Multi-month, year, and date-range views
My apologies for wasting everyone's time if I've missed something really obvious here, but am I correct in concluding that there is no way to generate anything beyond a static one-month view in iCal? No multi-month view? No year view? No "view date range"? At this stage of the game, how is it possible that something so elemental could be omitted from this program?
At this point I'm reduced to exporting each month to a pdf file and then arranging them as tiles on the screen. But there has to be a better way.
Short of a new version from Apple, are there any plug-ins that would do this? Does anyone have any other work-arounds? Thanks in advance.
A quick search of the forums shows that this is a HIGHLY sought after feature (including by me). We all need to use the feed back link (below) to let Apple know this. In my experience with the tech support folks, they seem to have NO idea about what these forums say. In the past I have actually had them log in to these forums and search the issue I was calling them about and they have been blown away when they see the hundreds / thousands of posts with the very same thing they're discussing with me. So, as the wise man says .. "you don't ask, you don't get!" Use the form and let them know...
http://www.apple.com/feedback/ical.html
Similar Messages
-
FM to get previous fiscal month/year and calendar month/year for a date.
Hi All,
I am having a requirement to extract some data based on either the previous fiscal month/year or the previous calendar month/year. There is no company code input to find the fiscal/calendar month/year.
At selection screen, user can select either fiscal or calendar selection.
Based on the selection, the data will be extracted.
For the system date, we need to calculate previous fiscal month/year or previous calendar month/year and populate the calculated data back to the selection-screen.
Can you one of you please suggest an FM to find previous fiscal month/year and previous calendar month/year.
Thanks in Advance,
Regards
GowthamiHi Gowthami,
You can use following function module to calculate previous / next day or month or year.
call function '/SAPHT/DRM_CALC_DATE'
exporting
date = sy-datum
days =
months =
sign = '-'
years =
importing
calc_date = .
Here, you can give '-' to sign, if you want previous day / month / year.
Here, you can give '+' to sign, if you want next day / month / year.
And depending upon your requirement, you can pass suitable value to days / month / year.
e.g. To calcualte last month,
call function '/SAPHT/DRM_CALC_DATE'
exporting
date = sy-datum
days =
months = 1
sign = '-'
years =
importing
calc_date = wv_prev_month.
so it will give '23-01-2008' . Then convert it in the required format as per your requirement using string function concatenate.
Hope this help you.
Regards,
Anil -
How to derive date from given month, year and day?
Hi all,
I have a doubt in date function. I need to create a date from the given month, year and day. How can i do it?consider this example
REPORT zconvertdate001 .
TYPES : BEGIN OF tt_date_in,
day(2),
sep1,
month(3),
sep2,
year(4),
END OF tt_date_in.
DATA : wa_date_in TYPE tt_date_in VALUE '07-Jul-2006'.
TYPES : BEGIN OF tt_date_out,
day(2),
month(2),
year(4),
END OF tt_date_out.
DATA : wa_date_out TYPE tt_date_out.
TRANSLATE wa_date_in-month TO UPPER CASE.
SELECT SINGLE mnr
INTO wa_date_out-month
FROM t247
WHERE spras EQ sy-langu
AND ktx EQ wa_date_in-month.
CONCATENATE wa_date_in-year wa_date_out-month wa_date_in-day
INTO wa_date_out.
WRITE : / ' Date in:', wa_date_in,
/ 'Date out:', wa_date_out. -
Setting date,month,year and time
How do i change the Date /month/year and time on my printer.
My printer is Laser Jet Professional M1212 nf mfpPlease to here and download the User Guide.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=3965849&
Here you will find all you information you requested.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Assign Month within a date range (by most days in a given month)
I have a begin and end date, sample data as such
select to_date('01-13-12','mm-dd-yy') from_dt,
to_date('02-23-12','mm-dd-yy') to_dt
from dual
union all
select to_date('03-15-2012','mm-dd-yy') from_dt,
to_date('04-16-2012','mm-dd-yy') to_dt
from dual
union all
select to_date('05-13-2012','mm-dd-yy') from_dt,
to_date('07-23-2012','mm-dd-yy') to_dt
from dual
How do I assign a month by the most days in a month within that date range? Sometimes the date range might have the exact same amount of days in a month (like 3/15/2012 has 16 days and 4/16/2012 has 16 days). In this case, I want the earlier month (march).
So from the sample data:
01/13/2012, 02/23/2012, February
03/15/2012, 04/16/2012, March
05/13/2012, 07/23/2012, June
Thanks
Edited by: user4422426 on Mar 1, 2012 5:15 PMHi,
Here's one way:
WITH cntr AS
SELECT LEVEL - 1 AS n
FROM (
SELECT 1 + MAX (to_dt - from_dt) AS max_day_cnt
FROM table_x
CONNECT BY LEVEL <= max_day_cnt
, got_r_num AS
SELECT x.from_dt, x.to_dt
, TRUNC (x.from_dt + c.n, 'MONTH') AS month
, count (*) AS cnt
, ROW_NUMBER () OVER ( PARTITION BY from_dt, to_dt
ORDER BY COUNT (*) DESC
, TRUNC (x.from_dt + c.n, 'MONTH')
) AS r_num
FROM cntr c
JOIN table_x x ON c.n <= x.to_dt - x.from_dt
GROUP BY x.from_dt, x.to_dt
, TRUNC (x.from_dt + c.n, 'MONTH')
SELECT from_dt, to_dt
, TO_CHAR (month, 'Mon YYYY') AS mon
, cnt
FROM got_r_num
WHERE r_num = 1
;Thanks for posting code to create the same data. Please test your code before you post it: you got the order of arguments to TO_DATE reversed. -
How to derive month/year from date in SAP BW 3.5 data flow
Hi
How we can derive cal year/month and fiscal month/year from date in SAP BW 3.5 data flow (we're using transfer and update rule)..
Thanks,
PKHi,
if you have any date filed in source side you can just map to any time char system will automatically convert to target objects.
please look at the screen shot for understanding. (not 3.x it is 7.x)
Thanks,
Phani. -
Return current period based off of current fiscal year and date
Good Afternoon,
Is there a way in the webi that I can create a dimension that always reflects the current Fiscal Month based of Fiscal year and date? I have a report that I am trying to show sales for a customer based off the current fiscal month. I would like this report when refreshed to be based off this fiscal month dimension instead of showing each fiscal month or changing it manually. What is the best way to do this?
I have attached an image that shows current numbers by period (month) and then the YTD Totals. I would like to have my 'Period' column always reflect the current period and the Total column to reflect that months totals based off the period column. So for this period (3), instead of seeing 3 lines for each month I would just see the '3' and the total as $541,310.46, monthly as 412,502.09 and my YTD as 1,080,091.06.
Any help is always appreciated!
Thank you,
TiffanyHi,
Create a variable
FlagVar=If([Period]=Max([Period]) In Report;"Show";"Hide")
And apply block filter of FlagVar=Show
Are these coming TotalSales MonthlyGoal YTDSales directly from universe? If they are calculated at report level then you might want to use NoFilter. like =NoFilter([YTDSales]) -
I am working on the following query
SELECT report_date, EXTRACT (MONTH FROM report_date) FROM program_details;
SELECT a.customer_id, a.report_date as change_date
FROM program_details AS a
LEFT JOIN program_details AS b
on a. customer_id = b. customer_id
AND EXTRACT (MONTH FROM a.report_date) = EXTRACT (MONTH FROM b.report_date) - 1
AND EXTRACT (YEAR FROM a.report_date) = EXTRACT (YEAR FROM b.rpt_date )
WHERE a.code_status = 'Gold' and b.code_status = 'Plat'
AND a.report_date >= '2007-12-01 00:00:00.0'
AND a.report_date < '2009-01-01 00:00:00.0'
I have a table with customer id, yyyy-mm-dd for many years , and status as gold silver or platinum. and I need to work out the month that the status changed, and return a field as year-month.
I am trying to extract the year and date that a customer changed from gold to plat but I am not sure how date arithmetic works. I need to have output like : customer_id and year-month but I keep just getting month.
I know this is vague, but if you could help with the part of the query that delivers year and month back that would be great.
Thank you very muchHi,
1 SELECT a.customer_id, to_char(a.report_date, 'yyyy-mm') as change_date
2* FROM program_details a
SQL> /
CUSTOMER_ID CHANGE_
1 2009-06Bartek -
How to calculate a week & Month in given date range (not for sele-options)
Hi ,
I have defined 2 date parameters in sel-screen (Plz remember that date variable are not a SELECT-OPTIONS). Now i want ot display week nos & monts in output.
Ex: date1: 20080101 & date2: 20080229. then
weeks : 1, 2, 3,---9.
months: jan-08, feb-08.
Plz help me with block of code or any FM.
Regards,Hi Srikanth,
The FM HR_99S_INTERVAL_BETWEEN_DATES is doesn't existing, but there is a fm HR_MX_INTERVAL_BETWEEN_DATES but it returns no of Years & Days.
But i found some FM which r returns no of months for given date range. but my requirement is, want to display the month no bw 1 to 12. (ex: dat1=15-03-2008 & dat2= 01-06-2008 then in month fields 03,04,05 & 06. ).
Plz help me on this.
-Regards. -
How to get Quaters of the year if give month year and number of quarters
My requirement is if i give the input month, year and number of quarters i want the previous quarters. Is there is any function module to get the quarters if we give month and year and number of quarters
Thank you.Pradeep,
Use the Fm TSTR_PERIODS_QUARTERS and pass the year into the IMPORT PARAM IT_YEARTAB-TSTR.
U will get the begin & End dates of each quarter...
reward if helpful,
Karthik -
Default selection on current month, week and date
Hi,
We are on Dashboard 4.1 sp3 the same version as BI.
The dashboard report is using LiveOffice connection. We are now facing an issue with default selection on current month, week and date.
The dashboard report drilled down from month, to week, then to date. The dashboard feed -live office report is on month/week/date ascending order - becuase we have running average calcualtion on LO report, it seems have to be in ascending order to get the correnct runnning average.
I tried to on Insertion to change default seletion, it works on month, but it doesnt working on week and daily.
but when LO report is on ascending order, on dashboard column chart the default selection is not on the current month, week and date.
Is there a way to solve the issue. Could anyone please help.
Thanks,Hi Suman,
Thanks for the quick reply.
Do you mean I Enable sorting -by categrory labels on Behaviour - common tab.
Thanks, -
CURRENT YEAR SALES DATE PARAMATER AND PRIOR YEAR SAME DATE RANGE
I am pulling data from a SQL view dbo.view that has current and historical SOP data by line. The date paramater is a date range, uppr date and lower date formulas are in the report. I need to include prior year SOP data for the same prior year date range in the detail. I have tried adding the view in twice with no luck, just duplications. Ultimately I want to supress the detail and only show the totals by customer so it is comparitive. Thanks for your help. Jayne
OK
lets simplify it
get a test data source with some simple dates in it.
get the report logic working.
it looks like you have the right formula ideas but lets go for
@upperthisyear
@upperlastyear
@lowerthisyear
@lowerlastyear
then assuming a date field of {table1.date}
the record selection would be
if (@upperthisyeare > {table1.date} and @lowerthisyear < {table1.date}) or (@upperlastyeare > {table1.date} and @lowerlastyear < {table1.date}) then 1 else 0
I would test this by using it as a formula field with the test data. -
Extract Month & Year From Date
Hi All,
I have a key figure quantity and i want the data on date,for the month and for the year.
i create the variables for the date,for the month(ie from date to date) and for the year(ie, from date to date) seperatly that means i have three input variables which may sometimes create confusion.
My problem is that I want to enter only date and the variable itself calculate the month and year from the date so that it returns the data as desired above.
for eg. : Now i to enter date : 3/14/2009
enter MTD (FROM/TO) : 3/01/2009 - 3/14/2009
enter YTD (FROM/TO) : 4/01/2008 - 3/14/2009
I want to enter only date : 3/14/2009
and the variable itself extract the month and year till date.
and also the same variable calculates number of days so that need not to take the formula variable of date difference to calculate the average qty.
Neha..Hi,
1. Create User Entry Variable on 0CALDAY : Name = ZCDAY.
2. Craete a Customer Exit Variable on 0CALDAY: Name = ZMTD.
3. Craete a Customer Exit Variable on 0CALDAY: Name = YMTD.
Properties of Customer Exit Variables.
Variable reporesents = Single
Variable Entry = Mandatory
Processing By = Customer Exit.
Character = Calender Day
Here I'm thinking that ZKF is your key figure.
In columns you create two selections one is for MTD and other is for YTD.
In MTD selection, drag and drop ZKF and Drag and Drop 0CALDAY and then Right Clcik and Restrict-->
Selection = Value Range. (In Between) and restrict with the follwoing Variables
[]ZMTD; ZCDAY.
In YTD selection, drag and drop ZKF and Drag and Drop 0CALDAY and then Right Clcik and Restrict-->
Selection = Value Range. (In Between) and restrict with the follwoing Variables
[]YTD; ZCDAY.
Then write the following code in I_STEP = 2.
DATA: ZT_DT1 TYPE SY-DATUM,
ZT_DT2 TYPE SY-DATUM,
ZT_SDT TYPE SY-DATUM,
ZT_YR(4) TYPE N,
ZT_DY(2) TYPE N,
ZT_MT(2) TYPE N,
ZE_TT(2) TYPE N,
ZPOPER TYPE POPER,
ZRELJR TYPE RELJR.
WHEN 'ZMTD_A'.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
IF sy-subrc = 0.
CLEAR: l_s_range.
ZT_DY = '01'.
ZT_SDT = loc_var_range-low.
ZT_MT = ZT_SDT+4(2).
ZT_YR = ZT_SDT+0(4).
CONCATENATE ZT_YR ZT_MT ZT_DY INTO ZT_DT1.
l_s_range-low = ZT_DT1.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDLOOP.
WHEN 'ZYTD'.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
IF sy-subrc = 0.
CLEAR: l_s_range.
ZT_DY = '01'.
ZT_SDT = loc_var_range-low.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
I_DATE = ZT_SDT
* I_MONMIT = 00
I_PERIV = 'V3'
IMPORTING
E_BUPER = zbuper
E_GJAHR = zbdatj
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
I_GJAHR = zbdatj
I_PERIV = 'V3'
IMPORTING
E_FIRST_DAY = ZT_DT2
* E_LAST_DAY =
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
l_s_range-low = ZT_DT2.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDLOOP.
Thanks
Reddy -
SSRS expression for today,yesterday,Lastweek ,Last fortnight,Last Month, Year to date
Hi All;
I have a field called createdon
Using this field i need to create the SSRS expression for the table as below
Any help much appreciated
Thanks
Pradnya07use expressions as below
assuming this is to be done in SSRS
Today
=COUNT(IIF(
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
Yesterday
=COUNT(IIF(
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
LastWeek
=COUNT(IIF(
DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
Last fortnight
=COUNT(IIF(
(DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1)
Or (DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-2),Fields!YourRequiredField.Value,Nothing))
Last Month
=COUNT(IIF(DateDiff(DateInterval.Month,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Month,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
Year To Date
=COUNT(IIF(DateDiff(DateInterval.Year,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Year,Cdate("01/01/1900"),Now())
And
DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) <= DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Count days in a month for a date range
i am trying to find no. of days between 2 Date Ranges for a list of Ids. i used the logic in the below link:
count days of the month
My query is giving duplicates since, I have list of Ids.
Doctor_ID Patient_ID ARRIVE_DT_TM DISCH_DT_TM
755722 42972229 10/18/2012 7:50 3/14/2013 20:45
763305 42972232 1/7/2013 20:27 3/15/2013 19:15
25391509 42972298 2/4/2013 22:45 3/8/2013 22:03
746779 42972331 1/4/2013 23:00 3/26/2013 21:50
763305 42972338 3/4/2013 22:19 3/6/2013 19:35
763305 42972411 11/4/2013 22:32 3/29/2013 17:30
I am looking for query to give me for Patient_ID = 42972229
MONTH COUNT_DAYS
201210 14
201211 30
201212 31
201301 31
201302 28
201303 14
I am running the following code and it loops through the months and gives duplicates when I remove where Patient_id IN (42972229)
select
Doctor_ID
, Patient_ID
, AR_DTTM
, DSC_DTTM
, TO_CHAR(ADD_MONTHS(TRUNC(date1, 'MONTH'), LEVEL - 1), 'YYYY MM') MONTHS_BET
, (LEAST(date2, ADD_MONTHS(TRUNC(date1, 'MONTH') - 1, LEVEL)) - GREATEST(date1, ADD_MONTHS(TRUNC(date1, 'MONTH'), LEVEL - 1)))+ 1 AS DAYSCOUNT
from (select
Doctor_ID
, Patient_ID
, ARRIVE_DT_TM AR_DTTM
, DISCH_DT_TM DSC_DTTM
,TRUNC(ARRIVE_DT_TM,'DDD') AS date1
,TRUNC(DISCH_DT_TM,'DDD') AS date2
from temp where Patient_id IN (42972229)
CONNECT BY LEVEL <= MONTHS_BETWEEN(TRUNC(date2, 'MONTH'), TRUNC(date1, 'MONTH')) + 1
Please help!Hi,
ASTRA_007 wrote:
Results I would like to see are:
Doctor_ID Patient_ID ARRIVE_DT_TM DISCH_DT_TM Month CountofDays
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2012 10 14
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2012 11 30
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2012 12 31
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2013 01 31
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2013 02 28
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2013 03 14
763305 42972232 1/7/2013 20:27 3/15/2013 19:15 2013 01 25
763305 42972232 1/7/2013 20:27 3/15/2013 19:15 2013 02 28
763305 42972232 1/7/2013 20:27 3/15/2013 19:15 2013 03 15
and so on...So each row represents a patient-month, and you want to display several columns from the temp table on each output row. In that case, include all those columns in both the SELECT and GROUP BY clauses, like this:
WITH universe AS
SELECT *
FROM temp
-- WHERE patient_id IN (42972229)
, date_range AS
SELECT TRUNC (MIN (arrive_dt_tm)) AS first_date
, TRUNC (MAX (disch_dt_tm)) AS last_date
FROM universe
, all_dates AS
SELECT first_date + LEVEL - 1 AS a_date
FROM date_range
CONNECT BY LEVEL <= (last_date + 1) - first_date
SELECT u.doctor_id
, u.patient_id
, u.arrive_dt_tm
, u.disch_dt_tm
, TO_CHAR ( TRUNC (a.a_date, 'MONTH')
, 'YYYY MM'
) AS month
, COUNT (*) AS count_days
FROM all_dates a
JOIN universe u ON a.a_date BETWEEN TRUNC (u.arrive_dt_tm)
AND u.disch_dt_tm
GROUP BY u.doctor_id
, u.patient_id
, u.arrive_dt_tm
, u.disch_dt_tm
, TRUNC (a.a_date, 'MONTH')
ORDER BY u.patient_id
, TRUNC (a.a_date, 'MONTH')
;Output from your sample data (with no filtering):
`DOCTOR_ID PATIENT_ID ARRIVE_DT_TM DISCH_DT_TM MONTH COUNT_DAYS
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2012 10 14
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2012 11 30
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2012 12 31
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2013 01 31
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2013 02 28
755722 42972229 10/18/2012 7:50 3/14/2013 20:45 2013 03 14
763305 42972232 1/7/2013 20:27 3/15/2013 19:15 2013 01 25
763305 42972232 1/7/2013 20:27 3/15/2013 19:15 2013 02 28
763305 42972232 1/7/2013 20:27 3/15/2013 19:15 2013 03 15
25391509 42972298 2/4/2013 22:45 3/8/2013 22:3 2013 02 25
25391509 42972298 2/4/2013 22:45 3/8/2013 22:3 2013 03 8
746779 42972331 1/4/2013 23:0 3/26/2013 21:50 2013 01 28
746779 42972331 1/4/2013 23:0 3/26/2013 21:50 2013 02 28
746779 42972331 1/4/2013 23:0 3/26/2013 21:50 2013 03 26
763305 42972338 3/4/2013 22:19 3/6/2013 19:35 2013 03 3
In the end the objective is to count the no. of days in each month between the arrival and discharge dates by Physician and for his/her patients.Then is the output above really what you want? Say you're interested in physician 763305. That physician had 18-patient days in March, 2013, but the output doesn't make it clear.
I ran your query, it works great but I have a long list of patients for whom I have to run these counts.the query above includes all patient_ids.
That's a separate problem, to be solved in the first sub-query, universe. The rest of the query will be unchanged.
How will you know which patients to include? If you can derive the list from temp itself, just use a WHERE clause in universe. If you need to look at other tables, join them in universe, or use them in sub-queries in universe, or both.
For exmple, if you decide that the list of patient_ids has no pattern, and that you'll need to store their ids in a separate table (perhaps a global temporary table), then universe might be:
WITH universe AS
SELECT t.* -- or list columns needed
FROM temp t
JOIN patient_ids_to_include p
ON p.patient_id = t.patient_id
) ...The rest of the query can be the same as above.
If a same patient is admitted again then Patient_ID will be different no matter when readmitted.Are you saying that patient_id identifies a visit, not a patient, and that the same person is assigned a different patient_id every time that person is admitted?
For
INSERT INTO temp (doctor_id, patient_id, arrive_dt_tm, disch_dt_tm)
VALUES ( 755722
, 42972229
, TO_DATE ('03/14/2013 23:00', 'MM/DD/YYYY HH24:MI')
, TO_DATE ('04/01/2013 12:00', 'MM/DD/YYYY HH24:MI')
First the Patient ID will be different from the earlier admission. Second the results will show like:
Doctor_ID Patient_ID ARRIVE_DT_TM DISCH_DT_TM Month CountofDays
755722 42972229 3/14/2013 23:00 4/1/2013 12:00 2012 03 14
755722 42972229 3/14/2013 23:00 4/1/2013 12:00 2012 04 1Are you saying that temp.patient_id is unique, and so the situation is impossible?
Edited by: Frank Kulash on May 7, 2013 10:23 AM
Maybe you are looking for
-
I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?
-
Is there any way to recover data from bad ipod hard drive?
My 60GB iPod photo shows a sad iPod icon, will not connect to iTunes and will not charge. I have recently replaced the battery and it was working for a day, but now I keep getting the sad iPod icon. If I take the hard drive out and connect it with a
-
hi friends i am using java version 1.5 and sun application server 8.5.... I am beginner learning ejb...when i try to call a ejb program from jsp i m encounting the prob with the line <% HelloHome hh=(HelloHome) PortableRemoteObject.narrow(obj,HelloHo
-
I have an itunes gift card that I want to check the value so I know which card I am giving to whom. Is there a I can find the value without removing the security strip?
-
How do I change the default notifications?
When I make an event on a day in iCal I get a default notification of an audio alert. How can I change it to a default email alert?