Mplayer doesn't play anything, could not initialize video filters

When trying to play a video, this is what I get. I've tried changing the video driver, same error
[max@gayforceone ~]$ mplayer capture.avi
MPlayer 1.0rc2-4.3.2 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (Family: 15, Model: 3, Stepping: 4)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
115 audio & 237 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing capture.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
Detected NON-INTERLEAVED AVI file format.
VIDEO: [MJPG] 800x600 24bpp 15.015 fps 11713.4 kbps (1429.9 kbyte/s)
Clip info:
Name:
Software: guvcview-0.9.5
Comments: Fri Nov 28 06:58:53 2008
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG decoder)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
AO: [oss] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 800 x 600 (preferred colorspace: Planar 422P)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar 422P as output csp (no 1)
Movie-Aspect is nan:1 - prescaling to correct movie aspect.
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 1
SwScaler: reducing / aligning filtersize 9 -> 8
[swscaler @ 0x89d5f50]SwScaler: BICUBIC scaler, from yuv422p to yuv420p using MMX2
[swscaler @ 0x89d5f50]SwScaler: using 4-tap MMX scaler for horizontal luminance scaling
[swscaler @ 0x89d5f50]SwScaler: using 4-tap MMX scaler for horizontal chrominance scaling
[swscaler @ 0x89d5f50]SwScaler: using 1-tap MMX "scaler" for vertical scaling (YV12 like)
[swscaler @ 0x89d5f50]SwScaler: 800x600 -> 800x600
VO: invalid dimensions!
FATAL: Cannot initialize video driver.
VDec: vo config request - 800 x 600 (preferred colorspace: Planar 422P)
VDec: using Planar 422P as output csp (no 1)
Movie-Aspect is nan:1 - prescaling to correct movie aspect.
VO: invalid dimensions!
FATAL: Cannot initialize video driver.
FATAL: Could not initialize video filters (-vf) or video output (-vo).
Exiting... (End of file)

I've tried all the options in gmplayer, they all don't work. I'm assuming the command line carries out the same functions. I've tried a couple (but not all) and they didn't work either.

Similar Messages

Could not initialize disc burning engine???

For the last few months, any time that I try to burn a DVD I get this error.
I have tried working around the problem by burning to a folder, but PE doesn't do anything (just says 'burning to a folder' and stays on 0%).
Any ideas on why it's doing this or what I could try to do to solve the problem?
Thanks!
Erik

Thanks, Steve, for the info. Here's what I've done:
1. I'm able to create a pure AVI project. I do that and then go to share to disc and get the same error ' could not initialize disc burning engine'.
2. I am not able to burn to a folder. It acts like it will do it, but then it justs sits on 0% and does nothing.
3. I have defragmented, cleaned-up, run antivirus, etc and still have the same problems.
I have gone through your faqs on optimizing vista, maintaining computer for best performance, etc and I'm still having this (and other problems - like the one you were previously helping me with - can't add titles without the program crashing).
The computer is an HP DV2500 with 2.0 Ghz centrino duo and 2.0 Gb RAM and 160 Gb hard drive. I've update my graphics card driver and checked for updates to the DVD burner. 20 Gb is free on the hard drive and I get these same errors for any size (even 10 second) project that I'm working on.
Is there any other further advice that you might be able to give me?
Thanks,
Erik

Mplayer doesn't play .avi[SOLVED]

Hello. XBMC and MPlayer doesn't play .avi movies. I have the latest updates and are using mplayer 30325-1 from extra and XBMC xbmc 9.11-8 from community. Anyone else having the same problem?
Last edited by jai134 (2010-02-05 12:47:25)

this is the end of xbmc crashlog:
11:30:41 T:2936028016 M:3260551168 NOTICE: (VDPAU) Didnt find a Video Surface Available (Total: 0). Creating a new one. TRY #1
11:30:41 T:2936028016 M:3260297216 NOTICE: (VDPAU) FiniVDPAUOutput
11:30:41 T:2936028016 M:3260297216 NOTICE: (VDPAU) screenWidth:1360 vidWidth:480
11:30:41 T:2936028016 M:3260297216 NOTICE: (VDPAU) screenHeight:768 vidHeight:270
11:30:41 T:2936028016 M:3259490304 NOTICE: (VDPAU) Total Output Surfaces Available: 4 of a max (tmp: 4 const: 4)
11:30:41 T:2936028016 M:3259490304 NOTICE: VDPAU Decoder capabilities:
11:30:41 T:2936028016 M:3259490304 NOTICE: name level macbs width height
11:30:41 T:2936028016 M:3259490304 NOTICE: ------------------------------------
11:30:41 T:2936028016 M:3259490304 NOTICE: MPEG1 0 8192 2048 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: MPEG2_SIMPLE 3 8192 2048 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: MPEG2_MAIN 3 8192 2048 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: H264_MAIN 41 8190 2032 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: H264_HIGH 41 8190 2032 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: VC1_SIMPLE 1 8190 2048 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: VC1_MAIN 2 8190 2048 2048
11:30:41 T:2936028016 M:3259490304 NOTICE: VC1_ADVANCED 4 8190 2048 2048
11:30:41 T:2936028016 M:3259490304 ERROR: (VDPAU) Error: An invalid handle value was provided.(3) at VDPAU.cpp:1115
11:30:41 T:2936028016 M:3259490304 WARNING: Decode - avcodec_decode_video didn't consume the full packet. size: 1696, consumed: 59
############### END LOG FILE ################
############ END XBMC CRASH LOG #############
and this is MPlayer output:
[jan@zotac The Fifth Element (1997)]$ mplayer The\ Fifth\ Element\ $1997$\ Bruce\ Willis\ $Optional\ MULTISUBS$_Kuth.avi
MPlayer SVN-r30325-4.4.2 (C) 2000-2009 MPlayer Team
142 audio & 332 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing The Fifth Element (1997) Bruce Willis (Optional MULTISUBS)_Kuth.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [XVID] 704x288 12bpp 25.000 fps 665.5 kbps (81.2 kbyte/s)
Clip info:
Software: FairUse Wizard - http://fairusewizard.com
==========================================================================
Forced video codec: ffh264vdpau
Forced video codec: ffmpeg12vdpau
Cannot find codec matching selected -vo and video format 0x44495658.
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [ffmp3] afm: ffmpeg (FFmpeg MPEG layer-3 audio)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 19.1 (19.1) of 45301.6 (12:35:01.5) 2.5%
Exiting... (Quit)
I have search with this line starting "Cannot findcodec matching...."

Could not initialize AM in shared library

Hello, I have some problem.
I deployed adf-library as a shared library on weblogic. This library is a real application packed in jar, and then in war as is described here http://andrejusb.blogspot.com/2010/07/deploying-adf-applications-as-shared.html The problem is that when I call taskFlow in this library from another application, I get an exception: libraries application module could not be initialized:
oracle.jbo.JboException: JBO-29000: java.lang.NoClassDefFoundError, Could not initialize class com.rstyle.rtn.model.module.CompanyAMImpl
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:609)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2324)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2204)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3088)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:460)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class com.rstyle.rtn.model.module.CompanyAMImpl
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
I’ll be very grateful for any idea about what is wrong and how to fix this.

codeplay, thanks for your reply, but it doesn’t help, classpath doesn’t contain my adf-lib jar, but it also hasn’t another jars which works correctly. May be it is because wls-cat works incorrect on 11.1.1.2.0 version, because it is for 11.1.1.4.0. There is this jar into application temp directory on weblogic.
I thought that my AMImpl can’t be initialized because there can’t be find something imported in it. But I’ve checked all dependencies and all seems correct. I also tried to use “prefer-web-inf-classes” property but no result.
h0s, I added reference to my library in the weblogic.xml. I think the problem is not because my library is “shared”, if I add jar to project as a common adf-library there is the same result.

Could not initialize the application's security ... Tried renaming cert8.db and secmod.db. Profile has r/w access. Still get message. Can only run as admin

Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
Above error messa4bite occurs whenever I star Firefox without admin priv. Checked the profile directory listed in troubleshoot info -- has r/w access for system, admin and self Tried renaming cert8 and secmod as suggested in one forum response. Problem persists.\
My computer runs Win 7 Home Premium 64bit

If deleting or otherwise removing the cert8.db and secmod.db file doesn't help then try a new profile.
*https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

"Could not initialize the application's security component" already erased mozilla directory containing profiles and the other in x86, problem persists!

This has just happened. But I have erased the mozilla directories containing the profiles and as well the both mozilla directories in program files x86. Yet when Firefoz is reinstalled, problem recurs.
Receive again the message "Could not initialize the application security component."
Have looked at the fixes available. Those appear not to work.
Anyone else with ideas? Maybe some hidden files that I can search for on my computer, and erase?
I'm suspecting I need really a thorough erase of anything connected with Firefox, to solve this issues. Thought though I had found everything.
Not relishing the prospect of erasing the hard-disc to fix this, though that has 100% probability of working.
My computer is running Wista 64.

Rename secmod.db (secmod.db.old) in the Firefox Profile Folder in case there is a problem with the file.
Firefox will create new files.
* https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Firefox Error with Roaming Profiles "Could not initialize the application's security component"

Hi there
I get the common error "Could not initialize the application's security component" when I startup Firefox.
I tried this manual: http://support.mozilla.org/en-US/kb/couldnt-initialize-applications-security-component
I have enough space left, i have read/edit/write-rights, created a new firefox profile and also reset all the settings, nothing works.
BUT I dont have a cert8.db File in my %APPDATA%\Mozilla\Firefox\Profiles
What can I do?
Like I said in my description, its about Users that are logged in with a Roaming-Profile. Every User has this problems, it doesn't matter if or without Admin-Rights.
Also this problem exists since Firefox 4.0.0, the last working Version was 3.6.13 I guess.

You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
Try to remove or rename secmod.db (secmod.db.old) in the Firefox profile folder.
If that didn't help then also rename the cert8.db file to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.<br />
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.<br />
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 25: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Please help: My iPOD just runs through the playlist. Doesn't play anything.

My iPOD just runs through the playlist. Doesn't play anything. The songs do exist physically on the device.
I tried updating the iPOD but still the problem was not solved.
Is there any way by which I can play the songs without downloading them again on iPOD?
Windows XP Pro

I just had the same exact problem. It's like the Nano was forwarding thru the songs by itself..nothing would play!
So I went and looked at the manual, which suggested I try resetting it first. I did, and it worked! Here's what I did:
The manual instructed me to turn the "hold" switch on & off. Then it said to hold down the Menu and center button at the same time, until the Apple logo appeared. Then in a few moments the main screen came back on...and I was able to play songs again.
Hope this works for you, good luck!
Dell 2400 Windows XP

Could not initialize class sun.awt.X11.XToolkit

hi all
String fileName = "c:/test/one.jpg";
Image imgg = Toolkit.getDefaultToolkit().getImage(fileName);
ImageIcon img = new ImageIcon(imgg);
imgDim = ""+img.getIconHeight();
when i run this code in linux machine am getting the error Could not initialize class sun.awt.X11.XToolkit....but its runnig on windows machine.. is there anything wrong wiht my code........pl help me any1 out of dis

here http://rapid-i.com/rapidforum/index.php?topic=366.0
they talk about adding to the JVM options a "-Djava.awt.headless=true"

Could not initialize LDAP cache

Hi,
We are using the iplanet application server version 6.5 with iplanet directory server version 5.0 .
We are facing the problem in the restart of application server since we have deployed an application. Here is some log on the same. Any help or advise is appreciated.
When application server is running, we are finding it impossible to stop by using 'iascontrol stop' command. We are forced to use the command 'iascontrol kill'. Once it is stopped, when we try to start it, it gives the following messages in KJS logs.
Connected to LDAP server on egovdevsrvr2.dubai-e.gov.ae port 389
iPlanet Application Server is running in international mode
Initializing LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389
Could not initialize LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389: Success
On the kas log it gives the following.
[16/May/2003 20:04:21:5] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
[16/May/2003 20:05:17:6] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
[16/May/2003 20:06:13:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''2'' (CCS0)
[16/May/2003 20:06:13:8] info: ADMIN-030: kas> listening for connections..
I am sure LDAP is running already.
Now if I test any sample applications, likfe fortune and Hello World, they work fine. But a particular application fails with the following message at the KJS logs.
ava.lang.IllegalStateException: internal assert: Why is the servlet GDS key for: {03c1437d-f21a-1c38-941e-0003ba084dc6
} = null?
at com.kivasoft.util.Debug.assert(Unknown Source)
at com.netscape.server.deployment.WebAppCompGDSUtil.getServletFromGDS(Unknown Source)
at com.netscape.server.deployment.DescriptorManager.getServletByGuidStr(Unknown Source)
at com.netscape.server.deployment.WebAppDescriptor.getServletFromGDSorCache(Unknown Source)
at com.netscape.server.deployment.WebAppDescriptor.getServlet(Unknown Source)
at com.netscape.server.deployment.WebAppDescriptor.getAllServlets(Unknown Source)
at com.netscape.server.servlet.servletrunner.AppInfo.resetServlets(Unknown Source)
at com.netscape.server.servlet.servletrunner.AppInfo.<init>(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletModule.getAppInfo(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.getAppInfo(Unknown Source)
at com.netscape.server.servlet.servletrunner.StaticServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
What is this cache initialization that happens at the startup of ias? Is it anything related to server settings? I remember, some times when the ias starts with a successful cache initialization message, I find this application to be working fine.
Please help.

Hi,
We are using the iplanet application server version 6.5 with iplanet directory server version 5.0 .
We are facing the problem in the restart of application server since we have deployed an application. Here is some log on the same. Any help or advise is appreciated.
When application server is running, we are finding it impossible to stop by using 'iascontrol stop' command. We are forced to use the command 'iascontrol kill'. Once it is stopped, when we try to start it, it gives the following messages in KJS logs.
Connected to LDAP server on egovdevsrvr2.dubai-e.gov.ae port 389
iPlanet Application Server is running in international mode
Initializing LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389
Could not initialize LDAP cache from server egovdevsrvr2.dubai-e.gov.ae port 389: Success
On the kas log it gives the following.
[16/May/2003 20:04:21:5] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
[16/May/2003 20:05:17:6] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
[16/May/2003 20:06:13:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''2'' (CCS0)
[16/May/2003 20:06:13:8] info: ADMIN-030: kas> listening for connections..
I am sure LDAP is running already.
Now if I test any sample applications, likfe fortune and Hello World, they work fine. But a particular application fails with the following message at the KJS logs.
ava.lang.IllegalStateException: internal assert: Why is the servlet GDS key for: {03c1437d-f21a-1c38-941e-0003ba084dc6
} = null?
at com.kivasoft.util.Debug.assert(Unknown Source)
at com.netscape.server.deployment.WebAppCompGDSUtil.getServletFromGDS(Unknown Source)
at com.netscape.server.deployment.DescriptorManager.getServletByGuidStr(Unknown Source)
at com.netscape.server.deployment.WebAppDescriptor.getServletFromGDSorCache(Unknown Source)
at com.netscape.server.deployment.WebAppDescriptor.getServlet(Unknown Source)
at com.netscape.server.deployment.WebAppDescriptor.getAllServlets(Unknown Source)
at com.netscape.server.servlet.servletrunner.AppInfo.resetServlets(Unknown Source)
at com.netscape.server.servlet.servletrunner.AppInfo.<init>(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletModule.getAppInfo(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.getAppInfo(Unknown Source)
at com.netscape.server.servlet.servletrunner.StaticServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
What is this cache initialization that happens at the startup of ias? Is it anything related to server settings? I remember, some times when the ias starts with a successful cache initialization message, I find this application to be working fine.
Please help.

Could not initialize class coldfusion.runtime.report.Report

I have inherited an application that contains a number of
reports. This application was developed on our CF7 server, and when
we upgraded, the application was copied to 8, but not fully tested.
Now, when we request the reports, we get the following errors (this
is a Flex application):
(mx.rpc::Fault)#0
errorID = 0
faultCode = "Server.Processing"
faultDetail = (null)
faultString = "Could not initialize class
coldfusion.runtime.report.Report"
message = "faultCode:Server.Processing faultString:'Could
not initialize class coldfusion.runtime.report.Report'
faultDetail:'null'"
name = "Error"
rootCause = (null)
My searching for a solution has not been successful on
Google. Has anyone experienced this error and been able to fix it?
I'm at a loss on what to do next, and as the app is in production,
I have some upset clients over this.
Thanks!!
Jenn

I can't find anything further on this error after much
research. I'm getting the problem when I try to run any report on a
live web server (hosted site), even though it runs fine in the
development environment. My hosting company could only suggest that
the problem could lie with the fact they have RDS disabled;
however, although the Report Builder requires RDS, running uploaded
.cfr reports from the cfreport tag shouldn't. If anyone solves this
I'd be most grateful for the information to be posted.

RDS server message: could not initialize class com.adobe.rds.core.services.Messages

I just moved to a new host with my own dedicated cloud server. Using CF9. Everything seems to be working fine with the server, but i get the following error when connecting to it via RDS through CF Builder 2.
RDS server message: could not initialize class com.adobe.rds.core.services.Messages
I get it when i first connect to the server, then if i try to access it again, it will let me in. I also get an error when i try to open the first file. Then its ok.
I have no idea what it can be, i have not run into this on any other server that I have connected to.

Hello,
After 2 months of it not working for love or money. I got a new machine and ColdFusion Builder 2 and started over. It worked for a while. Then when the trial version timed out a few days ago it killed it again. With the same error. So it is definitely something that gets “switched” within the code or configuration settings. Rebooting about 3x seemed to fix it this time after entering the license number.
Yes to answer your questions below. Yes, I did all those things below. Re-checked and checked numerous times. Keep in mind the installation there worked for over a year then all of a sudden stopped. I hadn’t changed anything at all. And it just stopped dead, started throwing up that error.
I asked all the experts in my office. One guy knows CF and Java inside and out and could not figure it out. I searched the web and the issue is listed many times but with no real answers.
Thanks for getting back to me. I am up and running with new machine. But since I’ve seen the error on this machine now, I live in fear it will reappear and stop working. So if you come up with any thoughts I would appreciate it.
Thanks,
-Lyle

SEVERE: UTIL6034:Could not initialize ORB monitoring

Hello,
What is this error/warning? I keep getting this as a "SEVERE" warning. But doesn't cause any real harm. My programs work This happens on the stand alone client JVM accessing a server. I see that some one else had reported the same problem way back in October. Happens when a client calls a "new InitialContext()"
Thanks
Feb 20, 2003 2:32:23 PM com.sun.enterprise.util.ORBManager initializeORBMonitori
ng
SEVERE: UTIL6034:Could not initialize ORB monitoring
java.lang.IllegalStateException: Monitorable component can not be registered because admin service has not been initialized.
at com.iplanet.ias.admin.monitor.MonitoringHelper.registerORBMonitoringMBean(MonitoringHelper.java:305)
at com.iplanet.ias.admin.monitor.MonitoringHelper.registerSystemORBMonitoringMBean(MonitoringHelper.java:252)
at com.sun.enterprise.util.ORBManager.initializeORBMonitoring(ORBManager.java:732)
at com.sun.enterprise.util.ORBManager.init(ORBManager.java:261)
at com.sun.enterprise.naming.SerialInitContextFactory.<init>(SerialInitContextFactory.java:31)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:649)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:175)
at com.manu.webservices.sunone.security.SunOneSecurityUtils.getServerContext(SunOneSecurityUtils.java:162)
at com.manu.webservices.common.NamingContext.createContext(NamingContext.java:272)
at com.manu.webservices.common.NamingContext.<init>(NamingContext.java:186)
at com.manu.webservices.dataimport.Parser.initialize(Parser.java:428)
at com.manu.webservices.dataimport.Parser.main(Parser.java:116)

Are you use Windows?
I get the same error when I run my application on Windows.
It seens harmless. I posted this error, but no one cares.
But, when I run my application on Solaris, there is no such error. But with deadly error:
"Thread-6" java.lang.UnsatisfiedLinkError: no cis in java.library.path<<I posted solaris error, not one cares.

" Could not initialize Photoshop Elements because... "

Hi Everyone,
So, I have this problem with my Adobe Photoshop Elements 5.0. Everytime I try to open the program itself I get the following message...
"Could not initialize Photoshop Elements beacuse the file is locked. Use the 'Properties' command in the Windows Explorer to unlock the file."
I have read many threads on this problem, and have tried it all... I might have missed something but I don't think I did..
I didn't try to do anything with the program, just one day it wouldn't work...
If you have any ideas Please let me know !
Thank you,
3mm@Lue

http://www.unis.no/50_INTERNAL/5020_It_Info/documents/solved_problems/photoshop_elements_s tartup/PhotoShopElements.htm
Photoshop Elements does not start
Some of you have reported a problem when starting Photoshop Elements:
"Could not initialize Photoshop Elements because the file is locked.
Use the 'Properties' command in the Windows Explorer to unlock the file."
SOLUTION:
Sometimes Photoshop Elements may start acting strange and may start to cause problems that weren't there before, or Photoshop Elements might become corrupt. One simple fix to a variety of problems is to delete the settings file and have Photoshop create a brand new one during next startup.
To do this hold down the following keys while the program starts:
Ctrl+Shift+Alt
You should be prompted with a dialog box that says:
"Delete the Adobe settings file?"
Click ok and the program will continue to start.
If you don't get the dialog box asking if you wish to delete the settings file, then you didn't hold down the key command early enough. Close Photoshop and try again.
IT
UNIS

Could not initialize photoshop because of a problem using the adobe color engine (Win 7)

Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors. Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors. If I disable 4 of the monitors CS5 starts normally. I do not have to remove the added graphics card. When I extend the desktop again to all 8 monitors I get the error above.
How do I trouble-shoot the problem? Is it Photoshop, NIVDIA or Windows 7?

Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
Since you are using two identical cards, this could do the trick.
Caveats - Make sure you:
1. Select Custom Install, the Express Install will most likely not work properly.
2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
screw up your speech recognition (if you use it) or other audio software - it did for me.
3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
and several other driver related files will not be overwritten, causing all sorts of neat effects.
4. After the Install is complete, reboot your system whether the Installer prompts you or not.
After testing various configurations, disabling two - six of my eight monitors I am at this point:
I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards. I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
On an interesting side note:
After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
Other than Adobe Software, I've had only one other issue with my setup:
When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
PS:
Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
I use the free version, it allows you to do cool things like have individual wallpapers for all
your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
you can also add individually customizable taskbars to each monitor, and a lot more.
http://www.displayfusion.com/

Mplayer doesn't play anything, could not initialize video filters

Similar Messages

Maybe you are looking for