Moving to specific field in new record with mouse

Hi,
Is there any way of navigating directly to a field (by clicking on it with the mouse) on a new record in a block? The default behavior appears to be to focus on the first field(?)
Thanks in advance,
Nik

The order in the object navigator is ok.
You can check also these properties:
keep cursor position, insert allowed and update allowed.
If an item has insert allowes set to NO, then I think you could not move on it during creation of new record.
Hope it helps you,
Fabrizio
If this answer is helpful or correct, please mark it. Thanks.

Similar Messages

Any BAPI/Function Module for adding new record with dates in PA0027

Hi all,
I am tryig to find is there any BAPI/Function module for updating new record with Start Date and End date for specified Personal Number in PA0027 Table.
In PA0027 table i will be passing start date and end date for selected personal number, it needs to add new record with this details in the table checking the condition that this start date and end dates should not be between any of of start date and end dates for the specified personal number.
thanks for ur time.
Murali

Hi Raj/Suresh thanks for ur answers.
but i am having a problem,i gave this values.
INFTY               -
            0027
NUMBER              -
            00000010
SUBTYPE             -
            010
OBJECTID
LOCKINDICATOR
VALIDITYEND         -
            03/12/2006
VALIDITYBEGIN       -
            03/01/2006
RECORDNUMBER        -
            000
RECORD              -
            P0027
OPERATION           -
            CHK
TCLAS               -
            A
DIALOG_MODE         -
            0
NOCOMMIT            -
            Y
VIEW_IDENTIFIER
SECONDARY_RECORD
i am getting short dump saying that
The source field is too short.
The current program, "SAPLHRMM", tried to assign a field to a field symbo
However, the field is shorter than the type of the field symbol, which
is not allowed.
The statement in question is in the form ASSIGN f TO <fs> CASTING or
ASSIGN f TO <fs> with a field symbol that was created using the
STRUCTURE addition.
I tried operation - Chage,Create (same thing for all inputs)
is this correct funtion moduel for my requirment?
what ever i am passing the start and end dates this should check in the table records with this personal number and if this start date and end dates are not between of any start and end dates then it should add new record with this dates.
Thanks for ur time.
Murali.

Reducing time while Filtering Out New Records with the Same Key

Hi Experts,
I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key . While for other master data it hardly takes 5 minutes.
Any pointers how to reduce the timeu2026
Thanks in advance
Sam

Hello,
No there is no need to do that change then.
Can you tell me are you doing a full load daily to 0MATERIAL object.
why dont you use delta.
Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
Regards,
Shashank

JDeveloper 10g Creating a new record with trigger sequence primary key

Hi there, I'm sorry to post this incredibly simple question and I'm sure that someone must have answered this on this forum before but the searching of this site is incredible slow and painful and after 30 mins I can't find help.
I am using a struts Data Action to create a new record in the database and then being forwarded to an edit page where I can enter the new details. Then when the details are entered I am clicking an update button and returning to a browse screen where I can either commit the change to the database or rollback. Sounds pretty simple but I am really struggling with trying to get the trigger of the number sequence to work properly.
Ideally I would like to click the create new record button and then the primary key/triggered sequence number is already displayed on the empty form...
... but if this is too tricky or not possible then I would like the user to either not enter any value in the key field (which currently causes error - JBO-27014: Attribute PoNo in PO_SYS_MODULE.PoSystemView1 is required) OR the user enters a number and the trigger overwrites this number with the next in the sequence.
I can enter a new record if I look in the manager console and see the next number in the sequence and then create the record using this number and then click commit twice, as the first time I get the error: JBO-25019: Entity row of key oracle.jbo.Key[154 ] not found in PoSystem. Or if I enter a value 5 times greater than the next in the sequence I have to click the commit button 5 extra times to get the sequence to match the input.
I hope that this lengthy explanation fills you in on my problem, there must be a simple solution to this and I will be VERY grateful to anyone who can help me.
Many thanks
Ben Sayers (clearly a newbie)

Hi,
ADF Business Components handles this for you - unless yo prefer doing this manually. In the Entity Object, set the PK attribute's type to DBSequence. Then create a database sequence and use a database trigger to add the sequence value on insert
Frank

Updating field when new records saved.

Hi,
I was wondering if there are any suggestions on updating a picklist field when a new record is saved (as field updates only work for modified records).
We recently created a custom Probability % field that is tied to both the Sales Stage and another custom picklist field called "Business Type" (has two options - New or Existing). The Probability % field is updated based on a simple workflow that says if Sales Stage = x and Business Type = y, then Probability % = z.
For example, if the Sales Stage is = to "Validation" and the Business Type is = to "New", the Prob. % will be 5. If the Sales Stage is = to "Validation" and the Business Type is = to "Existing", the Prob. % will be 10... (just so you get the idea).
Since the workflow is tied to modified records, the new records keep missing the Probability % field.
Any suggestions on how we can get those newly created records have an updated Prob. % field would be helpful.
Thanks in advance!

Thanks for the response, Min.
1) I've thought about the post default value, but the problem we encounter is that the user might not create an Opportunity in the very first sales stage- is there a way to place a default in the Prob. % field depending on the sales stage the record is created with?
2) I thought fields could only be updated when modified records saved - it isn't an option with the "new record is saved". Is there a workaround? I'm still quite new at this, so any help on how I can create a workaround would be great!
Thanks again.

How to create new record with old values

Dear all
i have creation page with 45 fields are there
user will enter all the fields and save it will call to non editable mode
if user will click on change button it will call to editable mode
in that my requirement is user wont change among those ites(45 items)clcik on save again it will call to view mode
in that user will change any one of the value among 45 items and click on save button i need to create one more record in database
if user wont edit any one of the field out of 45 items i dont want to create new record in database
how can we achieve thsi functionality
Regards
Sreekanth

Hi Srikant,
When user may edit the record, the same row may get updated in vo. Thus over writing existing row instead of creating new row.
Approach1..
On the page where user may edit records, instead of presenting records of existing row, present copy of existing row. So
In AM... (Later on you can put vo logic to its proper place, i.e. vo java file)
public void viewPageCallSetup()
Row originalRow=vo.createRow();
Row dummyRowForEdit=vo.createRow();
//COPY THE ORIGINAL ROW TO DUMMY ROW. IF THERE IS DIRECT METHOD TO CREATE COPY OF EXISTING ROW, THAT MAY BE MUCH BETTER.
for(int i=0;i<vo.getAttributeCount()-1; i++)
dummyRowForEdit.setAttribute(i, originalRow.getAttribute(i));
vo.insertRow(dummyRowForEdit);
vo.setNewRowState(Row.STATUS_INITIALIZED);
vo.setCurrentRow(dummyRowForEdit);
call this method in contoller's processRequest..
string oid=pagecontext.getparameter("oid");
if(pageContext.getparameter("Purpose").equals("Edit")) //Means user clickED the edit button so we need to replicate the row
am. viewPageCallSetup(oid); //calling this method in am
else
In PFR...
if(pageContext.getparameter("Purpose").equals("Edit"))
am.xxcostedit(oid); //calling this method in am
in case user selects "Cancel" on edit form,we need to remove the duplicate row. So in AM write a method to remove the duplicate rowd on click of "Cancel" button on edit form.
Rest of the logic is same for "Save" button. Just say commit.
Abdul Wahid

DTP error: No Message: Filter Out New Records with the Same Key

Hello SDN,
I have looked up solutions for this problem, but didnt find anything suitable. I am getting this error in multiple places: when i load pure master data into IOs like 0VENDOR, 0PLANT etc. or when I load DSOs like 0FIAP_O03.
When I checked the load in sdn, one of the solutions was to apply note: 1489178 , but in this case, the user had nothing selected in his 'semantic key' list. Whereas, in my case.. 0PLANT is checked ...eventhough the other fields are disabled. So, I think my DTP is accurate.. as 'plant' is the only key field here. But it still fails .. and so does 0VENDOR load. Moreover... the DSO load is crucial for our reports in Prod and its failure is a bigger issue for us.
Has anyone seen this problem? Is there another solution other than the above note?
Regards.

Hello Arvind,
If I select that option, will it delete one record if it finds 2 records with the same semantic key in 1 data packet. Also, will it delete a record if it finds that there is already a record existing in the data target with the same semantic key.
I think, both of the above scenarios will result in incorrect data. From my understanding, 'Handle Duplicate Keys' is mostly used to filter out master data.. as in some instances.. you might get duplicate entries.
But, in my case, the same error is happening in the case of data load from 0fi_ap_4 --> 0fiap_o03. What happens is... the overall status of the DTP becomes green.. but when you look at details section, the process stops at this message which is in yellow. Because of this, the DTP status in the PC remains yellow.. and finally turns red.. and the PC turns red.
From my knowledge, it appears more like a bug. I was hoping to find a SAP NOTE which has some manual instructions that can resolve the issue, since the above NOTE asks for a support pack upgrade.. which would need a whole lotta testing.
Regards.

Moving DP Content to a New Server With Same Name

We are currently in the middle of a server OS refresh from 2k8 to 2k12 R2. Some of the servers are DPs so I need to move the content from one server to another. The big problem is that the new server must have the same name.
I've read this thread http://social.technet.microsoft.com/Forums/en-US/1ffcaa47-9bf8-476d-965e-28350a6bef1b/move-content-from-old-dp-to-new-dp-at-same-remote-site?forum=configmanagerapps which kind of covers my issue but I presume this person was going to
a server with a new name.
Has anyone done this? Is it possible?
Unless there is something clever the only way I see to do this is to uninstall the DP role from the current server, remove the current server from the domain, add the new server with the same name, re-install the DP role and then re-distribute all the content
to the new server. I'd rather not do this as the DP is on a remote site so all the content will be going over the WAN.
I am running SCCM 2012 SP1 CU3.
Any ideas?

Hi,
>>So can I pre-stage from the old server to the new server or does the pre-staging have to be done from the site server?
Yes, you could prestage content from the old server to the new server. Prestaged content files could be created from Configuration Manager Administrator Console.
>>What is the order of the process?
The following blog could help you to prestage content.
http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT204318 moving itunes library to a new computer with different partition letters

Want to move my itunes library to a different computer (actually my older computer, which will be a dedicated itunes box). I know how to do it, except for one thing - am not sure how it affects things that in its new home it will be on partition 'D' rather than 'E' where it is now. Can I still just copy everything over (via external drive) or will everything be left with the wrong drive letter?

As long as you've moved the complete library (database, media folders, artwork, ...), and its in the "standard" layout where:
the iTunes Media folder is in the same folder that contains the database file (iTunes Library.itl), and
all your media files are contained within the hierarchy of folders under iTunes Media
you're fine. First time you run after the change of drive letters, or moving the drive containing to another computer, hold down SHIFT while you start iTunes; when you get this prompt:
click on Choose Library..., navigate to the iTunes library folder on the drive holding the library, select the iTunes Library.itl file and click Open.

Moving oracle database to a new server with an upgraded oracle software

Hi Guys,
Here is the scenario, we have an existing Oracle 9.2 demo database on a Solaris 5.9 server. I was asked to transfer this to another server with same OS but with an Oracle 10g software installed. The original plan was to mount the exisiting Oracle home from the original server to the new server and from there copy all the database files and bring up the database.
Here are the steps:
- Issue an "alter database backup controlfile to trace", get the script from the trace file
- Copy all database files to the new server
- Edit parameter files
- Do a startup mount recreate the control files, do a recover database, and startup the database on the new server.
I suggested that we to a transport tablespace but due to limited resources and that the 9.2 database does not have this feature we can't perform this process. I also can't do a exp/imp of the database since we really have limited resources on a disk. I was wondering if the steps I enumerated above are correct? Or would result in an error?

Hi,
why you want to recreate the controlfile, does the mount point locations are changing from old server to new server?
if you recreating controlfile new incarnation starts, keep in mind.
you have the downtime to upgrade.. :)
shutdown
take cold backup and move to new server.
create the directory structure as exist in PFILE including CRD files.
install software
startup upgrade
upgrade database(need to add sysaux TBS)
shut immediate
startup
*@?/rdbms/admin/utlrp.sql*
change hostname in listner.ora/tnsnames.ora files.
Thanks

Unable to create new records with FOX formula (IP)

Dear Guys,
We created a FOX formula that could not create any records within an empty infocube (got 0 records read, 0 created, 0 changed, 0deleted). how to change this formula to make sure record are created?
DATA K_0FISCPER3 TYPE 0FISCPER3.
FOREACH K_0FISCPER3 IN SELECTION.
{ 0AMOUNT, K_0FISCPER3 } = 100.
ENDFOR.
Many thanks!
Kind Regards
Olivier DESFOUR

Hello,
this behaviour is explained in the docu.
Internal Data Objects and Address
The internal data objects that are edited are subsets of the transaction data contained in the planning package. The user executes a planning function by selecting a package and a parameter group. This package is divided into smaller data objects made up of transaction data. If a formula requires reference data, these data objects are also created from this reference data. Note: If it is not possible to create data objects, a formula is not executed.
You will find this detailed docu, if you press F1 in the formula editor in transaction BPS0.
For BI-IP this detailed docu will be part of one of the next docu shipments.
The docu belongs to the data element UPC_Y_FLINE. Therefore you can access the docu from the transaction SE11. Choose data type = UPC_Y_FLINE. Press the button DISPLAY.
Best regards
Hans-Juergen Schwab

Scrolling of grid records with mouse scroll

Hi,
Is it possible to scroll iGrid records using scrollable mouse?
Your comments are appreciated.
Best Regards,
Kedar

Kedar,
take a look at the following thread with the same question:
[http://forums.sdn.sap.com/click.jspa?searchID=47087653&messageID=8453941]
Maybe you are lucky in MII 12.1. Previous versions cannot scroll with the mouse in iGrids.
Michael

Save VO with Edited fields But as a New Record, Old one should not change

Hi All,
I have set of VOs, those are connected by View links, in such a way One VO comes under Another up to 7 level,
Like
level----1
2
3
4
5....
And My requirement is if I made any of the Operations,( Insert/update/Delete) on any of the VO's(Records of the VO) that comes in this flow, I have to save it as a new record with the Edited Fields , new Id and new revision number, Also I have to keep the original one unchanged.
that is After updating the record I should have the old one as a Library and New one as the active record.
Please help....

Hi Timo,
The JDev I am using is Studio Edition Version 11.1.1.2.0 and Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
And the Relationships between the VO's are *:* When I change a record of level 3, I need to copy all the other 6 levels along with the updated one.
The revision Number is in the Top VO, which will increment but all the other record will remains the same other than Id and updated fields.
That is , there should be a new set of records with the same data with updated fields, and the old set remain the same, which can be used as a Library for reference.
Thanks & Regards,
Ranjith C

Edit existing or add new record based on key field

Greetings and Salutations!
I am working on an APEX 3.0 application and I need to verify a key field value to determine if the record already exists, if it does not exist, I need to add it, if it does exist, I need to update/edit it. I'm not sure how to do this, but below is what I am considering (in pseudo code):
get the asset_tag #
asset_search_value = :asv
select asset_tag from asset_table were asset_tag = :asv
IF :asv (unique key value is found) UPDATE
else
INSERT (create new record with asset_tag = :asv)
ENDIF
I hope that my explanation is clear.
I have considered doing a function to search for a key match and if one exists, I can proceed to the UPDATE screen, otherwise, I can proceed to that INSERT screen.
I'm intermediate with APEX and little better at pl/sql, but rapidly learning.
I should mention that my problem is coming up with a method to see if my query returns no records.
Thanks in advance for your assistance!
Charles
Message was edited by:
cp29020

Charles,
You said you were thinking about creating a function to search for a key match. First, I suggest you do so in a package. A function that returns a boolean should do. Something like what follows:
FUNCTION asset_exists (
   p_id IN TABLE_NAME.ID%TYPE
   RETURN BOOLEAN
AS
   l_retval BOOLEAN;
   CURSOR asset_exists_test_cur
   IS
      SELECT *
      FROM table_name
      WHERE id = asset_exists.p_id;
   l_asset_exists_test ASSET_EXISTS_TEST_CUR%ROWTYPE;
BEGIN
   OPEN asset_exists_test_cur;
   FETCH asset_exists_test_cur INTO l_basic_user_test;
   l_retval := asset_exists_test_cur%FOUND;
   CLOSE asset_exists_test_cur;
   RETURN l_retval;
END asset_exists;Then you can use that function as needed to branch your logic. Remember to create a unique constraint on the table if it is not the primary key or doesn't already have one.
Dan

Is there a way for the Yosemite maps app to add address to an existing contact (in contacts app) instead of creating new contact record with blank name (not useful)?

I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter

I was using the maps app in yosemite to look up an address, once I was able to verify the address, I wanted to add that address to an existing contact record in the contacts app. When I clicked on the option to add address to contacts, it unfortunately creates a new record with the address in it, however, the rest of the contact is blank.
My question is: is there a way to prompt the user (me), to select whether they want to create a new contact or add it to an existing contact?
Thanks in advance for your help!
Regards,
Peter

Moving to specific field in new record with mouse

Similar Messages

Maybe you are looking for