does it reload properly?
Don't worry about providing too much information. Every little bit helps.

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.

Hi. I tried to change my old icloud account on a new one. After reset the settings I need to enter my old Apple ID account and password, that I don't remember.
I do not remember it because when I bought the my iPhone 4s in 2011 I didn't understand how it works and asked a representative to set it up for me. The representative helped me and gave a piece of paper with login and password but I lost it a long time ago.
Before resetting the settings I turned off "Find my iPhone" function, but it anyway asks me to enter my old Apple ID and password. I have the original box, documents, receipt. So how can I solve this problem?

You do not have to call US, but you need to call. Or else.
Contact Apple for support and service - Apple Support

MouseLeave and mouseUp outside stage don't fire if wmode=opaque

Similar Messages

Maybe you are looking for