MSG in HD, Verizon fighting to get the HD content

for those of you that are upset that verizon does not carry the local games in HD for teams like the Knicks and Rangers
http://finance.yahoo.com/news/Verizon-Petitions-FCC-to-Rule-prnews-1395958990.html?x=0&.v=1&.pf=pers...
Verizon is working to get those for you
====================================================================================
Error exists between keyboard and chair.

Well, I have a question. I think we have a somewhat unique situation here in Buffalo given that our NHL team is broadcast on MSG/MSGHD and yet we couldn't get access to Cablevision's service even if we wanted to. Hence, Cablevision's refusal to grant HD access for these channels to Verizon not only stifles competition in their market, but outside their territory as well.
Having said that, does anyone think that provisions could be made to allow carriage of the Sabres games given that we are out of Cablevision's service area? Mayboe one of they Verizon techs on here could shed light on whether such a carriage agreement would be unprecedented or if any credence could be awarded to such an idea. I would hope that, if feasible, the Sabres are working hard with Verizon to convince Cablevision to provide access to the feed, given that the Sabres have no stake in MSG other than a contract to air their games on the network.

Similar Messages

Iphone 4s coming friday, what is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across.

What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.

First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem!

I am trying to get the music content on my Mac onto my iPhone. When I connect the devices, the computer does not seem to recognize the iPhone, i.e., on the open itunes window, the iPhone is not seen as a connected "device".

I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".

Hi,
See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/
Also...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538

Getting the page content as pdf file

Hi All,
I have a use case like i need to get the page content as pdf file.
For this i found xsl file and it's config under the following locations
/libs/cq/config/rewriter/pdf/transformer-xslt --config of source
/libs/wcm/core/content/pdf/page2fo.xsl -- xsl file location
For custamising this functionality i copied both confing node and xsl file under "/apps" .In the Config file i changed source to refer xsl file under /apps.But it's not taking config changes.
I have looked into http://cqblueprints.com/xwiki/bin/view/CQ+FAQ/How+can+I+configure+the+ PDF+rewriter
there it's saying like we need to modify the com.day.cq.rewriter.xml.XSLTTransformer class. i am not getting how to modify it.
I need this urgently
Thanks,
Chinna Yadlapalli.

This script:
http://indesignsecrets.com/zanelli-releases-multipageimporter-for-importing-both -pdf-and-indd-files.php
answers all your questions.
Peter

Getting the document content in a variable??

Hi,
How can I get the entire contents of a document into a string variable? I donot
want to print the contents inline but rather have to get them in a variable. Using
printDoc or printProperty tag?? I guess I will have to use printDoc but then how
can I stop the contents from being displayed in the jsp and how can I put them
in a variable??
Please help me...
Thanx.
Prirua

You should always double-check code put on the newsgroups, even if it's
put there by me :)
It probably should be at the beginning:
<es:forEachInArray array="<%=docs%>" id="adoc"
type="com.bea.p13n.content.document.Document">
<%
     byte[] bytes = adoc.getContentBlock(0L, -1L);
Notice 'byte[]' instead of 'bytes[]', the type specified as Document
(Content doesn't have the getContentBlock() method, the sub-interface
Document does), and the 'L's on the numbers to specify that they are
longs to help the compiler find the correct method.
Greg
Prirua wrote:
Hi,
Thanx for your propmt reply. My code looks somethinglike this
<es:forEachInArray array="<%=docs%>" id="adoc" type="com.bea.p13n.content.Content"
          <%
          bytes[] bytes = adoc.getContentBlock(0, -1); // retrieve all the content
          String enc = adoc.getPropertyAsString(null, "encoding");
          String str = null;
          if (enc != null)
               str = new String(bytes, 0, bytes.length, enc);
          else // use VM default encoding
               str = new String(bytes);
          %>
          <li>The document title is: <cm:printProperty id="adoc" name="Title" encode="html"
/>
     </es:forEachInArray>
But it is giving me these two errors...
C:\bea\wlportal4.0\applications\portal\MyPortal\WEB-INF\_tmp_war_portalDomain_po
rtalServer_MyPortal\jsp_servlet\_portlets\__contentq.java:152: cannot resolve
sy
mbol
symbol : class bytes
location: class jsp_servlet._portlets.__contentq
bytes[] bytes = adoc.getContentBlock(0, -1); // retrieve
all the content //[ /portlets/contentQ.jsp; Line: 19]
^
C:\bea\wlportal4.0\applications\portal\MyPortal\WEB-INF\_tmp_war_portalDomain_po
rtalServer_MyPortal\jsp_servlet\_portlets\__contentq.java:152: cannot resolve
sy
mbol
symbol : method getContentBlock (int,int)
location: interface com.bea.p13n.content.Content
bytes[] bytes = adoc.getContentBlock(0, -1); // retrieve
all the content //[ /portlets/contentQ.jsp; Line: 19]
^
2 errors
Could you plz specify if I have to include some file or something ?
Thanx.
Gregory Smith <[email protected]> wrote:
You will need to call the getContentBlock() method on the Document
object to retrieve the bytes of the document's content. Then, you do
whatever you need to with the bytes. When converting it to a String,
you
should be aware of double-byte-character encodings, and should check
the
Document's encoding metadata attribute, e.g.:
<%
bytes[] bytes = doc.getContentBlock(0, -1); // retrieve all the content
String enc = doc.getPropertyAsString(null, "encoding");
String str = null;
if (enc != null)
str = new String(bytes, 0, bytes.length, enc);
else // use VM default encoding
str = new String(bytes);
%>
In 8.1, the new <cm:getProperty> is able to retrieve the BinaryValue
of
a binary property of a Node.
Greg
Prirua wrote:
Hi,
How can I get the entire contents of a document into a string variable?I donot
want to print the contents inline but rather have to get them in a variable.Using
printDoc or printProperty tag?? I guess I will have to use printDocbut then how
can I stop the contents from being displayed in the jsp and how canI put them
in a variable??
Please help me...
Thanx.
Prirua

How to get the text content of an XMLElement

Hi,
Here is a XML sample:
<toto attrib1="titi">tata</toto>
We want to get the text content "tata".
Using an XMLElement (from the class "oracle.xml.parser.v2.XMLElement) to manipulate the element "toto", when we use the getNodeValue method, we always retrieve "null".
So, what is wrong in our procedure and how to resolve this problem?
Thanks in advance for your help
Bye

You need to get the child nodes of the Element and iterate until you find a node of type Node.TEXT_NODE.
Elements don't have text content, they instead contain text node children.
Just remember, too, that they can also contain comments, processing instructions, etc., in addition to the text you are looking for:
<toto><?pi?>Tata</toto>

When I open a message in Thunderbird, I sometimes get the message content of the preceding message.

When I open a message in Thunderbird, I sometimes get the message content of the preceding message.
This means that the whole content of the message is replaced by the content of the preceding message. I cannot see the message and have to ask the sender to send it again. Why is this, is my mail system overloaded or what?

This usually indicates folder corruption.
Right click the problem folder and select Properties. Then Repair Folder.
Be prepared to lose messages if the corruption is too bad. It might be a good idea to move any messages that you want to keep to a new folder. Make folders under Local Folders to sort your keeper emails into. It is a good idea not to keep lots of mail in the Inbox anyway as you will see when you read the attached article.
Read this article about maintaining your system to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize. Can anybody help? Basically LR is useless, it has been nothing but problems.

It would probably be better to continue your previous thread on the same question than to start a new one.

I am not getting the Portal Content inside the System Landscape

Hi,
I am not getting the Portal Content inside the System Administrations-> System Configuration->System Landscape. This is not visible. I am SAP NetWeaver 7.0.
What could be the possible reasons?
Regards
Kaushik Banerjee

Kaushik,
do you have the full tree in Contentadmin? do you have no entry in the systemadmin? or is it just empty in the lower nodes? this would be normal, you don't see the content in systemadmin, just the defined systems.
kr, achim

GetNodeValue and SetNodeValue not getting the whole content

Hi!
I've been having some problem with GetNodeValue and setNodeValue and I was wondering if anyone can help me...
for example, Let's say a portion of my XML Document has:
<Buyer>Tommy Jones</Buyer>
<Item> Used Cars </Item>
nodes... and I'm trying to do getNodeValue() on Buyer... and it returns only a portion of the Node Value... "Tommy Jo". I had to make a ChildNodeList and append all the child nodes Values to get the full content "Tommy Jones".
and when I do a setNodeValue(), trying to replace Item, with Value, "New", I would get an output like: "Newd Cars" or even "Newsed Cars"... very inconsistent even though I used same method at different places.
Question 1: Shouldn't getNodeValue() return the whole actual value, rather than making me go through "imaginary" childNodes (that I apparently don't see anywhere) to append the text to get the full value? So I guess my first question is why is this happening?
Question 2:
What can I do besides going through all the Child elements under Buyer and Item to append/remove to get the full content using getNodeValue()and setNodeValue() methods?
Thank you so much for your time and help.

Document document;
document.getElementByTagName("tagName").item(0).getFirstChild().getNodeValue();
returns the text value in a element.
document.getElementByTagName("tagName").item(0).getFirstChild().setNodeValue(String nodeValue);
sets the text value of a element node.

TS3899 Whenever I send a email from iPad mail app with an attachment from pages or numbers, the receiver is getting only attachment in the email. They are getting the email content. How to troubleshoot this issue.

Whenever I send a email from iPad mail app with an attachment from pages or numbers, the receiver is getting only attachment in the email. They are getting the email content. How to troubleshoot this issue.

Someone is probably sending spam with your address forged on the To: line. Could be one of your old contacts with a Windows machine has a virus that's doing it. It's also possible your e-mail account has been hacked, though I'd think such a hacker would be a bit more purposeful.
For more information, see:
http://www.reedcorner.net/guides/macvirus/is_it_malware.php#spam
* Disclaimer: links to my pages may give me compensation, and should not be taken as endorsement of my services by Apple.

Getting the message content in User Messaging Service

Hi,
I have a specific requirement in my project to get the message content of any message sent by ums, given a ums message id. Is there any api in UMS or anyother way to get this details.
Thanks in Advance,
Sudan

Just wanted to give kudos for the example you have below ... i was in the same situation and was madly looking for a reference like the one below ...
Thanks,
M.

Is Verizon going to get the Blackberry Storm 3 (9570)?

I am currently an Alltel customer that was bought out by at&t. We are set to change over in December or January. I may or may not stay with at&t as I have heard bad things about their service. I am interested in a complete touch screen Blackberry and am wondering if Verizon is set to get the Blackberry Storm 3? I heard they were and then heard it was cancelled?! Anyone know? Thanks!

Verizon Wireless will have a lineup of new devices for release for our customers. For more information you can go to the Contact Us and sign up for Email Notifications. This will provide you with new on new release for products through Verizon Wireless. Here is the link to sign up for email.
http://www.verizonwireless.com/b2c/myaccount/selfserve.jsp

How to get the file content after uploading file

Hello everyone!
I have a question. Anyone can provide an example code by jsp that getting the uploaded file content after user uploading a file?
Your help is highly appreciated!!!

My experience is you need to do it twice: first read it to a StringBuffer and readline. Then write the file to server. See the code below
MultipartParser parser = new MultipartParser(request, 10000000);
Part part = null;
FilePart filePart = null;
File uploadDir = new File("/Uploads/");
if (!uploadDir.exists()) {
uploadDir.mkdir();
while(true){
     part = parser.readNextPart();
     if(part == null)
          break;
     if(part instanceof FilePart){
          filePart = (FilePart)part;
          filename = filePart.getFilePath();
          //You can do one of the following option. Here is read line to a buffer and display to screen
//if (filename != null) {
          //Do not store the file to server machine.
//long size = filePart.writeTo(uploadDir);
// System.out.println("The number of bytes written is "+size);
          reader = new BufferedReader(new InputStreamReader(filePart.getInputStream()));
          String newline=reader.readLine();
          if(newline!=null)     {
          reconcileContent.append("<table border=\"1\"><tr><th>Destination ID</th><th>File ID</th><th>Rept Date</th><th>As of Date</th><th

Getting the html content before browser displays it

Hi,
I have a nagging problem which i am trying hard to solve.
I have a jsp file which gets hundreds of rows from database. I want to capture the html content before the browser displays that. How can I achieve it. ?
Please tell us the solution as soon as possible. we have stopped the work.
Thanks & Regards,
A S N Murthy
[email protected]
[email protected]

Hi !
continuing with my previous mail...
Is it okay with you if you use save the Data to be rendered in an XML ? (if you just need all the data).
You've written you will have "hundreds of rows from database".
In case you think of saving the data in an XML format, you can have all that data in a structured manner on the server side. And later you could use the XML file in any way you want. i.e. convert it into an html using xalan, etc. or use the XML file to access the data instead of a DB transaction all over again...
I guess this might be a better approach than saving the HTML that will be generated by the JSP.
Anyway, it depends on your requirement.
regards,
Rahul C Tiwary

MSG in HD, Verizon fighting to get the HD content

Similar Messages

Maybe you are looking for