MRP run: how to check the target quantity of Schedule Aggreement

Hello Gurus,
We have a requirement when running MRP, creating schedule lines automatically in Schedule Aggreement.
Currently, the MRP did NOT check the target quantity of Schedule Aggreement. But we need to check this, to make sure the schedule line quantity will not exceed the target quantity.
I check some note and the solution is use quota arrangement. but quota can be limit the maximum quantity per vendor, not per S.A.
Is there any way to fullfill this requirement?
Configuration?
Or any BAID/enhancement can be implemented?
Or where to do the modification?
Please advise, Thanks a lot!
Regards,
Charlie

Hi Charlie
This is the standard behavior: MRP does not check the target quantity.
If you want to develop your own code to do that, the only option that I see is MD_MODIFY_SOURCE. This BAdI allows you to define your own logic for the source determination during the MRP run.
Take a look on the following document for the most common BAdIs on MRP:
BAdIs for MRP
BR
Caetano

Similar Messages

How to get the Deliver Quantity against Schedule Line Quantity

Hi,
I have specific requirement for a report where we need to determine the delivery qty against the schedule line qty for a sales order. In sales order in schedule line tab system shows the delivery qty. The field is VBEPD-VSMNG. VBEPD is a structure and I could not find the table in which this is actually stored. Does anybody know how to get the delivery qty for schedule line?

Hi,
U can check the following tables:
VBEP (Sales ScheduleLines) VBEP-VBELN =VBAP-VBELN and VBAP-POSNR = VBEP-POSNR
LIPS (SalesDoc:Delivery Items) LIPS-VGBEL =VBAP-VBELN and LIPS-VGPOS =
VBAP-POSNR
VBEH (Schedule LineHistory) VBELN POSNR ETENR
Regards
Kannaiah

Reg- How to Check pending dispatch quantity for an order?

HI,
Pls guide me how to check the pending quantity to be dispatched for an order.
I Have explained herewith my requirement. A sales order is created for 10 quantities, out of which 6 are delivered. What is the path to check the balance 4 quantities. Also pls tell me the table in which, it gets recorded. I checked in VL04, but pending quantities were not displayed.
Thanks in advance
Sivarajesh. J

Hi siva
I can suggest an alternative,
u can get values of delivered qty from table RV45A-VSMNG.
ANd deduct it from Target Qty VBAP-KWMENG to get pending dispatch qty.
u can get this in Order transaction at schedule line level.
Kind regards
Mandar

How to restrict the delivery quantity not more than target quantity?

Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
David

Dear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David

Help! how to check the SQL run in Oracle?

Hi all,
I have a problem. the developer said the SQL written in Java code are not the one executed in Oracle DB. that mean the query is some how manipulated by some PL/SQL so the final query run in Oracle is different. So can someone teach me how to check the actual SQL run in Oracle?
Thanks a lot.
Regards,
Jason

Hi Michel Thanks. But it looks like the query stored in v$sqlarea is not the final executable SQL. for example, the code in application is "select column_A from default_table where column_A = ?" and this ? will be given some value in run time. the query stored in v$sqlarea will be like "select column_A from default_table where column_A = :1"... what is this :1?
Also if some PL/SQL procedure appends some condition to the SQL, is it possible to view the full query from database side?
ok, let me try trace and tkprof first.

How to Check the report is Finished while calling a report from Forms 6i

Dear All,
I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"
I need to copy the pdf to store it in another place once the report is generated.
My Problem is : that i want ot Check first the report has generated after " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" is executed ? How to check the report is generated ot not?
As i tried to use the below procedure after "Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"" but his does not work... nothing happens
{code}
PROCEDURE FPC_COPY_REPORT (p_report_name varchar2) IS
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     rep_status varchar2(20);
     lv_id varchar2(1000);
BEGIN
repid := find_report_object('AMTP_995.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
     if rep_status = 'FINISHED' then
     message('Report Completed'); message('Report Completed');
     else
          message('Error when running report.');           message('Error when running report.');
     end if;
END;
{code}
Any Help

actually My code is this:
declare
     ln_alert          number;
     pl_id               ParamList;
     lv_report_name varchar2(10000);
     lv_path varchar2 (100) := 'C:\';
     lv_shared_path varchar2(1000);
     lv_copy_file varchar2(10000);
cursor cr_dir_path IS
select v_dir_path
from md_directory
where v_dir_code ='SHR';
lv_file_name varchar2(1000);
BEGIN
open cr_dir_path;
fetch cr_dir_path into lv_shared_path;
close cr_dir_path;
lv_report_name := lv_path||:fn_cntl.nb_ref_no||'_M08600000_'||to_char(sysdate,'YYYYMMDD-HHmmss')||'.pdf';
if ffn_check_fields THEN
     pl_id := Get_Parameter_List('LAI');
         IF NOT Id_Null(pl_id) THEN
             Destroy_Parameter_List( pl_id );
          END IF;
          pl_id := Create_Parameter_List('LAI');
       if :fn_cntl.nb_report_name ='MMAT_REPORT'
            then
                 if :fn_cntl.nb_report_desc ='EXPORT'
                      then
                     Add_Parameter(pl_id, 'PARAMFORM',TEXT_PARAMETER, 'NO');
         Add_Parameter(pl_id, 'DESTYPE', TEXT_PARAMETER,'File');
        Add_Parameter(pl_id, 'DESNAME', TEXT_PARAMETER, lv_report_name);
        Add_Parameter(pl_id, 'DESFORMAT',TEXT_PARAMETER,'PDF');
        Add_Parameter(pl_id, 'p_mat_no',TEXT_PARAMETER, :fn_cntl.nb_mat_no);
        Add_Parameter(pl_id, 'p_ref_no',     TEXT_PARAMETER, :fn_cntl.nb_ref_no);
        Add_Parameter(pl_id, 'p_verified_by',TEXT_PARAMETER, user);
                 Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);
      DECLARE
           repid REPORT_OBJECT;     v_rep VARCHAR2(100);     rep_status varchar2(20);BEGIN
                     /* REP_OBJ= REPORT OBJECT CREATED UNDER REPORT NODE AT FORM */
         repid := find_report_object('MMAT_REPORT');      v_rep := RUN_REPORT_OBJECT(repid);
                    rep_status := REPORT_OBJECT_STATUS(v_rep);
      if rep_status = 'FINISHED' then
          message('Report Completed');          message('Report Completed');
         --copy_report_object_output(v_rep,'c:\local.pdf');
         -- host('netscape c:\tlocal.pdf');
     else          message('Error when running report.');
                                      message('Error when running report.');
     end if;
             END;
     end if;
end if;
       if :fn_cntl.nb_report_desc ='EXPORT'
            then
              error_handler('This report will be Storde in ' ||lv_report_name||' and '||lv_shared_path|| ' Location',3);
                 lv_copy_file :='copy '||' "'||lv_report_name||'" "'||lv_shared_path||'"';
                 host(lv_copy_file,no_screen);
              error_handler('Report Has been Generated Sucessfully.',3);
       end if;
    end if;
END;I will try first the another solution you have replied perviously... and will let you no the results... thanks a lot...

How to specify the target name while deploying a code in OSB-- Plz Help

Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
Prabhu

Hi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj

How to check the JDK version of a compiled java file

can anybody tell me how to check the JDK version of a compiled java file ?
Edited by: gbhatia8 on Sep 9, 2010 7:04 AM

The major/minor version of the class file is the way to go.
Also, it's not necessary to write a separate program to get to those. javap prints them out when being passed the -v flag.
Note, however that "JDK version" is not a correct term, as I can create 1.4-compatible class files with a Java 6 JDK (by passing the -target flag to javac). Those won't look any different than .class files written with a 1.4 JDK.

PR and RFQ usage upto the target quantity

Hi,
How to restrict the PR and RFQ up to the target quantity as a reference. The PR and RFQ should not be available, after the target quantity as a reference.
Thanks in advance
Vikram

Hi,
Do you meant to say making the PO with referance to PR,and the qty should not exceed the PR qty, then you have to make as Error for message 06076 in SPRO-MM-Purchasing-Environment-systemmessages.
if this is not you are looking for please let me know.
Reward if usefull.
Regards,
Batchu.

How to check the material consumption using tables

Hi,
I would like to know how to generate or view the material consumption at table level. Can anyone please specify the transactions codes and tables names how to check the consumption of material. I also like to know how to analysis the consumption of material between components and finished material. Please provide me the step by step wise how to do.Thanking you
Regards,
Sivaji Kumar Madhu Kiran

You can calculate material consumption in table MSEG. you will need to segregate the material documents based on movement types and then add or reduce the quantities of each material document. for example a material document with movement 101, add the quantity for the material, and when there is a issue material document like 201 or 221 reduce the quantity from the material stock.

Sap isu-cic(how to check the output)

HI to all......
In isu-cic how to check the output,i have done all the assign ments like framewrk creation etc...i defined the organizational structure with assign hoder...after that wats the next steps?
can anybody plz reply....
Cheers..
sateesh

Hello satish
Step 1:
Create Framework Id( assign hidden & visible components)
Step 2: Create CIC profile
Step 3: create Org unit and assign person
Step 4: Assign CIC profile to Org. unit (or) person
Path : Easy access screen
Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
In this screen on the top i.e menu bar find Go To
Go To>detail Object>Enchanced object description
Now u r in Maintain object page(T code-PP01)
Now in the Active tab page select CIC profile
Now in menu bar Edit>create infotype
Again u r in new page(T code-PP01)
Enter the CIC profile Id which u have created in customizing
Run T code- CIC0
I hope u r able to see the screen now
Rgds
Madhusudhan

How to check the dependency of Timesten Application version 11.2.1 for OEL 6U4

How to check the dependency of Timesten Application version 11.2.1 for OEL 6U4

Hi Chris,
THank for your reply.. My requirement is I am planning to upgrade my Server OS from OEL 5U8/5U3 servers to OEL 6U4. And we are using timesten application 11.2.1 version as of now. So wanted to check if the same version of TImesten can we install them on OEL 6U4 . if we can install it successfully what are the dependent RPM packages we need to consider for installing the timesten application and will there be any issues using the application? .
Is timesten 11.2.2 is the officially supported and stable version on OEL6U4?
And also can you suggest me if I want to check other applications dependency like rhino-2.3 and postgres 8.1.23 version how I need to check if this applications versions are certified to run on OEL 6U4.
IT would be great help if you can suggest me on this.
Naveen

How to check the Idocs sent from SAP system

How to check the outbound Idocs sent from SAP system to target systems.
How to know the message types and target systems.

Hi,
In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS. Depending on different status you can differentiate them as Inbound or Outbound Idocs...
Cheers...
Santosh.
<i><b>Mark All Usefull Answers...</b></i>

How to check the BW and BIA systems are up and working fine.

Hi friends,
how to check the BW and BIA systems are up and working fine. And also what is ICM, how to check whether it is working properly or not.
ANd what is name resolution and IP , how to check whether this is running fine.
regards, balu.

Hi,
you can use process monitoring or the alert function in the standalone TREXAdmin tool.
ICM:
http://help.sap.com/saphelp_nw04/helpdata/EN/0a/a7903febb15a7be10000000a11405a/content.htm
name resolution
http://en.wikipedia.org/wiki/Domain_Name_System
IP:
http://en.wikipedia.org/wiki/IP
Please also have a look at the transactions TREXADMIN and RSDDBIAMON2.
I think it´s better if you use the forum search and google/wikipedia before you ask such questions.
Best Regards,
Jens

How to check the timeshot of iProcurement approval request notification?

Dear all:
As the subject, how to check the timeshot of every iProcurement approval notification ? Can someone provide the SQL to check?
Environment: Oracle R12.1.3 | Aix 6.1
Regards
Terry Chen

The delay could be because
1) The Workflow Background process in Oracle was down or because it is scheduled to run every 1 hour or so.
2) The workflow notification process that sends the email notification out was down.
3) If the example you gave is an actual example, the difference is exactly 1 hour. That is too much of a coincidence. In that case, the email got sent out right away. It just appears to be one hour late due to timezone difference.
Hope this answers your question,
Sandeep Gandhi
Edit: Third point above is not valid. I just noticed the difference is 25 hours. Looks like your mail server or Outlook was down.
Edited by: Sandeep Gandhi, Independent Consultant on Mar 25, 2011 7:27 AM

MRP run: how to check the target quantity of Schedule Aggreement

Similar Messages

Maybe you are looking for