MSVC V5.0 IDE and CINs - custom build ??

Hi everyone,
does anyone know how to solve the "custom build" problem under NT?
When I try to build the LVS-file Visual stops at "performing custom
build step" with an error.
I've read the CIN reference manual, NI's knowledge base article
1F3ARTNV, MS's knowledge base article Q191495 and I've tried copying
various files to directories without long file names (just think about
it... Windows NT can't handle long filenames...).
I'd like to avoid postprocessing the DLL manually (so sad, so sad)!
TIA
Bernhard
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Ray;
For some strange reason sometimes the custom step cause a lot of troubles when implemented in VC++. I created a small VI just to implement the custom step. You can downloaded from here:
http://www.visecurity.com/tools.shtml
Look for the VI called CIN Custom Step
I hope this helps.
Regards;
Enrique
www.vartortech.com

Similar Messages

Ree scrolling ideas and how to design in muse

hey i am wondering how to use the adobe muse scolling idea and how to build it? do you make this inside adobe muse or use another software like photo shop. i am still in the middle of designing my own web site. i am almost done. just making some changes. . i am thinking either one or two things. for scrolling.
1. use it for my photo gallery on both home page and portfoilo.
2. or use it for connecting pages together.
this is in the design phase. see i am not a strong designer. i am more of a photographer.
any ideas?
i am always getting stuck on the gallery part. see i am wanting to have alot of galleries. and thats what i am getting stuck at. i am liking the light display gallery. but the idea is to have it all on one page. thats the problem and keeping it simple. so i though scolling would be cool to add.
i have tried the lightbox display widget, presentation widget, and slide show widget. but i am wanting to use the them all.
thanks

Hi Rajendra,
While designing master data objects, you have to check whether you will get data from two source systems.
if you are getting data from two source systems and you don't want to overwrite, you have to assign 0SOURCESYSTEM as compounding object to characteristics
check the below thread
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/handling-overlapping-master-data-in-sap-bi-from-multiple-source-systems-4204477
Regards,
Venkatesh

15-inch MacBook Pro w/ Retina Custom Build Delay

On 11/25 I ordered a custom build 15-inch MacBook Pro with Retina display 2.6GHz and 1TB PCIe-based Flash Storage.
Item still has not been shipped any idea as to the hold up? Is it the Flash storage?
Be intereseted in hearing from others about their backorder situation.
Thanks

Thanks nbar, wish I could it was ordered as a lease through my company's supplier SHI and their 3rd party apple company, twice removed from me. SHI says they have no way of giving me the apple order number which I find hard to believe. All the other apple accessories have arrived.

UITableViewCell and the Interface Builder

I'm trying to use the Interface Builder to create a UITableViewCell but am having problems.
I can create the UITableViewClass in my .xib file, connect the reference outlet and reuseIdentifier using the inspector. The problems occurs when I try and render the cell with this method...
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
Since the interface builder creates the TableViewCell automatically, I should be able to call...
UITableViewCell *cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:@"priceCell"] autorelease];
..from inside the tableView:cellForRowAtIndexPath method and get that cell instance. But none of changes (Color, accessory view, etc...) I made to the table view come through.
Has anyone got UITableViewCells created in the interface builder to work?

Just an update to inform people of some of my findings.
I had originally, before gkstuart's post, had added a UITableViewCell instance as a child of my view in IB. I then tried to use the cell via an IBOutlet in the UITableView in my view. This is when I was getting a completely blank screen when running my application. I then adopted gkstuart's idea and created a cell factory class, but without thinking, I used the same cell instance on each call to my 'newCell' method. Once I updated the 'newCell' method to load the nib file on each call to 'newCell' everything seems to work fine. As a note, the nib file loaded by 'newCell' is a simple nib file containing only my custom cell definition. It does not contain any views. Gkstuart's method of loading custom cells is unfortunate, because you can't seem to use the reusable cell theory when working with cells defined in IB. This is obviously something that needs work on Apple's side.
As a test, I removed my custom cell definition from my original view nib. I then added a new top level instance of UITableViewCell, by dragging the UITableViewCell item to the window with the File Owner icon. After updating the custom cell definition with the appropriate class and outlets, I tried my original method again. I no longer get a completely blank screen, but it still doesn't work right. I now get a single cell in my table view, which happens to be the last cell in the list. When looking at it with the debugger, dequeueReusableCell never returns my cell instance so I am reusing and returning the same cell for each call to 'cellAtIndexPath'. I tried to manually call the cells 'prepareForReuse' method but this didn't seem to have any affect.
So at this point, I am going to continue with the cell factory methodology until Apple either fixes the current problem or informs people on the proper way to use IB with custom UITableViewCell's.
As a side note, I am going to start blogging about my experiences with the iPhone SDK over at iphonesdktrialsandtribulations.blogger.com.

AP payment custom build program

I have a requirement to create an AP payment file format specific to a Bank (Oracle 11i). The bank accepts payment file in 2 different formats.
Format X: to make payment in its own country (Netherlands). i.e. payment for invoices where supplier bank is in Netherlands.
Format Y: to make payment in all other counties (except Netherlands).
Standard Oracle Payment SELECT/BUILD program selects Invoices for all countries (for the param given: pay batch, currency..)
If I create two payment FORMAT programs; one to pick up the Invoices for payment in Netherlands and another to pickup invoices for payment in all other counties; will it be fine ?
OR
I have to create a custom BUILD program to build a payment batch considering counties of supplier (and payment FORMAT program to create the flat file)
Help Appreciated !!
Thanks
SM
Edited by: user13294561 on 27-Sep-2010 00:22

Define 2 concurrent program to format batch records and create payment file
(or a single program with technical handling of batch type)
Define 2 automatic payment format program
Sample
NL Foreign Payments Program
NL Domestic Payments Program
Define 2 electronic payment formats,
Sample
NL Foreign Payments
NL Domestic Payments
Select each of your payment format program in this setup
Go to Internal Bank Account Setup
Payables Document
Create 2 payables document
EFT DOMESTIC,
EFT FOREIGN
Payment Format,
Select the format programs
Create Batch
Hope this helps
Bilal SARIOZ

How to update apps in a ZTE Open (with FFOS 2.0 custom build)?

I have a ZTE Open I regularly update trough custom builds. In particular, I updated it to the 2.0 version by:
BRANCH=v2.0 VARIANT=user ./config.sh inari
BRANCH=v2.0 VARIANT=user ./build.sh
The operation has apparently been successful, and by the test apps being missing I guess that I really built and flashed the user variant.
Now, I do not expect system updates to work, as I heard that the inari update channel has been shut down.
Though, I would expect it to at least automatically update the third-part apps from the Market store. This does not seem to happen: I have outdated apps (Loqui IM v3.1, in particular) but the "Check now" button from the Settings has no effect (it says "Checking for updates", but nothing else happens).
Moreover, I do not remember of having ever received an update with previous build, so I guess it may be not a problem with this particular build.
Is there something I can do about it?

Are other ZTE Open users with a custom build experiencing the same problem? Do you receive any app update at all?
I can't tell whether there is a problem in my build, in some setting or in the device.

Best IDE and how-to create HTML for a swing Applet

Can you help me out? I've been using, and teaching with the old Symantec VisualCafe product from long, long, ago. It still works fine & I can even use it to build JFC/Swing Applets etc. But a few things have occurred. For one, a way back, Symantec sold VisualCafe to WEBGAIN - who now has gone out of business and sold it to a company called TOGETHERSOFT - who doesn't support it any longer.
This isn't really a big deal to me, because I can still build and deploy applets that are pre-swing easily enough. (as can my students)
HOWEVER... I'd like to be running with the LATEST Java (I think it's 1.4.01) and I'd LIKE to use whatever is the best development environment I can use - especially one I can recommend to my students. Do you know what that should be?
What's more, I'd still like to take some JFC/Swing created applets (even if compiled with the older VisualCafe IDE) and generate the HTML to allow 1.4 enabled browsers to run them (this is the case for the schools versions of Explorer and Netscape). Now, the HTML I have INSTALLED for the students used the HTML converter - back in 1.2 to produce the HTML at the bottom of this. This code no longer works now with current browsers. Do you know HOW one makes a jfc/swing compiled applet run on the latest browsers?
Any help or direction you can give would be appreciated.
thanks,
Bobby Berns
[email protected]
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = 756 HEIGHT = 396 codebase="http://java.sun.com/products/plugin/1.2/jinstall-12-win32.cab#Version=1,2,0,0">
<PARAM NAME = CODE VALUE = "lottery.class" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.2">
<COMMENT>
<EMBED type="application/x-java-applet;version=1.2" java_CODE = "lottery.class" WIDTH = 756 HEIGHT = 396 pluginspage="http://java.sun.com/products/plugin/1.2/plugin-install.html"><NOEMBED></COMMENT>
</NOEMBED></EMBED>
</OBJECT>



Bobby,
It's been a while since I've used the HTML Converter, but if I had to guess I'd say you need a newer version than what you have. Also, doesn't the converter allow you to choose which JDK you want to use (in which case you could select 1.4)? Again it's been a while so bear with me. Another option would be to put all the Swing classes into a .jar file (typically called swingall.jar) on your server and include that file as an attribute in your applet tag like this:
<APPLET CODE="yourApplet.class" ARCHIVE="swingall.jar">
This way you don't have to use the Java Plug-in, however the initial download time of the .jar file can be significant.
As for an IDE, I've always been happy using a text editor like UltraEdit. However, I've heard good things about Forte, and hey, it's free!
Regarding Christina's post, that solution will only work if the Applet does not use Swing components (and Bobby specifically said it does). By using the <OBJECT> and <EMBED> tags, rather than the <APPLET> tag, you force the browser to use the Java Plug-in (rather than the browser's default JVM).
Hope that helps,
- Sheepy

Pricing procedure and CIN master

Hi MM Gurus,
I need one simple procedure for creating Pricing Procedure.........and ......creating Excise details and relating and can anybody show how the pricing procedure and excise (CIN) is related .
Regards,
Girish.C.M

Hi,
CIN Setting:
Check Calculation Procedure
In this activity, you can check and, if necessary, change existing procedures for tax calculation.
Standard settings
Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
Note
In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
Recommendation
If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
Activities
If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
Procedure (pricing, output control, acct. det., costing,...)
Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
Example
Procedures are used, for example, in the following applications:
· Pricing in sales and distribution
· Applying overhead in Product Costing (costing sheets) and for CO internal orders
· Calculating accrued costs in Profitability Analysis
· Output control (printed confirmations, EDI messages, electronic mail)
· Account determination
· Calculating taxes on sales/purchases
· Calculating accruals in Cost Center Accounting
· Pricing for resource planning
Definition: condition type
Controlling (CO)
A distinction, in overhead calculation, is made between:
· Base condition types, which determine the object for which the overhead is to be calculated
· Overhead condition types, which define the percentage overhead to be applied
In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
Real Estate Management (RE)
An exact definition of a condition that specifies the amount paid for a specific service.
Condition types include:
· Basic rent
· Advance payment for operating costs
· Pest control
Sales and Distribution (SD)
A characteristic of a condition.
For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
Treasury (TR)
A characteristic of a condition used to classify financial transactions.
Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
Return ->
Definition: condition_type
Condition type
The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
Access sequence
With the access sequence you define
· the condition tables used to access the condition records
· the sequence of the condition tables
· which field contents are the criteria for reading the tables
Assign Country to Calculation Procedure
In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
Requirements
Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
Activities
1. Assign a procedure for tax calculation to every country with which your company has business dealings.
2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
Check and Change Settings for Tax Processing
In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
· Tax type
Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
· Nondeductibility of tax amounts
For this, tax amounts are marked as not deductible.
· Posting indicator
Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
· Tax not relevant to cash discount (Not discount relevant)
This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
Standard settings
Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
Recommendation
Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
Activities
If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
Note
You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
Internal processing key
The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
The processing keys are defined in the system and cannot be changed by the user.
Definition: posting key
Financial Accounting (FI)
A two-digit numerical key that determines the way line items are posted.
This key determines several factors including the:
· Account type
· Type of posting (debit or credit)
· Layout of entry screens
Return ->
Definition: posting_key
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each.
Definition: excise registration
Financial Accounting (FI)
An entity in India that is entitled by law to produce any goods liable to excise.
Each entity is assigned its own excise registration number.
Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
Return ->
Definition: excise registration
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Definition: excise group
Financial Accounting (FI)
A unit within an excise registration, in India, which keeps its own set of excise records.
Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
Return ->
Definition: excise group
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
· Define excise series groups based on type of outgoing document
· Assign series group to excise registration ID
· If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
· If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
Maintain Postal Addresses
Use
In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
You can then define a default local excise department for each excise group and a default customs department for each series group.
Definition: ARE-1 document
Logistics - General (LO)
A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
The form exempts them from paying excise duty when they remove the goods from their premises.
Return ->
Definition: ARE-1 document
Definition: ARE-3 document
Logistics - General (LO)
A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
The ARE-3 states what goods are being removed and which deemed excise license covers it.
Return ->
Definition: ARE-3 document
Maintain Subtransaction Type with Text
Sub Transaction Type
Sub transaction type is used for multiple purposes
Subcontracting:
It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Excise removals
Sub transaction type is also used for determining the accounts while doing excise removals.
With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
· If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
· If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Definition: condition-based excise determination
Logistics - General (LO
A method that the system uses of determining excise duty in India.
This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
Return ->
Definition: condition-based excise determination
Definition: formula-based excise determination
Logistics - General (LO)
A method that the system uses of determining excise duty in India.
This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
Return ->
Definition: formula-based excise determination
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
· Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
· Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
· Specify the conditions in the sales order that are used for excise rates.
· Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
Definition: basic excise duty
Financial Accounting (FI)
The main type of excise duty in India.
It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
Return ->
Definition: basic excise duty
Definition: additional excise duty
Financial Accounting (FI)
A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
Return ->
Definition: additional excise duty
Definition: special excise duty
Financial Accounting (FI)
A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
Return ->
Definition: special excise duty
Definition: cess
Financial Accounting (FI)
In India, a tax on the manufacture of certain products, mostly foodstuffs.
Return ->
Definition: cess
Definition: countervailing duty
Financial Accounting (FI)
A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
Return ->
Definition: countervailing duty
Define Tax Code for Purchasing Documents
Use
In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities
Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
Sales Tax Code
The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
Procedure
For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
Note
You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
Definition: tax code
Financial Accounting (FI)
A two-digit code that represents the specifications used for calculating and displaying tax.
Examples of the specifications defined under the tax code are:
· Tax rate
· Type of tax (input tax or output tax)
· Calculation method (percentage included or percentage separate)
Return ->
Definition: tax_code
Definition: tax rate
Financial Accounting (FI)
The percentage rate used to calculate the tax amount.
Return ->
Definition: tax_rate
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
· For taxes on purchases, use the condition types contained in the tax procedure.
· For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
Maintain Chapter IDs
Use
In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
Definition: chapter ID
Logistics - General (LO)
The number given to a material in the schedules of materials published by the government of India.
The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
Each material in the schedule is assigned its own identification code, called "chapter ID."
Example
The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
Return ->
Definition: chapter ID
Assign Users to Material Master Screen Sequence for Excise D
Use
In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
Standard settings
Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
Activities
1. Double-click User Screen Reference.
2. Assign all users who need to see the excise duty information to the screen reference IN.
Example
Name Screen Reference
MISHRA IN
Screen Sequence Number
Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
Note
When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
Dependencies
You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
Screen reference depending on the user
Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
Definition: user master record
User and Authorization Management (BC-SEC-USR)
Record that contains important master data for a user in the SAP System.
The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
Return ->
Definition: user_master_record
Define Form Types
Use
In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
Example
· Form type: CT3
· Form description: Concessional tax form
· Status: Receive
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
· VS1 (basic excise duty)
· VS2 (additional excise duty)
· VS3 (special excise duty)
· VS5 (sales tax setoff)
· MWS (central sales tax)
· MW3 (local sales tax)
· ESA (service tax)
· ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hold account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
· Excise group
· Company code
· Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
· Defined the G/L accounts
· Defined the excise groups
· Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Define Processing Modes Per Transaction
Use
In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
This way, you can tailor the transaction to what your users have to do.
Standard settings
The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
· J1IEX_C
This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
· J1IEX_P
This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
· J1IEX
In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
Activities
If the standard settings meet your requirements, do not do anything.
Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
2. In this activity, enter data as follows:
o Tcode: The transaction code that you have just created.
o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
o Active: Select this indicator to activate the setting.
Example
You might want to create a transaction that only allows users to display excise invoices.
Define Reference Documents Per Transaction
Use
In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
Activities
If the standard settings meet your requirements, you do not have to do anything.
Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
Definition: excise invoice reference document
Logistics - General (LO)
A document, in India, that you refer to when you enter an incoming excise invoice.
If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
Example
In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
Return ->
Definition: excise invoice reference document
Maintain Rejection Codes
Use
In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
Activities
For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
Specify Which Movement Types Involve Excise InvoicesUse
In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
Note
This option cannot be used for processing goods receipts without purchase orders.
Maintain Default Excise Groups and Series Groups
Use
In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
Activities
This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
Use
The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
Requirements
Before you continue with this activity, work through the following activities:
· Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
Maintain the Program, FORM routine, and the form for the output type.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
Enter the output device that you use.
Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
Maintain Movement Type Groups
Use
In this IMG activity, you group movement types together to form movement type groups.
Definition: movement type
Inventory Management (MM-IM)
A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
Return ->
Definition: movement type
Utilization Determination
Use
In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
You can either:
· Debit all the excise duty to one account
· Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
Example
If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
Acct name BED perc.
RG 23A BED account 50
RG 23C BED account 50
Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
Acct name BED perc. +
RG 23A BED account X
RG 23C BED account X
When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
Maintain Minimum Balances for Excise Accounts
Use
In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
Activities
Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
Specify SAPscript Forms
Use
In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
Standard settings
Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
Reg. name Lay. no. Form Tcode/Prog
RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
PLA 1 J_2I_PLA J_2IPLA
RG 23 D 1 J_2I_RG23D J_2IRG23
RG 1 1 J_2I_RG1 J_2IRRG1
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_3 J_2IRT12
The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
Number Ranges
You can maintain the number ranges for all CIN Number range objects using this transaction
Activities
Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
1. j_1iintnum
At an Excise group
1. j_1irg23a1
2. j_1irg23a2
3. j_1iRG1
4. j_1irg23c1
5. j_1irg23c2
6. j_1ipla2
7. j_1iintpr2
8. j_1irg23d
9. j_1irg1_t ( material level)
10. j_1iconpla ( if Consolidated PLA is used )
At Series group
1. j_1iexcloc
2. j_1iexcexp
3. j_1idepinv
4. j_1i57Fc ( 57F Challans )
Rewards if Helpful
regards
rb

Error during Custom Build - error PRJ0019: A tool returned an error code from "Performing Custom Build Step"

Hi All,
I was trying to develop C++ web service using GShop with Visual Studio 2005.I refered a tutorial :-
http://guruce.com/blogpost/hosting-webservices-on-windows-embedded-compact-windows-ce-using-gsoap .
AS per the tutorial i proceeded. But, i stuck-up when making a custom build with Helloworld.wsdl.Here is the output :
1>------ Rebuild All started: Project: HelloWorldWebService, Configuration: Debug Pocket PC 2003 (ARMV4) ------
1>Deleting intermediate and output files for project 'HelloWorldWebService', configuration 'Debug|Pocket PC 2003 (ARMV4)'
1>Performing Custom Build Step
1>'D:\Test' is not recognized as an internal or external command,
1>operable program or batch file.
1>Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
1>Build log was saved at "file://d:\Test Code\HelloWorldWebService\HelloWorldWebService\Pocket PC 2003 (ARMV4)\Debug\BuildLog.htm"
1>HelloWorldWebService - 1 error(s), 0 warning(s)
========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
As given in the tutorial i kept my custom build command line as : -
$(SolutionDir)\gsoap-2.8\gsoap\bin\win32\wsdl2h.exe -s $(InputPath) -o $(ProjectDir)$(InputName).h
and outpouts : $(InputName).h
I kept GSHOP in the project filder :- D:\Test Code\HelloWorldWebService
Kindly help.
Jyotiranjan

Hi Jyotiranjan,
I’m glad to hear that you got it working.
Thank you for sharing your solutions
experience here. It will be very beneficial for other community members who
have similar questions.
Best regards,
Lucy
Lucy Liu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

"Performing Custom Build Step"-Reg.

Dear All,
I am the new person in Plug-In creation, now i start the "Basic-Dialog" program and compile in VC++ software, but they shows the below error:
'odfrc' is not recognized as an internal or external command,
operable program or batch file.
Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
So please any one can help me!....
Regards
T.R.Harihara SudhaN

Dear Charles Anderson
Many Thanks for the informations and useful guide,
and please help me!
I added the below as you told paths:
"Tools | Options. Go to Projects, then VC++ Directories. In the "Show Directories for" dropdown list, select "Executable Files". Add the directory containing odfrc"...
First I clarify to you... I am using the MicroSoft Visual Studio. NET 2003, using the VC++ compiler...
I am adding the ODFRC file in the executable files, But same error shown in the Output Window. So please give me the solutions.
I am waiting for your solutions.
Thanks & Regards
T.R.Harihara SudhaN

Script crashes IDE and Flash Player but works in browsers

I'm building a game program and I've got a script that loads
an external swf, and then duplicates the clip for the user to play.
It worked until a few days ago when I reinstalled my OS (Mac OS
10.4.11) to fix an unrelated problem. The strange thing is that I
had reinstalled the browser plugin to fix a related problem. Now
the code works in the browser, but crashes the IDE and the Flash
Player every time. I called Adobe Support but they were no help
since it's "project related." I've reinstalled CS3 and Flash
itself, but nothing helps.
Here's the code that crashes:
// INITIALIZE LOADER AND ADD TO STAGE
var myLoader:Loader = new Loader;
addChild (myLoader);
myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE,
isLoaded);
// DUPLICATE CLIP WHEN LOADED
function isLoaded (event:Event):void {
event.target.content.width = 100;
event.target.content.height= 200;
// THIS IS THE LINE THAT CRASHES
var copyClass:Class =
Object(event.target.content).constructor;
var newThing:DisplayObject = new (copyClass);
addChild (newThing);
newThing.x +=50;
myLoader.load (new
URLRequest('coloring/coloring1.swf'));

See this cool mp3 xml player with visualization, playlist and
skins. Fully customisable. Vector.
http://flashden.net/item/mp3-xml-strongplayerstrong-with-visualization-and-skins-vectorise d/11851

How to set and save Custom Print Settings in Aperture?

How to set and save Custom Print Settings in Aperture
Hi,
I am printing 12x18" images on 13x19" sheets. I find it difficult to enter the 13x19" dimensions because each value jumps to another random value when I move to enter the second dimension. For instance 13 jumps to, say, 8.5 as I type 19 into the second box. Same with the sheet dimensions.
Also, when I finally get it all correctly, the margins don't set themselves automatically - which I would I expect.
Then, even though I save the setting by clicking Save Setting at the gear below, next time I turn Aperture on, it's all gone.
Any ideas? Thanks.
Raphael

For me, it is working with these settings, Raphael.
Does your image have a 12x18" aspect ratio? You may want to crop it to the desired aspect ratio before printing.
I can only test with Aperture 3.6 on Yosemite 10.1.

Mapping and querying Custom Objects for a Contact with REST Api

Hello All,
We are hoping to get some details on managing DataCard set through REST APIs. Our implementation goal is to create Contacts and add Custom object for each Contact, or to be precise, add a DataCard Set for each Contact.
At the moment, to associate a DataCard Set (or Custom Object) to an existing contact, we are supplying following custom object fields during creation of Custom Object:
new CustomObjectField
                                                                name = "MappedEntityType",
                                                                dataType = Enum.GetName(typeof(DataType), DataType.numeric),
                                                                type = "CustomObjectField",
                                                                defaultValue = "0"
                                                         new CustomObjectField
                                                                name = "MappedEntityID",
                                                                dataType = Enum.GetName(typeof(DataType), DataType.numeric),
                                                                type = "CustomObjectField",
                                                                defaultValue = "<ContactId>"
Is this the correct approach? This is Based on the information provided here: http://topliners.eloqua.com/community/code_it/blog/2012/05/31/eloqua-api-how-to-mapping-a-data-card-to-an-entity.
Would the REST API allow us to query the CustomObjects using the MappedEntityId value for later updates? If so, any pointers on how we approach that?
Thanks in ad.

Either the MappedEntityID field is not available or I do it wrong, Eloqua is ignoring the field and does not map the custom record with the unique Contact ID
{"type":"CustomObjectData","ContactID":"8829509","fieldValues":[{"id":"195","value":"[email protected]"},{"id":"220","value":"a0KJ000000387QvMAI"},{"id":"191","value":"001J000001OrL77IAF"},{"id":"193","value":"NowTV MPP"},{"id":"194","value":"8829509"},{"id":"196","value":"Andreas"},{"id":"197","value":"Wolf"},{"id":"198","value":"003J00000145lkBIAQ"},{"id":"210","value":"777666555"},{"id":"199","value":"gbp"},{"id":"200","value":"0"},{"id":"215","value":"0"},{"id":"201","value":"999111999"},{"id":"214","value":"111111"},{"id":"202","value":"222222"},{"id":"204","value":"now"},{"id":"203","value":"xmas"},{"id":"205","value":"no description"},{"id":"206","value":"test"},{"id":"218","value":"holidays"},{"id":"219","value":"PPV-0878545"},{"id":"213","value":"N"},{"id":"212","value":"myself"},{"id":"209","value":"now tv"},{"id":"192","value":"1417542120"},{"id":"207","value":"1417542120"},{"id":"216","value":"1417542240"},{"id":"217","value":"1417542240"},{"id":"211","value":"1417542240"}]},"MappedEntityID":"003J00000145lkBIAQ"}
Response
DEBUG|Response------{"type":"CustomObjectData","id":"81720","fieldValues":[{"id":"195","value":"[email protected]"},{"id":"220","value":"a0KJ000000387QvMAI"},{"id":"191","value":"001J000001OrL77IAF"},{"id":"193","value":"NowTV MPP"},{"id":"194","value":"8829509"},{"id":"196","value":"Andreas"},{"id":"197","value":"Wolf"},{"id":"198","value":"003J00000145lkBIAQ"},{"id":"210","value":"777666555"},{"id":"199","value":"gbp"},{"id":"200","value":"0"},{"id":"215","value":"0"},{"id":"201","value":"999111999"},{"id":"214","value":"111111"},{"id":"202","value":"222222"},{"id":"204","value":"now"},{"id":"203","value":"xmas"},{"id":"205","value":"no description"},{"id":"206","value":"test"},{"id":"218","value":"holidays"},{"id":"219","value":"PPV-0878545"},{"id":"213","value":"N"},{"id":"212","value":"myself"},{"id":"209","value":"now tv"},{"id":"192","value":"1417542120"},{"id":"207","value":"1417542120"},{"id":"216","value":"1417542240"},{"id":"217","value":"1417542240"},{"id":"211","value":"1417542240"}]}
Eloqua:
Name: PPV-0878545
Unique Code: a0KJ000000387QvMAI
Status Registered
Created Date 12/22/2014 12:44:49 PM
Mapped NO
Any Idea how to map this to a contact
Entity Type is Contacts
Entity Field is SFDC Contact ID

WebDynpro accessing custom-build EJB applications

Hi there,
I have a query regarding WebDynpro accessing custom-build applications deployed on web-logic server and J2EE servers.Following is the scenario.
There is central authentication mechanism deployed in J2EE server. GUI users (in EP) have to be authenticated through this application(EJB).
In EP, this remote call would happen through the WebDynpro. After successful authentication, calls will be sent to another Weblogic server.
Too many remote calls. How about the scalability & performance factors with WebDynPro?

HI,
Webdynpro and EP are almost same except coustomisation coming to picture in EP, why do you want webdynpro to EP to web logic, Just crate your UI in dynpro convert them to Iviews in EP through EP call wenlogic server/J2ee server i hope there will not be any hindarence to scalability or perfomance.
when it comes to remote calls after all your going to call weblogic through EP but dynpro UI will be as an Iview
I hope it helps you
in case if you need further details let me know
Regards
RK

Language Support: Custom Build/Debug actions

Hi!
I'm trying to develop a custom language service, but can't find a way how to register custom build action instead of default C# compiler. I followed this two (Language Service,
Basic Project System) walkthroughs, but unfortunately couldn't find any more additional and up to date resources.
I am pretty confident that of the problems lies in the line of code bellow, but don't know how to correctly change it to register custom tool or ideally method call on build action.
<Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
If someone could please point me in the right direction.
Thanks!

If your custom language doesn't use the C# or VB.NET compilers but your own compiler then you should provide your own MSBuild .targets and tasks.
MSBuild has a learning curve so I recommend to read some book or documentation. Then, examine the file Microsoft.Common.CurrentVersion.targets (C:\Program Files (x86)\MSBuild\12.0\Bin folder)
* My new blog about VSX: http://www.visualstudioextensibility.com * Twitter: https://twitter.com/VSExtensibility * MZ-Tools productivity extension for Visual Studio: http://www.mztools.com.

MSVC V5.0 IDE and CINs - custom build ??

Similar Messages

Maybe you are looking for