Multi paper format support
Hello Gurus
I need to create adobe forms that should support North-America letter format as well as Europeen A4 format.
Letter format is 8.5 inches X 11 Inches (215.9 mm X 279.4 mm)
A4 format is 8.26 inhes X 11.69 Inches (210 mm X 297 m)
1. Is it possible to determine the paper size based on the user location?
2. For the header itself, it is not a huge problem. It is always at the top of the paper regardless of the paper format.
3. But for the footer, I would like to have the footer at the end of the docuement regardless the paper size.
Example: At paper length - 1 inch.
4. Is it possible to horizontally centralize the body part of the form based on the paper width.
5. Furthermore, the form should support several languages. But this is another story.
Step by step and/or example would be highly appreciated.
Regards
Daniel
Hi Daniel,
We are using our global Adobe Forms worldwide and across different paperformat-countries (what a word).
When we went to Mexico with our forms, which is also a US-Letter-country, we in fact asked ourselves exactly the same question. Our target was to definitely not copy the forms just because of a different paper format.
As time was very short during that roll-out, and a solution on form-side would have needed more time for investigation than we had, we decided for the most pragmatic approach.
All printers in that location were already standardized to HP printers. So we just implemented a setting on all printers "OVERRIDE A4/LETTER" --> YES. With this setting deployed the printers didn't stop when receiving a "wrong paper format, they just printed on US-Letter.
In addition we changed the layout (print area) of our global forms to be a little wider and a little shorter, in order to fit on both formats.
Now we're facing a project to replace all existing forms in US and Canada, and of course the same question arises. But also here we're lucky to have our printers standardized. So again we'll choose the printer setting approach.
In the meantime we found some time to do more investigation on the topic. Result: using the xdc and xci configuration on the ADS server we didn't find a solution. The only thing that we still have left for investigation is doing something inside the form using Java script.
regards
Similar Messages
-
Does LabVIEW support Multi Document Format
Hi
I had a doubt that does LabVIEW support Multi Document Format like Microsoft Word, execel etc.
please reply me with some solution if anyone has
With Regards
AvniYes, I know very well what MDI is, I just don't know what Multi Document Format is
Programs like word, excel, etc support reading/writing of files in multiple formats (e.g. *.doc, *.rtf, *.txt, etc. for word or *.xls, *.csv, etc. for excel), so the question could be along these lines. I guess we have to wait for the original poster to come back to clarify.
LabVIEW Champion . Do more with less code and in less time . -
Error in determining Paper Format for Printout triggering from ABAP Code
Hi Experts,
I am trying to trigger a printout from my ABAP code using "NEW-PAGE PRINT ON ...... NEW-PAGE PRINT OFF" statement.
I am passing the Print Parameters using the FM "GET_PRINT_PARAMETERS" as below:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = ls_options-tddest
copies = 1
list_name = 'Notification'
list_text = 'ERROR NOTIFICATION'
immediately = 'X'
release = 'X'
new_list_id = ' '
* expiration =
line_size = 79
line_count = 23
layout = 'X_65_80'
sap_cover_page = ' '
receiver = 'SAP*'
department = 'System'
no_dialog = 'X'
IMPORTING
out_parameters = lv_params.
But I am facing a problem. Though I am passing X_65_80 to the LAYOUT in the Function Module, it is trying to print in LETTER format. But the specified printer as the printer supports only A4 paper format and as a result, I am not getting any printout.
Kindly help me with your suggestions to resolve this.
Thanks in advance.
Regards,
KeerthiHi,
I just found that this problem is even stranger.
I am able to print the said message on my local printer but when I try to print the same message on a different printer located at a different location, the printout does not get triggered. I am not getting any error messages also in this case.
What could be the possible reason for this?
Kindly share your views/experience with me on this one.
Thank you.
Regards,
Keerthi -
How to print text in paper format iin smartforms
Hi all,
I want a question that how to print text in paper format like paper divides into 2 parts and if the firstpart is full of text i.e., it exceeds the first page the text will be displyed in the second part of the first page.
Usefull answers will be awarded.
Thanks all...Hi,
U create two windows in the page and same as like second page.
but in first page first window select the condition print only on first page.
in second window select conditin print only on second page.
first try without creating a secondpage. if that doesn't workout create secondpage and try.
Assign points if useful.
Regards
(YUGANDHAR.P) -
I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you
Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige -
I am directed The document “Video.MOV” could not be opened. The movie's file format isn't recognized
QuickTime Movie (.mov)
MPEG-4 (.mp4, .m4v)
MPEG-2 (OS X Lion or later)
MPEG-1
3GPP
3GPP2
AVCHD (OS X Mountain Lion only)
AVI
DV
MPEG-2 (OS X Lion or later)
MPEG-4 (Part 2)
H.264
H.263
H.261
Apple ProRes
Apple Pixlet
Animation
Cinepak
Component Video
DV
DVC Pro 50
Graphics
Motion JPEG
Photo JPEG
Sorenson Video 2
Sorenson Video 3
Am so confused the above our media formats supported
I have MacBook Pro with operating system X Mountain lion 10.8.2 is there another app that I can use? Thank you, MaryIt could be you're not adding the files the right way. In more seldom cases:
[Topic : MP3 Scan+Repair - an ID3 tag evaluator for the Mac|http://discussions.apple.com/thread.jspa?threadID=2020936]
MP3 Scan+Repair (including sources): [http://triq.net/mac/mp3-validator-mac-os-x] -
Does USD NACHA CCD Plus Format support one single payment with one vendor?
Hi,
We are implementing USD NACHA CCD Plus Format file for my customer.
Have the following query:
Does USD NACHA CCD Plus Format support one single payment with one vendor and another single payment with
different vendor in single file or will it generate two files for two payments or will it support single payment only.
Can anyone help us in this regard.
Thanks,Venkat.I have created one invoice1 with one vendor and another invoice 2 with
different vendor processed the PPR using USD NACHA CCD Plus Format .
Both two payments came single file.
But we know that USD NACHA CCD Plus Format support Single Payment only.
Can anyone help us in this regard.
Thanks,Venkat -
Smartform output in news paper format
Hi All,
How to print the data in the main window of a smartform in news paper format like First colum some data and second colum some data(after filling the first column data).
Regards
maheshHi,
This can be done using table nodes with appropriate line types and table widths designed as per the news paper format.
Also in what kind of structured way the data is passed onto the smartform interface matters here.
Suppose you have the data required for the first column in a single table then use appropriate table width as required for the first column of the news paper format.
Then adjacent to it use another table storing the data required for the second column.
This way you can display the data in a news paper format.
Regards,
Ram -
Messages in multi-message format can only be sent to one Adapter Engine
Hi,
Using XI 7.0 SPS 12 I have a scenario Single Flat File->XI->Multiple Messages to ECC.
Due to an annoying limitation/bug in ECC we have to send workorders in to be processed as individual transactions. This means generating seperate calls to ECC from PI.
I've adjusted my message map (No BPM) to split the source messages out, but when it calls the XI adapter to send them to ECC I get the following:
<!-- Technical Routing -->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>
Messages in multi-message format can only be sent to one Adapter Engine
</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I am generating multiple structures under
messages/message1/xx_my_structure_repeated_at_this_level
which gives the correct amount of payloads in moni.
I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls. Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?
Thanks
James.
Points awarded where appropriate.<i>I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.</i>
Perfectly correct
<i>Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?</i>
May be writin a module.
Otherwise to avoid other development time, go for BPM.
Regards,
Prateek -
I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"
Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person. -
I got data from OTF in SAPSCRIPT and send by email.
How to change the paper format in SOST tcode from X_65_80 to X_65_255?
I need to change it automatically from abap.
Any suggestion?Hi,
change line size and line count in report.
By default report line size and line count is taken in printer
settings
REgards
amole -
Populate vo values in multi colum format
Hi,
I created a VO and now i want to present the values in multi column format with radio button for each value fetched from query .
I tried using message component layout.But i was not successful in doing .
I want in the following format
attibutename value1(radiobutton) value2(radiobutton) value3(radiobutton)
attibutename value1(radiobutton) value2(radiobutton) value3(radiobutton)
attibutename value1(radiobutton) value2(radiobutton) value3(radiobutton)
attributename is :i must give some xyz name and value1(radiobutton)..must be fetched from VO.
Can any one explain me in step by step aprroach of getting this done .
ThanksThis can be done by :
1)If the sql query where condition does not have to many rows, u can use two VO approach, one for display and another for rendering.
2)Use flowlayout in each column of table in ui to attach a radio button and the table VO column value.
But I still wonder whats' ur eaxct requirement? y u wanna this?
--Mukul -
Payment file formats supported by SAP in Europe-France, Belgium, Italy, Spa
Hi Friends,
Any information on payment file formats preferably DME formats supported by SAP would be great, specially following Europe countries:
France
Belgium
Italy
Spain.
If anyone has imeplemented following formats in SAP for the following countries, can you pl. share your experience as well as implementation effort for this?
UCV - Belgium
CFONB160 - France
Norma 34 - Spain
CDI/Bonfica - Italy
Thanks and regards,
Pinkyhi
check this Note 395679 - PMW: Overview of available formats -
Messages in multi message format can be sent to one adapter engine only
Hi All,
I am doing the scenario File to IDoc ,picking the .CSV file from the FTP server .
The problem is that the file is picking fine from FTP ,but getting an error in SXMB_MONI as : Messages in multi message format can be sent to one adapter engine only. What could be the reason and how to rectify it . Please provide me the solution ASAP.
My Source strucure :
MT_Source_File_Sender 1..1
Record 0..Unbounded
Business 1..1
Line 1..1
Curency 1..1
Date 1.1
etc....
My Target IDoc: ORDERS.ORDERS05
ORDERS05 1..1
IDOC 0..99999
EDI_DC40 1..1
E1EDK01 1..1
Thank You.
Regards,
Bharat KumarPlease check the blog below
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
and the following thread
CO_TXT_MMF_ENGINETYPE error in file to proxy ?? -
Multi message format Error Message
"Messages in multi message format can be sent to one adapter engine only"
This is the error message i am getting in sxmb_moni while checking the status of message.
cud ne one help me out y this error is comin what can be the reason behind the same.Hi Indu,
Check this similar thread which talks about the same problem:
CO_TXT_MMF_ENGINETYPE error in file to proxy ??
Regards,
Subhasha
Maybe you are looking for
-
Assignment of BEx 7 connection parameters in unicode system
Hi, experts! We faced the following problem: There is a BEx 7 workbook on BI-server. We use this WB to save data in DSO with remote function module. To call the this FM, in VBA-function we create an object r3 like u201CSAP.Functionsu201D.This object
-
JSObject missing in Forte 1.3
Hello All, Very tired at the moment, so hoping someone can kickstart my brain, preferably with an answer to a problem that I'd probably be able to solve given 10 hours of sleep... Using the community version of Forte 1.3. Just built an applet (extend
-
Hai all. I have just finished sitting for my certification exam and passed with high marks. I have one study guide that I wrote myself for the exam. I can give to you if you need it. bye.
-
Hi Experts, How to assign ABAP programs and customized transactions to authorization groups. R3 4.71, oracle 9.2.0.7, Sun Solaris. Can some one help me... Thanks in advance. . .
-
More N82 Issues..
This is getting beyond a joke now. I seem to have a problem where by the following: 1. Bluetooth works for a couple of days, then won't turn on. "Unable to perform bluetooth operation" 2. When ever I use mass storage mode or PC Suite mode, the phone