Mulitple Detail record values in file adapter

Hi,
How shall I pick up a file in sender file adapter which is having two different record identifiers for their detail records. My structure is
Header - Record identifier is HDR
Detail - Record identifier is 10 and 30
Trailer - Record identifier is TRL
While configuring File adapetr I am unable to pick up Detail records with 30 because my Detail.KeyFieldvalue is only equals to 10. I know I can have a work around of picking up all the records and then in map distinguish all the different record types but I am interested in picking up all the detail records having different record identifiers.
thanks .

Rakesh
Just an Idea..If you can make your source structure as
Header
Detail1
Detail2
Trailer
Then you can give Detail1 key as 10 and Detail2 Key as 30. I think its just matter of getting records and assigning to target structure, guess i think it might work
Just my 2 cents

Similar Messages

No Adapter Engine value in File Adapter Config

Hello,
When we configured File adapter in Integration Directory we noticed that ADAPTER ENGINE pull down is empty.
I cannot assign any value to Adapter Engine field.
It is a new test system and should all be configured already. I wonder if this is ok or not. My experience was that I should be able to see Adapter Engine there??
Moreover Adapter Engine field has a red star which means is mandatory field but I am not sure...?!
I will appreciate any directions from experienced or xi basis people.
Thanks

Follow the steps given in this BLOG for adapter enginer coming in ID -
Adapter Engine cannot be found in Integration Directory
Gud Luck !!

Downloading Block details record values onto an Excel sheet.

Dear All,
I am working on a forms in which there is a requirement to download all the record values populated on a block onto an excel sheet.
The block is based on a database table.
Please let me know if you have ever worked on such a requirement.
Please reply ASAP.
Thanks in advance.
Regards,
Sanu.

Hello,
Unfortunately u did not mention the forms version. Anyway,
how to copy data from excel to oracle forms
Transfer Data from excel to oracle forms
http://searchoracle.techtarget.com/answer/Moving-data-from-Oracle-report-to-MS-Excel
-Ammad

Key Field Value for File Adapter Sender Wildcard

Hello everybody, is there a way to use a wildcard for the property of NamA.keyFieldValue in the cc for a Fils Sender????, here's an example why, I need to take some Files via PI 7.0 and my key filed can change according to the file an example is that in a file can be HF28 and in another file can be HF29, the only character that is going to be constant is the H, I would really appreciate any suggestions, thanks in advance.
Regards,
Julio Cesar

Hi Julio
File sender adapter will read the file using FCC
Key Field Value entry is mandatory if the key field name is set. Otherwise, the entry can be ignored
http://help.sap.com/saphelp_nw70/helpdata/EN/34/393071e9b998438ddb8ce97cd617a1/frameset.htm
Content Conversion ( The Key Field Problem )
Thanks
Gaurav Bhargava

Handling Multiple Records in a file adapter

Hi All,
My source file message :
<Source_MT>
 <Records>....0-Unbound
 <Country>THAILAND</country>
 </Records>
 <Records>....0-Unbound
 <Country>ANGOLA</country>
 </Records>
</Source_MT>
Target Message:
<Target_MT>
 <Employees>....0-Unbound
 <Country>THAILAND</country>
 </Employees>
</Traget_MT>
Now in my scenario ,source message will have multiple records with different countries........
I want to send these records to different receivers on the basis of this coutry field,means after target message mapping....all the records corresponding to THAILAND must be sent to THA_RECVR system..all the records corresponding to ANGOLA must be sent to Angola recvr systems...
Please help me to club target message records on the basis of country field and then send it to correspodning receiver systems ......
Should I use BPM?

Shweta,
You need to do enhanced receiver determination. You can handle this by determining them during runtime.
Check this out : Re: Condition In Receiver Determination Not Working [Page 3 : My reply]
raj.

File content conversion - sender adapter for Header and detail records

Hi Experts,
I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
Thanks
Deepak

Hi
Refer the below fourm link,
Flat file whitout id
Regards
Ramg.

Outbound file adapter for multiple record write

am using jdev 10.1.3.1
and SOA suite 10.1.3.1
I am trying to read a table and write the records to a csv file.
The bpel process I have constructed is :
receive > assign input value to table select parameter > select records from table > assign table select output values to file input value > invoke file adapter to write a csv file > assign a literal to process out value.
when i execute this process it is showing me an error on the file adapter invoke activity.
the error is :
</part></Invoke_2_Write_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TableReader_1.0_594707f7f819a3a4a2002c98afbd42fa.tmp/WritePersonFile.wsdl [ Write_ptt::Write(People) ] - WSIF JCA Execute of operation 'Write' failed due to: Translation Error.
Error while translating message to native format.
; nested exception is:
ORABPEL-11017
Translation Error.
Error while translating message to native format.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
</summary>
any help would be appreciated.
thanks

Hi,
In your case, to write any data to a file, you need to define/use a schema when you are using a file adapter.
Cheers,
Abhi

System Extract - Incrementing a sequence number in detail record layout

I have a system extract for a bank that requires a file header, batch header, detail, batch trailer and file trailer record. The detail record is at the run result level as I am looking to choose all records for a particular deduction (savings bonds) and I also have to put employee ssn and full name. This is working fine. I also have to put a sequence number, ie. detail record layout is record type, length 2, string, record sequence number, 5, ?????, employee SSN, length 9, field, employee full name, length 9, field. I need to increment the record sequence number by one for each detail record in the file. Ie. detail record 1 has record sequence number of 00001, detail record 2 has record sequence number of 00002.
What type of data element would I set up? For this particular field, I don't need to go against a database field, I only need to keep track of the previous record's sequence number so that I can keep incrementing by 1 until all detail records have been written. The batch trailer has a record count of the number of detail lines and that works fine because I've set that up as a type 'total' with a 'count' of the detail records. I also have in the batch trailer a sum of the pay values from each of the detail records and that works fine as subtrailers allow total data elements where detail records do not.

You can use any of the below mentioned 2 options in the ctl (Control) file:
1. SEQUENCE(1,1)
2. "xxcust_autoinv_seq.nextval"
where xxcust_autoinv_seq is a database sequence.
Thanks,
Angelica.

File Adapter to EJB in BPEL

Hi,
I have one XML file that i am reading using File Adapter in BPEL process. after reading i want to pass those values to EJB Adapter.
I used Trasform to mapp output variables of File Adapter to Input parameter of EJB service.
But the Invoke process is not happening.
How to Pass values from File Adapter to EJB ?
Thanks

Hi Sonia
It is not possible to achieve this using debatching. In fact, the use of the Debatching technique is appropriate when your requirement is exactly the opposed: When you need to run instances simultaneously.
If you need to process each record sequentially, you should consider using just one instace (not using debatching and let the process reads the entire file), using a while and considering your XML as an array, processing each record as a single unit.
If the CSV file is too big, you should consider using a process A that breaks the file into smaller files and copy sequentially the small pieces to a directory where process B is reading the entire file.
[]´s
Marcelo

File Content Conversion - Sender File Adapter - Record Delimeter ~

The inbound file has file has ~ as record delimeter. I am using the FCC at sender file adapter to covert this file into XML. Somehow, the file adapter is not able to interpret "~" as my record delimeter even thoough I specified "record.endSeparator = ~" in FCC.
Would someone help me with a solution?

Raju,
You can also try to use the '0x7E' as endSeperator condition.
I am not sure if the HTML tag will work but this should do the trick. This should be the HEX corresponding entry
char description hex char code html
" ~ " "Tilde" "0x7e" "~" &!tilde; (without !)
greets.
in adition to this see SAP help
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/655453b48a4ddfe10000000a1553f7/frameset.htm
Special Characters in Strings for Separators
In all strings for separators (NameA.fieldSeparator, NameA.beginSeparator, NameA.endSeparator), you can specify non-printable ASCII characters. These characters can each be inserted individually in the strings in the form ´0xHH´ (including the quotation marks), where HH represents the character encoded as a hexadecimal value.
Please also ensure that the "recordSet Structure" also need to be configured Correctly
for example:
Header,1,Detail,*
Header.fieldSeperator --> %parameter%
Detail.fieldSeperator --> %parameter%
Detail.endSeparator --> '0x7e'
Greets

Is a record ID field required for File Adapter (Header, Body, Trailer)?

Hi,
File to File scenario. The sender file is a text file i.e. .txt which needs a conversion on the sender file adapter. There are three structures in the file namely header (one), body (many) and Trailer (one). From what I can see I need a record Id field (with the same name) in all the structure types, can anyone confirm this for me?
Thanks,
Leanne

That is correct. If you have a variable number of records of a particular type, then you need a way to accurately identify each type of record... and that is done via the key field (or Record ID) which is present in each record type.
Extract from SAP Online Help:
Key Field Name
If you specified a variable number of substructures for Recordset Structure, in other words, at least one substructure has the value *, then the substructures must be identified by the parser from their content. A key field must be set with different constants for the substructures. In this case, you must specify a key field, and the field name must occur in all substructures.
Specify the Key Field Type to be used to compare the predefined values. This entry is used if the key field name is defined.
NameA.keyFieldValue: Specify the value of the key field for the structure. This entry is mandatory if the key field name is set. Otherwise, the entry is ignored.
For more info, refer to the SAP Help:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm

Key field value in outbound/sender file adapter

Hi,
I have a flat file coming in PI. The structre for the same is
1. Detail record line ocurs n number of time
2.Summary record line occurs only once at the end
I have defined a datatype as follows
<DT>
 <Recordset>
 <Detail>
 All the detail fields
 </Detail>
 <Summary>
 All the summary fields
 </Summary>
</Recordset>
</DT>
Now the number of detail record is not know. But there is only one summary record.
In the sender file adapter do we need to configure the keyfield paramter? If the number of detail record is * .
The problem is the input file does not has any key field to parse/identify the detail or sumary record.
Any alternative?
Thanks

hi ,
if you have two structures so do like this:
Recordset strucrure detail,summary*
detail.fieldFixedlength : 10,20
detail.fieldNames : xxx,yyy
summary.fieldFixedlength : 10,20
summary.fieldNames : www,vvv
rest configuration will be same.
hope this will help.
regards
HONEY

Handling two record strucutre in incoming file adapter

I have a flat file (fixedlength type), which needs to be converted into the XMLPayload I tried multiple option but didn't work. Here is the file strucutre
P CONTRLT00010 01SCNCTCFSCR 001548340                12              130*
P CONTRLT00020 5                                006
P CONTRLT00010 01SCNCTCFSCR 001548340                12   400           *
P CONTRLT00020                                  011
P CONTRLT00010 01SCNCTCFSCR 001548340                12   800           *
P CONTRLT00020                                  030
P CONTRLT00010 01SCNCTCFSCR 001548340                12 3200           *
P CONTRLT00020                                  350
P CONTRLT00010 01NCGRTCFSCR 004824269                12              176*
P CONTRLT00020 7                                006
So this file has two record strucutre, I created the Datatypes with following strucutre
DT_TYPE
    RECORD_SET1
        FIELD1
        FIELD2
   RECORD_SET2
        FIELD1
        FIELD2
In the file adapter, I marked the recordsetignore true. and defined the following parameters
RECORD_SET1.fieldFixedLengths 1,8,6,1,1,6,6,1,1,10,15,2,6,7,1,4,7
RECORD_SET1.endSeparator 'nl'
RECORD_SET1.fieldNames KEY,PRGOGRAM_LITERAL,TASK_NUMBER,FILLER,COMM_CANCEL,COMPANY_NUMBER,PROGRAM_FIELD,CODE1,CODE2,KEY_FIELD,ADDITIONAL_KEY,CARD_CODE12,REGULAR_HOURS12,REGULAR_RATE12,OT_CODE12,OT_HOURS12,CONTINUATION_IND
RECORD_SET2.fieldFixedLengths 1,8,6,1,4,6,4,4,4,4,10,3,1,6,2,5,1,1,7
RECORD_SET2.endSeparator 'nl'
RECORD_SET2.fieldNames KEY,PRGOGRAM_LITERAL,TASK_NUMBER,FILLER,OT_HOURS12,OT_RATE12,CONTROL12_3,CONTROL12_4,CONTROL12_5,CONTROL12_6,FUNCTION12,HED_NBR_12,TAX_TYPE12,LOCAL_CODE12,STATE_CODE12,PERIOD_DATE12,SHIFT12,DEDUCTION_CYCLE12,ENDO_OF_FORM_IND
ignoreRecordSetName true
RECORD_SET1.keyFieldValue 1
RECORD_SET2.keyFieldValue 2
RECORD_SET1.keyFieldInStructure ignore
RECORD_SET2.keyFieldInStructure ignore
RECORD_SET2.missingLastfields
RECORD_SET1.missingLastfields
On the adapter end its not reading the message and thrwoing the warning
Channel CC_TCFSCR_SENDER: Converted complete file content to XML format.
2009-07-30 13:21:26 Warning Channel CC_TCFSCR_SENDER: Empty document found - proceed without sending message.
Any pointer will be helpful.
Thanks,
Samir

Hi,
You are mentioning the wrong keyfield values i beleive.
RECORD_SET1.keyFieldValue 1     --- > on place of 1 enter the exactvalue which you want to use as key field.
RECORD_SET2.keyFieldValue 2     --- > same apply here.
As adapter is unable to find 1 or 2 in as keyfield in record its sending the empty document.
Try :
RECORD_SET1.keyFieldValue = P CONTRLT00010
RECORD_SET1.keyFieldValue = P CONTRLT00020
I hope his might help u.
Thanks.

File Adapter: Multiple Records, Multiple Types to Multiple DB Tables

Hi there,
I have a proof-of-concept scenario which I am trying to model in ESB:
I have a single flat file with one invoice header record and multiple invoice lines.
I want to read this file via the File Adapter, and insert the different records into different database tables: the invoice header in an invoice table, and the invoice lines into a line item table.
If I tackle the lines in isolation no problem (i.e. single file with only invoice lines in to the invoice lines table). Things break down when I add the invoice header into the mix.
Does anyone have an example of this or something similar?
Would I need to use seperate database adapters for the two tables, or is this achievable with a single database adapter?
Thanks in advance!

Thanks for that Abhi.
I actually tried that, but I'd find that I would only get the header record added properly; the multiple invoice lines would not get written to the invoice line table properly.
I found that I would either get the same invoice line added many times, or I would get null values.
I played around with the for-each statement, and I even tried creating my own xsd for the data file (instead of using the native format tool).
Any ideas what the issue might be?
Thanks,
Richard

How to iterate through multiple records read from a file adapter?

I am reading multiple records from a file using SyncRead file adapter.
I want to iterate through the records to perform some action on every record. How to do this?
I found few threads related to this..but did not get the solution.
Please note that I am using Jdev 10.1.3.4
Thanks

For count expression, I am getting following error:
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:subLanguageExecutionFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>XPathExecutionError</code>
<summary>XPath expression failed to execute. Error while processing xpath expression, the expression is "ora:countNodes(bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection','/ns4:EmpCollection'))", the reason is FOTY0001: type error. Please verify the xpath query. </summary>
</detail>
</Fault>
I hard-coded count, in order to proceed. Then I got following error
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:bindingFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>null</code>
<summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELProcess4_1.0_dc4a703c46a242f69d6cea305b2df3a3.tmp/WriteDA.wsdl [ WriteDA_ptt::insert(VbEmpCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Mapping Not Found Exception. The mapping [C1] for descriptor [class bpel___localhost_default_BPELProcess4_1_0__MD5_ad2539e1386433a9e059bcc969732f11_.WriteDA.VbEmp] could not be found. The input xml record had an element [VbEmp/C1]. ; nested exception is: ORABPEL-11627 Mapping Not Found Exception. The mapping [C1] for descriptor [class bpel___localhost_default_BPELProcess4_1_0__MD5_ad2539e1386433a9e059bcc969732f11_.WriteDA.VbEmp] could not be found. The input xml record had an element [VbEmp/C1]. Make sure that the input xml is valid relative to the xsd and that the mapping exists in the Mappings.xml. If an old version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the app server. If the same descriptor is described in two separate Mappings.xml files, make sure both versions include this attribute/mapping. </summary>
<detail>null</detail>
</detail>
</Fault>
The bpel code is as follows (I can share entire BPEL project..But not sure how to attach to the thread :( )
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="BPELProcess4"
targetNamespace="http://xmlns.oracle.com/BPELProcess4"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns4="http://TargetNamespace.com/InboundService"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:client="http://xmlns.oracle.com/BPELProcess4"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/ReadFA/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/WriteDA"
xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/db/WriteDA/"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:BPELProcess4"
myRole="BPELProcess4Provider"/>
<partnerLink name="WriteDA" partnerRole="WriteDA_role"
partnerLinkType="ns2:WriteDA_plt"/>
<partnerLink name="ReadFA" partnerRole="SynchRead_role"
partnerLinkType="ns1:SynchRead_plt"/>
</partnerLinks>

<variables>


<variable name="inputVariable"
messageType="client:BPELProcess4RequestMessage"/>
<variable name="outputVariable"
messageType="client:BPELProcess4ResponseMessage"/>
<variable name="Invoke_2_insert_InputVariable"
messageType="ns2:VbEmpCollection_msg"/>
<variable name="Invoke_3_SynchRead_InputVariable"
messageType="ns1:Empty_msg"/>
<variable name="Invoke_3_SynchRead_OutputVariable"
messageType="ns1:EmpCollection_msg"/>
<variable name="Invoke_3_SynchRead_InputVariable_1"
messageType="ns1:Empty_msg"/>
<variable name="Count" type="xsd:integer"/>
<variable name="iterater" type="xsd:integer"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client"
portType="client:BPELProcess4" operation="process"
variable="inputVariable" createInstance="yes"/>

<invoke name="Invoke_3" partnerLink="ReadFA" portType="ns1:SynchRead_ptt"
operation="SynchRead"
outputVariable="Invoke_3_SynchRead_OutputVariable"
inputVariable="Invoke_3_SynchRead_InputVariable_1"/>
<assign name="Assign_1">
<copy>
<from expression="1"/>
<to variable="iterater"/>
</copy>
<copy>
<from expression="1"/>
<to variable="Count"/>
</copy>
</assign>
<while name="While_1"
condition="bpws:getVariableData('iterater') <= bpws:getVariableData('Count')">
<sequence name="Sequence_2">
<switch name="Switch_1">
<case condition="bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection','/ns4:EmpCollection/ns4:Emp/ns4:C4') = "Pune"">
<sequence name="Sequence_1">
<assign name="Assign_3">
<copy>
<from expression="bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection','/ns4:EmpCollection/ns4:Emp')[bpws:getVariableData('iterater')]"/>
<to variable="Invoke_2_insert_InputVariable"
part="VbEmpCollection"
query="/ns3:VbEmpCollection/ns3:VbEmp"/>
</copy>
</assign>
<invoke name="Invoke_2" partnerLink="WriteDA"
portType="ns2:WriteDA_ptt" operation="insert"
inputVariable="Invoke_2_insert_InputVariable"/>
</sequence>
</case>
<otherwise>
<sequence name="Sequence_3">
<empty name="Empty_1"/>
<assign name="Transform_1">
<bpelx:annotation>
<bpelx:pattern>transformation</bpelx:pattern>
</bpelx:annotation>
<copy>
<from expression="ora:processXSLT('Transformation_3.xsl',bpws:getVariableData('Invoke_3_SynchRead_OutputVariable','EmpCollection'))"/>
<to variable="Invoke_2_insert_InputVariable"
part="VbEmpCollection"/>
</copy>
</assign>
</sequence>
</otherwise>
</switch>
<assign name="Assign_2">
<copy>
<from expression="bpws:getVariableData('iterater') + 1"/>
<to variable="iterater"/>
</copy>
</assign>
</sequence>
</while>
<reply name="replyOutput" partnerLink="client"
portType="client:BPELProcess4" operation="process"
variable="outputVariable"/>
</sequence>
</process>
From the process flow, I can see that the array element expression works and the first employee record is correctly assigned to the Invoke_2_Input_Variable.
However Invoke_2 is erroring out.
Thanks
Edited by: user8645981 on Feb 5, 2010 2:44 AM

Mulitple Detail record values in file adapter

Similar Messages

Maybe you are looking for