MS Office report for servo motion controller

Dear all,
Good day,
My application is servo motion controller where I will choose profile from tab deliminated text file.
Attached VI working fine and I would like to add more features like MS office report where report will be generate after completion of all cycles automatically with data points and graphs. For that I am not sure where to add this function "MS Office report".
Please help me on this. If you need any further information I'll provide.
Attachments:
1-Axis Motion controler_M1.vi ‏151 KB
5steps test.txt ‏2 KB

Tried with while loop, and "REPORT" button in front panel as loop condition but not working out well required..

Similar Messages

  • Can I use Prime to create a WLAN report for only one controller?

    I have multiple controllers all configured with the same WLAN/SSID, like most people probably do. 
    I am trying to get a report on one WLAN/SSID from only one controller.  I don't want a report for the WLAN/SSID that contains information from all controllers - just one controller.
    Has anyone ever figured out how to do that?  Am I missing something?

    We're close to that, anyway.  I have a guest WLAN configured on each controller, and I want to see how metrics on the guest SSID, but would like it broken out per controller.
    The guest network client count almost equals our production client count, and all that traffic is getting tunneled across the backbone.  I want to explore local connectivity options - possibly dumping the guest WLAN traffic out at the controller instead of it traversing the corporate backbone.
    Can't seem to figure out how to get a report to show that - seems like it's "all or nothing"...

  • Warning while loading example VIs for XPS motion controller

    Hi,
    I'm new to Labview. I want to control the XPS motion controller using Labview and I wanted to get started with the examples provided by XPS along with the drivers. But I get a warning while loading the example. I have attached a screenshot of it. Please help.
    Also, opening the example opens just the front panel. How do I open the bloack diagram of the example VI?
    Thank you.
    Attachments:
    warning.png ‏40 KB

    That warning is nothing to be worried about -- it just means that things were found in a new location, which is normal when you move code around.  Once you save the project it should go away.
    To look at the block diagram, use Window - Show Block Diagram, or simply Ctrl+E.
    Good luck!
    Edwin

  • Creating Labview VI for Newport's ESP6000 motion controller

    I am working on creating a Labview VI for ESP6000 motion controller (Newport). I want to move to stages independently one by one and acquire synchronized data from the analog input of the controller during the motion of the one of the stages. If there is anyone working with Labview on ESP6000, I will be glad to dicsuss common issues, obstacles, sub vi's etc.
    ceyhun

    We built a test station for an automotive component with the ESP6000. The biggest limitation we ran into was the 1000-sample buffer capacity of the analog input. We were hoping that it would behave like the NI DAQ boards. It was not our choice to use the ESP6000. The customer supplied it. The whole setup cost in excess of $9,000. The NI equivalent would be about 2/3 that much. Anyway, Newport supplies a driver that does work. It takes some work to get everything going properly though.
    Remember that Alliance Members are here to help. We do this stuff every day.
    Daniel L. Press
    PrimeTest Corp.
    www.primetest.com

  • How to use LabVIEW FPGA on Custom FPGA board other than NI products .....Also how to develop RTx DLL for a customised motion controller hardware

    I'm using RTx, LabVIEW RT and LabVIEW FPGA.
    The GUI is windows based. The motion control and FPGA  are RTx based.
    Is there any way to develop device drivers for the custom hardware in RTx. For example motion controller hardware, FPGA hardware, PCI hardware.
    Is there a possibility to use custom FPGA boards to use with LabVIEW FPGA.
    Please send me some links
    Thanks
    Bhoopathy
    Take life as it comes! you may never know what's gonna happen Tommorrow

    CODE WARRIOR Hello. I believe this question was answered in a previous post. Please let us know if you have any new questioins or if you need some clarification.
    You are able to develop device drivers for your custom hardware using the NI Measurement Hardware Driver Development Kit.
    However, it is not possible to use custom FPGA boards with LabVIEW FPGA. The FPGA boards have to be one of our R Series boards. Here are some links that should shed some light on the Measurement Hardware DDK.
    Measurement Hardware Driver Development Kit Frequently Asked Questions
    NI Measurement Hardware DDK (Driver Development Kit)
    Please post if you have further questios.
    Efosa O.
    NIAE

  • Connecting Hall Effect Sensor as an encoder(fe​edback) for PCI 7356 Motion Controller

    Hi,
    We have Labview 2010 and the following hardwares for testing a specific motor (a brushless DC motor):
    NI PCI 7356 Motion Controller
    NI UMI 7774
    AKD Servo Drive P00606
    However, I met some difficulty when wiring the motor to the motor drive(and controller). In the manual, it says PCI 7356 needs encoder signals as the feedback. But our motor doesn't have a built-in encoder. It has three Hall Effect Sensors, which we plan to use as an encoder. If we feed the hall sensor signals as the encoder phase signals (Phase A, B) to the drive/controller, I wonder if Labview or PCI 7356 (after an appropriate configuration) can adjuct the phase (from 120 degree to 90). Does it work even without the adjustment?
    If the above doesn't work, can I feed only one Hall Effect sensor signal as Encoder Phase A and don't feed anything to Phase B (since I only need control the motor speed in one direction)? Will PCI 7356 or Labview recognize the signal and function accordingly?
    If it doesn't work as well, could I use motor's Back EMF as a feedback (this motor produces a decent sinusoidal back EMF)? If I can, how should I configure the hardware and wire the motor to controller accordingly? 
    If all three above don't work, could you suggest a way to solve this problem?
    Thanks so much for your help.
    Best,
    Chen

    Hey Chen,
    I have comfirmed that the PCI card will not be able to do feedback with the hall effect sensors. However, you could do that with our NI 951x modules if you run it in FPGA mode. You would need an extra IO module to set up the hall effect sensors with, but you could effectively customize your control and your feedback on the FPGA board immediately. 
    For your other post, I am not sure you can create a time constraint on the move, I believe that when you define a motion, you would need to define the number of steps or the position and not the time. If you are running the motor at a specific velocity for an amount of time, you would need to set that as the number of revolutions and not time.
    I hope this helps.
    Regards,
    A. Zaatari
    National Instruments
    Applications Engineer

  • Motion controller for globe E-2620 motor

    What is the correct NI controller/motor drives for a pair of Globe Motor E-2620
    DC Permanent Magnet Motors with Optical Encoder?
    Motor Specs:
    P/N 537A244-3
    24VDC Motor Voltage
    3.1A Max Rated Load
    HP HEDS-5500 Encoder
    Thanks
    Russ Smith

    Hello Russ,
    Thank you for your interest in National Instruments.  For the DC Permanent Magnet Motor you specified you will need one of our brushed DC servo motor drives: 7652 (2 Axis of control) or the 7654(4 Axis of control).  The controller hardware you need will be dependent on what other features you need for your motion system you are building.  The two options for controlling these types of motors are the 7340 series and the 7350 series.  To see the differences in these two types of motion controllers go HERE.  Let us know if you have anymore questions.  Thanks and have a great day.
    Regards,
    Mark T
    Applications Engineer
    National Instruments

  • Report for monthly sales(sales office wise,sales group wise,plant wise)

    Please send the Report for monthly sales(sales office wise,sales group wise,plant wise)  with T.CODE.,

    Hi
    As per my knowledge there is no Standard Report in SAP based on sales office, sales group. and plant.
    You may create your own report using MC18,MC21 and MC24.... Otherwise ask your ABAPer's help...
    Muthu

  • How do I get labview for linux to send out ascii code to a motion controller?

    I have posted part of this problem but I will now try to clearify things. I have an x-y stage that needs motion control. I have to run the motion controller from within a linux system (RedHat 7.1) due to others in the research area. I have found a motion controller card (PCI) that will run under linux. This card is not National Instruments. I understand that they do not have drivers for their controller cards. This other card comes with the companies own software that uses ASCII codes to move the motors on the stage. I was hoping to create a program that could call those ASCII codes to move the stage. An example would be if a user wanted to have the stage move to the right he would press a b
    utton on the screen instead of typing in whatever ASCII could that move to the right happens to be. How would I go about programming something like this? I have heard of others doing things like this but I am unsure of how to program labview to send out ASCII codes to a PCI card to move motors.

    > would I go about programming something like this? I have heard of
    > others doing things like this but I am unsure of how to program
    > labview to send out ASCII codes to a PCI card to move motors.
    Look in the manual to see get familiar with the sequences of codes you
    need to write, and more importantly, where you write them to. I suspect
    a memory location, but it could be a socket or port.
    Each of these locations will have a slightly different way of accessing
    it. Once you know, search devzone for how to do it on linux, or post
    back here.
    After you can send the codes to the right location, you probably want to
    build a state machine that simplifies the interface and prevents certain
    actions from taking place. Now determine which buttons or
    keys perform
    which actions and use either the event structure or the older polling
    for control changes to affect state changes in the state machine.
    I'm summarizing here assuming that you know what a state machine is and
    why you'd want to use it. If I'm assuming too much, do some research
    and post again with more specific questions. Also be sure to look at
    example VIs as they show how to respond to UI actions.
    Greg McKaskle

  • Driver for MM4000 series (motion controller) for labview 6.1 (gpib)

    Hello,
    I need the instrument driver for a newport motion controller MM4006.
    I found the driver for MM4000 series, it could be ok, but I need it for labview 6.1 and not  for labview 7 or 8.
    Is it possible to find this driver for older version of labview than 7 or 8?
    Thanks
    Best regards.
    Ludovic

    Good idea, I'm not sure of the result, but... Here is the zip file (aviable here).
    (oups, you were faster ^^)
    Message Edité par Mathieu R. le 12-08-2006 05:19 PM
    .mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
    Mathieu R.  
      CTD - Certified TestStand Developer / Développeur TestStand Certifié  
      CLAD - Certified LabVIEW Associate Developer  
    Attachments:
    npmm4000.zip ‏419 KB

  • How to restrict "insert new data source" in Analysis, edition for Microsoft Office report

    Hi Experts,
    There is a requirement in my current project: when an end user access a Analysis, edition for Office Report from BI platform, they can view and refresh the report. But users should not be able to add new data source in that Analysis Report. As per my understanding, that means "insert data source" button should remain disable for the user.
    I have check all available access levels from CMC, but cannot find any. It will be great if you let know correct access level in CMC for the same.
    Any comments/recommendation will be appreciated.
    I am using BOXI4.1 SP3 version with Microsoft Office 2013.
    Thanks in advance.
    Regards,
    Animikh Chaudhury

    The answer from our account manager is that there is only one license model for AO - which means every user is able to refresh, navigate, use planning functions and add source data (whith the standard license). Adding a DS is not really more then navigation because you can build a Query with all key figures and characteristics of a cube which gives you flexibility. That makes sense because there are no authority checks installed from SAP to avoid this (maybe this is different in combination with HANA and workspaces) .
    Futhermore SAP has no possibility to measure how many users are doing which functions instead of recording every action of every user. But where should they do it? You could use it with BO or with Netweaver or in mixed Environments. The BO license check is done on BO platform and there you have no possibility to create new users which you need for connection (I'm not sure how this is monitored in a pure BW Environment without BO).
    Furterhmore another possibility to add new data is using vba. You don't really need the buttons from the menu.

  • Office 2011 for the mac, want to export contacts with a specific catewgory so I can produce a specific report

    office 2011 for the mac, want to export contacts with a specific catewgory so I can produce a specific report, I can do this by selecting a tab delimited file format & shows up as .olm but I can'y open this file or import to another application, any suggestions?

    http://answers.microsoft.com/en-us/mac

  • Question of Requirements for Servo Project (Beginner to Motion Control in NI)

    Hello, 
    I need to automate the rotation of an object while measuring the resistance/required torque and rotation angle. This should be achievable with a servo motor with torque feedback, if I've been informed correctly. I will then need to compare the torque vs. angle curves and produce some kind of output depending on that analysis.
    I'd like to ask from those more experienced:
    I have experience in LV so I would like to have that as the programming environment. What other components will I need to control a servo in this fashion (with feedback control and the ability to send a digital output dependant upon the results of my analysis)? Any recommendations? 
    Thank you. 

    Thanks for the response.
    I see now. I didn't know this holds for servos as it does for DC motors.
    To reiterate:
    In essence I need a system to do the following:
    1. When triggered by existing PLC system to "GO", begin.
    2. Actuate servo or stepper a certain # of revolutions, measure/calculate torque with T=KI proportionality.
    3. When revolutions finished, go back. Analyze Torque vs. angle curve. 
    4. Depending on result of (3), either send PLC system "TRUE" or "FALSE". 
    That is essentially all. this system would fit between two stations of an existing PLC system. I want to program the servo or stepper control with LV. 
    However, I don't know where to begin. What would one need? Should I use a stepper or servo? In addition to the controller and servo/stepper, what else do I need?

  • PXI 7344 motion controller as a DAQ device for ELVIS

    Hi,
    Is there a way to reconfigure a PXI-7344 motion controller with its two 68-pin connectors so as to use it as a DAQ device that would receive the signals from a NI ELVIS workstation. The 7344 has a "motion I/O connector" and a "digital I/O connector". Analog outputs are even possible if I remember well, as well as digital.
    Thanks

    Hello,
    The card does has some analog input and outputs. I would check the manual here: http://www.ni.com/pdf/manuals/370838b.pdf. The DAQmx API with a DAQ card is going to be much better than interfacing with a motion card, but you should be able to read off it at the least.
    Rahul B.
    Applications Engineer
    National Instruments

  • Time varying velocity input for servo motor

    I 'm running a PXI-8145RT CPU with a 7344 motion controller.I want to load a time varying velocity profile for my servo motor.How can I do this? The "load velocity" tile does not have an input for such a profile,but only for a maximum velocity that will be reached after a certain time.

    Are you using the Motion Assistant or a programming language like LabVIEW? If you are using the motion assistant, you can do a contoured move with a Position-Velocity-Time Profile. I have never done this, but it sounds to be what you are looking for. This assumes that you have a controller that can do contoured moves.
    Hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

Maybe you are looking for