MSDTC Failure - Enlist operation failed: 0x8004d01c(XACT_E_CONNECTION_DOWN).

Hi,
We had to recycle MSDTC for some other reason and noticed that all transactions started failing with the below error.
Enlist operation failed: 0x8004d01c(XACT_E_CONNECTION_DOWN). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MS DTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the
resource manager.
All these transactions were going through fine until we recycled the dtc service. We noticed in some forums that the only solution is to restart sql server service.
Curious to know -
What is the sql server registration process with MSDTC and what could cause this to fail?
Any other resolution other restarting the services ?
Any proactive measures to avoid this failure?
Trinity

Hi Trinity,
The Microsoft Distributed Transaction Coordinator (MS DTC) is a transaction manager that allows client applications to include several different sources of data in one transaction. MS DTC coordinates committing the distributed transaction across all
the servers enlisted in the transaction. An installation of Microsoft® SQL Server™ can participate in a distributed transaction by:
Calling stored procedures on remote servers running SQL Server.
Automatically or explicitly promoting the local transaction to a distributed transaction and enlist remote servers in the transaction.
Making distributed updates that update data on multiple OLE DB data sources.
If these OLE DB data sources support the OLE DB distributed transaction interface, SQL Server can also enlist them in the distributed transaction.
It was hard to determine the root cause based on the information you posted above, but you can capture a network monitor trace from the SQL server machine and the client machine while you reproduce the "0x8004d01c(XACT_E_CONNECTION_DOWN)"
error. We can get Network Monitor tool from the site below:
Microsoft Network Monitor 3.4:
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
Furthermore, on Windows 2003, if we installed MSDTC before installing Windows SP2, the MSDTC will not be updated immediately. The MSDTC update will happen when we change some Windows Components in the Add/Remove Windows Component later. You can try to reinstall
MSDTC to see if this helps.
Regards,
Elvis Long
TechNet Community Support

Similar Messages

The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))

Hello,
We are getting the following error when trying to backup our fileserver (DPM 2012 R2) to tape.
"The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))"
What is interesting:
- The "Short-Term Protection" to disk runs successfully without error
- The "Long-Term Protection" to tape fails after writing ~2TB of data to a TL2000 tape loader. (Always appears to fail towards end of job with the above error)
- In the past (until roughly a month ago) the tape portion of this job was completing successfully.
The DPM logs fail to give much information around the time of error regarding any failures. Likewise windows event logs give no hint of a problem when the job fails.
Looking for any ideas that may help resolve this.
Cheers!

Hi
Has it just started happening? What rollup version are you on currently?

The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079))

Recently we got this error, while backup to tape, and no idea what is it.
What cause of this error?
The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079)
DPM 2010 with latest roll-up (KB2250444) | DELL Server R710 (Windows 2008 R2 SP1) RAM: 24GB PF: 36-60GB | DELL TL2000 (2 Drives) | And still struggling and monitoring... :(

Hi,
Try this workaround, increase the TcpMaxDataRetransmissions to 10 or more.
How to modify the TCP/IP maximum retransmission timeout
http://support.microsoft.com/kb/170359
Diagnostic steps when "Semaphore timeout" is hit during network transfer:
1. Check if the protected server (sender) or DPM (receiver) was under stress or inaccessible during the time of failure – from event logs from both the machines. Retry should work if the packet loss was because of either of the servers being inaccessible
or under stress for a period.
2. Check if the network between the PS and the DPM is flaky – retransmit count from ‘netstat –s’ or perfmon counters can give an idea.
3. Else contact network support engineer to diagnose the packet loss issue – netmon captures from both machines, packet route and network layout/devices will be required to start the investigation.
4. Take some performance monitor logs on both DPM and Proteted server side.
Some good and basic perfmon counters to take to see if the servers are under stress are below.
Logical Disk/Physical Disk
\%idle
• 100% idle to 50% idle = Healthy
• 49% idle to 20% idle = Warning or Monitor
• 19% idle to 0% idle = Critical or Out of Spec
\%Avg. Disk Sec Read or Write
• .001ms to .015ms = Healthy
• .015ms to .025 = Warning or Monitor
• .026ms or greater = Critical or Out of Spec
Current Disk Queue Length (for all instances)
80 requests for more than 6 minutes.
• Indicates possibly excessive disk queue length.
Memory
\Pool Non Paged Bytes*
• Less that 60% of pool consumed=Healthy
• 61% - 80% of pool consumed = Warning or Monitor.
• Greater than 80% pool consumed = Critical or Out of Spec.
\Pool Paged Bytes*
• Less that 60% of pool consumed=Healthy
• 61% - 80% of pool consumed = Warning or Monitor.
• Greater than 80% pool consumed = Critical or Out of Spec.
\Available Megabytes
• 50% of free memory available or more =Healthy
• 25% of free memory available = Monitor.
• 10% of free memory available = Warning
• Less than 100MB or 5% of free memory available = Critical or Out of Spec.
Processor
\%Processor Time (all instances)
• Less than 60% consumed = Healthy
• 51% - 90% consumed = Monitor or Caution
91% - 100% consumed = Critical
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))

I keep getting the following error when trying to run a backup:
The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))
Any resolution to this issue is greatly appreciated. Thank you.

Hi
First we Need some more Informations.
What are you trying to Backup?
Has it worked before?
Are there any Errors on the Agent Tab?
Are there any Errors on the affectet Server in the Event Log?
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))

For the past couple of days I have been getting the following alert on my tape backups:
Cannot verify tape data.
The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
It has completed the backup but I get this error when performing a verify or when I try and restore.
This error only occurs on the same server we backup in the protection group. The other 5 servers backup fine.
We are using DPM 2010 (3.0.8195.0)

Same here.
When I came back from vacation I found the same error in our DPM 2012.
The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
I cannot find anything in the eventlog saying that the tapelibrary has been offline.
How can I check that?
Last nights tape-job went "almost" well, one server (VM) still has this error. (But I dont know if that depends on the fact that it had status "Missing" in hyper-v manager due to a Win-update shutdown on a host that had a misconfiguration (auto-reebot).)
I rebooted the DPM-server this morning and then I tried to manually run all tapejobs again but they get this status again.
I do not understand this error and why it suddenly appears to work again for a scheduled job but not when I trigger the job manually.
Is there not a solution for this?
/Anders

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

HealthCheck operation fails on mcsmgr.log and Error sending DAV request. HTTP code 600, status on Data transferservice.log

Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
Regards

I have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 ===

Moving big files(600MB) with FTP Adapter error The IO operation failed

I everybody, I have the next trouble:
I need to move big files from one server to another remote server through ftp protocol. All the configuration is correct and I am able to move little files
with no problem, but when I move big files the server shows the next error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'readEBS'
failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][NONE]" IO operation for "/tmp/TestLogSOA/DetalleCostos3333333.dvd"
failed. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_NOTA start() failed on
resource 'SOADataSource_ohsdomain': XAER_NOTA : The XID is not valid oracle.jdbc.xa.OracleXAException at
oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1532) at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:321) at
weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:51) at weblogic.jdbc.jta.DataSource.start(DataSource.java:722) at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1228) at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161) at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:297) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434) at
weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1592) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1496) at
weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396) at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.getConnection(XMLDocumentManagerImpl.java:623) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:208) at
sun.reflect.GeneratedMethodAccessor1534.invoke(Unknown Source) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at
org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at
org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at
org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at
org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy285.insertDocument(Unknown Source) at
oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:244) at
oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:99) at
oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:773) at
oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1106) at
oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:502)
at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:356) at
oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:171) at
oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139) at
oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179) at
Thanks!!!

Hi idavistro,
You can try setting the XA Transaction Timeout for SOADataSource.
1. Log in to the WebLogic Admin Console.
2. Select in the left tree: Services-> Datasources-> SOADataSource->Transaction.
2. Select Set XA Transaction Timeout.
3. Set XA Transaction Timeout to 0.
4. Restart the server and check if the error still appears.
Regards,
Neeraj Sehgal

Security setup operations failed: creating system keys

I have just downgraded my T60 laptop from Vista to windows xp using the lenovo CD's.
Everything seems to be working well, except that each time I boot up the computer, the lenovo security setup software runs. If I follow the menus all the way through, I get to the following error on the last screen:
"your security settings have been configured however, one or more setup operations failed: creating system keys"
There was also a message that previously briefly flashed during the bootup (on the "bios" screen?) which stated that the system was designed to use fingerprints to protect something or other, but this was not enabled. However: I then ran all updates for windows xp and for lenovo drivers etc. This message has now gone away (and unfortunately I didn't write it down).
I'm guessing the failure to "create system keys" results in the software running each time I boot up.
Another possibility: I have not yet enabled the symantec security, as I intend to uninstall it and use other virus protection software. Could this be causing the"failure to create system keys"?
(The fingerprint reader works fine, and reads my fingerprint at the windows logon screen.)
**UPDATE**: uninstalled symantec security software, and this had no effect.
Message Edited by orson_m on 12-29-2008 02:47 PM

I have just downgraded my T60 laptop from Vista to windows xp using the lenovo CD's.
Everything seems to be working well, except that each time I boot up the computer, the lenovo security setup software runs. If I follow the menus all the way through, I get to the following error on the last screen:
"your security settings have been configured however, one or more setup operations failed: creating system keys"
There was also a message that previously briefly flashed during the bootup (on the "bios" screen?) which stated that the system was designed to use fingerprints to protect something or other, but this was not enabled. However: I then ran all updates for windows xp and for lenovo drivers etc. This message has now gone away (and unfortunately I didn't write it down).
I'm guessing the failure to "create system keys" results in the software running each time I boot up.
Another possibility: I have not yet enabled the symantec security, as I intend to uninstall it and use other virus protection software. Could this be causing the"failure to create system keys"?
(The fingerprint reader works fine, and reads my fingerprint at the windows logon screen.)
**UPDATE**: uninstalled symantec security software, and this had no effect.
Message Edited by orson_m on 12-29-2008 02:47 PM

AIA FP 11.1.1.6.0 "Metadata transfer operation failed"

Hi,
I wonder if anyone can help. I am receiving the error below while performing a fresh install of AIA FP 11.1.1.6.0
"Metadata transfer operation failed" MDS-00597 failure to open the archive file /tmp/archive4766411343835100171.jar
Sure the above error points to a non-existent file but where do I get this file from? The directory is not write protected and the user performing the installation can write to that
directory. Also, there is adequate memory so I don't think its a system resource issue.
It is important to note that this error appears at the "Deploy Application Configurations" stage of the install.
System Info
Weblogic 10.3.6.0
SOA 11.1.1.6.0
OER 11.1.1.6.0
Oracle Database XE 10.2.0.1.0
[exec] soa_server1
[exec] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[exec] For more help, use help(domainRuntime)
[exec]
[exec] Uploading metadata to server . . . . .
[exec] Metadata tranfer operation failed
[exec]
[exec] This Exception occurred at .
[exec] javax.management.MBeanException: MDS-00597: Failure to open the archive file /tmp/archive4766411343835100171.jar. Cannot create ArchiveMetadataStore for the archive file /tmp/archive4766411343835100171.jar.
[exec] error in opening zip file
[exec] Problem invoking WLST - Traceback (innermost last):
[exec] File "/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/lib/py/updateMetadata.py", line 53, in ?
[exec] at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[exec] at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[exec] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[exec] at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[exec]
[exec] java.lang.Exception: java.lang.Exception: Error!!! Import MetaData Failed !!
[exec]
BUILD FAILED
/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/AIAExecuteDriver.xml:222: The following error occurred while executing this line:
/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/AIAExecuteDriver.xml:65: The following error occurred while executing this line:
/home/oracle/Oracle/Middleware/AIA/aia_instances/AIA/tmp/AIDExecuteDP_temp_1380328407.xml:94: The following error occurred while executing this line:
/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/lib/AIDConfigurationLibraryTasks.xml:845: exec returned: 1
Total time: 5 minutes 27 seconds
Deployment Command Return Value Configuration: 1

You will face this issue when something goes wrong with SOA server.. your SOA server must be in running status..
Edited by: 945735 on 09-Aug-2012 03:43

Failed to mount database "General Users". Error: An Active Manager operation failed

Failed to mount database "General Users". Error: An Active Manager operation failed. Error: The database action failed. Error: Database 'General Users' on server 'EX02' cannot be mounted due to a previous error: At '12/3/2014
3:52:17 PM' the Exchange store database 'General Users' copy on this server appears to be inconsistent with the active database copy or is corrupted. For more details about the failure, consult the Event log on the server for other storage and "ExchangeStoreDb"
events. A successful failover restored service. If you have addressed the underlying problem, or if you have decided to attempt to mount the database despite this error, the mount operation may be attempted by using the '-Force' parameter of the Mount-Database
cmdlet. [Database: General Users, Server: EX02.domain.com]
Md. Ramin Hossain

Hi,
From your description, it is recommended to suspend the failed database copy at first using the cmdlet below.
Suspend-MailboxDatabaseCopy -Identity "xxx"
And then reseed the database with a new copy using Update-MailboxDatabaseCopy -Identity "xxx" -DeleteExistingFiles cmdlet.
What's more, here is a helpful thread for your reference.
Update-MailboxDatabaseCopy
http://technet.microsoft.com/en-us/library/dd335201(v=exchg.150).aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Error - ipi, message queue operation failed

we are trying to startup bmq but its finished with error.
Please could you help us ?
BEA MessageQ, V5.0 RP8, Wed Mar 29 13:13:49 EST 2000
Copyright (c) 2000 BEA Systems, Inc. All rights reserved.
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, group control process for group 102 is running
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, queuing engine is running
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
ipi, message queue operation failed
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, initialization failure
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, caught signal 15
************ dmqqe (12975) 16-FEB-2012 16:31:45 ************
qe, queuing engine is exiting
************ dmqgcp (12973) 16-FEB-2012 16:31:45 ************
gcp, group control process for group 102 is exiting

Could you please provide the init file and the OS information,
Also, Please enable the DMQIPI_TRACE to get more trace if possible, thanks.
Regards,
/Lingtao
Edited by: Lingtao on Mar 6, 2012 2:51 AM

PC Suite Installation Operation Failed, help pleas...

I've just bought a nokia E51 and i can't get the pc suite to install.
The disc that came with the phone has installed the drivers etc, and a newer version of pc suite was found 6.85.14.1 which it downloaded.
However during the installation process it only ever gets to step 5/6 and the message "installation operation failed" comes up with " another installation is already in progress. Complete that installation before proceeding with this install"
I don't have any other installation going on at the same time. Is there something in my computer stopping this installation? (I've got windows XP)
Cheers
Message Edited by helthea on 20-Mar-2008 02:12 AM

This message was posted in 2008. It is now 2011, there is no solution placed in this thread, and the problem still exists. Incredible.
I have just tried to install PC Suite (downloaded from Nokia site about a week ago), and can you believe it, the installation still stops at step 5/6 with the same message Installation Operation Failed with not a scrap of additional information about why. I have disabled Realtek drivers (incompatibilities are documented), tried reinstallations etc
Having done some Carbide/Qt/C++ development for Symbian, I am aware that there is usually something that doesn't work, and I have developed countless workarounds for the many problems (its the only way), but this one currently has me stumped.
I would appreciate any tips anyone has how to find out more about this installation failure. Is there a log that tells one what led to the failure, etc ? Thanks.

Request Operation Failed in CAD

I have remote agents using IPC who (occasionally) receive "Request Operation Failed" from CAD when trying to transfer a call. What causes this?

Hi Chris,
I believe you have a Blind Transfer button on CAD configured at the workflow level that enables the transfer?
If so, then you would be hitting the following defect:
https://tools.cisco.com/bugsearch/bug/CSCuo01086/?reffering_site=dumpcr
Basically we have documented the actual information on the Blind Transfer on CAD in the CDA guide and what would happen during a failure.
Regards,
Arundeep

Error on nexus 7k series " operation failed.the fabric is already locked"

getting following error on nexus 7k series switch: error is " operation failed.the fabric is already locked", while removing ntp commands (no ntp server 10.101.1.1) from switch. Please help.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

MSDTC Failure - Enlist operation failed: 0x8004d01c(XACT_E_CONNECTION_DOWN).

Similar Messages

Maybe you are looking for