Use HYPERLINK In ALV

Hi
i have requirement to add a hyperLink in ALV Report Output.
i have added the following code in my code but hyperlink('www.google.com' ) is not showing in the report output and when i execute the report then 'www.google.com' opens in the web browser.
write : 'www.google.com' hotspot on.
CALL FUNCTION 'CALL_BROWSER'
   EXPORTING
     url                          = 'www.google.com'
WINDOW_NAME                  = ' '
NEW_WINDOW                   = ' '
BROWSER_TYPE                 =
CONTEXTSTRING                =
   EXCEPTIONS
     frontend_not_supported       = 1
     frontend_error               = 2
     prog_not_found               = 3
     no_batch                     = 4
     unspecified_error            = 5
     OTHERS                       = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Atul

Check this
how to Including Hyperlinks in alv
and just use the code in my post.

Similar Messages

Hyperlink in ALV output and when downloaded to Excel, maintain that hyperli

Hi SAP Friends,
I want to know if this is possible. My requirement is, display a column with Invoice # and hyperlink (or you can call it as Hotspot in SAP language). When clicked on the hyperlink, it should open a webpage, giving details of Invoice. I tried testing BCALV_GRID_VERIFY program. I can see hyperlink in ALV output and when I click, it opens a webpage. However, when I down load data to Excel using Excel inplace, hyperlink is gone. Only data is down loaded. How can we make it happen that hyperlink is maintained even after downloading data from ALV ?
Any ideas ?
Niranjan

Waiting for any suggestions from users.
Niranjan

Use HyperLink(mailto:...) to open a file?

A question was posted previously about linking to an image file. The HYPERLINK function allows this if the image is on a web server and can be accessed via http:// but you can't use HYPERLINK to access a local file on your computer (or at least I can't seem to). The HYPERLINK function will also take a mailto: command and will open up your mail client with the address, subject, and message of your desire. I was wondering if it could also use the "attachment=..." part of the mailto command to attach a file to the email. Thus you could bring up a local image in your email client. I failed at getting it to work but I may have been formatting the command wrong. Anyone have experience with the proper formatting or anyone know if this is not a supported functionality?

As System Events returns an URL when we ask it for a file's properties, I tried to use this URL with no results but the files where on a single machine.
Maybe it behaves differently on a network.
To get the URL I uses this script:
set thefile to "Western 4:photos ???:PA030012.JPG"
tell application "System Events" to get URL of disk item thefile
the result is something like:
"file://localhost/Volumes/Western%204/photos%20%3F%3F%3F/PA030012.JPG"
%20 is the description of the space character
%3F is the description of the question mark character
Yvan KOENIG (from FRANCE vendredi 17 avril 2009 21:56:16)

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

Unable to edit XLSM files in SharePoint using hyperlink?

Hi All,
Unable to edit .xlsm files using hyperlink, please guide me.
Thanks
Ramanjulu Naidu N

Hi Ramanjulu,
Did this happen to all users?
Did the "Read Only/Edit" dialog pop up when you click the .xlsm Name link from SharePoint 2010?
Could you see the yellow message bar with "Edit Workbook" button when you open the .xlsm file in your Excel Application?
You can check if the following kb article could solve yellow message bar missing problem, set "Browser File Handling" as Permissive for your web application, or update the registry for client Office application.
Also check if the add-on "SharePoint OpenDocuments Class" is enabled in your IE 32-bit browser.
http://support.microsoft.com/kb/2661910
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do YOU organize pages, create a site map, and use hyperlinks?

I had to get out of bed to bring this up with you all; I couldn't stop thinking about this next learning curve. It is: How shall I organize the topics I have in my website? One extreme is to have all of the topics showing in all of the nav bars at the top of all the pages. The opposite extreme is ............ I cannot truly visualize it.
I think that the big obstacle for me is that i don't want to hide any pages so well, so slickly, that they can be found only by the most focused and persistent website visitor. I can see how some pages could be lost to a lot of casual website viewers.
On the other hand, there are some pages that are natural groups. In my case, the U.B.R.O.L. group is that. It is made up of five people and me. I have one page for a photo slideshow which has one photo of each of us, but then I have a separate page for Nigel and his photos, a separate page for Vali and her long bio and photos, and a separate page for Helen, her short bio and her many photos.
Tonight I tried making hierarchies using hyperlinks, so that U.B.R.O.L. shows up in the Site Menu, but Nigel, Vali, Helen, and Peggy do not show up. To get to their photos, one would have to click onto the U.B.R.O.L. group page. Once at the U.B.R.O.L. page, one can then click onto Vali's, Nigel's, and Helen's page, and then from each of their pages there are 3 hyperlinks: one to return to U.B.R.O.L., and three more hyperlinks to click onto the others who have personal pages. (Peggy does not have a personal page because she is shy and never gave me more photos or a bio of herself. She prefers anonymity.)
But even though I put those hyperlinks on those pages, I am having an internal concept war, my friends, and a solution is not at hand.
I am thinking of how I am going to deal with the pages made for me, my husband, and my husband and I together.
I cannot imagine clearly how a Site Menu would look at the topmost level and much less of an idea how each page would look several levels down.
I welcome any direction you could send my way. I would like to know how you organized your pages, how you decided which pages would not be listed in the nav bar, and what you did to/with the pages that were not listed in the nav bar.
Would you please send me the URL of your website so that I can SEE what you are talking about? I am not good at imagining what people say; I have to see it rather than imagine it.
Lorna in Southern California

Lorna, mostly from reading books, Iearned the following things.
•Don't make me think (actually the title of an excellent book on webdesign)
•Every information should be available in at most 3 clicks
•Tell them where they are, where they can go and where they have been.
IMHO, iWeb lends itself fairly well for these last 2 criteria. The Navbar is a very useful tool and I suggest you do not go too far away from it.
On my current issue of the toy theatre magazine (which is NOT a beautiful website) I wanted to go in 3 languages; English, German and Dutch. I knew i was courting disaster but one can be so ambitious. This in fact meant that I had to do 3 sites. Sites being defined as a group of pages structurally belonging to each other.
So I made an Index/Splash page with a nice picture, a title and 3 flags. These being links to the 3 versions. (I did not want to make them think on the Splashpage).
Clicking a flag brings the visitor to a Contents page on their version of the site. Just like the Contents page in a book. Here they can choose to go to any of the items and on each and every page of the site is a Contents button that returns them there.
Pages are numbered in the middle of the website, and to the leftside the number of (and link to) the previous page and to the right the same for the next page.
The current issue is number 25, ( http://www.vischmarktpapierentheater ), the previous 24 were done in Freeway and the design stems from there.
The translation to iWeb did work well but in the end the result was disappointing mostly because I wanted some slideshows, hated the "None .Mac accounts" version and went overboard with Keynote slideshows, really ugly.
The other problem stems from the triple language idea. This meant that I had to do either 3 versions of each slideshow, or make one version accessible for every language. This menat some convoluted linking which I will never do again.
In short If you want to go "deep", make various sites and link each starting page to you Index/Splash, keep the starting pages of each site on the Navbar Make a Contents sidebar or something like that on each of the starting pages, and than you can go anywhere within the required 3 clicks.
Good Luck
Harry

Use hyperlink to open another page , and pass some parameters to that page

Hi
Thank you for reading my post.
How i can use hyperlink to open another jsp file in a new window meanwhile pass some parameters to it.
for example i need something like this :
http://127.0.0.1:8080/myProj/faces/Viewmessage.jsp?messageID=10
i can not use session bean because i must open that in a new window and use hyperlink not Action
Thank you

I tried the following in the equivalent of your Viewmessage (page bean):
        ExternalContext eContext = FacesContext.getCurrentInstance().getExternalContext();
        String text = "Parameters: ";
        Iterator it = eContext.getRequestParameterNames();
        Map requestParams = eContext.getRequestParameterMap();
        while (it.hasNext()) {
            String key = (String)it.next();
            String value = (String)requestParams.get(key);
            text += "; " + key + " = " + value;
        staticText1.setText(text);That works as expected when you reach that new page via a hyper link.
The session object is also the same as in your `old' window. So be careful about synchronization!
I hope this helps.
-- Marco

Linking KN9 files together using hyperlinks, fades to black

When linking KN9 files together using hyperlinks, I press play the document being linked to fades in, then out to a black screen and after a couple of seconds returns to the files open files on my desktop.
I've checked all the setting and it even does it on 2 empty pages I tested with no transitions or document settings.
If I open both document before pressing play it's OK but because I have several large files being linked together I dont want to have to open all the files before presenting to clients etc.
Thanks!

The History
I reported the hyperlinking problem over a year ago when I updated Keynote from version 5.0.5 to version 5.1. According to the Apple tech that I wroked with at that time the Apple engineers had reproduced the issue and had put it on the fix list (Case 235638615). I then worked with Apple in December 2011 to test a version that supposedly fixed the problem, but did not, so Apple sent me a data logging monitor program which I ran and sent back. The Apple tech asked me to be patient as it might take awhile for the Apple engineers to fix the issue. When version 5.2 came out I reran my testing suite of presentations and found that the hyperlinking issue had still not been fixed. I have tried to contact Apple about my case since July 26th - my emails to the Apple tech with whom I worked back in December bounce back as undeliverable and he does not answer his phone (I have left messages with no replies) plus when I try to use Apple support to follow up on the case, all I get is a message to contact my Apple tech (Doh!). If Apple techs or Apple engineers watch the forums I hope they look into unresolved Case 235638615.
The Workaround
Hyperlinking worked fine with 5.0.5 - the .key files would load and display and did not have to be preloaded prior to runing the linked presentations. Version 5.1 through the current version 5.2 require all of the linked presentations to be preloaded prior to running them. Prior to the current version of Lion, I was able to manually run version 5.0.5 to successfully run my system of 32 presentations. The only downsides were that I could not use any transitions or animations introduced with version 5.1 and I had to force quit Keynote 5.0.5. However, when I tried that solution this month, it would not work. So I created an Automator app to load the appropriate subset of presentations for each day of the five day class and used version 5.2. Everything went okay with preloaded presentations.
I love using Keynote and do not want to go back to PowerPoint, so I hope Apple fixes this issue. I think we have been more than patient with the Apple engineers.

How to capture index/row no of row in table using object oriented alv.

i have a table with many fields. i have an alv grid table displayed using object oriented alv. when i double click on a record, i call another screen. there i want to display the record number. eg, if i doubleclick on the third row, i will go to next screen and display 3 there.
please let me know how it is done as it is urgent.
thanks in advance.

Hi,
Use the following code to get rowno.
CLASS lcl_grid_events DEFINITION DEFERRED.
DATA:
grid1_events      TYPE REF TO lcl_grid_events.
CLASS lcl_grid_events DEFINITION.
PUBLIC SECTION.
    METHODS:
      dbclk
       FOR EVENT double_click OF cl_gui_alv_grid
       IMPORTING e_row
                 e_column
                 es_row_no.
ENDCLASS.                    "lcl_grid_events DEFINITION
CLASS lcl_grid_events IMPLEMENTATION.
METHOD dbclk.
*access e_row variable, which contains the record no.
ENDMETHOD.                    "dbclk
ENDCLASS.                    "lcl_grid
write the following code after method call of set_table_for_first_display
    CREATE OBJECT grid1_events.
    SET HANDLER grid1_events->dbclk
                FOR grid1.
reward point if useful.

Replace REUSE_ALV function module with use of OO ALV(obect oriented)

HI,
I m using function module 'REUSE_ALV_GRID_DISPLAY' to disply the report but now client want to use object oriented ALV instead of REUSE_ALV function
pls help me.its very urgent
thanks!
Vipin
pls find the code below.
FORM f0001_get-select_data .
SELECT a~pernr
         a~endda
         a~begda
         a~bukrs
         a~werks
         a~persg
         a~persk
         a~btrtl
         a~abkrs
         a~kostl
         a~orgeh
         a~plans
         b~nachn
         b~vorna
         b~midnm
         INTO CORRESPONDING FIELDS OF TABLE i_pa0001_pa0002
         FROM pa0001 AS a INNER JOIN pa0002 AS b
         ON apernr = bpernr
         WHERE a~pernr IN s_pernr
         AND   a~werks IN s_werks
         AND   a~orgeh IN s_orgeh
         AND   a~plans IN s_plans.
SORT i_pa0001_pa0002 BY pernr .
IF NOT i_pa0001_pa0002[] IS INITIAL .
CLEAR: w_i_lines.
DESCRIBE TABLE i_pa0001_pa0002 LINES w_i_lines.
    IF w_i_lines GT 0.
    SELECT pernr
           kostl
           lstar
           werks
           lifnr
           ebeln
           ebelp
           lstnr
           FROM pa0315
           INTO CORRESPONDING FIELDS OF TABLE i_pa0315
           FOR ALL ENTRIES IN i_pa0001_pa0002
           WHERE pernr = i_pa0001_pa0002-pernr
           AND   kostl = i_pa0001_pa0002-kostl
           AND   ebeln IN s_ebeln.
     SORT i_pa0315 BY pernr kostl.
     ENDIF.
CLEAR: w_i_lines.
DESCRIBE TABLE i_pa0001_pa0002 LINES w_i_lines.
    IF w_i_lines GT 0.
    SELECT pernr
           endda
           begda
           schkz
           FROM pa0007
           INTO CORRESPONDING FIELDS OF TABLE i_pa0007
           FOR ALL ENTRIES IN i_pa0001_pa0002
           WHERE pernr = i_pa0001_pa0002-pernr
           AND   endda = i_pa0001_pa0002-endda
           AND   begda = i_pa0001_pa0002-begda.
     SORT i_pa0007 BY pernr.
ENDIF.
CLEAR: w_i_lines.
DESCRIBE TABLE i_pa0001_pa0002 LINES w_i_lines.
    IF w_i_lines GT 0.
    SELECT orgeh
           orgtx
           FROM t527x
           INTO CORRESPONDING FIELDS OF TABLE i_t527x
           FOR ALL ENTRIES IN i_pa0001_pa0002
           WHERE orgeh = i_pa0001_pa0002-orgeh.
   SORT i_t527x BY orgeh.
ENDIF.
CLEAR: w_i_lines.
DESCRIBE TABLE i_pa0001_pa0002 LINES w_i_lines.
    IF w_i_lines GT 0.
    SELECT plans
           plstx
           FROM t528t
           INTO CORRESPONDING FIELDS OF TABLE i_t528t
           FOR ALL ENTRIES IN i_pa0001_pa0002
           WHERE plans = i_pa0001_pa0002-plans.
      SORT i_t528t BY plans.
   ENDIF.
ENDIF.
Merging data of i_pa0001_pa0002,i_pa0315 & i_pa0007 into i_outtab.
LOOP AT i_pa0001_pa0002 INTO w_pa0001_pa0002 .
    MOVE-CORRESPONDING w_pa0001_pa0002 TO w_final.
    READ TABLE i_pa0315 INTO w_pa0315 WITH KEY pernr =
   w_pa0001_pa0002-pernr
   kostl = w_pa0001_pa0002-kostl BINARY SEARCH.
    IF sy-subrc = 0.
      w_final-kostl   = w_pa0315-kostl.
      w_final-lstar   = w_pa0315-lstar.
      w_final-werks_p = w_pa0315-werks.
      w_final-lifnr   = w_pa0315-lifnr.
      w_final-ebeln   = w_pa0315-ebeln.
      w_final-ebelp   = w_pa0315-ebelp.
      w_final-lstnr   = w_pa0315-lstnr.
    ENDIF.
    READ TABLE i_pa0007 INTO w_pa0007 WITH KEY pernr =
   w_pa0001_pa0002-pernr BINARY SEARCH.
    IF sy-subrc = 0.
      w_final-schkz = w_pa0007-schkz.
    ENDIF.
    READ TABLE i_t527x INTO w_t527x WITH KEY orgeh = w_pa0001_pa0002-orgeh
    BINARY SEARCH.
    IF sy-subrc = 0.
      w_final-orgtx = w_t527x-orgtx.
    ENDIF.
    READ TABLE i_t528t INTO w_t528t WITH KEY plans =
w_pa0001_pa0002-plans BINARY SEARCH.
    IF sy-subrc = 0.
      w_final-plstx = w_t528t-plstx.
    ENDIF.
    APPEND w_final to i_outtab.
ENDLOOP.
ENDFORM.                    "f001_get-select_data
*&      Form f002_display_data
      text
FORM f0002_display_data.
Build the field catalog
ls_fieldcat-col_pos = '1'.
ls_fieldcat-fieldname = 'PERNR'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '2'.
ls_fieldcat-fieldname = 'NACHN'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0002'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '3'.
ls_fieldcat-fieldname = 'VORNA'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0002'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '4'.
ls_fieldcat-fieldname = 'MIDNM'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0002'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '5'.
ls_fieldcat-fieldname = 'BUKRS'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '6'.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '7'.
ls_fieldcat-fieldname = 'PERSG'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '8'.
ls_fieldcat-fieldname = 'PERSK'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '9'.
ls_fieldcat-fieldname = 'BTRTL'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '10'.
ls_fieldcat-fieldname = 'ABKRS'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '11'.
ls_fieldcat-fieldname = 'ORGEH'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '12'.
ls_fieldcat-fieldname = 'ORGTX'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'T527X'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '13'.
ls_fieldcat-fieldname = 'PLANS'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '14'.
ls_fieldcat-fieldname = 'PLSTX'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'T528T'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '15'.
ls_fieldcat-fieldname = 'SCHKZ'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0007'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '16'.
ls_fieldcat-fieldname = 'KOSTL'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '17'.
ls_fieldcat-fieldname = 'LSTAR'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '18'.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '19'.
ls_fieldcat-fieldname = 'LIFNR'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '20'.
ls_fieldcat-fieldname = 'EBELN'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '21'.
ls_fieldcat-fieldname = 'EBELP'.
ls_fieldcat-tabname = 'i_outab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '22'.
ls_fieldcat-fieldname = 'LSTNR'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '23'.
ls_fieldcat-fieldname = 'BEGDA'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '24'.
ls_fieldcat-fieldname = 'ENDDA'.
ls_fieldcat-tabname = 'i_outtab'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
Display the list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = sy-cprog
     i_callback_user_command = 'USER_COMMAND'
      it_fieldcat             = lt_fieldcat
    TABLES
      t_outtab                = i_outtab.
ENDFORM.                               " F_DISPLAY_DATA

Hi,
check the system defined program BCALV_EDIT_05.
rgds,
bharat.

How to display the alv report blocks wise with out using the blocked alv

Hi
How to display the alv report with out using the blocked alv function module.
Thanks
Chinnu

see this Standard Program
RPR_ABAP_SOURCE_SCAN

Why do we use SALV_WD_TABLE in ALV?

why do we use SALV_WD_TABLE in ALV? I was using this in Used Web Dynpro Components.

The web dynpro component SALV_WD_TABLE is used for incorporating ALV into a web dynpro (screen). You would declare it as a used component and then embed it into the container of the view that should use ALV. I hope this helps.
- April King

What are the function modules used in interactive ALV and parameters?

what are the function modules used in interactive ALV and parameters?

hi sunil
check these links,
About ALV:
http://www.geocities.com/mpioud/Abap_programs.html
ALV Group Heading
http://www.sap-img.com/fu037.htm
and few more,
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
also run the folowing code and see
check this sample code.you will be well versed with all the events of a interactive alv report.mark points if useful.
*& Report ZALV4_INTERACTIVE *
*& interactive alvs *
REPORT ZALV4_INTERACTIVE NO STANDARD PAGE HEADING
MESSAGE-ID ZMSG
LINE-COUNT 37(3)
LINE-SIZE 134.
TYPE-POOLS : SLIS.
TABLES DECLARATION ********************
TABLES : VBRK, " BILLING MASTERS TABLE
VBRP. " BILLING ITEM TABLE
TYPES DECLARATION ********************
TYPES : BEGIN OF TY_VBRK, " types for billing masters table
VBELN TYPE VBRK-VBELN, " billing document
WAERK TYPE VBRK-WAERK, " document currency
VKORG TYPE VBRK-VKORG, " sales organization
FKDAT TYPE VBRK-FKDAT, " billing date
BUKRS TYPE VBRK-BUKRS, " company code
BUTXT TYPE T001-BUTXT, " company name
NETWR TYPE VBRK-NETWR, " net currency value
LINE_COLOR(4) TYPE C,
END OF TY_VBRK.
TYPES : BEGIN OF TY_VBRP, " types for billing document item data
POSNR TYPE VBRP-POSNR, " billing item
FKIMG TYPE VBRP-FKIMG, " actual invoiced quantitty
VRKME TYPE VBRP-VRKME, " sales unit
NETWR TYPE VBRP-NETWR, " net currency value
MATNR TYPE VBRP-MATNR, " material number
ARKTX TYPE VBRP-ARKTX, " short text for sales order item
END OF TY_VBRP.
FIELD CATALOG ********************
DATA : WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
LAYOUT DECLARATION ********************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV.
EVENTS DECLARATION ********************
DATA : TY_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
PF STATUS ********************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
USER COMMAND ********************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
INTERNAL TABLES ********************
DATA : IT_VBRK TYPE TABLE OF TY_VBRK, "internal table for billing master
IT_VBRP TYPE TABLE OF TY_VBRP, "internal table for billing item
*internal table for field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
WORK AREA ********************
DATA : WA_VBRK LIKE LINE OF IT_VBRK, "work area for billing master
WA_VBRP LIKE LINE OF IT_VBRP. "work area for billing item
VARIABLE DECLARATION ********************
DATA : V_DATE TYPE SY-DATUM, " variable to store date values
V_VBELN TYPE VBRK-VBELN, " variable for billing document
V_FKDAT TYPE VBRK-FKDAT, " variable for billing date
V_FLAG(1). " variable for flag
SELECTION SCREEN ********************
SELECT-OPTIONS : S_VBELN FOR VBRK-VBELN , " Billing document
S_FKDAT FOR VBRK-FKDAT, " Billing date
S_MATNR FOR VBRP-MATNR. " Material number
PARAMETERS : R1 RADIOBUTTON GROUP G1, "whole item details
R2 RADIOBUTTON GROUP G1. "selected item details
INITIALIZATION ********************
INITIALIZATION.
V_FLAG = 'X'.
V_DATE = SY-DATUM - 20.
S_FKDAT-SIGN = 'I'.
S_FKDAT-OPTION = 'EQ'.
S_FKDAT-LOW = V_DATE.
S_FKDAT-HIGH = SY-DATUM.
APPEND S_FKDAT.
SELECTION SCREEN VALIDATION ********************
AT SELECTION-SCREEN.
PERFORM CONVERSION. " performs data conversion for input
PERFORM VBELN_VALIDATE. " validating the billing document
PERFORM FKDAT_VALIDATE. " validating the billing date
START OF SELECTION ********************
START-OF-SELECTION.
SET TITLEBAR 'AAAA'.
PERFORM VBRK_POPULATE. " populating the billing master detais
PERFORM FIELDCATALOG. " designing the field catalog
PERFORM EVENTS. " performing the events for top of page
PERFORM DISP_BASICLIST." displaying the basic list
*& Form VBELN_VALIDATE
text validating the billing document
--> p1 text
<-- p2 text
FORM VBELN_VALIDATE .
IF S_VBELN IS INITIAL.
MESSAGE E000 WITH 'Make entries in all required fields'.
ELSE.
SELECT SINGLE VBELN
FROM VBRK
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DOCUMENT DOESNT EXIST'.
ENDIF.
ENDIF.
ENDFORM. " VBELN_VALIDATE
*& Form FKDAT_VALIDATE
text validating the billing date
--> p1 text
<-- p2 text
FORM FKDAT_VALIDATE .
SELECT SINGLE FKDAT
FROM VBRK
INTO V_FKDAT
WHERE FKDAT IN S_FKDAT.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DATE DOESNT EXIST'.
ENDIF.
ENDFORM. " FKDAT_VALIDATE
*& Form VBRK_POPULATE
text populating the billing master details
--> p1 text
<-- p2 text
FORM VBRK_POPULATE .
DATA : LD_COLOR(1) TYPE C.
LD_COLOR = 5.
SELECT VBRK~VBELN
VBRK~WAERK
VBRK~VKORG
VBRK~FKDAT
VBRK~BUKRS
VBRK~NETWR
T001~BUTXT
FROM VBRK INNER JOIN T001
ON VBRKBUKRS = T001BUKRS
INTO CORRESPONDING FIELDS OF TABLE IT_VBRK
WHERE VBRK~VBELN IN S_VBELN AND
VBRK~FKDAT IN S_FKDAT.
LOOP AT IT_VBRK INTO WA_VBRK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBRK-LINE_COLOR.
MODIFY IT_VBRK FROM WA_VBRK.
ENDLOOP.
ENDFORM. " VBRK_POPULATE
*& Form CONVERSION
text data conversion to take leading zeroes into account
--> p1 text
<-- p2 text
FORM CONVERSION .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = S_VBELN
IMPORTING
OUTPUT = S_VBELN.
ENDFORM. " CONVERSION
*& Form DISP_BASICLIST
text displaying the basic list
--> p1 text
<-- p2 text
FORM DISP_BASICLIST .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISP_BASICLIST
*& Form FIELDCATALOG
text designing the field catalog
--> p1 text
<-- p2 text
FORM FIELDCATALOG .
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DOCUMENT'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'DOCUMENT CURRENCY'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VKORG'.
WA_FIELDCAT-SELTEXT_L = 'SALES ORGANIZATION'.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'FKDAT'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DATE'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY CODE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUTXT'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY NAME'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM. " FIELDCATALOG
*& Form SET_PF_STATUS
text set the pf status
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50658_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text set the user command
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'CLICK'.
IF R1 = 'X'.
IF NOT IT_VBRK IS INITIAL.
SELECT POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
FOR ALL ENTRIES IN IT_VBRK
WHERE VBELN = IT_VBRK-VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH ' NO BILLING DETAILS FOUND'.
ELSE.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG.
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY.
ENDIF.
ENDIF.
ENDIF.
IF R2 = 'X'.
READ TABLE IT_VBRK INTO WA_VBRK INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF WA_VBRP
WHERE VBELN = WA_VBRK-VBELN.
ENDIF.
APPEND WA_VBRP TO IT_VBRP.
ENDIF.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG. "designing the field catalog for items
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY. "displaying the secondary list
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'UP'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CALL TRANSACTION 'SE38'.
ENDCASE.
ENDFORM. "SET_USER_COMMAND
*& Form DET_FIELDCATALOG
text designing the field catalog for item details
--> p1 text
<-- p2 text
FORM DET_FIELDCATALOG .
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'POSNR'.
WA_FIELDCAT1-SELTEXT_L = 'BILLING ITEM'.
WA_FIELDCAT1-COL_POS = 1.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'FKIMG'.
WA_FIELDCAT1-SELTEXT_L = 'INVOICE QUANTITY'.
WA_FIELDCAT1-COL_POS = 2.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'VRKME'.
WA_FIELDCAT1-SELTEXT_L = 'SALES UNIT'.
WA_FIELDCAT1-COL_POS = 3.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'NETWR'.
WA_FIELDCAT1-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT1-COL_POS = 4.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'MATNR'.
WA_FIELDCAT1-SELTEXT_L = 'MATERIAL NUMBER'.
WA_FIELDCAT1-COL_POS = 5.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'ARKTX'.
WA_FIELDCAT1-SELTEXT_L = 'SALES ORDER ITEM'.
WA_FIELDCAT1-COL_POS = 6.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_LAYOUT1-ZEBRA = 'X'.
ENDFORM. " DET_FIELDCATALOG
*& Form DET_LISTDISPLAY
text displaying the secondary list
--> p1 text
<-- p2 text
FORM DET_LISTDISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT1
IT_FIELDCAT = IT_FIELDCAT1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_VBRP[].
ENDFORM. " DET_LISTDISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR TY_EVENTS.
TY_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
TY_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND TY_EVENTS TO IT_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
SKIP.
ULINE.
WRITE :/2 ' DATE :', SY-DATUM,
45 'INTELLIGROUP ASIA PVT LTD',
110 'TIME :', SY-UZEIT.
WRITE : /3 'USER :', SY-UNAME,
45 'TITLE :', SY-TITLE,
110 'PAGE :', SY-PAGNO.
ULINE.
SKIP.
ENDFORM. "TOP_OF_PAGE
Cheers
navjot
Reward with points if it is helpful
Message was edited by:
navjot sharma

Filter using IT_FILTER with ALV

hi Abaper
I want use IT_FILTER in ALV . But I dont know how use this parametrs . Can you help me ?

Hi Turgut,
Did u get answer for your question. If yes, can you please share,
Regards
Sharat

How can we use hyperlinks in forms 9i

How can we use hyperlinks in forms 9i..
I looked at the sample but it appears blank.
Will you please tell me what is the code to hyperlink display items in forms 9i.
Thanks in advance.

Download the 10gR2 demo zip file. Its called "hyperlink". Note that this is a demo only and may or may not work the way you want or even as we intended. No QA has been performed on this PJC.

Use HYPERLINK In ALV

Similar Messages

Maybe you are looking for