Multi Line Reports
Hello
Dears
I want to print numbers upto 1000 , the problem is that it takes many pages to print. I want to print them in little pages having more number columns instead of one column per page?
how would this be possible?
Please an immediate response will be appreciated.
Rehman Ghani
Pakistan
Hello,
I just suggested to changfe the Repeating Frame property "Print Direction" and set it to across down.
If only one number is printer on each page, your problem may be related to the elasticity of an enclosing frame
Use the Vertical Elasticity expand or variable .
Regards
Similar Messages
-
How to make multi-line report headings?
Hi all,
By default, Apex creates a single-line report heading for each column in a report. To minimize white space, multi-line column headings are sometimes appropriate. How can Apex be directed to split a column heading at certain place(s)?
Thanks,
Kim
P.S. I'm running Apex 4.2.2.See https://forums.oracle.com/message/11154533
-
hi,
I need to develop multi-line break reports like the following:
category 1)
===========
total completed
calls recd calls
line1) # of calls #
line2) % of calls %
line 3)
category 2)
===========
Dev. environment is Oracle DS 92i, W2k.
Thanks for any helpMay I should have elaborated further.
Hers is what we want. We want to tabulate a report with a total # of calls recd(in a support center). And then further break it into the calls in the order of response like responded less than an hour, upto 2 hour etc for each category of customers. So ideally we want the report to look like the following: The first line is a count and the next line is percentages of a total call recd. I have simplified only to 2 rows per category. Typically it runs to 5 lines (like in category3)for each category with more details. I have seperated each column by ',' since i can't post the formated output.
===================
colheading,total calls recd,< 1 hour,upto 2 hours,>2hours
category1,1000,420,300,280
category1,83.33%,42%,30%,28%
category2,200,125,50,25
category2,62.5%,25%,12.5%
category3:
line1
line2
line3
line4
line5
=================
In the above format i repeated category name in each heading which is not necessary. I just put it so that it doesn't confuse
Hope it is clear
Thanks for your help -
SQL*Loader: How to load multi-line report data?
Hi,
is it possible to use SQL*Loader to load data from a hierarchical structured fixed column ASCII file like this
001 scott
New York 01.01.2002 1234
Chicago 15.10.2001 9876
002 smith
Los Angeles 24.12.1999 5678
Washington 01.12.1999 0000
Chicago 01.01.2000 1111
into one database table:
id name city day code
001 scott New York 01.01.2002 1234
001 scott Chicago 15.10.2001 9876
002 smith Los Angeles 24.12.1999 5678
002 smith Washington 01.12.1999 0000
002 smith Chicago 01.01.2000 1111
The number of lines per name is unlimited, the next line starts after a separating ---- line.
We cannot change the format of the text file to import.
There is an example in the documentation that shows how to load a structure like the following via insert triggers:
001 scott New York 01.01.2002 1234
Chicago 15.10.2001 9876
002 smith Los Angeles 24.12.1999 5678
Washington 01.12.1999 0000
Chicago 01.01.2000 1111
But we have the name information on a separate header line, so I don't know if we can use a similar technique here.
regards
SvenTry enclosing your strings with e.g. a double-quote. To do so, the control file needs the following (example):
LOAD DATA
REPLACE
INTO TABLE test
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
id1,
id2,
id3,
id4,
)of course this does mean that your data must change...
L. -
Append table with multi-line cells to word report
Hi,
I am using LabView 7.0. I need to append table to word report and I am using Append Table to Report VI. My VI works fine as long as the table cells do not have multiple lines. For multiple lines, each line is put is a seperate cell in the word report.
Is there a way to append multi-line cells to Word Report??? If not, any suggestions on how I can copy the multi-line table to Word report???
Please kindly help!!
Please see the attached document for details on the problem.
Thanks,
Mim
Attachments:
Table with multiple line cells.doc 33 KBHi Mim,
Yes I understood the multiple-lines part. I think the doc is the report you want. Correct ?
The doc is generated with your VI without any modifications.
I am using XP, Office 2002 SP3 and LV7.1
Attachments:
Verification Report.doc 39 KB -
How to display multi line headings in procedural alv report
Hi experts,
How to display multi line heading in alv( procedural alv report) report.
some columns single line and some columns multi line in the same report.
ex:
solvent consumed solvent recovered
fresh | recovery recovery | spent batch no storage
I am using procedural alv .pls give me idea.Hi Ram,
Check the sample report [how to display multi line headings in procedural alv report|http://sample-code-abap.blogspot.com/2008/01/printing-multiple-line-header-and.html]
Thanks,
Duy -
Changine line widths in multi page reports?
I need to be able to change line widths on a "per channel basis" within a multi page report. Is there a script that I can use to do this?
Hey Zilla,
I'm not exactly sure what you're trying to do but I've written a short example that hopefully does something similar. It may not be the most efficient example but it should get you started. I assumed that by line width you're referring to the width of a plot on a graph in DIAdem Report. The following code changes the width of three plots on two graphs each on different sheets. The code is pasted below. I'm attaching the report template I used. It uses the default DIAdem dataset. If you have a different report the object names may be different. (The report template was created in DIAdem 9.1)
Call GraphSheetNGet(2)
Call GraphSheetRefSet(GraphSheetName)
Call GRAPHObjOpen("2DAxis1")
for i=1 to 3
Call GRAPHObjOpen("2DObj1_Curve" + s
tr(i))
D2CURVELINEWIDTH ="35.0"
Call GRAPHObjClose("2DObj1_Curve" + str(i))
next
Call GRAPHObjClose("2DAxis1")
Call GraphSheetNGet(1)
Call GraphSheetRefSet(GraphSheetName)
Call GRAPHObjOpen("2DAxis1")
for i=1 to 3
Call GRAPHObjOpen("2DObj2_Curve" + str(i))
D2CURVELINEWIDTH ="35.0"
Call GRAPHObjClose("2DObj2_Curve" + str(i))
next
Call GRAPHObjClose("2DAxis1")
Call Picupdate
I hope this helps!! If this isn't what you're trying to do please post back with more information so I can try to help.
Regards,
Sarah Miracle
National Instruments
Attachments:
DIAdemExample.TDR 52 KB -
Comments & multi-line text not showing up on summary report
My multi-line answers and comments are not showing up on my summary report
Hi;
The summary report does not show the text based answers. This isn't something FormsCentral supports.
If this is an important feature for you, we do have a "Feature Request" form where you can vote on popular existing ideas or add a new one of your own:
https://adobeformscentral.com/?f=XnF-KJVCovcEVQz9tZHYPQ
Thanks,
Josh -
How to Remove the /Div in a Multi-line Field when reporting in Excel, getting
I am uisng Excel Services to extract data from PS2013. And the Multi-line text fields include the </Div> syntax. I have looked at a lot of the links regarding how to do this. I have even borrowed code that was on someones blog.
When I try and use it I get the following message and cannot not seem to resolve it after reading varous links regarding this issue.
Any ideas? As a work around I have created an Excel Macro to remove it, however would like to solve it in the query
Error Message
The data types
Nvarchar and Ntext are incompatible in the add operator
Here is the syntax
declare @Headxml nvarchar(350)
declare @Footxml nvarchar(50)
set @Headxml = N'<?xml version="1.0"?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"
[<!ENTITY nbsp " "><!ENTITY quot """>]><html><body>'
set @Footxml = N'</body></html>'
SELECT ProjectOwner.ProjectUID as [ProjectUID],
ProjectOwner.ProjectName as [Project Name],
ProjectOwner.[Project Number] as [ECP#],
TaskRelated.TaskName as [Task Name],
MSP_WssRiskToTaskLinks_UserView.RiskID as [Risk ID],
MSP_WssRiskToTaskLinks_UserView.Title as [Risk Title],
MSP_WssRiskToTaskLinks_UserView.Status as [Status],
MSP_WssRiskToTaskLinks_UserView.AssignedToResource as [Assigned To],
MSP_WssRiskToTaskLinks_UserView.Owner as [PM],
MSP_WssRiskToTaskLinks_UserView.DueDate as [Due Date],
MSP_WssRiskToTaskLinks_UserView.Probability as [Probability],
MSP_WssRiskToTaskLinks_UserView.Impact as [Impact],
MSP_WssRiskToTaskLinks_UserView.Exposure as [Exposure],
MSP_WssRiskToTaskLinks_UserView.Cost as [Cost],
MSP_WssRiskToTaskLinks_UserView.CostExposure as [Cost Exposure],
MSP_WssRiskToTaskLinks_UserView.Category as [Category],
ISNULL(LTRIM((CONVERT(xml,(@Headxml+MSP_WssRiskToTaskLinks_UserView.[Description]+@Footxml),3)
.value(N'(/)','nvarchar(4000)'))),'') AS [YourMulti-lineCustomFieldNewName],
MSP_WssRiskToTaskLinks_UserView.MitigationPlan as [Mitigation Plan],
MSP_WssRiskToTaskLinks_UserView.ContingencyPlan as [Contingency Plan],
MSP_WssRiskToTaskLinks_UserView.TriggerTask as [Trigger Task],
MSP_WssRiskToTaskLinks_UserView.TriggerDescription as [Trigger Description],
MSP_WssRiskToTaskLinks_UserView.CreatedDate as [Created Date],
MSP_WssRiskToTaskLinks_UserView.CreateByResource as [Create By],
MSP_WssRiskToTaskLinks_UserView.ModifiedByResource as [Modified By],
MSP_WssRiskToTaskLinks_UserView.ModifiedDate as [Modified],
TaskRelated.TaskUID as [TaskUID],
TaskRelated.TaskName as [Task Name],
TaskRelated.TaskStartDate as [Task Start],
TaskRelated.TaskFinishDate as [Task Finish] FROM dbo.MSP_WssRiskToTaskLinks_UserView
LEFT OUTER JOIN dbo.MSP_EpmProject_UserView AS ProjectOwner ON ProjectOwner.ProjectUID = MSP_WssRiskToTaskLinks_UserView.ProjectUID
LEFT OUTER JOIN dbo.MSP_EpmProject_UserView AS ProjectRelated ON ProjectRelated.ProjectUID = MSP_WssRiskToTaskLinks_UserView.RelatedProjectUID
LEFT OUTER JOIN dbo.MSP_EpmTask_UserView AS TaskRelated ON TaskRelated.ProjectUID = MSP_WssRiskToTaskLinks_UserView.RelatedProjectUID
AND TaskRelated.TaskUID = MSP_WssRiskToTaskLinks_UserView.RelatedTaskUID LEFT JOIN dbo.MSP_WssRelationshipType ON
MSP_WssRiskToTaskLinks_UserView.RelationshipTypeID = MSP_WssRelationshipType.RelationshipTypeID
ORDER BY ProjectOwner.ProjectName ASC, MSP_WssRiskToTaskLinks_UserView.RiskID
Andrew PayzeHi Andrew,
We normally create a function to do this. Some examples can be found here:
http://blog.sqlauthority.com/2007/06/16/sql-server-udf-user-defined-function-to-strip-html-parse-html-no-regular-expression/
http://lazycoders.blogspot.co.uk/2007/06/stripping-html-from-text-in-sql-server.html
http://stackoverflow.com/questions/457701/best-way-to-strip-html-tags-from-a-string-in-sql-server
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
Multi line text custom field is not coming in ms project Professional
Pradeep,
You cannot access Multiline text fields from Project Professional and in Project Server Views. These fields are for use in Project Details pages and with workflow for demand management in Project Server. Please refer to the article shared in earlier post.
I would recommend you to create a Excel/SSRS report if you would like to show data available in this fields to end users.
Hope this helps.
===================================================
Thank you,
Kiran K.
If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful -
XML Publisher Multi tab Report: Help needed
Hi,
I have a requirement like below--
Need to develop master detail XML Report in R12. O/P will be in excel.
Excel output having two Work sheet.
Some columns data must be non editable in excel output ,whereas some columns will be editable.
User must not be able to add any line manually in the report.
Can anyone pls help me out to find a way to build this?????????
Thanks
TitasHi Titas,
Any luck with this? Were you able to create a multi-tab report using XML Publisher? Any help on this will be greatly appreciated.
Thanks. -
How to create a dynamic multi-line function in SQL Server
I am attempting to create a Multi-Line Function in SQL Server that accepts a dynamic WHERE clause as a parameter. I need this so that the function can be as versatile as possible for the filter that needs to be applied. I am unfortunately getting an error
upon creation of the function. I don't know how to solve the problem. Can someone advise me?
SQL:
SET
ANSI_NULLSON
GO
SET
QUOTED_IDENTIFIERON
GO
-- =============================================
-- Author:
-- Create date: 2/3/2014
-- Description: This multiline function will accept a generic WHERE Clause and apply it to the query for return.
-- =============================================
CREATE
FUNCTIONTESTMULTILINEFUNCTION
@WHEREvarchar(1024)
,@CHANGEDDATEasdatetime
RETURNS
@TESTTABLE
TABLE
IDint
,REVint
AS
BEGIN
Declare@SQLSTRINGvarchar(4096)
SET@SQLSTRING=''
SET@SQLSTRING=@SQLSTRING+'SELECT
REVS.ID, REVS.Revision
FROM
Select distinct result.ID, Max(Rev) as ''''Revision''''
FROM
Select * from dbo.BugsAll
where
[Changed Date] < @CHANGEDDATE
) result
GROUP BY result.ID
) REVS
join dbo.BugsAll BA on (BA.ID=REVS.ID AND BA.REV=REVS.revision)'
IF
(@WHEREisnotnullOR@WHERE<>'')
BEGIN
SET@SQLSTRING=@SQLSTRING+'
WHERE '+@WHERE;
END
INSERT@TESTTABLE
EXEC
(@SQLSTRING)
RETURN
END
GO
ERROR:
Msg 443, Level 16, State 14, Procedure TESTMULTILINEFUNCTION, Line 44
Invalid use of a side-effecting operator 'INSERT EXEC' within a function.
Senior Test Lead -- Microsoft>> Unfortunately I really need to form a dynamic query in a table valued function on the SQL SERVER. I have another tabled valued function that needs something returned as a table in order to further join the data. I am not allowed to use Stored
Procedures in that function. <<
You do know that real SQL programmers hate the proprietary nightmare of tabled valued functions? This is how you procedural programmers avoid learning set-oriented declarative and functional programming.
Your mindset wants to write to a scratch tape or disk file (aka “tabled valued function result table”) just like you did BASIC, FORTRAN or COBOL. QL programmers do not have to materialize their data. We can use VIEW or a drive table as well as a base table.
>> Plus, there are occasions where I don't want to pass in a field [sic: columns are not fields] parameter or need to change a parameter list such that I don't wish the table function to filter by a particular field [sic] or other setting. <<
What you want is a magical “Automobiles, Squids and Lady Gaga” function. An SQL programmer might write a complex VIEW then do simpler SELECTs off it.
>> My application pushes the WHERE clause from EXCEL to SQL to do the hard work as EXCEL is not the application in which I want to process the SQL statement and pass it via ODBC. I cannot run macros in Excel on the web.<<
This is a crazy language system. Usually we fetch data in SQL and then pass it to a math package, report writer, etc. We never keep logic (aka WHERE clauses) outside the database.
>> I am bummed about the fact that this feature doesn't work. It will up my server management costs to maintain unique tabular based functions based on WHERE clause query <<
So stop writing those “tabular based functions”, change your mindset and start learning SQL and do it right.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Multi line custom field badly saved to database
Hello community,
we're fighting currently against a strange issue.
All projects has some multi line custom fields to fill every week for project status.
During this exercise, some of the comments seems not well saved to database.
While coming back to the PDP, we are seeing a strange behavior :
Starting from that, I tried to look in the database and the saved html format is badly formatted, you can see a </div> in the middle and a missing one at the end of the sentence:
<div>Révision et approbation de l'ODS de Facilité.</div> <div> </div></div> <div>Compléter le questionnaire à soumettre aux experts.</div>
<div> </div> <div>Présentation et choix des experts.
As of now, we did not find any reason why this is happening.
While opening back the PDP in edition and saving back ,the problem is solved.
This is annoying because we are treating the html code as xml for reporting as seen here (http://aboutmsproject.com/converting-rtf-to-text-in-sql-revisited/
) and this is crashing because of badly formatted html code
any advices?
regards
JéromeHi Jerome,
I've seen this issue occur when text is pasted into the field from other applications, like Outlook and Word. I've not yet been able to determine how to get it to stop. The error then causes the invalid XML issue you are seeing. A former co-worker had successfully
integrated the use of jQuery into PDPs. I'm wondering if they have a HTML clean function.
Thanks for finding my post useful!
Treb Gatte, Project MVP, Tumble Road LLC |
@tgatte | http://AboutMSProject.com -
Multi line HTML data formatting on SSRS reprot
Hi
I am using SQL Server Reporting Services 2008 , data fetching by Project server database,data value is getting by multi line rich text field.
when showing same data in HTML format
on ssrs reports its shows every style what ever user copy and paste on particular field like font size ,colors and them.
I have requirement to show unique font size and unique family font,I am unable to achieve this using lot of placeholder properties.
below u can find the example
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| TwitterHi Hasan,
According to your description that the some of the report data retrieved by multi line rich text field, which style show differently in the report, you have tried to create the placeholder using the HTML tag to format the data
but failed to achieve, right?
The issue due to the rich text formatting is not supported in SSRS 2008, Currently, you have mentioned that you tried to using the HTML tag to reformat the text but failed, that may due to Reporting Services support limit HTML tags when defined as placeholder
text. Please see:
• Hyperlinks: <A href>
• Fonts: <FONT>
• Header, style and block elements: <H{n}>, <DIV>, <SPAN>,<P>, <DIV>, <LI>, <HN>
• Text format: <B>, <I>, <U>, <S>
• List handling: <OL>, <UL>, <LI>
In your scenario, I recommend you to take reference of method below to get the unique format text.
Check the supported HTML tag and using the correct tag to format
If you want to get the RTF format:
If using Report Viewer Windows control, we can render the RTF file into IMG file, and then display the image on the report.
Nayan Patel written good artilce about this:
http://binaryworld.net/Main/CodeDetail.aspx?CodeId=4049
This article give us the idea to convert RTF to image and then display on the report.
You can also convert the RTF text to the plain text which by default in the report:
Article have details method about the convert for your reference:
http://stackoverflow.com/questions/2987501/rtf-to-text-in-sql-server
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0f70e01f-6315-400c-bc75-c7da5f324062/displaying-rtf-text-in-a-ssrs-2008-report?forum=sqlreportingservices
Similar threads for your reference:
RTF in SSRS - SQL 2008 R2
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0f70e01f-6315-400c-bc75-c7da5f324062/displaying-rtf-text-in-a-ssrs-2008-report?forum=sqlreportingservices
Personally, I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/. If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next release of SQL Server. Your feedback is valuable for us to improve our products and increase
the level of service provided.
Thanks for your understanding.
Regards
Vicky Liu -
Multi Line Menu Item and Button
Dear oracle developers,
I am trying to set a multi line label for
a button.
The label should be displayed as
Client
Reports rather than Client Reports
on the screen.
I tried CHR(i) for all the 255 ascii numbers.
I get some special characters inbetween but never got a new line.
Can any one have some ideas about this. I would like to use the same feature for a menu item also.
Thank You.
Srini S. SundarHi,
U can do this in the following way :
1. Create a Icon button in your Forms canvas.
2. create a icon file (.ico) by writing a multiline text.
3. Attach this .ico file to the icon button in your forms.
Hope this may help you.
sandip.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Srini Sundar:
Dear oracle developers,
I am trying to set a multi line label for
a button.
The label should be displayed as
Client
Reports rather than Client Reports
on the screen.
I tried CHR(i) for all the 255 ascii numbers.
I get some special characters inbetween but never got a new line.
Can any one have some ideas about this. I would like to use the same feature for a menu item also.
Thank You.
Srini S. Sundar<HR></BLOCKQUOTE>
null
Maybe you are looking for
-
Any way to get favicons in Safari 6.0 bookmarks bar yet?
Lack of favicons in bookmarks bar is the #1 reason (of many) why I don't like using Safari....but as long as Chrome continues to have crash issues with rMBP (and now Flash stopped working in the 22.0.1229.2 dev version), I'm stuck with it for some th
-
OS 10.7.2 thinks Data DVD is blank, but it isn't!
I have a brand new Macbook Pro and I've encountered a baffling problem. A data DVD (containing multiple PDF's) shows up as a blank writable disc on this computer. I decided to run Parallels with Windows 7 (on the same MBP) and the disc showed up wi
-
Windows 8.1 does not show podcasts using iTunes 11.4
I just installed Windows 8.1 + itunes 11.4 and the podcast section does not display any podcasts.
-
Custom Report Item CustomData evaluation problem in a subreport loop
Came across a strange problem with the custom report item CustomData property evaluation when using a sub report loop. I have a master report, which contains a sub report component within a List. The List is bound to a dataset from which a numeric va
-
The condition record for use B can not be displayed
Hi gururs, What does this message (number : VE896 ) mean ? How to make it desapear ? P.S : it's about output type for purchase orders. This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N. Regards, Bahia.