Moving vendor-scenario to customer namespace

Hello,
I developed a B1if Scenario for my customer. I am using a particular vendor Namespace in my development System. As the customer should be able to Change the Scenario by himself, I like to move it to customer Namespace.
How can i achieve this?
Kind Regards
Christian

Hello Christian,
the copy-package functionality (shift namespace) is planned with upcoming B1iF 9.0 pl13 and B1iSN9.0 pl04. The functionality will be accessible via Scenarios -> Package Design -> Tools -> Copy Package.
At the moment, please create a new package in the customer namespace and copy your scenario step(s) via (Scenarios -> Step Design -> Copy). Assign the copied step(s) to the newly created package.
Best regards
Bastian

Similar Messages

  • Scenario:vendor also a customer (payment has to knock off)

    Dear Experts
    Scenario:vendor also a customer (payment has to knock off)
    Vendor invoice $6000
    customer invoice$6000
    when i am running APP run manually, on editing the payment proposal and assigning house bank and payment method the document is posting.
    its updating in REGUH table.
    If i run the APP run without edit proposal ,only payment is done for vendor ,customer is showing as a open item.(document is not knock off).
    Its showing the error message in display log
    Job started
    Step 001 started (program SAPF110S, variant &0000000003167, user ID Log for proposal run for payment on 07.04.2011, identification RUN2
    Due items with currency INR, pmnt method - items total is > 0
    ...none of the payment methods defined can be used for these items
    Information re. vendor 21 / customer 2600018 / paying company code 9150 ...
    ... payment not possible because of reported error
    Information re. vendor 21 / customer 2600018 / paying company code 9150 ...
    Payment with currency INR, payment method P: No valid payment procedure
    Information re. vendor 21 / customer 2600018 / paying company code 9150 ...
    ... payment not possible because of reported error
    End of log
    Job finished
    I have maintained below parameters in vendors and customer master:
    1)In control tab i have maintained customer and vendor no.
    2)in payment transaction tab i have maintained payment method, house bank ,selected the check box clrg with customer and vendor

    Please check that same payment method is assigned to both customer and vendor
    Please also check out the OSS note:-
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=305414]
    Regards
    Gaurav

  • Vendor Treat as Customer Complicated Scenario

    Respected Sir
    Vendor treat as customer , i had done all settings as per vendor & customer master data.
    1) Vendor treat as customer this is also one of the scenario in Dairy. when vendor invoice amount & customer invoice amount should be deducted & display in F-53 & FBL1N.
    Example:
                  Vendor Invoice Rs.125000.00
               Customer Invoice Rs. 75000.00
                         Total Amount 45000.00
    2) When i do payment to vendor in F-53 ,only display Rs.45000.00
    So what should i do for this plz guide me .
    Correct/Good answer get reward.
    Thanks & regards,
    Girish

    Hi,
    What I understand is that you have a vendor invoice for 125000/- and a customer Invoice for 75000/-.
    As this customer is also a vendor you need at the time of making the balance amount of 50000/- you only want this 50000/- to appear in the open item list.
    I the above understanding of mine is correct,
    You need to change your process. You advice your client to first do residual clearing using F-44.
    Then at the time of payment using f-53 you will get the balance 50000/- is only displayed.
    keep in mind that the number ranges that you are having in you system. The system will generate a new document with a different number.
    Sarma

  • Runtime error - FBL1N - vendor balance with customer line item

    Hi gurus,
    One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
    when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
    Runtime Errors         PERFORM_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
         not caught in
        procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The program "RSDBRUNT" is meant to execute an external PERFORM,
        namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
        this routine does not exist.
        This may be due to any of the following reasons:
        1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
        The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
        the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
        2. If the program SAPMSSY1 is involved in the runtime error, one of
        the function modules called via RFC is not flagged as remote-capable.
        (see Transaction SE37  Goto -> Administration -> RFC flag)
        3. There is an inconsistency in the system. The versions of the
        programs "RSDBRUNT" and "RFITEMAP " do not match.
    Warm regards,
    Dhananjay R.

    Hi martin
    still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
    please suggest me.....what to do ?
    Than'x
    Dhananjay R

  • Vendor payment and customer recipts across company codes

    Hi all,
    We are having 4 company codes in US.The vendors and customers are spread across company codes.
    1st scenario:
    Vendor "abc" has a debit balance os 5000 in company code A. In company code B, the same vendor has credit balance of 10000.
    How can we net the balances in both compnay codes and pay the difference to the vendor. The client has separate house banks for each company code.
    2 nd scenario:
    A customer sends a check for 2500. which needs to be applied against company code A (500) and Company code B (2000)
    How does the payment and receipts needs to be applied across company codes. Kindly suggest.
    Regards,
    Amulya.
    Edited by: amulya chowdary on May 21, 2010 4:31 PM

    Hi,
    You need to configure cross company clearing thru OBYA.
    Your queries can be addressed either treating other company code as the vendor/customer or clearing to a inter company GL.
    Best Regards,
    Madhu

  • FBL1N error - vendor balance with customer item

    Hi gurus,
    One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
    when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
    Runtime Errors         PERFORM_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
         not caught in
        procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The program "RSDBRUNT" is meant to execute an external PERFORM,
        namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
        this routine does not exist.
        This may be due to any of the following reasons:
        1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
        The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
        the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
        2. If the program SAPMSSY1 is involved in the runtime error, one of
        the function modules called via RFC is not flagged as remote-capable.
        (see Transaction SE37  Goto -> Administration -> RFC flag)
        3. There is an inconsistency in the system. The versions of the
        programs "RSDBRUNT" and "RFITEMAP " do not match.
    Warm regards,
    Dhananjay R.

    Hi Dhananjay,
    Pls show the error/ dump to the ABAPer
    Regards,
    Kiran

  • Non-moving vendors

    Dear All,
    Scenario: I have a requirement where the user gives the posting date and vendor account type and gets a list of vendors between the posting dates.
    He wants these to be filtered from the Vendor master list
    and the filtered list is the final report.
    Approach: I have a multiprovider combining a General Ledger ODS (which uses BSEG) and also the infoprovider 0vendor. Thus I am able to get the list of vendors between the entered dates.
    Problem: However this list has to be excluded from the complete vendor list and what remains is the final report. How do I do this in one report and that too at runtime?
    Note: Please note that I have also tried everything based on the example of slow-moving items mentioned on sap.help.com but inspite of following all the instructions, I either get the complete vendor master list or the list according to the given dates.
    Please let me know
    Thanks to all in advance
    Mihir

    Mihir,
    Suppose you have created a variable for "Posting Date" as "vdate" it should be with "Single Value".
    I assume you have selected 0Calday in your rows.
    Open the Query Designer go to Rows box,right click 0calday,select Restrict, whatever value is there in the selection box on the right side remove it by moving it to left side.
    You will find the selection list box on the Top.Here you select "Value Range".
    In the Right Side list box select "Greater than or Equal to".(If you are taking list for moving vendors) or "Less than or equal to (If you are taking list of non-moving vendors).
    Click the "Variables" Tab button.There you can see the variable "vdate".Move it to right side.
    If you have select "less than or equal to " then
    You can see the "<=" symbol in green for the "vdate" vairable.
    Now save the query and run it.
    Hope it solves your problem.
    Please don't forget to reply if you have any problems.
    Regs
    Gopi.

  • How to specify custom namespace in generating WSDL for BAPI

    In the creation of the Web Service Definition(WSDL) for a rfc-enabled function module, I would like to specify the custom namespace rather than the default in /sap/bc/srt/rfc/sap/. And I could not change the path in the Service Definition after it is generated(greyed out in change mode).
    I have looked all over the SAP help and could not find any documentation for the change.
    Any advise?
    regards,
    Wai-ming

    Hi John,
    You've raised a good scenario.
    First of all let me say that the purpose of the DB polling transaction, is to have an option to initiate a process from a DB table/view and not to update multiple fields in a table (or have other complex manipulation on the table).
    So, when choose to update a field in a record, after reading it, you are "telling" the engine not to poll this record again. Sure, i guess you can find a solution/workaround for it, but I don't think this is the way....
    The question now is what to do?
    You can have another DB adapter where you can update the data after finishing the process. In that case, after reading the data (on polling transaction) - update the header.status = 'processed' for example, and after processing the selected data update the rest of the fields.
    Hope it make some sense to you.
    Arik

  • SAP Customer Exit - Customer Namespace (i.e. /ABC/)

    Hi ABAP Experts,
    The question I would like to ask is when taking advantage of a SAP customer exit, can you assign the work to a customer namespace (i.e. /ABC/) ?
    The problem seems to be that we want the majority of our custom development in our customer reserved namespace i.e. /ABC/.  Yet, to activate a customer exit, the ABAP code follows the old "Z" standard.  For example, customer exit EXIT_RMMR01RS_003 has the include ZXM08U03.  To activate this exit, one would create the include ZSM08U03 and include customer code.  Unfortunately, the include ZSM08U03 can't be assigned to a package with /ABC/.
    Any help would be greatly appreciated.
    Thanks,
    Jay

    i dont think so. the reserved name spaces are for specific vendor products, while exits are for all customers.so exits would not be able to use a reserved name space.. but within that exit ZXM08U03 you can create another include using /ABC/ name space

  • Key Fields for Vendor as a Customer

    Hi experts,
    I have to develope report for vendor payment, my senario is as follows
    - vendors which are also our customers,
    - payments done at every 15 days
    - I have to develope the payment summary report for this please tell me which are the key fields to be used for vendor as a customer to develope this report.
    - some deductions are carried out in MM side and some are carried in SD side
    Regards
    Amol

    HI,
    Vendor Number - LIFNR
    Customer Number - KUNNR
    These are from table LFA1.
    Also from the finance side use tables for payment details regup and reguh
    also please check on bsad bsas bsed bseg bses bsik bsis tables.
    Thanks& Regards,
    Kiran

  • Bapi For creation and change for Vendor Master and Customer Master

    I am looking for BAPI to create and change  Vendor Master and Customer Master which will not take me to standard SAP transaction but will work in the background
    Explanation: BAPI to delete material (BAPI_MATERIAL_DELETE) take you to standard SAP screen of T-Code MM06  but BAPI to create material (BAPI_MATERIAL_SAVEDATA) creates material in the background i.e. does not take you to standard SAP screen of T-Code MM01
    So in my case (i.e. to create and change  Vendor Master and Customer Master ) I want BAPI which would work like BAPI to create material (BAPI_MATERIAL_SAVEDATA)

    For general information,to find BAPIs associated with any business object :
    Transaction : BAPI - choose alphabetical tab - Find customer - (right side choose - tools - create bapi list and search ) , you will get all the BAPIs associated with this particular business  object
    Mathews

  • Vendor Scenario Advice required

    We have MDM 55 sp3 and need to implement the vendor scenario. Can someone advice on how the following scenarios can be implemented :
    1. We have vendor groups in R3. Now whenever an attribute changes for any vendor, we need MDM to change that attribute for all vendors that belong to the same vendor group and syndicate the data back to R3.
    Please advice the detailed steps for the same(we need information on the steps to configure MDM to change the attribute for all vendors of that group).
    2. Is it possible to dynamically pass a mask name from portal (MDM business package) and get data for that mask only back into the resultset iview of portal. Point to keep in mind is that we will always have the same user mapped and we need to pass the mask dynamically to the search iview.
    Any info would be appreciated
    Nirmal

    Hi Nirmal
      The automation process can be achieved by both E-catt(SAP R/3)& Testpartner(Non-SAP). Kindly go thru the E-catt doc before proceeding.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm">E-catt</a>
    E-catt basically talks about the scripts where we can record the sessions and customize the same for both Import & Export parameters and we can call Test partner scripts also.
    Steps to be followed...
    1. Install both E-catt & TestPartner in ur machine
    2. Start recording the SAP R/3 part in the e-catt editor and do the customization for the parameters..(Vendor group, attribute values)
    3. Test partner script can be created in the e-catt environment itself, as a external tool.
    4. Refer the Test partner script in the e-catt script.
    hope this might helps...
    cheers
    Alexander
    Note:Pls reward the points, if found solved ur problem.

  • Index for a PSA table is not in the "customer" namespace

    Hi,
    While loading data through infosource 0CO_OM_WBS_1 to
    data target 0IMFA_1 loading failes and the reason given is that the system reads data from PSA table /BIC/B0001060000 of 0IM_FA_IQ_9 and the index generated for this table supplied return code 14.
    I found no notes in the subject - with the syntax :
    Index for a PSA table is not in the "customer" namespace.
    thanks in advance for your help.

    Hi,
    I think you need to speak to your basis guys / DBA as index created on PSA table is not in your tablespace. He should be able to help you.
    Vikash

  • How to reconcile Vendor as a customer also.

    Hi gurus
    How to reconcile Vendor as a customer, suppose if I buy 1000/- and sold to same vendor 250/-. where i can configure,how to reconcile? i want configration part?
    Thank yo
    Anil

    Hi,
    The steps are -
    1. The customer number must be entered in the corresponding vendor master record
        a. FK02->General Data -> Control
            In the 'Account control' tab, in the 'Customer' field, enter the customer number
        b. In the Company Code Data --> Payment Transaction Accounting, select the checkbox - 'Clrg with Cust'
    2. The vendor number must be entered in the corresponding customer master record
        a. FD02->General Data -> Control
            In the 'Account control' tab, in the 'Customer' field, enter the vendor number
        b. In the Company Code Data --> Payment Transaction Accounting, select the checkbox - 'Clearing with vendor'
    3. For testing, create a vendor invoice through FB60 and customer invoice through FB70.  Note that customer and vendor are properly selected.
    4. For clearing the open items.  Use the Tcode F-32.  On clicking the 'Process open Items', the vendor invoice (KR) and customer invoice (DR) are shown automatically.  It will generate the FI document with proper entry.
    Note:  Partial / Residual payment between customer and vendor is also possible
    Regards,
    Sridevi
    Pls. assign points, if useful

  • Urgent-vendor as a customer

    Hi
    I want to treat vendor as a customer.
    I entered customer no on vedor master and vise versa.
    But i didnt find for ticking "Clr customer" "clr vendor"
    In vendor and customer master where should I get this tick fiels.
    its urgent

    An extra indicator is not necessary if you have entered the fields you mentioned.
    The clearance is done with F.13 transaction

Maybe you are looking for