Mouseover to change scene and start at certain frame
Hi. Is it possible, in CS3, and preferably Actionscript 2.0, to make a mouse over a button action that would go to a specific scene and frame, depending on the button? I have 5 buttons, and ould like, on rollover only...no click/down, to have the playhead go to a different scene and start playing from a specific frame #. Or do I have to do the click/down action?
Thanks for any help.
Alexis
Close... use...
on(rollOver){
gotoAndPlay("sceneName", 24);
If you look up the "on" handler in the AS2 help documentation, you'll see the various events that can be used as arguments with it.
Similar Messages
-
ICal events changing duration and start time after .Mac sync
I sync two OS X Tiger computers (10.4.2) using .Mac to keep my iCal calendars in order. Certain events following a certain date are mutating with longer durations and different start times after syncing between the two computers.
Anyone experiencing the same problem?
Any ideas?Two different problems here:
Try one at a time:
Quit iCal. Delete iCal preferences in your User Library: ~/Library/Preferences/com.apple.iCal.plist ( you'll have to reset iCal prefs after)
For those having problems with .Mac sync, reset the sync System Preferences/ .Mac/ Advanced tab.
Come back with results -
Macbook pro keeps changing volume and starting music from itunes on its own.
Have I got a virus, or is this some kind of poltergiest situation? SEND HELP.
This is not a virus. Sounds like there's an Apple remote being used in the vicinity of the computer, and it's picking up the signal. If you have an Apple TV, note that the Apple TV remote can also control your MacBook Pro in the manner you describe.
I had a similar situation myself... turned out to be my 2-year-old playing with my Apple remote. -
How to create and export a still frame from a movie in iMovie 09
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
*To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
*If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
*If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
Note: If you do not have a right mouse button, then control-click will work instead of right-click.
This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.First, click iMovie/About and see which version you have.
Versoon 9.0.2 would be iMovie 11.
Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option. -
After saving, certain frames disappear.
With CS5.5 on OSX, after saving a file and reopening it, certain frames (and their artwork) end up missing, i.e. aren't saved with the rest of the file. This happens with random frames. Other artwork, created after these frames, is still there. Anyone else run into this problem?
Hi Mark,
In the Flash Help menu, please click on Updates. The Flash CS5.5 updater fixes some issues similar to what you're describing. Once you're done updating the version number in the About Box should show 11.5.1.349.
Thanks,
Quynh
Flash Pro, QE -
I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect). I keep changing it, verifying but not all applications let me proceed. So I can't download itunes software updates or update my iphone even though I have just verified my info. I know others that have this problem but can't get support to resolve it.
Hi mpellichero,
Thanks for visiting Apple Support Communities.
The steps in this article can help if you are being asked for the password to your previous Apple ID:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Best Regards,
Jeremy -
How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....
Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well. -
To good citizens of the MAC world,
I am the founder of a non-profit organization, we are caring for 6,200 orphans and street kids in Vietnam. A donor had just donated her used iBook G4 for us to use in one of our several "learning centers" in Vietnam. Folks sometimes donating PC but this is the first time we ever received a MAC.. :-) I would like to know how to start this iBook all over new: change username and password. I am looking so forward to bring it to Saigon in a few days and let our children experience MAC ... I am a 2 years MAC users and I have no intention to return to the Dark side. Please help. I have the original OS disk. Thank you so much.There should be no need to zero the hard drive.
Using the Restore discs that came with the iBook when it was new, restore the system software using the appropriate instructions which you can find through a link contained in this Apple Knowledge Base article:
http://support.apple.com/kb/HT1561?viewlocale=en_US
Good luck with it. -
My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?
BigTex415,
my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it. -
I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.
This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest.. -
I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone
Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com -
CRM-ISU: Need to change the END date and Start Date for contract items
Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
ThanksHi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith -
The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?
If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad. -
When Safari opens all of my favourites come up as open tabs. I have tried changing settings and deleting and reopening! I removed all favourites but still all open up at start? I have set a homepage and that doesn't come up upon starting safari either?
There are several options in your prefs. See these in order
EDIT: CellarDwellr just gave you a possible answer -
I was recently prompted to update iPhoto and make changes to the library. I did it but it keeps hanging up in step 5 or 6 and won't complete the cycle. I have used force quit, rebooted and started again several times. How do i get this to work?
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
If that fails:
Restore from your back up, repair the Library and try again.
Maybe you are looking for
-
Where are the Bootcamp drivers on the Leopard install disc?
I have an older generation MacBook Pro (about April 2007), and it was running fine with Leopard/Bootcamp 2.0 and Win XP Pro until recently. In the process of trying to fix it, I installed the Bootcamp 2.1 upgrade, which killed my bluetooth capability
-
Help needed in calling a javascript function from a jsp
Hey guys, I need help. In my jsp I have a field called date. When i get date field from the database, it is a concatination of date and time field, so I wrote a small javascript function to strip just the date part from this date and time value. The
-
Notes field in Add Bk not syncing on mobileme
I sync my Add Bk using mobileme. While on a trip, I put together a smart group from my entire address book (on my MacBook). The smart group is based on a note that I added to the Notes field on particular cards. This is not syncing over to my desktop
-
Hello, I would like to popup a dialog box when the user clicks Save so that they may navigate to a location on their hard drive to save the file. Then, they click OK or something similar and the file is saved to the location they choose. Can anyone p
-
Hi Does anyone have a simple pressure transducer vi with offset null built into code. I am fairly new to labview and most examples I have seen are way to complex for me to figure out what is going on. Is it better to use DAQmx or DAQ assistant?