MQAdapters Not able to push or pull message from Bpel

Hi All,
Presently i am working on a Bpel Module which is receiving a jms message and has to push them onto an IBM message Queue. Under the flow I am receiving the error as given,please suggest some solution.
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding:
"JCA Binding execute of Reference operation 'Enqueue' failed due to:
JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
GetApprovedSupplierDetails_IMR:SAPPIMQRequest [ Enqueue_ptt::Enqueue(body) ] :
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue:
BINDING.JCA-00001 java.util.MissingResourceException java.util.MissingResourceException
java.util.MissingResourceException java.util.MissingResourceException
Please make sure that the JCA connection factory and any dependent connection factories
have been configured with a sufficient limit for max connections.
Please also make sure that the physical connection to the backend EIS is available and the backend itself
is accepting connections. ". The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution

Thanks for the reply though JMS is not being used out here .
I am configuring IBM MQ and trying to push messages inside those queues. Both SOA11g and IBM Websphere are installed in my machine and the BPEL 11g just wants to trigger the event to store the message inside the Queue.
Earlier on i was not able to send across the message to queue and presently i am stuck up with this error.

Similar Messages

  • Not able to display javascript alert message from within a pl/sql block

    Hello,
    Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
    begin
    if :P1_ITEM IS NOT NULL then
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
    HTP.p ('</script>');
    end if;
    end;
    and I have made this code to be executed conditionally when request = Expression1
    Expression1: SUBMIT
    The thing is I am not able to display an alert message when the update button is clicked.
    Can anyone please help me with this one.
    Thanks,
    Orton

    varad but I also have an update statement within that block for the update button something like this i want to achieve.
    begin
    if :P1_ITEM IS NULL THEN
    update sample_tbl
    set col1 =:APP_USER,
    col2 = 'Y'
    where pk_col = ---;
    commit;
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Successfully assigned an item!'');');
    HTP.p ('</script>');
    end if;
    if :P1_ITEM IS NOT NULL then
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
    HTP.p ('</script>');
    end if;
    end;
    thanks,
    Orton

  • Why am I not able to download all the messages from the email server, only few are downloaded, the rest are not? Things were fine until last week.

    I've tried all the suggestions including deleting the inbox.msf etc. I have also tried uninstalling and reinstalling Thunderbird, but none of them seem to work.

    Is it hanging on the same message each time? If so go to your email providers web mail site and log into your account there. Read and delete the problem message and see if the remaining messages download.

  • Hi,  Trying to log in with my user id and password at iocbc but was not able to access. Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting  Anyone can advise? or i need to download?

    Hi,
    i have the same problem?
    Trying to log in with my user id and password at iocbc but was not able to access.
    Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
    Anyone can advise?

    You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.

  • I am not able to sign into i message, it keeps giving me a message "could not sign in. Please check your network connection and try again" Please help!!

    i am not able to sign into i message, it keeps giving me a message "could not sign in. Please check your network connection and try again" Please help!!

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • Upgrading my Iphone 4 I am not able to access my text messages or send texts.

    Hi Everyone:
    Since the last 9 days after upgrading my Iphone 4 I am not able to access my text messages or send texts.  I have attempted to delete the "68" messages however, once deleted for a period 2-3 seconds.  The deleted messages reappears!  I have reset. restored. did back-ups!  Nothing has altered this problem. Has anyone else experienced this?  Please help?  Thanks :-)

    Thanks Diesel: 
    But I have been back and forth with my carrier and they are adament that this is not their issue but Apple's..... I do appreciate your reply!

  • HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

    I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

    If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it.  Also, try changing the password associated with the Apple ID that you were using for iMessage.

  • Why I am not able to copy and paste photos from my desktop to my Itouch?

    I am not able to copy and paste photos from my computer to my Itouch. I use to be able to do it. Now there is an error message that says my device is wither disconnected or stopped responding.
    But when I plugged in the Itouch, it still shows on my computer, still able to see my existing pictures in it. Just not able to paste/drag any new pictures into the folder.
    Anyone has this problem and able to solve it?
    Thank you.

    Hi BobRz
    Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

  • Sender File Adapter  not able to get file via FTP from an external system

    Hi,
    I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml".  The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
    The connect mode is Permanently and the transfer mode is Binary.
    Can you help me?
    Thanks.
    T.

    Hi Teresa,
    does this case appears with a file size higher the others?
    Personally, I do not recommend to have a polling under 1min.
    10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
    If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
    regards.
    mickael

  • Photos app in my mac is not able to open the iPhoto library from my external hard disk.

    I am using iMac (21.5-inch, Late 2013) OS 10.10.3. i have 2 iPhoto library one on my Mac HD and the other on my External HD which i primarily use and which has all the latest photos in it. Now with the new update to photos app in Mac i am not able to open the iPhoto library from my external HD. I get the following error message please help.  

    i am not able to open the iPhoto library from my external HD
    How is the external HD formatted? Is the filesystem MAcOS Extended (Journaled) as necessary?
    Is theHD directly connected or by a networked connection?
    Have you tried to set the "Ignore Ownership on this volume" flag?
    See how to prepare the drive for storing an iPhoto Library on it in this document: iPhoto: Sharing libraries among multiple users
    Which version of iPhoto created the library? If it was iPhoto 7.1.2 or earlier, download and run the iPhoto Library upgrader.
    iPhoto '11 or later: About the Library Upgrader - Apple Support

  • Pulling message from JMS queue

    Hi,
    I'm looking to pull messages from a JMS queue and have tried setting up a Business Service that doesn't send a request but only expects a response. Doesn't seem to work, I'm unable to pull messages from a queue (I don't want to set up a Proxy Service that listens) - is there a standard way of doing this in ALSB?
    Thanks.

    This is not a supported feature. The best solution is to write a java callout to pull the message from the queue.
    Gregory Haardt
    ALSB Prg. Manager
    [email protected]
    Edited by ghaardt at 09/11/2007 4:00 PM

  • Not able to login to this forum from opera in xfce4 in arch[SOLVED]

    I installed xfce4 and opera and they are working well. However, I am not able to login to this forum from there. The login page is loaded, I enter the login and password, login accepted message comes but when the page is reloaded, I am still not logged in and I cannot post to the forum. I am writing this from my previous distro + firefox.
    Last edited by rnarch (2012-03-21 17:34:42)

    rnarch wrote:I am writing this from my previous distro + firefox.
    Have you tried Firefox in Arch? If that works, then there's something wrong with the settings in Opera (maybe it's showing a cached page).

  • HT5887 I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

    I am not able to transfer files on airdrop from phone to another. Whereas I can receive files from the other phone. Both devices are iPhone 5.

    I have tried all sorts of Settings but just doesnt seem to work one way. I keep getting messages "Airdrop cancelled".

  • Not able to read the wsdl file from server Premature EOF encounter

    Hi All,
    I am facing issue while accessing a web Service from server. Here is the clear view about it.
    I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
    Now here i am facing peculiar behavior which i am not able to trace it out.
    1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
    2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
    3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
    I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
    I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
    Can someone please help in resolving the issue.
    I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
    Many thanks.
    Tarak
    Edited by: user11896572 on Jan 17, 2012 5:22 PM

    Hi,
    Setting default from the jdeveloper -
    During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
    Setting default from the em console -
    After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
    Refer -
    http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
    8.2 Managing the State of Deployed SOA Composite Applications
    Thanks

  • TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

    I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

    Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on.  Then see if you can access Settings.

Maybe you are looking for