Mss cannot launch form

Hi
We just installed & configrued MSS business package and under the team workset when I click Start Processes, under HCM Processes and Forms, I get the process screen and I'm able to select an employee from the Org. unit but when I click on Start Process, there is no response.
When I try this under HR Admin role it works just fine. Any reason why I'm unable to launch start process (HCM forms) under a manager role? Please advice..thanks

check all the traces st22(error) ,su53(authorisation) and put external breakpoints in the application
Thanks
Bala Duvvuri

Similar Messages

Forms 6i Menu Items not Lauchning (FRM-40010: Cannot read form...)

Sorry for the newbie issue - I just haven't been able to figure this out...
I inherited maintenance of a old Oracle Forms Application, I was told it was version 5. And all the source modules were appended with "v05" like form1_v05.fmb, etc. I since discovered that when the users launch it they run against the forms 6i run time - so I guess this means it is actually a forms version 6i application.
The App has about 20 forms, 20 reports and a menu - and no project.
I copied all the source files into a working directory, then I created a project with the project builder using the "use all files in the current directory".
When I run the app ( by drilling down to this app's "logo" form - a splash screen contain our company logo, and a Menu structure it runs fine.
But just about every menu item I attempt to select ( i.e. MENU->Catagory1->OrderForm or in my case something like MENU->Inbound->Entry/Maintenance) results in no new form launching and the status bar contains the error message like "FRM-40010: Cannot read form order_v05.fmx"
In the above example the project does contain a order_v05.fmb, and it compiles fine ( in fact a project "build all" generates no errors or warnings ) - my single working directory contain all the source modules ( like fmb's, rdf's and mmb's) and compiled versions ( fmx's, mmx ) . Specificlly the order_v05.fmx is also there.
So why can't the app find the compiled form compiled in the same project and located in the same directory?
I also see several ERR files but the only thing the err files contain is a whole lot of lines saying things like " Compiling POST-FORM trigger on form... No compilation errors."
Any help getting this beast to run would be appreciated.

I may have a clue as to what is causing the issue, but don't know how to fix it.
I started poking in the menu items, and the child menu item that is supposed to do something runs some "Menu Item code" like this:
begin
hide_window('DLG_MAIN');
CALL_FORM( 'out_order_v05.fmx'
, no_hide
, do_replace
, no_query_only
, no_share_library_data );
show_window('DLG_MAIN');
end;I made a NEW root menu item, with a new child menu item and set it's "Menu Item code" like this:
begin
hide_window('DLG_MAIN');
CALL_FORM( 'C:\Data\_OraFroms\ITFS_V05\order_v05.fmx'
, no_hide
, do_replace
, no_query_only
, no_share_library_data );
show_window('DLG_MAIN');
end;And when I made this change, my new menu item launched the form, but the original one did not ( notice the only difference is my new menu item gives a fully qualified path to the file name ).
So it looks like my project is clueless as to it's own home directory - anyone know how I clue it in?

Resetting parameters in the Report Launch Form (qms0012f)

We ran into the problem today that the parameters in the Report Launch Form cannot be reset if they have no default value defined against them. In our situation this proved to be quite confusing and annoying for our end users, so we investigated the logic in the Headstart code and created a very simple solution: we added one character to the code in the qms0012l library. (package qms$param, procedure check_par_value.
For the long story, see http://technology.amis.nl/blog/?p=925
best regards,
Lucas

Gerard,
"when using the LOV query (through Headstart Foundation Application) the user is forced to use the LOV
and is not able to fill in the parameter field (field protected against update). "
This behavior is intentional. The reason for this is that with Hsd6i, we added a display value that is different from
the actual value of the parameters. However, in order not to break applications developed with older releases
of Headstart, the LOV still lists the actual value is still listed first in the lov query. Since the first field in the LOV
is not the field displayed on the screen, you cannot set Validate in LOV to true. So, the only option is to force
users to use the LOV to enter data. If you do not have compatibility issues with older applications, you can
set Validate in LOV to true and change all your LOV queries to put Description first and then value.
"If I use the LOV, Value or Description width fields they generate an On Off behaviour. The values you
specify are not important. When specified the LOV becomes screen wide, disregarding the specified
widths. When cleared the LOV returns to it's initial behaviour. "
I suspect this might be a new forms bug. I've logged a Headstart bug, just in case we can find a workaround.
"The manual describes the use of GLOBAL variables for Default Value and Description.
So far :
the code for the default value will never work
name_in(l_default_value)
should be
name_in(substr(l_default_value,2))
in order to remove the colon.
The code for the Default Description is totally absent."
I have also logged a Headstart bug for this. We will need to investigate it. Certainly, the mechanism is working
correctly, so I'm not sure what is going on here.
Regards,
Lauri

Mail cannot launch because it says Home Driectory is full? It is not full!!

Hi There:
I have two users on my computer and for some reason I cannot launch my mail program on one of them. Both users are listed as administrators and I have 2 hard drives installed using a firmtek controller card. The first drive where the OS is installed is an 80Bg drive with more than 57Gb available.
When I launch Mail on the first user ut says:
Mail cannot update your mailboxes becasue your Home Directory is full. You must free up space. Delete unnecessary files or documents. The thing is I have tons of space. The other user I can launch mail with no problems. I do have multiple mailboxes set up with the mail program that has the issues.
Please advise
Thanks
W

Hi Cyclops Images.
Corruption of ~/Library/Mail/Envelope Index is known to cause this bogus error message in Mail, even when there is enough space available on disk.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
It opens and then just crashes after a few seconds of white screen.
Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
Andreas

The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
So what we have:
1) Music app does not launch (white screen then close)
2) About screen crashes (I guess once it tries to calculate music space)
3) Spotlight does not show any results (no care what I set to search in in the preferences)
4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
5) Podcast app does not launch
I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
Things to try:
- reset all preferences and content
- reinstall ios7 with itunes from scratch
- switch to windows phone

Cannot add form fields in document

Acrobat Pro version 9.1.2
Windows XP SP 3
I have a document that I cannot add form fields to. When I try I get a message that says "You cannot edit the file as a form due to its security settings.
When I go to Advanced->Security->Show Security Properties. The security method is set to No Security and everything is "Allow" under the Document Restrictions Summary.
Where is there a security issue?

Lori,
How did you identify the PDF/A option? I am just curious for my future reference. I could not find it.
==================
Rupey,
The fonts are not embedded and that may also be something to address. A lot of these issues may be related to the 3rd party product used to create the PDF.

I cannot launch bridge from photoshop cc 2014

I cannot launch bridge from photoshop cc 2014

If you have downloaded and installed Bridge CC and it worked with Photoshop CC,
a common reason for this happening in CC 2014, is that you might have uninstalled Photoshop CC. If that's so, you need to reinstall Photoshop CC.
Gene

Cannot launch Java Report Panel

I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan

I am having the same problem and I don't see an answer here. I have uninstalled every instance of java and restarted my computer, then installed the one suggested here: Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine. (the Java Virtual Machine was a link). Restarted again, tried again, same error. On the sun page, I tested my java installation and it works fine. I have checked that java is enabled in both IE and Firefox and I still get this error in either browser. I am using Windows XP.
Upon comparing my computer with my coworker's java configurations, we found that she has a certificate called "Business Objects America" and I don't have that. Could that be the problem, and if so, where can I get that certificate? There was no active X question as I would have expected to see asking to run active X or not. I can't find any certificate downloads on your site at all.
Please advise ASAP because I need to use this Web Intelligence Reporting and I cannot get in.
Thank you.

After a download update 4.0, I cannot launch. Message says I need to reboot to complete a previous update. I rebooted 5 times to no avail. What now?

After a download update 4.0, I cannot launch. Message says I need to reboot to complete a previous update. I rebooted 5 times to no avail.I have tried searching for xpicleanup.dat to no avail as suggested. What now?

I was able to get live chat support to solve the problem in my post. It worked immediately. Here is what I was told to do. I needed to perform a clean installation Hopefully, it will work for you, too.
"To perform a clean installation, first close Firefox completely. (This chat window
must be closed if it's in Firefox) Then, rename "Mozilla Firefox" to "Old Firefox".
(On 32-bit Windows, this is C:\Program Files\. On x64 Windows, this is
"C:\Program Files (x86)". On Mac, Firefox is in /Applications) Finally, re-install
Firefox normally from http://www.firefox.com"
Since I had already downloaded 4.0, I just went to my download file after renaming the file and ran it.

Cannot save form error after form has been created

I've created a form and fucntions well.
It has been saved as a interactive pdf.
When people with just the acrobat reader open the file and click anywhere on the form a window pops up stating that
" you cannot save form..." then the OK button appears
You are able to enter data into the fields and print, but can only save the form as a blank copy.
Any help would be much appreciated.

You need to reader enable the form in Adobe Acrobat. Click on Advanced >
Enable Usage Rights in Adobe Reader and Click Save Now. You can then save a
reader enabled version of the form and users will be able to save their data
in the form.

Cannot see form fields on EBay and Ad trader sites

cannot see form fields on EBay and Ad trader sites. when asked to fill a form with item details the boxes that you have to fill in are missing. using Firefox 3.6.2. i have contacted Ad trader with the question but have got no replies.
i have to use Internet Explorer to see them. does anyone have the solution to my problem? i hate explorer so much and Firefox is so quick i use it as my main browser.
== URL of affected sites ==
http://http://www.adtrader.co.uk/

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Error in MSS Report (Using MSS Reporting Launch Pad)

Hello,
I'm currently using the convert manager's desktop data to MSS report launch pad for the portal.
When trying to run the report in MSS, I'm getting the error below:
"Error in Manager Self Service. When calling the report, the following error occured. Error when executing query Z_ABCD." This is from an SAP Query report and I could not determine what caused this error.
Have anyone encounter this and if you are able to resolve it?
Any information would be greatly appreciated.
Thank you,
Tam Ly
County of Sacramento

hi,
Go to transaction RSCUSTV27 and check if any standard template is maintained.
Use
In this activity you can make the following settings (for systems with a Release higher than SAP BW 3.x):
You can set your own Web template as the standard Web template for ad hoc analysis.
You can set your own Web template as a standard Web template for BEx Broadcasting.
You can set a Web template that is used during BEx Broadcasting for queries for generating documents.
You can specify a Web template that is used during BEx Broadcasting for enterprise reports.
You can set your own Web template as a standard Web template for reports.
Standard settings
The delivered standard Web template (0ANALYSIS_PATTERN) is used for ad hoc analysis.
The delivered standard Web template 0BROADCASTING_TEMPLATE is used for BEx Broadcasting.
The delivered standard Web template 0QUERY_TEMPLATE_BROADCASTING70 is used for broadcasting queries.
The delivered standard Web template 0REPORT_TEMPLATE_BROADCASTING is used for broadcasting reports.
The delivered standard Web template 0REPORT_DEFAULT_TEMPLATE is used for executing enterprise reports.
Activities
To set your own Web template as a standard Web template for ad-hoc analysis, enter the technical name of the Web template under Ad-hoc Analysis. If you do not specify anything, the delivered standard Web template (0ANALYSIS_PATTERN) will be used for ad-hoc analysis.
To set your own Web template as a standard Web template for BEx Broadcasting, enter the technical name of the Web templates under Broadcasting.
To set your own Web template as a standard Web template for BEx Broadcasting for queries for the generation of documents, enter the technical name of the Web templates under Query Precalculation.
To set your own Web template as a standard Web template for reports, enter the technical name of the Web template under Enterpr. Reports.
Note that if you change settings, you have to restart the J2EE Engine before the changes become effective.
Regards,
Kams

Unable to launch form in oracle ebiz 12.1.3 multinode (shared appl_top)

Hi,
I am getting below error while launching form. Oracle ebiz R12.1.3 multi node application configured in shared appl_Top on linux x86-32 bit.
I getting this error only on secondary application node.
load: class oracle/apps/fnd/formsClient/FmsLauncher.classor not found.
java.lang.ClassNotFoundException: oracle.apps.fnd.formsClient.FormsLauncher.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class oracle/apps/fnd/formsClient/FormsLauncher.class not found.
java.lang.ClassNotFoundException: oracle.apps.fnd.formsClient.FormsLauncher.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class oracle/apps/fnd/formsClient/FormsLauncher.class not found.
java.lang.ClassNotFoundException: oracle.apps.fnd.formsClient.FormsLauncher.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Regards,
Raj

Are you using loadbalancing or SSL ? Did this ever work before ? If so, what has changed ? How are you determining you are on the second apps node ? What are the client and browser versions ?
Pl see if these MOS Docs are relevant
FormsLauncher.class Not Found Error When Attempting to Access Forms in Applications (Doc ID 291698.1)
Load: Class Oracle/Apps/Fnd/Formsclient/Formslauncher.Class Not Found. (Doc ID 373736.1)
Formslauncher.Class Not Found When Failing Over Using DNS Round Robin Load Balancing (Doc ID 604040.1)
Can't Launch Forms in E-Business when accessed via VPN: Formslauncher Notinited (Doc ID 471120.1)
HTH
Srini

Outlook 2010 cannot provide form scripting support

I have followed two workarounds and fixes for Office 2010 in a terminal services environment. One was to copy a .dll file to the terminal server and the other was to remove a registry entry. Both workarounds fixed the problem temporarily,
but it continues to show up. When a user opens some email messages they receive a warning that "Microsoft Outlook cannot provide form scripting support. This feature is not available. For more information, contact your system administrator."A+, MCP, MCSA, MCSE, Security+

Here is what I did to enable VB scripting for Outlook 2010.
1.
Determine the GUID for Office 2010.
In the Registry, go to
HKEY_CLASSES_ROOT\Installer\Features. Search for
“OutlookVBScript”. I found it at:
HKEY_CLASSES_ROOT\Installer\Features\00004109110000000000000000F01FEC.
In the Registry, for an x86 server go to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products,
or for an x64 server, go to
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\Common\InstalledPackages (the first one)
and select the key where you located “OutlookVBScript”.
On my server, it is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\00004109110000000000000000F01FEC
When I select it, this is what I see:
DisplayName “Microsoft Office Professional Plus 2010”
InstallSource, ModifyPath and UninstallSring all show the Office 2010 GUID as
{90140000-0011-0000-0000-0000000FF1CE}
2.
Install VBScripting for Outlook.
My commands to install VBscripting for Outlook are therefore:
change user /install
msiexec /i {90140000-0011-0000-0000-0000000FF1CE} ADDLOCAL=OutlookVBScript /qb
change user /execute
Note: After installing VBscripting for Outlook, “OutlookVBScript”at
HKEY_CLASSES_ROOT\Installer\Features\00004109110000000000000000F01FEC changed its value from “OUTLOOKFiles”
(where the box glyph at the beginning appears to be a minus or dash in the Registry editor) to “OUTLOOKFiles”.

Cannot launch Camera Raw in PSE 8

I have PSE 8 with the Camera Raw 6.2 plug-in. The program works perfect exept that I cannot launch the Camera Raw converter. When I open a RAW-file in the editor or via the organizer, then the file just opens in the Editor mode. No raw converter... I can make a full photo-edit in the Editor. But why can't I open the Raw-converter?

I am on vacation. I will get back to you when I am back.
All the best,
Lars

Mss cannot launch form

Similar Messages

Maybe you are looking for