Multi-currency bidding & capturing price break-up in condition

Hello Friends
We want to perform multi-currency bidding & capturing price break-up in condition of SRM.Got stuck up as I need to transfer it to ECC.I have checked BAPI (FM) "BAPI_PO_CREATE1", but as it's in ECC not able to use it.Is there any FM in SRM which contains only the condition value of vendor bid.Condition values will be transferred to ECC for Price comparison (ECC T-Code:ME49).
Any help.......

NO suggestion received so far.
I am looking for a custom RFC FM to perform the task.

Similar Messages

Multi-Currency in Configurator

Hi,
we have enabled multi-currency and i am trying to see the prices of configured items in different currency on Configurator. When i launch configurator with base currency price is displayed in configurator but when we launch configurator with other than base currency (Available from Multi-currency conversion list attached to the price list), i am not able to see the prices in Configurator.
Please let me know if anyone worked on this.
Regards
GKK

Check the following profile values.
New Profiles: QP: Multi Currency Installed (possible values - Y or N in advanced pricing, N in basic pricing) New Concurrent Request: "Update Price Lists with Multi-Currency Conversion Criteria" New Tables: QP_CURRENCY_LISTS_TL, QP_CURRENCY_LISTS_B , QP_CURRENCY_DETAILS New column: CURRENCY_HEADER_ID in table QP_LIST_HEADERS_B
Srini C

Multi-currency site with offline processing

Is it possible to have a Multi-currency site with offline credit card processing? The offline credit card facility would be in Australia, so all transactions would be in Australian dollars, but the site would display either AUD or USD, depending on the user's selection.

To display prices in different currencies you will need to setup different domains or subdomains for each currency as per this article http://kb.worldsecuresystems.com/521/bc_521.html
Cheers,
-mario

Multi-currency API

Looking for an API which will translate multi-currency into USD for financials (GL).

I believe you posted another question earlier and John Goodwin refered you to a link.. Did that not help?
I believe you have only 1 "Sales Price" account where you want to enter by Eur/KG. You want this to be converted to $/MT. If thats correct, do you have another dimensions like units?
You will have to define your currency conversion calculation
Step 1: Copy EUR value to USD [USD = EUR]
Step2: Apply exchange rate as below
If you don't have units dimensions, and users know that USD values are in MT, use below
"USD" = "USD" * "EUR"->HSP_Average->"All other dimensions here"*1000;
If you have units dimension, use below
"USD"->"MT" = "USD" * "EUR"->"KG"->HSP_Average->"All other dimensions here"*1000;
The new value in USD will be converted to $/MT
Note that you will use 1.3, instead of 0.77 as I explained in previous message. This is assuming that you have defined the exchange rates table in planning web.
Cheers
RS

Multi Currency: IStore

Hi,
We have a price list with multi currency enabled. Base currrency is say SEK. Multi currency is enabled in pricelist for EUR and few other currency. Order form iStore is currently played into oracle in SEK currency. Is there a possibilty that i can order in EUR currency from iStore for the same price list.
QP: Multi-Currency Installed is Yes at the site level
QP: Multi-Currency Usage is Yes at iStore application level
Thanks in advance.

Hi,
It is possible only. Please enable your list of currency for your site. And select the different currency from istore in home page.
Steps to enable the currency:
Navigation: iStore Administrator-->istore merchant-->Sites-->currency.
And select multiple currency for site. Before that Enable the Layout for site. (i.e. Bin).
Steps to enable the Layout:
Navigation: iStore Administrator-->istore merchant-->Catalog-->section and select your root section, click update button. Then select Fixed layout for your root section and click "GO"button.
Bounce the apache and oacore bounce.
Thanks,

Dunning letter with multi currency

Hi
How to set dunning letter with multi currency.I have this customer that have multi currency transaction.How do i set the dunning letter to show multi currency value.Thanks

hi mohd rizal,
in dunning note configuration itself set the currency as USD. then it takes the local currency depending on the application. then it works for multiple currency's. bcoz it automatically takes the local currency.
hope u get what im saying. still u have any doubts, get me back.

I want to order multiple copies of an iPhoto book I have already purchased once. Is there a price break for multiple copies? Also, can I send to multiple addresses?

I want to order multiple copies of an iBook I have already purchased. I have two questions:
1) Can I send them to multiple addresses?
2) Is there a price break for multiple copies?

1) No.
2) No.

Need suggestion on Multi currency and Unicode character set use in ABAP

Hi All,
Need suggestion. In one of the requirement I saw 'multi-currency and Unicode character set experience in FICO'.
Can you please elaborate me how ABAPers are invlolved in multi currency as I think this is FICO fuctional area.
And also what is Unicode character set exp.? Please give me some document of you have any.
Thanks
Sreedevi
Moderator message - This isn't the place to prepare for interviews - thread locked
Edited by: Rob Burbank on Sep 17, 2009 4:45 PM

Use the default parser.
By default, WebLogic Server is configured to use the default parser and transformer to parse and transform XML documents. The default parser and transformer are those included in the JDK 5.0.
The built-in WebLogic Server DOM factory implementation class is com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl.
The DocumentBuilderFactory.newInstance method returns the built-in parser.
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();

Where in the icx tables are price break and price break quantities stored?

I am trying to build a query from the icx tables that will show me all the BPA line price breaks and quantities.
I cannot seem to find any documentation on what is specifically is extracted from the BPA lines when an internal catalog build is performed. I am able to validate that in iP, the price breaks are being taken into consideration when I create Requisitions with various quantities, but I do not know where iP is storing this information. Perhaps the data isn't stored and is taken from the core app po_line_locations_all table at the time the requisition is being created?
I have a BPA, line 27, that has multiple price break lines.
select rt_item_id, price_type, contract_num, contract_line_num, allow_price_override_flag, not_to_exceed_price, value_basis
from apps.icx_cat_item_prices
where contract_num = 'xxxxxx' and contract_line_num = '27'
and price_type = 'BLANKET';
All I could find when running this query was the price break information for the first price break line, none of the other price break lines.
If anybody knows where the documentation is that tells me exactly what is extracted from the core application BPA to the icx tables, I would be greatly appreciative. Even better, if someone already knows the answer to either 1) price break and quantity are not stored in icx tables or 2) they are stored and you have SQL that shows me how to find it, I would be so very appreciative to have this information.
Edited by: user6287397 on Jan 24, 2009 6:40 AM

I got the answer. :-)
Price breaks details are not stored in any icx tables. iP retrieves the information based on the need by date entered on the requisition.
Oracle support referred me to the Oracle® Purchasing Release 11i10 Open Interfaces and APIs.
The java code - SourceDocHelper.java - is responsible to get the price information by calling the procedure po_price_break_grp.get_price_break (POXPRBKB.pls DefaultPricing ) For a given a Source Document (Quotation/Catalog), Quantity and Unit of Measure, this procedure derives the best price for the calling routine.
The SQL used to get the price information that was sent to me is attached. Note that this SQL uses the need by date to get the right price in case of price break used at the distribution level.
SELECT poll.price_override
, round(poll.price_override * v_conversion_rate,
l_base_curr_ext_precision )
, poh.rate_date
, poh.rate
, poh.currency_code
, poh.rate_type
, poll.price_discount
, poll.price_override
, decode( poll.line_location_id,
null, pol.unit_meas_lookup_code,
poll.unit_meas_lookup_code)
, poll.line_location_id -- SERVICES FPJ
FROM po_headers_all poh -- FPI GA
, po_lines_all pol -- FPI GA
, po_line_locations_all poll -- FPI GA
WHERE poh.po_header_id = p_source_document_header_id
and poh.po_header_id = pol.po_header_id
and pol.line_num = p_source_document_line_num
and pol.po_line_id = poll.po_line_id
and ( p_required_currency is null
or poh.currency_code = p_required_currency )
and ( p_required_rate_type is null
or poh.rate_type = p_required_rate_type )
and nvl(poll.unit_meas_lookup_code, nvl(p_unit_of_measure,
pol.unit_meas_lookup_code))
= nvl(p_unit_of_measure, pol.unit_meas_lookup_code)
Change sysdate to l_pricing_date in order to use the Need By
Date
to determine the price.
and (trunc(nvl(l_pricing_date, trunc(sysdate))) >= trunc(poll.
start_date) -- FPJ Custom Price
OR
poll.start_date is null)
and (trunc(nvl(l_pricing_date, trunc(sysdate))) <= trunc(poll.
end_date) -- FPJ Custom Price
OR
poll.end_date is null)
--Bug #2693408: added nvl clause to quantity check
and nvl(poll.quantity, 0) <= nvl(p_in_quantity, 0)
Determining the price based on ship-to-location and
destination organization
and ((poll.ship_to_location_id = v_ship_to_location_id OR poll.
ship_to_location_id is null)
AND
(poll.ship_to_organization_id = p_destination_org_id OR poll.
ship_to_organization_id is null))
and poll.shipment_type in ('PRICE BREAK', 'QUOTATION')
-- <2721775 START>: Make sure Quotation Price Breaks are Approved.
AND ( -- ( poll.shipment_type IS NULL )
( poll.shipment_type = 'PRICE BREAK' )
OR ( ( poll.shipment_type = 'QUOTATION' )
AND ( ( poh.approval_required_flag <> 'Y' )
OR ( EXISTS ( SELECT ('Price Break is Approved')
FROM po_quotation_approvals pqa
WHERE pqa.line_location_id = poll.line_location_id
AND pqa.approval_type IN ('ALL
ORDERS', 'REQUISITIONS')
AND trunc(nvl(l_pricing_date,
sysdate)) -- FPJ Custom Price
BETWEEN
trunc(nvl(start_date_active, sysdate-1))
AND trunc(nvl(end_date
_active, sysdate+1)))))))
-- <2721775 END>
order by poll.ship_to_organization_id ASC, poll.ship_to_location_id ASC,
NVL(poll.quantity, 0) DESC,
trunc(poll.creation_date) DESC, poll.price_override ASC; /*
*/

Multi-Currency Customer Receivables Aging Query

Hello Everyone,
SAP B1 2005 SP 01 PL 42
We cannot produce customer statements for multi-currency accounts (CND & USD) through the Customer Receivables Aging report. The report converts all FC to LC which is not useful to the customer.
The statement must show the open invoices in USD and open invoices in CND so that the customer can pay in the appropriate currency.
We are attempting to create a query to solve this issue and assign a PLD to execute the calculations, but cannot see the best way to execute the task.
The customer account balance (displaying only unreconciled tans.) would be the most reliable data set (form 809), but it is not available as a table in the query manager. Any other table suggestions?
We would like to avoid building the query from scratch (collecting all open invoices, credits, payments etc...) to avoid error. We would also like to avoid exporting the data as this is very time consuming. Any suggestions?
Thanks in advance,
Tamara

We have found it better to set up two customers where different currencies are transacted - one in each currency. That way you can produce a statement in each currency.
I know it's not a perfect solution, but a good work around?
The only way to get the data you need would be to use OJDT and JDT1 tables, but you would need to join to the reconciliation table as well (OITR?) to get open transactions.

Multi Currency application

Hi All.
I have created a multi currency application with only two currencies USD and Euro. But when i try to enter the data into the data forms through USD or Euro, i am not able to do that.
But when i select local then it allows me to enter the data. I never created a local member and its not their in the dimension, so what is the significance of this local currency.
Also, i created some currency conversion scripts and run them successfully but when i see data across Euro or USD it is the same data i entered into the local currency.
Please guide as I am very confused.

Have a read of this post :- Re: Read/Write functionality in Planning Data Forms
Cheers
John
http://john-goodwin.blogspot.com/

Release is not picking price break

Hi All,
I have loaded a new Blanket Purchase Agreement and two price breaks
using API. My load was success (there are no errors in PO_INTERFACE_TABLE)
and I can see my BPA in Purchasing.
But, when I try to release items that fall in to specific price break that I loaded
above the price break discount is not get picked up.
I am not sure what I am doing wrong.
Any suggestion?
Thanks.

I found the error...I created line for one org and price break for a diff org!

Multi currencies in oracle hrms

Hi ,
I have one employee and he is from India and he is working in USA. and
We have pay him 50% in India Rupees and 50% in Dollars and his total salary is 1,00,000 Per Month. Can any one send me the setup for the Multi currencies to my mail id : [email protected]
Regards
Chandra sekhar

Yes, Essbase & Planning can do multiple currencies. It is more complicated to explain from an technical and setup perspective, but you can setup several ways depending on how the business wants to handle currency conversions. Planning has an option that will enable multi currency, but I would be careful and certain you want to do this. I only use this option if one of my requirements is that 1 entity member deals in more then one currency.
Long and short of it is it can be done.
regards,

How to add new price break lines to existing PO quotations?

Hi,
I am using a custom interface (to insert quotations data into PO headers/lines interface tables) and PO documents open interface to create PO Quotations in Oracle.
I need to modify this interface to:
1. Update existing price break lines for a quotation line.
2. Add new price break lines to existing quotation line(which may/may not have exsiting price break lines).
Please let me know:
1. What modifications need to be done to the existing code.
2. What values needs to be passed to the action columns in PO_HEADERS_INTERFACE and PO_LINES_INTERFACE for above scenarios?
Any ideas/help will be appreciated.
Thanks
Imran

Hi Imran,
I have done a similar exercise for BPA price breakup.. Let me know if you need that as reference. I can share that :).. Please provide your personal mail id..
Regards,
S.P DASH

Price break based on order volume

Hello gurus -
I'm trying to set up a discount structure that grants price break percentages to various products (the percentage differs by product) based on total order volume.
I have a modifier created in our test instance, but it only applies the discount to each line once the $ threshhold is reached, not the order as a whole.
An example of what I'm looking for:
Order total between $100,000 and $249,999
Item A: 3%
Item B: 2%
Order total between $250,000 and $500,000
Item A: 6%
Item B: 5%
thanks much,
cb

Create a group level modifier and the discount will apply based on the group on the order.
Srini C

Multi-currency bidding & capturing price break-up in condition

Similar Messages

Maybe you are looking for