Multi selection in result lists

Hello,
in some resultlists like in the result list for opportunity search multiselection is possible.
In the result lists in CRM Service multiselection is not possible.
Example:
BT116S_SRVO/AdvancedSRL
Could one of you experts please share the experience if it is possible to have multiselection also available on result lists where the SAP standard does not support it?
Thanks a lot.
Kind regards
Manfred

Hi all,
in component SRQM_INCIDENT_S in the result list there is a method EH_ONSELECT with this code:
method eh_onselect.
data: lv_event type ref to cl_htmlb_event_tableview,
        lr_comp_controller         type ref to cl_crm_srqm_common_s_comp_ctrl
lr_comp_controller ?= me->comp_controller.
if lr_comp_controller->mv_multi_selection_mode eq abap_true.
    lv_event ?= htmlb_event.
    gr_result_list_cnode->eh_on_row_selection( iv_htmlb_event    = lv_event
                                               iv_htmlb_event_ex = htmlb_event_ex ).
else.
    super->eh_onselect(
      htmlb_event = htmlb_event
      htmlb_event_ex = htmlb_event_ex
endif.
endmethod.
lr_comp_controller->mv_multi_selection_mode is abap_false in debugging therefore the super->eh_onselect is called.
But i´m still not able to mark one or multiple lines. It just don´t mark anything.
I already tried to disable this method - but this had no effect for my issue.
Thank you.
Kind regards
Manfred

Similar Messages

Multi Selection from a List Box to a Text Box

So I want to be able to make Multi Selections within List box and export it to the Text box. Right now I have a Script running on the cal of the Text Box
event.value = getField("LISTBOX").valueAsString;
Which is able to do one selection but I cant find anybody that can grab two selecitons and put into a text box with commas for something. Is there a way to do this?
-Zach

Wow over my head a little. I understand what an array is with script but not how to write the script to handle it. I made this:
event.value = getField("LISTBOX").value;
But still no change in the behavior with multi selections. Example below if you want to check it out.
https://dl.dropboxusercontent.com/u/2944617/formtext2.pdf

Multi-Select (drop down list) data not saving upon save/email

I have created a drop down list and modified it to allow multiple selection, i.e.
form1.BusinessAreaTable[1].Row1[4].ERP::ready:form - (JavaScript, client)
this.ui.choiceList.open= "multiSelect"; this.rawValue
= "-1"
However, when I go to save the form and/or email the list fields erase and the data / items I selected are gone.
Please help, thanks.

Okay, I have the form now.
You are using script in the form Ready event to make a dropdown list mimic a listbox. This is totally unnecessary. I have changed the ERP to a multi-select listbox in the Object > Field palette and commented out the script.
Here is the form: https://acrobat.com/#d=K*P4xKIA4kkqEHGTpgyvvw
The form has not been Reader Enabled, so user with Reader will not be able to save the data inputted or submit by email in PDF format:
Summary here:
http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
Niall

Processing Multi Select LOV Results in Portal Forms

Hi,
I want to be able to create a portal form where i can use a multi-select LOV to create multiple records on a seperate table. How does one 'capture' all selected items so that one can do a seperate insert into a child table containing the items? When querying the form how can one programmatically set the items so that they appear as selected.
Thanks

Hi,
Were you able to fix this up? If so, can you please provide me some directions?
Thanks
Kamlesh

Pass values fromSharePoint list multi-selection list box to Infopath Multi-selection list box and back

Design overview:
List A
InfoPath Library - Form A
SharePoint Designer workflow
List A has a multi-selection column with multi-values.
Form A has fields populated from the data in List A by using a data connection in the form. I have a workflow that updates the values or creates a new item in List A. All fields work except the mufti-selection. The multi-selection has ;# separating
the values and I am having trouble setting the list box properly(checking of the selecting values) instead it concats all values on one line. I basically need to get the multi-selection column from list 1 to show exactly in the Form A and be able to
update the selection with the workflow. I can do this with single values with no problem. the multi-selection list is difficult. I read somewhere I can use a repeating table but I am not sure the workflow will work with that. That is only a read and not
a write.

Wow over my head a little. I understand what an array is with script but not how to write the script to handle it. I made this:
event.value = getField("LISTBOX").value;
But still no change in the behavior with multi selections. Example below if you want to check it out.
https://dl.dropboxusercontent.com/u/2944617/formtext2.pdf

I need a code for Advanced Search based on my custom multi select listbox and query through programatically (jquery)with out design

Hi,
I have a grid and advanced search link buttonand
search button.
if i click on Advanced Search link...open a panel with 3 list boxes(multi selection)
if i select multi selected items in list boxes and click on search-->show the grid with selected items
getting data from Sql server custom database.
And the code i wil expect is 'Programatically using jqury and asp.net code' with out single line of design.
Could you please help on the above task.

Hi,
I have a grid and advanced search link buttonand
search button.
if i click on Advanced Search link...open a panel with 3 list boxes(multi selection)
if i select multi selected items in list boxes and click on search-->show the grid with selected items
getting data from Sql server custom database.
And the code i wil expect is 'Programatically using jqury and asp.net code' with out single line of design.
Could you please help on the above task.

LOV in @prompt not allowing multi selections

Post Author: johnson77
CA Forum: Desktop Intelligence Reporting
@Select(Expense Report Line Items\ERL Expense Category) IN ( @prompt('Select Category(s) from list or key in % for All Categories','A','Expense Types\Expense Category',Mutli,free) )or '%' IN ( @prompt('Select Category(s) from list or key in % for All Categories','A','Expense Types\Expense Category',Mutli,free) )
Issue #1, The above prompt is NOT allowing multi selections from the list. (in desktop or webi versions)
Issue #2, The above prompt allows for all selection by using the % which works on desktop version, but not Webi.
Any clues to why on either of these issues.
BusinessObjects 6.5

Post Author: GregPye
CA Forum: Desktop Intelligence Reporting
Hi
If the code above was pasted from the code that actually runs, then I would suggest it could be because you have spelt "multi" incorrectly... not sure if DeskI would through that up as an error, or just ignore it!

Multi-Selection in Tlist....

Hi Everyone,
I want to know who to enable multi-selection in a List Item whose List Style is Tlist. I want that user can select multiple items from a list by holding shift button or control button. How can I implement this?
Please help!
Thanks a lot.
Imran

You can't do it with the default t-list.
There is a component that you can use that does this, it comes with the standard Forms demos that you can download from otn smaple code section.

Using Multi Select List in SQL Query

Hi all,
I am trying to using a Multi Select list for filtering of a report. I have :P2_RISK_SEVERITY which has has the possibility of values Very Low:Low:Medium:High:Very High. How do I use this Multi Select in the where section of a SQL query?
I need to say something along the lines of:
Select RISK_SEVERITY from TBL_RMD_RISKS where RISK_SEVERITY = (one of the options selected in the multi select)
Thanks for the help.

Hi there,
The above suggestion will work perfectly as long as the table you're querying is relatively small, but keep in mind that applying the INSTR to the left side of the WHERE clause will always result in a full table scan. This means that if your table is large and RISK_SEVERITY is indexed, the index will never be used. Here is another approach (credit to AskTom) that converts your colon-delimited string of selected values to a list that can be used in an "IN(...)" clause, which will use an index on RISK_SEVERITY as long as the optimizer otherwise deems it appropriate:
-- creates a type to hold a list of varchars
CREATE OR REPLACE TYPE vc2_list_type as table of varchar2(4000);
-- converts a colon-delimited string of values to a list of varchars
CREATE OR REPLACE FUNCTION vc2_list(p_string in varchar2)
   return vc2_list_type is
   l_string       long default p_string || ':';
   l_data         vc2_list_type := vc2_list_type();
   n              pls_integer;
begin
   loop
      exit when l_string is null;
      n := instr(l_string, ':');
      l_data.extend;
      l_data(l_data.count) := ltrim(rtrim(substr(l_string, 1, n - 1)));
      l_string := substr(l_string, n + 1);
   end loop;
   return l_data;
end vc2_list;
-- your WHERE clause
where risk_severity in(
         select *
           from the(select cast(vc2_list(:P2_RISK_SEVERITY) as vc2_list_type)
                      from dual))
...Hope this helps,
John

Populate multi select list in on demand application process

Hi all,
To populate a multi select list we use this code:
DECLARE
l_counter number;
l_o_name varchar2(2000);
l_val varchar2(100);
BEGIN
l_val := wwv_flow.g_x01;
owa_util.mime_header('text/xml', FALSE );
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
htp.prn('<select>');
FOR rec IN (
SELECT DISTINCT DECODE(districtscode,NULL,'- Onbekend -',districtscode) as "NAME"
, DECODE(districtscode,NULL,'-2',districtscode)as "ID"
FROM table
WHERE (UPPER(dienstcode) =(l_val)
or l_val = '-1')
and objectsubcategorie_id in (select objectsubcategorie_id from table where ind_actief = 'J')
and ind_uitgesloten is null
UNION
SELECT '- Alle districten -', '-1'
FROM DUAL
ORDER BY 1
LOOP
htp.prn('<option value="' || rec.ID || '">' || rec.NAME
|| '</option>');
END LOOP;
htp.prn('</select>');
END;
However: L_val is determined by a multiselect list. So, L_id can be: 'A:B:C'. I can convert the value of l_id to 'A','B','C' (with eg replace function). However in a where clause one cannot say: WHERE UPPER(dienstcode) in l_val. So I created a refcursor which I put in a pl/qsl table. Then I looped through the pl/sql table.
Somehow this did not have the same results. Eventhough the refcursor gave back the same data which I tested by logging the values of the pl/sql table just before the htp.prn command, the htp.prn did not return the values.
Does anyone know why this happens? Is there a difference between the for loop in this code and looping through a self defined pl/sql table?
Thanks in advance
Maurice

Please, anybody could help me with this?
Thank you!

Multiple Selection in Search Result List in PCUI

Hi,
Our requirement is to allow creation of new records in list view of the PCUI application CRMM_ACCOUNT. I'm using old floor plan CRM 4.0 to meet this requirement. But this is causing a problem. It's not allowing multi select in the search result list (Event INIT, Screen Element SRMS). If I change the screen element to SRME, it allows multiple selection (thru selection checkboxes) but does not allow creation of new records in list view.
Also, how to activate the multi-valued search on certain fields. I've already checked the "Multi-Value" check box for the relevant field.
Any help on this will be much appreciated.
Regards,
Vishal

a®s wrote:
Hi,
You can find lot of thread in this for forum for your query.
example
a®s
Thanks ! it's helpful! But my requirement is a little bit different. (Sorry I didn't make it clear)
I created a table maintenance (SM30) for a table. The F4 Search help should be applied to a field of the table when a user creates a new entry. I hope it makes clear.
btw: I have awarded some points! Because it's also good to know some other ways:)

Can I create a multi-selection list using a dynamic list of values?

I'm reading section 19.7.3 from the dev guide - it explains how to create a selectOneListbox using a dynamic list of values. Is it possible to create a multi-select listbox from a dynamic list of values?
What I would like to do - I have a read-only view object with a hard-coded query - I would like to display the results of the query in a dropdown list box, or dropdown list box with boolean checkboxes, to allow the user to select multiple items from the list. How can I accomplish this?
thanks

Hi JavaX,
I don't know of any JSF components (at least not any ADF Faces components) that lets you do multiple selection in a drop-down. There is an af:selectManyListbox, but it does not render as a drop-down.
John

Multi-select lists, their return values and showing their display value

I have a multi select list which is dynamic. The display and return values are pulled from a table where the return value is the Primary Key.
When people select a few options, the value is stored in session state as 11:12:13 (etc...). From here, I run these numbers through a process which takes a report ID and the multi-select string, and saves individual rows as Report_id, individual multi select value until there are no more multi select values.
This is great, they're tied in as a foreign key to the LOV lookup table, and they are easily search able.
I have trouble where I want to list a report's entire multi-select list. I have a function combine the numbers with a : in between them and RTRIM the last one, so I have an identical string to what a multi-select table uses. 11:12:13 (etc..)
When I assign it to display as an LOV in a report, it just shows the 11:12:13 instead of listing out the values.
Single number entries, where someone only selected one option in a multi select, display fine.
Am I doing this wrong?

Scott - you're right on the money. I did this initially because I thought assigning an LOV display value to a report column would yield the results I wanted.
I want to do this without referring to the original table... meaning I don't want a function to have to go out and get the names, I'd like my LOV assignment to do it. This saves headache of having to change something in 2 places if it ever changed.
Am I not going to be able to do this?
I created a test multi-LOV page, it doesn't work with original(not processed in my function) LOV assignments either, unless you only select one.

SSRS 2012: How to get a "Select All" that returns NULL instead of an actual list of all values from a multi-select parameter?

I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- Mark

I adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ","))

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

Multi selection in result lists

Similar Messages

Maybe you are looking for