Moving existing and storing new Essbase apps on a different disk drive

Hello,
I need to move my existing Essbase apps to a new local disk drive and was wondering how exactly to go about that? I've searched the forums and found some brief references to exporting the data, updating/changing the settings, and then re-imporiting the data, but I don't know what exactly that means. I'm fairly new to administering Essbase in general, so I was hoping for some pointers towards Oracle documentation that covered those steps in more detail.
I'd also like to update the "default" storage location for the apps so that when the users create new apps they go to this new drive as well.
Thanks in advance for any direction you can provide,
-Ben

I think the database metadata cannot be moved, just the .IND and .PAG file. Btw, John Booth showed me the first part of that Stupid Trick -- I was the one who stumbled into the four step approach. I only spent 18 years doing it the hard way.
:) or maybe :(
Regards,
Cameron Lackpour

Similar Messages

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS6 package, put in my serial number, but during install it is still requiring a disk. What do I do?

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS6 package, put in my serial number, but during install it is still requiring a disk. What do I do?

Thread moved from the Adobe Captivate forums.

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS package, put in my serial number,but during install is is still requiring a disk. What do I do?

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS package, put in my serial number,but during install is is still requiring a disk. What do I do?

is your cs6 a upgrade?
if so, after entering your cs6 serial number you will be prompted to select the qualifying product from a dropdown. select the product you own and enter its serial number.
after entering each serial number at the correct time installation will proceed.
if no, what files (names and extensions) did you download and what are the file sizes shown on your hd?

Problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2

Hi experts,
I'm getting problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2.
I have a scenario where is defined the document type ZC1, document part 200, authorization group 0002 and for all of these documents the storage category "Cofre DMS1". And the status which demands the storage category is 'FR'.
I've been fullfiling the BAPI_DOCUMENT_CREATE2 in this way:
"Tables
data: it_doc like bapi_doc_draw2,
      it_return like bapiret2,
      it_files like bapi_doc_files2 occurs 0 with header line,
      it_objs like bapi_doc_drad occurs 0 with header line.
"Variables
data: wl_doctype like bapi_doc_draw2-documenttype,
      wl_docnumber like bapi_doc_draw2-documentnumber,
      wl_docpart like bapi_doc_draw2-documentpart,
      wl_docversion like bapi_doc_draw2-documentversion.
it_doc-documenttype = 'ZC1'.
it_doc-documentpart = '200'.
it_doc-documentversion = '00'.
it_doc-description = 'Test of documents creation via BAPI'.
it_doc-username = sy-uname.
it_doc-statusextern = 'FR'.
it_doc-authoritygroup = '0002'.
refresh it_files[].
clear it_files.
it_files-originaltype = '1'.
it_files-storagecategory = 'Cofre DMS1'.
it_files-wsapplication = 'PDF'.
it_files-docfile = 'c:\110307.pdf'.
it_files-description = 'Test file'.
append it_files.
refresh it_objs[].
clear it_objs.
it_objs-objecttype = 'EKPO'.
it_objs-objectkey = '47000497600010'.
append it_objs.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
    documentdata = it_doc
IMPORTING
    documenttype = wl_doctype
    documentnumber = wl_docnumber
    documentpart = wl_docpart
    documentversion = wl_docversion
    return = it_return
TABLES
    objectlinks = it_objs
    documentfiles = it_files.
After execute the BAPI process I got the following error:
E26 087 - Data carrier COFRE DMS1 not defined
Does anybody have a sugestion to help me, please?
Thks
David
Edited by: David Tsutsui on Mar 18, 2010 10:52 AM

Please refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
Data Carriers for Storage the Originals of DMS

I just updated to IOS 10.10.3 and the new photos app. How do you hide photos so they don't show anywhere?

I just updated to IOS 10.10.3 and the new photos app. How do you hide photos and videos so they only show in the hidden album. Thanks

When publishing from Lightroom to Facebook, you are always sending them to an album. Lightroom doesn't generate you posts though. Generally Facebook is smart enough to create just one post for all of your images published to a single album. If you are getting individual posts per photo there isn't anything you can do from Lightroom's side to change that. Try refreshing you page your newsfeed or timeline to verify whether individual posts are being created or if it's just a timing issue.
Also, uploading images to Facebook will always result in your file having a different file name on the server and in the page code. No avoiding this, no matter your method of upload.

We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

There is no "adding" a device. Simply plug the iDevice into the computer. iTunes should automatically detect the device when it is connected.
iTunes can sync/manage as many iDevices as you want... there is no 1 device limit.

Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan

New OS install on a different hard drive

Hi
First of all, I have a Power Tower Pro 225 with the Newertech G3 processor card.
What I'm trying to do is that I just got the ATTO UL3D SCSI card with two 10K rpm 73GB 68-pin hard drives and I'd like to transfer everything that's in the slow running 2GB 50-pin hard drive to the newer ones. For some reason my Mac is prone to the "finder unexpectedly quit" error. I'm just hoping that it's an old hard drive related error.
In fact, I do have the OS9 CD. What do I need to do in order to reinstall the OS9 to a newer main hard drive without the Mac forcefully restarting from the newer one?
Can I switch back and force between the OS9 with the different hard drives?
Thanks

Hi, synergy2000 -
I did try the Option key but it didn't work.
Many older Macs. including pre-G3 ones (original equipment), can not invoke Startup Manager by holding down Option at the start of booting booting. Reason - since Startup Manager comes up before anything is loaded from a drive, it must be available in the coding of the ROM chip(s) on the logic board. Older machines weren't coded for it.
Is there any other way?
Yes. Use the Startup Disk control panel. Open that control panel, select the volume (and the OS if more than one is on a particular volume, such as both OS 9 and OSX) desired for the next boot, then restart. The machine should boot to that volume.
As noted by Grant, the choice made in Startup Disk will set the boot volume in PRAM, and that choice will remain set in PRAM until it is changed again in Startup Disk. It can also be reset to the internal hard drive on the original bus by resetting (zapping) the PRAM, which resets the PRAM settings to defaults.
Also, how do you duplicate the main hard drive to the second hard drive?
Cloning is not necessary with OS 9. Two ways to do suplicate it -
(1) Open the window for your main hard drive, do a Command-A ("Select All" in Edit menu), then drag the whole collecction over to the icon of the second drive. When that drive's icon highlights (darkens), let go. Finder will copy it all there.
(2) Drag the icon of your main hard drive to the icon of the external drive; when that drive's icon highlights, let go. Finder will copy it there, placing everything into a new folder named the same as the main hard drive. In this case "everything" includes anything left lying around on the Desktop and anything left in the Trash; those items will be placed into new, appropriately named folders inside the folder named the same as the main hard drive.
Once the copying has completed, move the System Folder, Applications (Mac OS 9) folder, Documents folder, and Utilities folder (if it is not in the Applications folder) out of the enclosing folder so they are all at the root level of the drive (visible in the window that opens when you open the drive's icon).
<hr>
In either case, be sure the System Folder is blessed - that it displays the Mac OS glyph superimposed on top of a normal folder icon. Then check in Startup Disk control panel - if the volume you just copied the stuff to is shown, select it and restart, to test/confirm that it is bootable and healthy.
In either case you will probably need to 'fix' one or more aliases. An alias in not much more than an icon and a pathname to the original it represents. When an alias is copied to anywhere, the pathname in it is not corrected. This means that any aliases that had been part of your previous config will still be pointing to the original drive. Fortunately, when you do a Get Info on an alias, there is a button in its Get Info window that allows you to fix its pathname ("Select New Original"). Aliases that may need to be fixed include - one for Sherlock, in the Apple Menu Items folder in System Folder (unless you replaced the one put there by the OS's installer with the app itself); one or more that may be in the Application Support folder in System Folder; and any that you created yourself for your use.

I purchased standard XI but need the download - new laptop doesn't have a disk drive. Can someone please send me a link to download so I can activate with my serial #?

I purchased standard XI but need the download - new laptop doesn't have a disk drive. Can someone please send me a link to download so I can activate with my serial #?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

How do you install logic on the new imac if there is no disk drive?

How do you install logic on the new imac if there is no disk drive?

Dj Generator wrote:
[There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Moving existing and future catalog files (.psa) to another HD partition? (WIN-XP-Elmnts5.0)

Does anyone know how I can tell Elements 5.0 to move all files it is creating and using, from my C: partition to my D: partition? I don't want Elements using the C: drive partition for anything (especially catalogs, thumbnails, etc...).
I have already (I think?) set the default new-catalog location to the D: drive, but I want to move the existing (and huge!) "My Catalog.psa" and everything related to it, to the D: drive where the new default catalog location is.
Is there a way to do this easily? I just completed a full (initial) backup, and moved 75% of my photos offline, so all I need to do is move the catalog files associated with them. (For reference, the photos themselves are stored on the E: partition, or DVD, not on the C: or D: drives).
THANKS!
Eric

first I would suggest a
File > Catalog > Recover
on that huge My Catalog.psa because it will cleanup and compact that catalog file.
Based on a forum tip from another participant, I used SAVE AS under the File > Catalog dialog to achieve placing a catalog and its associated Catalog Folders folder (which contains thumbnail cache and offline proxies) to a different hard drive.
During this Save AS process, I gave my Catalog a different name because I thought that it was a safer approach. The Title bar of the Organizer workspace shows the Catalog name - so I like definitively knowing what catalog I am referencing based on the catalog name.
I do recommend using a different name for the catalog when using this process.
FYI - I think that you will need to do a new Full PSE Backup after you have this newly named Catalog functioning OK on the new drive - because a PSE Backup is Catalog specific.
FYI- If you ever use the PSE File > Catalog > Open dialog, it will not not initially show this new catalog on the other drive. You must navigate yourself to the drive/folder containing your catalog and then it will work. It appears to initially only list catalogs in the default location: no big deal but disconcerting if you expect it to be present in the list and it is not.
You will still have Preferences under the user's Doc and Settings and of course, the Program Files folder structure.

Can't open existing library with new photos app on iMac 10.10.3

I have upgraded my iMac to yosemite 10.10.3, with the new Photos app. I have been using iPhoto Library Manager to create and manage my libraries, which I store on an external hard drive.
Now, with the upgrade and new Photos app, some libraries open and I can access my photos without a problem, but other libraries don't seem to open. Instead, I get the new Photos windows with the demo slideshow, etc. I'm worried that the photos within the libraries I'm unable to open are now gone.
Has anyone else experienced this? Any advice?

How is the EHD formatted?
If the external hard drive is not formatted OS X Extended (journaled) Photos will not be able to open them. Actually iPhoto requires the volume to be formatted that way also but doesn't check the format before opening. Many users have been able to operated on EHDs that were not formatted properly for a while but eventually ended up with a damage/corrupted library.

What are some apps that will work on an iPhone5 and the new health app

I want to use the new health app but I am unable to find other apps that will work on the iPhone 5. What are some good apps?

A blood pressure app could share data with a physician app and more.
http://www.foxnews.com/tech/2014/09/16/expert-apples-health-push-poses-big-priva cy-challenges/

Serial number, bought with CS4 is no longer visible on my adobe account, I have just upgraded my computer and downloaded the product as I have no disk drive

Bought a student edition, so the serial number was sent through after confirmation process. I just upgraded my laptop and want to install the product. My new computer has no disk drive so I have downloaded CS4. My previous laptop was damaged a while ago and so I have not been using my Adobe account for some time. I now want to find my serial number to activate CS4 and I can't see it anywhere or find an easy way of contacting Adobe. Help.

If your serial number does not show on your account page, I don't know how anyone can help
https://www.adobe.com/account.html for serial numbers on your Adobe page

How to make the RESCUE AND RECOVERY hidden partition when changing the hard disk drive

I've got T61 and I'd like to know if is it possible (in case of changing the HDD) to make the RESCUE AND RECOVERY hidden partition on the new hard disk drive? If yes - please let me know how to do that.

hi you the rescue partition is made automatically when you use your recovery cd's on the new HDD so no problem there!
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Moving existing and storing new Essbase apps on a different disk drive

Similar Messages

Maybe you are looking for