MTD based on Date Characterisitics
Hi Team,
We got two date characteristics i.e. Teco date and Labour date, based on the “Service order”.
We need to calculate MTD (actual and Prior year) by applying with this logic.
The calculation of MTD should be based on the Last TECO Date (Input Variable).
For example i.e. if I enter older date/month (not current date) [1/20/2014 means it should calculate for 1/1/2014 – 1/31/2014]
If the Input variable is current month’s date, then the MTD calculation should be = 1st day of month – Current Day.
For the above MTD calculation; we need to fetch the relevant Service orders and use it in the below final calculation.
The above same calculation logic should be applicable for MTD actual and prior year:
We don’t have any other Key figures involved except these date characteristics.
Final Calculation:
If Last Labour Date is blank, 0, else Last TECO Date – Last Labour Date (by individual line item).
Can anyone help me how to achieve this requirement?
Thanks
San
Hi San,
Hope you are working with DBM data.
1) Create a CKF(Service Orders Count) with a constant value 1 and select "Counter of all detailed Values which are not null or zero" in Exception Aggregation with a reference char as "Service Order"
2) Drag any KF for dummy purpose and restrict it with Teco date(User entry based variable). This will enable variable input screen in the report. Hide this KF.
3) Drag CKF(created above) and restrict with a new variable which is replacing with Teco Date variable. You can follow my exclusive blog to do it. You have to read just month from teco date. Only 6 length. Details are in my blog. Eg: Teco date: 23.04.2014, then you should read just 201404(nothing but 01.04.2014 to 23.04.2014). This is your MTD. Your second scenario also will work with this same variable. Suppose user enters 20.01.2014, then it will take 201401(which is nothing but 01.01.2014 to 31.01.2014)
How to derive Calmonth & Calyear from Calday easily
4) You can simply offset -1 for Prior year. Make a copy of above MTD KF and just apply offset -1.
5) Convert your both Date chars into KFs with Formula variables(replacement paths)
6) Create one more New Formula for Date difference and put Last Teco Date KF - Last Labor Date KF
7) Finally create a grand formula like below:--
( Last Labor Date KF = = 0 ) * 0 + ( Last labor date KF < > 0 ) * Date Difference KF
Hope my reply helps you.
Regards,
Suman
Similar Messages
-
Process Chain - How to make decision based on data in PSA and execute DTP
Need to create process in Process Chain, which will execute the DTP based on data in PSA.
Say we have two DSO A & B, both getting data from same datasource.
In process chain, we need to read data in one of the date field in PSA and make a decision, which DTP to get execute in process chain.
Say if date field contains year = 2000, than load to DSO A, if year is 2001, load data to DSO B.
Suggest the solution. ...Hi,
Tyr this steps.
1) Develop ABAP process types
ABAP report to read PSA data using function module
Trigger events based on year
event1 -> for even year data
event2 -> for add year data
2) Develop local process chains for each DTPs and schdule it with events mentioned above.
Do reply with comments. -
Batch Determination based on date of consig recieve
Hi,
I am getting problem when i am trying to do manual batch determination in the outbound delivery.
I have created a record in VCH1 based on customer/Material/Plant. In this i have maintained a sort rule also. what characteristaics i must use to make my batch determination based on customer consignment recieving date?
If i go in MSC3n with Material, Plant and batch data then in the screen ( table MCHA, MCH1) onlt data available is for ERSDA, LAEDA and LWEDT.
In delivery when i click on batch determination button. my Sort rule is not automatically determined. So i have to maunally entered my soirt rule but at the same time my qty proposal in the same screen is 1 which is nothing but
FORM CHMVS_001.
DATA: lv_line TYPE kondh-chasp VALUE '1'.
LOOP AT disqty.
CHECK lv_line <= no_of_split.
IF QUAN_TO_DIS > 0.
IF DISQTY-AVAL_QUAN > QUAN_TO_DIS.
DISQTY-QUANTITY = QUAN_TO_DIS.
ELSEIF disqty-aval_quan > 0.
DISQTY-QUANTITY = DISQTY-AVAL_QUAN.
ENDIF.
IF disqty-quantity > 0.
quan_to_dis = quan_to_dis - disqty-quantity.
MODIFY disqty TRANSPORTING quantity.
ADD 1 TO lv_line.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM
When i am taking characteristics LOBM_VFDAT for sort rule in Cu70 then i am not getting batch determination as i required even if i maintained Shelf expiry date in MSC3n.
Please suggest where i must look into so that my batch determination would be based on date of consignment recieved.. currently if it s taking based on max qty available in MMBE.
Regards
NitinI have already assigned sort rule in VCH1 but dont know which Characteristics i must assign for customer consignment stock on FIFO basis. Could you please tell me the characteristics for it which i must consider?
LOMB_VFDAT i have already tried but its not working for me.
Edited by: Nitin Agarwal on Oct 30, 2008 8:14 AM -
How to get the most current file based on date and time stamp using SSIS?
Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vvhi simon
i excuted this script it is giving error..
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
[System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
string file = Dts.Variables["User::FolderName"].Value.ToString();
string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
System.IO.FileInfo finf;
DateTime currentDate = new DateTime();
string lastFile = string.Empty;
foreach (string f in files)
finf = new System.IO.FileInfo(f);
if (finf.CreationTime >= currentDate)
currentDate = finf.CreationTime;
lastFile = f;
Dts.Variables["User::LastFile"].Value = lastFile;
Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv -
How to schedule the webi report based on data changes in the report data
Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
GauravHi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run -
How to display data from a recordset based on data from another recordset
How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
> -
Hello,
We need some help with an SSAS MDX query based on date logic. One of the problems is that I don't have access to the Cube but have been given a query example with the logic needed for the calculation. Here's the scenario;
The ETL process will run on the first Tuesday after the 15<sup>th</sup> of a given month. The Analysis Cube data queried should include the current year up to the end of the previous month. For example, on May 19<sup>th</sup>
(the first Tuesday on or after the 15th) the query should include data from January 1<sup>st</sup> through April 30<sup>th</sup>.
The 15<sup>th</sup> of the month is not part of the query, it is a factor in when the query is run. The query will always be in terms of complete months.
SELECT
NON EMPTY { [Measures].[Revenue Amount],
[Measures].[Utilization],
[Measures].[AVG Revenue Rate],
[Measures].[Actual Hours] }
ON
COLUMNS,
NON EMPTY { ([dimConsultant].[User Id TT].[User Id TT].ALLMEMBERS * [dimConsultant].[Full Name].[Full Name].ALLMEMBERS * [dimConsultant].[Employee
Type].[Employee Type].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION,
MEMBER_UNIQUE_NAME
ON
ROWS
FROM
( SELECT
( { [dimDate].[Week Date].[1/4/2015], [dimDate].[Week Date].[1/11/2015], [dimDate].[Week Date].[1/18/2015], [dimDate].[Week Date].[1/25/2015], [dimDate].[Week Date].[2/1/2015] } )
ON
COLUMNS
FROM
( SELECT
( { [dimIsBillable].[Is Billable].&[True] } )
ON
COLUMNS
FROM
[SSASRBA]
WHERE
( [dimIsBillable].[Is Billable].&[True], [dimDate].[Week Date].CurrentMember ) CELL PROPERTIES VALUE,
BACK_COLOR,
FORE_COLOR,
FORMATTED_VALUE,
FORMAT_STRING,
FONT_NAME,
FONT_SIZE,
FONT_FLAGSHi Hans,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Simon Hou
TechNet Community Support -
Newbie: Trying to write PL/SQL that is dynamic based on data
Hi everyone,
I was wondering how I would go about writing a report that outer joins based on data from the main table? Here is what I wanna do in pseudo-sql:
SELECT
b.po_number,
a.ht_code,
b.figure_no,
b.order_number,
a.supplier_no,
b.cert_date,
b.plant
FROM header b, part_spec a
where ...
begin:
project = '' /* initialize project */
/* The table to get the project value for the report is named ORDER01 or ORDER02 or ... */
/* It is the word ORDER concatenated with the plant value above. */
select project from 'ORDER' || :PLANT;
END;
How would I do this with APEX 2.0?
I've successfully used APEX to generate SQL Query reports (REGION) but never PL/SQL.
Your help is appreciated,
FerrisWheel
Edited by: FerrisWheel on Dec 15, 2009 10:13 AM
Edited by: FerrisWheel on Dec 15, 2009 10:14 AM
Edited by: FerrisWheel on Dec 15, 2009 10:14 AMOK, Thanks for the quick feedback. Here is a quick generic SQL I wrote up to show my goal using your suggestion. Notice the ERP_ORDERHDR and plant values in each of the SQLs below.
SELECT b.cust_po_no,
a.ht_code,
b.item_no,
b.ERP_ORDER_NO,
a.supplier_code,
b.cert_date,
c.prj
FROM CERT_HDR b, PART_DETL a, ERP_ORDERHDR011 c
WHERE plant = 1
AND a.cert_no = b.cert_no
AND a.cert_no like '%%%' || UPPER(:p1_cert_no) || '%%%'
AND b.cust_po_no like '%%%' || UPPER(:p1_cust_po_no) || '%%%'
AND a.ht_code like '%%%' || UPPER(:p1_ht_code) || '%%%'
AND b.item_no like '%%%' || UPPER(:p1_item_no) || '%%%'
AND b.ERP_ORDER_NO like '%%%' || UPPER(:p1_sales_order) || '%%%'
AND (b.cert_date BETWEEN :P1_DATE_FROM AND :P1_DATE_TO)
AND c.orno (+) = b.ERP_ORDER_NO
AND c.prj like '%%%' || UPPER(:p1_project) || '%%%'
UNION ALL
SELECT b.cust_po_no,
a.ht_code,
b.item_no,
b.ERP_ORDER_NO,
a.supplier_code,
b.cert_date,
c.prj
FROM CERT_HDR b, PART_DETL a, ERP_ORDERHDR012 c
WHERE plant = 2
AND a.cert_no = b.cert_no
AND a.cert_no like '%%%' || UPPER(:p1_cert_no) || '%%%'
AND b.cust_po_no like '%%%' || UPPER(:p1_cust_po_no) || '%%%'
AND a.ht_code like '%%%' || UPPER(:p1_ht_code) || '%%%'
AND b.item_no like '%%%' || UPPER(:p1_item_no) || '%%%'
AND b.ERP_ORDER_NO like '%%%' || UPPER(:p1_sales_order) || '%%%'
AND (b.cert_date BETWEEN :P1_DATE_FROM AND :P1_DATE_TO)
AND c.orno (+) = b.ERP_ORDER_NO
AND c.prj like '%%%' || UPPER(:p1_project) || '%%%'
UNION ALL
SELECT b.cust_po_no,
a.ht_code,
b.item_no,
b.ERP_ORDER_NO,
a.supplier_code,
b.cert_date,
c.prj
FROM CERT_HDR b, PART_DETL a, ERP_ORDERHDR014 c
WHERE (plant = 4 or plant = 5 or plant = 8)
AND a.cert_no = b.cert_no
AND a.cert_no like '%%%' || UPPER(:p1_cert_no) || '%%%'
AND b.cust_po_no like '%%%' || UPPER(:p1_cust_po_no) || '%%%'
AND a.ht_code like '%%%' || UPPER(:p1_ht_code) || '%%%'
AND b.item_no like '%%%' || UPPER(:p1_item_no) || '%%%'
AND b.ERP_ORDER_NO like '%%%' || UPPER(:p1_sales_order) || '%%%'
AND (b.cert_date BETWEEN :P1_DATE_FROM AND :P1_DATE_TO)
AND c.orno (+) = b.ERP_ORDER_NO
AND c.prj like '%%%' || UPPER(:p1_project) || '%%%'
and this would go on for up to 4 more unions. Is there a way to use PL/SQL to make it more clean? Another issue I have with the above is that the c.orno field that I try to outer join is not numeric whereas the b.ERP_ORDER_NO is numeric. I can to_char(c.orno) but how do I do that and still have an outer join? If I can use PL/SQL, I hope to be able to better control the output and eliminate the unions.
I hope this is enough information.
Thanks,
FerrisWheel -
List item - Population - Based on Data setup
Dear All,
I need to populate the list item based on data defined at the database level.
Tables Used:
Table 1 : JBCAI_JOB_COM_ADD_INFO
Column Name Pk Null? Data Type Default
JBEDC_UID 1 N NUMBER (22)
JBCAI_ADD_INFO_CODE 2 N VARCHAR2 (2 Char)
JBCAI_INFO_CODE_SEQUENCE 3 N NUMBER (3,1) 1
JBCAI_ADD_INFO_TEXT Y VARCHAR2 (35 Char)
SHIPCOMP_CODE N VARCHAR2 (4 Char)
Table 2 :CODES
CODE_TYPE CODE_VALUE DESCRIPTION NEXT_VALUE CODE_FLAG
MCAR 01 Customs References 01 NULL N
MCAR 02 Customs References 02 NULL N
MCAR 03 Value of Commodities NULL N
MCAR 04 Currency of commodities NULL N
MCAR 05 Purchase Order Number NULL N
MCAR 06 Other NULL N
MCAR 07 Consignee Name NULL N
MCAR 08 VIN NULL N
FORMS Section
=========
JBCAI_ADD_INFO_CODE are the list items which needs to be populated; JBCAI_ADD_INFO_TEXT(free text) which user can enter any descriptions.
References - Label of the Block
JBCAI_ADD_INFO_CODE JBCAI_ADD_INFO_TEXT
Customs References 01 - Free Text()
Customs References 02 - Free Text()
Value of Commodities - Free Text()
Currency of commodities - Free Text()
Purchase Order Number - Free Text()
Other - Free Text()
Consignee Name - Free Text()
VIN - Free Text()
VIN - Free Text()
Business Rules:
If JBCAI_ADD_INFO_CODE has the flag as 'N' in CODES table then user can select only one time from the list item.
If JBCAI_ADD_INFO_CODE has the flag as 'Y' in CODES table then user can do multi-selection from the list item e.g; VIN
How the records are fetched:
Value for the list item are been populated from CODES table ; which am doing through the below query.
In WHEN-NEW-FORM-INSTANCE am using the below code:
PROCEDURE p_fetch_code_value
IS
l_query VARCHAR2(200) ;
l_rg_name VARCHAR2(40) := 'CODES';
l_errcode NUMBER;
l_rg RECORDGROUP;
BEGIN
l_query := 'SELECT adcod.description description,adcod.code_flag code_flag FROM codes adcod WHERE adcod.code_type = ''MCAR'' AND adcod.code_value IN (''01''''02'',''03'',''04'',''05'',''06'',''07'',''08'') ORDER BY code_value';
l_rg := FIND_GROUP( l_rg_name );
IF ID_NULL(l_rg) THEN
l_rg := CREATE_GROUP_FROM_QUERY(l_rg_name, l_query);
END IF;
l_errcode := POPULATE_GROUP( l_rg );
POPULATE_LIST('BLK_CONTROL.JBCAI_ADD_INFO_CODE',l_rg);
EXCEPTION
Handled WHEN OTHERS exception
END p_fetch_code_value;
Saving of Record:
List value selection are saved to JBCAI_JOB_COM_ADD_INFO.JBCAI_ADD_INFO_CODE column.
Free Text is saved to JBCAI_JOB_COM_ADD_INFO.JBCAI_ADD_INFO_TEXT column.
Doubt:
When i select the first list item value i.e Customs References 01 and then enter some description i.e free text and moved to the next list item; the value Custom reference 01 should not be visible wheras the other values should have to be visible e.g; Customs Reference 02,Value of Commodities.....
Please help and let me know how can i acccomplish this task?
Thanks....
Regards,
Sunil.GHi Sarah,
Thanks for your reply.
There is no issue in the population of the list item; it is working fine with the query which i have pasted.
My doubt is:
There are few places where i have set the code_flag as 'Y' / 'N'.
For the first time when user selects the list item; all the values should be shown.....
If user has selected the first list item i.e Customs Reference 01 for which the code_flag is 'N' from a multi-record block; then when he moves to the further lines the previous selection for which the flag is set as 'N' should not be shown(if user has already selected once) e.g; 'Customs Reference 01' should not be shown again if user has made the selection before.
Plz revert incase more explanations required.
Thanks...
Regards,
Sunil.G
Edited by: Sunil G on Nov 29, 2009 12:16 AM -
How to process data in the past based from data in the present
hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi 16 KB
weight.txt 1 KB
data .txt 1 KBHi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir. -
Hide Repeating Frames based on data value
Hello,
Wonderful forum. Hope someone out there can give us input on this one. We have a report where we would like to show a different layout depending on the data value from the master query. One layout occupies a full 8X11 page and the second layout occupies 1/3rd of a page. Is it possible to hide one reapeating frame and show the other based on data value? This would be a multiple page report and each page will have to take the correct payout depending on the value of the data in the row.
I appreciate any input on this. Thanks
RaviThanks for you input. I appreciate it.
I am having a problem doing this. Let us say i have 2 differnt paper layouts. I want to show or hide one of the layouts based on a data value.
The problem i am facing is that the 2nd instance of true value for showing the 1st layout is over lapping the 1st instance of the 2nd layout thus showing 2 layouts overlapping each other on the same page. I know this is confusing but i will attempt to give an example:
page 1 shows - layout #1 only is showing based on result of data value. This is good.
page 2 shows - layout #2 shows based on data value, but also the 2nd instace of layout #1 (what ever data record satisfies layout #1 rule) is also showing over layout #2. So both the layouts are jumbled up on 1 page.
Essentially conditional formatting on layout #1 is not able to recognize that there is a 2nd layout taking its place and thus showing the layout #1 whenever it finds data which satisfies the condition on the 2nd page and so on..
Any help is greatly appreciated.
Thanks.. -
To select from database table based on date range
hi
i have a selection screen in which date range is being given
say eg 23/06/07 to 23/12/08
based on this date i want to select data from a ztable
eg i want to select a field amount from table
and three is a field date range on the table
for this particular field i want to select all records for amount field and factual field falling wiithing this date range and sum it
eg
based on date range as in selcetion screen
select amount( field1) factual ( field2) from ztable into it_ztable where date = ?....
please give me code for it and how to sum all values as i will get from the ztable into internal table the two values as fetched from the ztable
please suggest asap
regards
arorahi
i am using
sELECT field1 field2 FROM Ztable INto it_matu
where DATE GE sl_dat-low
AND DATE LE sl_dat-high.
i am getting data in internal table but
say i have twelve records now i want to sum it the both the columns into and use that sum final amount to display
let me know how to use sume in the intrranal tabl do i need to use control statement
how to use the sum for two columns and take into a serperate variable to display
regards
aRora -
Hi,
I've been really struggling to get this working for a few days and near the point of giving up!!
I'm using output designer 5.4 and I'm trying to change jfmain for the whole document based on data in the file, so if the field type is A, then set it to JFMAIN_A and if it's B, set it to JFMAIN_B. I've nearly got it working by at the top of JFPREAMBLE (just below ^FILE DOCVAR:JFPREAMBLE_1 DICTIONARY) putting the following two lines.
^page JFMAIN_A
^define group:SWITCHPAGE @_$_.@(IF("@TYPE."=="A","\pageJFMAIN_A\field$POSITION\subformHEADER.","\pageJFMAIN_B\fiel d$POSITION\subformHEADER.")).
The only problem with this is that it always prints a page with just the elements (two graphics logos) of JFMAIN_A then prints the report with the correct JFMAIN, either A or B.
If I don't do the
^page JFMAIN_A
It never changes the JFMAIN.
I've tried loads and loads of different permutations of this but nothing works.
Any help would be massively appreciated.
MikeHi there,
Not sure if this will help.
Keep the two foundation pages as JFMain and JFMain_B. By default the central server looks for JFMain for the first page. -
Calculation based on date key figures in BEx
Hi Friends,
Hi Friends,
I need to creat report for sales order data, which involved the calculation based on dates.
In my cune iam having the data at the granual level with the dates as key figures. the calculation that i need to do is VTW = Actual PGI date - Customer want date.
1) whn i run the report at the granual level my VTW is working correctly. No issues.
2) when i run the report at higher levels the date fields are updated with X, as the system is unable to aggrigate the dates. The dates are at the material level in a sales order. I need to show the VTW at the sales order level (each one of the two dates are same for all the materials). So, when i run the report with out mataril at the sales order level...i wanto sea the bothe date fields in a single line and also the VTW calculated as the different between throse two dates.
3) Once we get the VTW correctly at the sales orde level. if i drill down the report for material, i want to sea both the dates in every record againest the matarial, but the VTW only aginest the first record...that is againest the sales order. I dont waht the VTW value repeated/duplicated for all the records againest the sales order,as VTW makes sence only at the Sales Order level.
Please suggest me hwo i can achive the resulsts by meeting both Point 2 and 3.
Thanks for ur help...in advance.
Thanks,
RenuHi..
I have the data from the extractore and in the cube as below.
SALES ORDER ITEM MATERIAL DATE1 DATE2
101 Item1 Mat1 01/01/2010 15/01/2010
101 Item2 Mat2 01/01/2010 15/01/2010
101 Item3 Mat3 01/01/2010 15/01/2010
I need the reports as below...
Report1:
SALES ORDER DATE1 DATE2 VTW (DATE2 - DATE1)
101 01/01/2010 15/01/2010 14
currently iam getting this Report1 output as below...
SALES ORDER DATE1 DATE2 VTW (DATE2 - DATE1)
101 X X 42
Report2: Out put required as below
SALES ORDER ITEM MATERIAL DATE1 DATE2 VTW (DATE2 - DATE1)
101 Item1 Mat1 01/01/2010 15/01/2010 14
101 Item2 Mat2 01/01/2010 15/01/2010
101 I tem3 Mat3 01/01/2010 15/01/2010
currently iam getting this Report2 output as below...
SALES ORDER ITEM MATERIAL DATE1 DATE2 VTW (DATE2 - DATE1)
101 Item1 Mat1 01/01/2010 15/01/2010 14
101 Item2 Mat2 01/01/2010 15/01/2010 14
101 I tem3 Mat3 01/01/2010 15/01/2010 14
As VTW is need to be measued at the sales order level and we always have the DATE1 & DATE2 as same for all the itesm, it should be shon as only 14 in the first record. It mean once iget the required output from Report one in a single line with VTW as 14, it should not repeat with every line , when i dril down the report for Items or materials.
Even if i can generate oly report2 as required in a single sheet ...that will be enough.
Plas kindly provide some solution as how we can achieve this,
Thanks,
Renu -
Hi,
I am trying to output only a successful job during the past 24 hrs of each day. If there is job that has an outcome of a success and a failure within the last
24 hrs for each day, I want to only output the successful one. If there are no success for the same job, I will output the last attempted failed job.
Here are my columns:
current output:
JOB_ID JOBDATE GROUP PATH OUTCOME FAILED LEVEL ASSET
3400908 7/27/2012 10:01:18 AM polA target1 Success 0 incr clone1
3400907 7/27/2012 10:01:09 AM polA target1 Failed 0 incr clone1
3389180 7/23/2012 10:01:14 AM polA target1 Failed 1 incr clone1
3374713 7/23/2012 10:01:03 AM polA target1 Success 0 incr clone1
3374712 7/22/2012 11:24:32 AM polA target1 Success 0 Full clone1
3367074 7/22/2012 11:24:00 AM polA target1 Failed 1 Full clone1
3167074 7/21/2012 10:01:13 AM polA target1 Success 0 incr clone1
336074 7/21/2012 10:01:08 AM polA target1 Success 0 incr clone1
desired output:
JOB_ID JOBDATE GROUP PATH OUTCOME FAILED LEVEL ASSET
3400908 7/27/2012 10:01:18 AM polA target1 Success 0 incr clone1
3374713 7/23/2012 10:01:03 AM polA target1 Success 0 incr clone1
3374712 7/22/2012 11:24:32 AM polA target1 Success 0 Full clone1
3167074 7/21/2012 10:01:13 AM polA target1 Success 0 incr clone1
Here is a code I am trying to use without success:
select *
from
(selectjob_id, jobdate, group, path, outcome, Failed, level, asset,
ROW_NUMBER() OVER(PARTITION BY group, path, asset ORDER BY jobdate desc) as rn
from job_table where jobdate between trunc(jobdate) and trunc(jobdate) -1 )
where rn = 1
order by jobdate desc;Thanks,
-AbeHi, Abe,
You're on the right track, using ROW_NUMBER to assign numbers, and picking only #1 in the main query. The main thing you're missing is the PARTITION BY clause.
You want to assign a #1 for each distinct combination of group_id, path, asset and calendar day , right?
Then you need to PARTITION BY group_id, path, asset and calendar day . I think you realized that when you named this thread "Query Based *on date partition* ".
The next thing is the analytic ORDER BY clause. To see which row in each partition gets assigned #1, you need to order the rows by outcome ('Success' first, then 'Failed'), and after that, by jobdate (latest jobdate first, which is DESCending order).
If so, this is what you want:
WITH got_r_num AS
SELECT j.* -- or list columns wanted
, ROW_NUMBER () OVER ( PARTITION BY group_id -- GROUP is not a good column name
, path
, asset
, TRUNC (jobdate)
ORDER BY CASE outcome
WHEN 'Succcess'
THEN 1
ELSE 2
END
, jobdate DESC
) AS r_num
FROM job_table j
WHERE outcome IN ('Success', 'Failed')
-- AND ... -- Any other filtering, if needed
SELECT * -- or list all columns except r_num
FROM got_r_num
WHERE r_num = 1
;If you'd care to post CREATE TABLE and INSERT statements for the sample data, then I could test it.
It looks like you posted multiple copies of this thread. I'll bet that's not your fault; this site can cause that. Even though it's not your fault, please mark all the duplicate versions of this thread as "Answered" right away, and continue in this thread if necessary.
Edited by: Frank Kulash on Jul 28, 2012 11:47 PM
This site is flakier than I thought! I did see at least 3 copies of this same thread earlier, but I don't see them now.
Maybe you are looking for
-
After change of hard drive batteries are not available anymore... Any advice?
After my hard drive has been changed at the Apple Store today (it had corrupted files and didn't work anymore), the battery of my MacBook Pro (13 Inch, Mid 2009, HDD 160GB OSX 10.5) doesn't charge anymore. It shows the "X" in the battery symbol and s
-
PowerBook G4 AirPort connected to Linksys Wireless G
I've started having problems with my PowerBook dropping or not connecting to my primary wireless network. If I put it to sleep or shut it down, it occasionally will come back up connected to my neighbors unsecure network. It doesn't always come back
-
CP6 - Image button needs clicked twice.
I am having an issue where an image button inside a group sometimes needs to be clicked twice before the associated success action is fired. This is how I have it set up. 3 groups on the slide are initially hidden. on the slide I have a smart shape
-
Can you carry Total Equipment Coverage (TEC) on an iphone?
Yes or no? I have heard people claim both.
-
Reduce image size ( un-enlarge )
I have a digital image of a house. I want to make a Christmas tree ornament that will have a picture of just the front door. The door in a 4x6 print is about 3x4. I want to reduce that to about 2x3. I am only able to print on 4x6 paper, so I want to