Moving of file on application server

Hi,
   i am trying to move a file from one directory to other on the application server. i am using the following code.
open dataset f_fdir for input in text mode encoding default.
do .
    read dataset f_fdir into itab.
    if sy-subrc ne 0.
      exit.
    endif.
append itab.
enddo.
close dataset f_fdir.
open dataset f_fdir1 for output in text mode encoding default.
loop at itab.
    transfer itab to f_fdir1.
endloop.
close dataset f_fdir1.
delete dataset f_fdir.
but the file i am trying to move is prety big and is causing memory problems. is there any code where i can read a row at a time or a block at a time and copy it rather then the entire file at a single time. i am very new to ABAP so you help will be very much appreciated.
Thank you,
Ravi.

Hi Ravi ,
1.
In TEXTMODE =>If you read from or write to a file that is open in text mode, the data is transferred line(row) by line(row). The system assumes that the file has a line structure.
2.
Do not worry.
You are doing right way.
Thanks,
Venkat.O

Similar Messages

Moving files in application server

Hello Everyone,
Is it possible to move all files from one directory to another directory in application server?
My requirement is like this:
I want to move all files present in one directory (Let's say A) to another directory (Let's say B) in application server.
I pick one by one each file from directory A, process it by ABAP program and then wants to move the same file into directory B.
When all the files moved to directory B, directory A should be empty with no files.
Kindly let me know if anyone comes across this scenario.
Waiting reply in anticipation.
Regards,
Tarun

hi,
Get all the files from application server directory using function module EPS_GET_DIRECTORY_LISTING.
To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
To Delete 'EPS_DELETE_FILE'.
Regards
Sudheer

File from application server -Read and process and delete the file .

Hi All,
         I writing a ZEE program which will read the file from application server(file will be in text delimat format) and moving the data to internal table and uploadind data base.The part which iam facing problem is -
> I hve read the file from application server like below ,
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
Spliting part i having problem .i need to seperate each field which is seperate from tab delimite and pass it into respective fields of internal table .
Second if another file come to the appicaltion server , wether my first file will be there ? or should i need to delete the first file after redaing how should i proceed further ?.
Regards
SRIRAM...
THANKS In ADVANCE

HI,
1.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT cl_abap_char_utilities=>horizontal_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
APPEND wa_uploadtxt TO itab.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
2. If the another file get's generated in the application server with same file name then the data in old file get's over written with the new data. You are not required to delete the file.

Read Tab delimited File from Application server

Hi Experts,
I am facing problem while reading file from Application server.
File in Application server is stored as follows, The below file is a tab delimited file.
##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1###S#O#R#T#2###N#A#M#E#_#C#O###S#T#R#_#S#U#P#P#L#1###S#T#R#_#S#U#P#P#L#2###S#T#R#E#E#T###H#O#U#S#E#_#N#U#M#1
i have downloaded this file from Application server using Transaction CG3Y. the Downloaded file is a tab delimited file and i could not see "#' in the file,
The code is as Below.
c_split TYPE abap_char1 VALUE cl_abap_char_utilities=>horizontal_tab.
here i am using IGNORING CONVERSION ERRORS in order to avoid Conversion Error Short Dump.
OPEN DATASET wa_filename-file FOR INPUT IN TEXT MODE ENCODING DEFAULT IGNORING CONVERSION ERRORS.
      IF sy-subrc = 0.
        WRITE : /,'...Processing file - ', wa_filename-file.
       DO.
      Read the contents of file
          READ DATASET wa_filename-file INTO wa_file-data.
          IF sy-subrc = 0.
            SPLIT wa_file-data AT c_split INTO wa_adrc_2-kunnr
                                               wa_adrc_2-title
                                               wa_adrc_2-name1
                                               wa_adrc_2-name2
                                               wa_adrc_2-name3
                                               wa_adrc_2-name4
                                               wa_adrc_2-name_co
                                               wa_adrc_2-city1
                                               wa_adrc_2-city2
                                               wa_adrc_2-regiogroup
                                               wa_adrc_2-post_code1
                                               wa_adrc_2-post_code2
                                               wa_adrc_2-po_box
                                               wa_adrc_2-po_box_loc
                                               wa_adrc_2-transpzone
                                               wa_adrc_2-street
                                               wa_adrc_2-house_num1
                                               wa_adrc_2-house_num2
                                               wa_adrc_2-str_suppl1
                                               wa_adrc_2-str_suppl2
                                               wa_adrc_2-country
                                               wa_adrc_2-langu
                                               wa_adrc_2-region
                                               wa_adrc_2-sort1
                                               wa_adrc_2-sort2
                                               wa_adrc_2-deflt_comm
                                               wa_adrc_2-tel_number
                                               wa_adrc_2-tel_extens
                                               wa_adrc_2-fax_number
                                               wa_adrc_2-fax_extens
                                               wa_adrc_2-taxjurcode.
WA_FILE-DATA is having below values
##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1###S#O#R#T#2###N#A#M#E#_#C#O###S#T#R#_#S#U#P#P#L#1###S#T#R#_#S#U#P#P#L#2###S#T#R#E#E#T###H#O#U#S#E#_#N#U#M#1
And this is split by tab delimited and moved to other variables as shown above.
Please guide me how to read the contents without "#' from the file.
I have tried all possible ways and unable to get solution.
Thanks,
Shrikanth

Hi ,
In ECC 6 if all the unicode patches are applied then UTF 16 will defintly work..
More over i would suggest you to ist replace # with some other * or , and then try to see in debugging if any further # appears..
and no # appears then try to split now.
if even now the # appears after replace statement then try to find out what exactly is it... wheather it is a horizantal tab etc....
and then again try to replace it and then split..
Please follow the process untill all the # are replaced...
This should work for you..
Let me know if you further face any issue...
Regards
Satish Boguda

Problem in uploading file from Application Server

Hi everyone,
i got a problem in uplaoding a file from application server.i am having two folder (one folder name is current and another one is processed)in application server. In current folder i am having N no of files.I want to upload all the files names into one internal table and i want to process one by one file.After processing each file the file should be moved to processed folder and the files should not exist in current folder.All these process must be done everyday.Please rectify my problem asap.

Ramesh,
Take authorization from basis guy.
Use the below code to get the list of files from require directory
*& Report ZDIRFILES *
REPORT ZDIRFILES .
PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
 include structure salfldir.
data: end of it_filedir.
*START-OF-SELECTION
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
 exporting
 name = p_fdir
 tables
 file_tbl = it_filedir.
Now in internal table "it_filedir" will have all your files.
For moving and deleting
report zrich_0001.
Parameters: d1 type localfile default '/usr/sap/TST/SYS/fld1/Data1.txt',
 d2 type localfile default '/usr/sap/TST/SYS/fld2/Data1.txt'.
data: begin of itab occurs 0,
 rec(20) type c,
 end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
 do.
 read dataset d1 into wa.
 if sy-subrc <> 0.
 exit.
 endif.
 itab-rec = wa.
 append itab.
 enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
 transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Check below FM if required
To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
To Delete 'EPS_DELETE_FILE'.
Don't forgot to reward if useful

Downloading File on Application server

Hi All,
I have wriitten a code for Downloading a data on application server.
I wanted to add Summary details for the same extract .
I have collected all the summary details in the internal table of type string .
I am using TRASPORTING for moving Summary deatils to File on application server and then again transporting Extarct .
But in the summary details ,I am getting last line of that not complete summary.
I used this table (string type) for Presentation server and its working fine there.
Please help me out.
ans will b rewarded.
Thanks
Hemant

Hi,
Make sure you have the TRANSFER statement with in the internal table loop..
LOOP AT ITAB.
TRANSFER ITAB TO '/tmp/test.txt'.
ENDLOOP.
Thanks,
Naren

Process Chain - Delete File from Application Server

Hi Gurus,
Im working with Process chain, and i have a load from a flat file, so my question is :
How can i delete that file from the application server after was loaded ?
THANKS IN ADVANCED !!! I REALLY APRECCIATE YOUR HELP.
Marcos

hi,
I have gone through the forum you have posted for deleting files from application server through process chain.
I have similar reuirement in my project.
Can you please provide me the solution?
Your inputs will be highly appreciated.
Thanks in advance.
Regards,
Lavanya.

How to delete file from application server(Unix)

Hi All,
Using the below code downloading a file from application server(Unix) to client machine. I want to delete the file from application server once it is downloaded to client
We work on Forms 11.1.1.4.0 and Oracle DB 10g. Client machine are Windows 7.
BEGIN
IF webutil_file_transfer.AS_to_Client
(clientFile => Name_In('global.g_file_name')
,serverFile => ls_AppServer_Loc)THEN
message('Data exported Successfully');
ELSE
message('File download from Application Server failed');
END IF;
EXCEPTION
WHEN OTHERS THEN
message('File download failed: '||SUBSTR(sqlerrm,1,200));
END;
I have search for solution on OTN. Few suggested to use HOST.
Can any one help me how to use Host() built_in to delete the file.
Thanks,
Maddy

Can any one help me how to use Host() built_in to delete the file.
Host('/bin/rm <complete file path>');

Delete file from application server

Hi,
Can any one tell me how to delete a file from application server?
Thanks,
Rahul.

Basic question, please search for available information.
Thread locked.
Thomas

How to upload a file in application server to an internal table

Hi,
 I am asked to upload a file from application server to internal table. Can you please suggest me the ways to do it or the function module which helps to browse the application server file names.
I have done a program. But its giving problem in searching the files from application server. I am pasting my code for ur review. Please tell me which part i have to correct or suggest me some other ways to do it.
*& Report ZUPLOAD1
REPORT ZUPLOAD1.
type-pools: truxs.
parameters: p_upl_ps radiobutton group g1 default 'X', "upload from pres. server
 p_path type rlgrap-filename,
 p_upl_as radiobutton group g1, "upload from appln server
 p_dir LIKE filepath-pathintern DEFAULT 'Y_ABAP',
 p_file LIKE filepath-pathintern lower case,
 p_test as checkbox.
constants: c_x value 'X',
 c_tab type c value cl_abap_char_utilities=>horizontal_tab.
types: ty_data(1000) type c. "structure to hold legacy data
data: i_data type standard table of ty_data. "internal table of ty_data
types: begin of stritab,
 land1 type v_t604-land1, "structure of legacy file.
 stawn type v_t604-stawn,
 bemeh type v_t604-bemeh,
 impma type v_t604-impma,
 minol type v_t604-minol,
 end of stritab.
data: gi_itab type standard table of stritab, "internal table of legacy file
 gw_itab type stritab. "work area
data: i_raw type truxs_t_text_data,
 v_fullpath type string.
at selection-screen on value-request for p_path.
if p_upl_ps = c_x. "if presentation server is selected
perform get_file.
else. "if application server is selected
perform set_file_path.
perform upload_from_server.
perform split_data.
endif.
form get_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
 FILE_NAME = p_path. "getting the file name of pres server
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
 I_LINE_HEADER = 'X' "converting excel to sap and filling in
 I_TAB_RAW_DATA = i_raw "internal table
 I_FILENAME = p_path
TABLES
 I_TAB_CONVERTED_DATA = gi_itab
EXCEPTIONS
 CONVERSION_FAILED = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
form set_file_path. "Getting the file path of application server
data: lv_file type p_file.
 lv_file = p_file.
 CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
 EXPORTING
 CLIENT = SY-MANDT
 LOGICAL_PATH = p_dir
 OPERATING_SYSTEM = SY-OPSYS
 PARAMETER_1 = ' '
 PARAMETER_2 = ' '
 PARAMETER_3 = ' '
 USE_BUFFER = ' '
 FILE_NAME = lv_file
 USE_PRESENTATION_SERVER = ' '
 ELEMINATE_BLANKS = 'X'
 IMPORTING
 FILE_NAME_WITH_PATH = v_fullpath
 EXCEPTIONS
 PATH_NOT_FOUND = 1
 MISSING_PARAMETER = 2
 OPERATING_SYSTEM_NOT_FOUND = 3
 FILE_SYSTEM_NOT_FOUND = 4
 OTHERS = 5
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
endform.
form upload_from_server.
data: lv_msg type string,
 lw_data type ty_data.
open dataset v_fullpath for input message lv_msg in text mode encoding default.
if sy-subrc <> 0.
message lv_msg type 'i'.
stop.
endif.
do.
read dataset v_fullpath into lw_data.
if sy-subrc <> 0.
write:/5 'Error in processign data set'.
exit.
endif.
append lw_data to i_data.
enddo.
close dataset v_fullpath.
if sy-subrc <> 0.
write: /5 'Error closing dataset'.
endif.
endform.
form split_data.
data: lw_data type ty_data.
data: lw_itab type stritab.
data: begin of ty_itab,
 land1 type v_t604-land1,
 stawn type v_t604-stawn,
 bemeh type v_t604-bemeh,
 impma type v_t604-impma,
 minol type v_t604-minol,
 end of ty_itab.
loop at i_data into lw_data.
split lw_data at c_tab into
 ty_itab-land1
 ty_itab-stawn
 ty_itab-bemeh
 ty_itab-impma
 ty_itab-minol.
lw_itab-land1 = ty_itab-land1.
lw_itab-stawn = ty_itab-stawn.
lw_itab-bemeh = ty_itab-bemeh.
lw_itab-impma = ty_itab-impma.
lw_itab-minol = ty_itab-minol.
append lw_itab to gi_itab.
endloop.
endform.
start-of-selection.
loop at gi_itab into gw_itab.
write: /5 'COUNTRY', 'IMPORT CODE', 'SUP UNIT', 'FIRST UOM', 'SECOND UOM',
 /5 gw_itab-land1, gw_itab-stawn,gw_itab-bemeh,gw_itab-impma,gw_itab-minol.
endloop.
end-of-selection.
I hope problem must be in p_dir and p_file which are in bold.. Kindly help me out. Thanks in advance.

see the following ex:
*& Form SUB_GET_FILEPATH
 text
--> p1 text
<-- p2 text
FORM SUB_GET_FILEPATH .
 GFILE = 'D:\SAP_INT\INBOUND\INBOX'. "Path
ENDFORM. " SUB_GET_FILEPATH
*& Form SUB_GET_FILE
 text
--> p1 text
<-- p2 text
FORM SUB_GET_FILE .
DATA: P_FDIR(200) TYPE C.
DATA: IT_FILEDIR1 TYPE STANDARD TABLE OF TY_FILEDIR WITH HEADER LINE.
P_FDIR = GFILE.
CALL FUNCTION 'RZL_READ_DIR_LOCAL'
 EXPORTING
 NAME = P_FDIR
 TABLES
 FILE_TBL = IT_FILEDIR.
REFRESH : IT_FILEDIR1.
LOOP AT IT_FILEDIR.
 IF IT_FILEDIR-NAME(4) = 'ZINC' OR IT_FILEDIR-NAME(4) = 'zinc'.
 MOVE IT_FILEDIR-NAME TO IT_FILEDIR1-NAME.
 APPEND IT_FILEDIR1.
 ENDIF.
ENDLOOP.
IF IT_FILEDIR1[] IS INITIAL.
 STOP.
ENDIF.
LOOP AT IT_FILEDIR1.
 REFRESH: I_TAB.
 CLEAR: I_TAB.
 NAME = IT_FILEDIR1-NAME.
 CONCATENATE: GFILE '\' NAME INTO G_FILE.
 OPEN DATASET G_FILE FOR INPUT IN TEXT MODE
 ENCODING DEFAULT
 IGNORING CONVERSION ERRORS.
 IF SY-SUBRC EQ 0.
 CONCATENATE 'FILENAME : ' G_FILE INTO I_MSG1.
 APPEND I_MSG1.
 DO.
 READ DATASET G_FILE INTO RECORD.
 IF SY-SUBRC = 0.
 SPLIT RECORD AT ',' INTO I_TAB-BUKRS I_TAB-EBELN
 I_TAB-BLDAT I_TAB-XBLNR I_TAB-LIFNR I_TAB-AMOUNT
 I_TAB-CURR I_TAB-BUSAREA
 I_TAB-BKTXT I_TAB-DMBTR I_TAB-MENGE I_TAB-SRNO.
 MOVE-CORRESPONDING I_TAB TO I_TAB1.
 ELSE.
 EXIT.
 ENDIF.
 APPEND I_TAB1.
 CLEAR: I_TAB, I_TAB1.
 ENDDO.
 ENDIF.
 CLOSE DATASET G_FILE.

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

File from Application server into BW

Hi All,
I have a urgent requirement and I do not know much of ABAP
The requirement is
selecting existing file from application server Dynamically in BW server. This will be done by writing an ABAP code at the InfoPackage level in the External Data Tab but I am in need some ABAP code for the same
Also let me know which table stores AL11 files
I know USER_DIR stores directories but I required the table for the files within the directories.
Any help is appreciated

Hi DPN,
If we have a condition like depending on System Date we have to get a file some thing like that then we can do that by using the ABAP Routine. But in your Scenario there are no specific conditions to select a file.
If we have some variable which stores the value which we give and gets the specified file... That Would be Great.
But in Routine we can not use Variables..(As Far As I Know)
So better Select manually every time...
Hope This Helps.
Regards,
rik.

File from application server-- Email ?

Hi,
I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
For that i had used the following code:
REPORT ZEMAIL_APP_SER_FAIL.
DATA :is_doc_chng        TYPE sodocchgi1,
      it_objtxt          TYPE STANDARD TABLE OF solisti1,
      is_objtxt          TYPE solisti1,
      it_objpack         TYPE STANDARD TABLE OF sopcklsti1,
      is_objpack         TYPE sopcklsti1,
      it_objbin          TYPE STANDARD TABLE OF solisti1,
      is_objbin          TYPE solisti1,
      it_reclist         TYPE STANDARD TABLE OF somlreci1,
      is_reclist         TYPE somlreci1,
      w_lines_tx         TYPE i.
** Create Message Body
**   Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
** main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
*   write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ     TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num   = 0.
is_objpack-body_start = 1.
is_objpack-body_num   = w_lines_tx.
is_objpack-doc_type   = 'CVS'.
is_objpack-OBJ_NAME   = 'GIND_EXP'.
is_objpack-Obj_langu = 'E'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'XXX'@'YYY'.COM'.
is_reclist-rec_type = 'A'.
Break-point.
*is_reclist-REC_ID   = 'XXX@YYY'.COM'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
   document_data              = is_doc_chng
   put_in_outbox              = 'X'
   commit_work                = 'X'
TABLES
   packing_list               = it_objpack
   contents_txt               = it_objtxt
   receivers                  = it_reclist
EXCEPTIONS
   too_many_receivers         = 1
   document_not_sent          = 2
   document_type_not_exist    = 3
   operation_no_authorization = 4
   parameter_error            = 5
   x_error                    = 6
   enqueue_error              = 7
   OTHERS                     = 8.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
when i execute this program:
I get the following error msg:
Activation setting not yet maintained
May i know what is the problem?

If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?

File from application server

Hi Guys,
I want to pick file from application server as an attachment and send as mail.
Thanks

*This program will allowed you to send email with attachment.
First, specify the attachment file from your local hardisk and execute.
Next, specify the sender email address and click the send button.
report z_mail.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
user = g_user
PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
EXCEPTIONS
USER_NOT_EXIST = 1
PARAMETER_ERROR = 2
X_ERROR = 3
OTHERS = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'sap-img.com testing by program'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
FOLMEM_DATA =
RECEIVE_DATA =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
*-- End of Program

Delete files from APPLICATION SERVER?

Hi All,
I am creating the files in application server with folder name as
/interface/freeway/ and filename as PO concatenating with sy-datum and sy-uzeit.
Ex file name now is /interface/freeway/PO20081201064120.csv
Now my req is i need to delete files which has beeen created less than 30 days.
regards,
Sachin.

hi,,,,,,
REPORT ZDELETE.
* Delete a file on the application server.
PARAMETERS: P_DIR LIKE RLGRAP-FILENAME
DEFAULT '/usr/sap/trans/',
P_FILE1 LIKE RLGRAP-FILENAME.
DATA: P_FILE(128).
DATA: W_ANS.
START-OF-SELECTION.
CONCATENATE P_DIR P_FILE1 INTO P_FILE.
* check file exists
OPEN DATASET P_FILE FOR INPUT.
IF SY-SUBRC NE 0.
MESSAGE E899(BD) WITH P_FILE 'does not exist'.
EXIT.
ELSE.
CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
EXPORTING
DEFAULTOPTION = 'N'
TEXTLINE1 = P_DIR
TEXTLINE2 = P_FILE1
TITEL = 'ARE YOU SURE YOU WANT TO DELETE'
* START_COLUMN = 25
* START_ROW = 6
IMPORTING
ANSWER = W_ANS
EXCEPTIONS
OTHERS = 1.
ENDIF.
CLOSE DATASET P_FILE.
CHECK W_ANS = 'J'.
* delete
DELETE DATASET P_FILE.
IF SY-SUBRC NE 0.
MESSAGE E899(BD) WITH 'Invalid file name' P_FILE.
ELSE.
CLOSE DATASET P_FILE.
MESSAGE I899(BD) WITH P_DIR P_FILE1 'DELETED'.
ENDIF.

Moving of file on application server

Similar Messages

Maybe you are looking for