Multi source appraisal

Hi All,
I've configured a appraisal model as a multi source appraisal model  and given the required KRAs.
However when i give transaction APPCREATE, the system says "system cannot edit multi source appraisal".
Please can any one provide a clue on this ?
Regards,
RAM

Thanks Revathi,
I've confiured this appraisal catalog in sand box and hence not required to release.
When i use transaction APPCREATE, the system presents all the existing appriasal catalogs. but when i select the relevant catalog(One with multi source) then the system throughs an exception saying "system cannot edit multi source apprisal"?
Please can you elaborate on the trouble shooting ?
Regards,
RAM

Similar Messages

  • The quest for a good multi-source video workflow

    I frequently have to mix together several sources, and the Multi-Camera Source Sequence in Premiere Pro should in theory be the best way to go.
    However, it's seriously underdeveloped and for a single camera with separate audio, I end up doing a sequence instead.
    Mix and scrub audio in Audition, tag and comment source video in Prelude, import both to Premiere Pro and put them together on a sequence so I can use that sewuence as a source for other sequences.
    Why don't I use a multi-camera sequence? Because you have to tag syncronization points before you put everything together, because audio and video is often recorded out of sync, with several video recordings per audio recording etcetera. It ends up a mess. We don't live in an ideal world, and not wanting to waste time (and make the talent lose focus) organizing things, recording happens pretty much on the fly with all that includes in differing methods, ideals and so on. We need to know how to cut resources (and this includes not using the most exåensive editing tools) but there's always room for improvements.
    I like to slap everything loosely together post-production and fine-sync on audio waves on the run, but this means you can adjust the multi-camera source sequence after you have put it together.
    This isn't possible in Premiere Pro, at least not without putting it into a sequrnce first and that's the next step you want to do after all the syncronizing is done, not something you want to while cutting up the sources in a sequence.
    I believe most of what I need for this is already programmed but it's mostly a matter of politics. Just please understand, synchronizing and preparing sources is different from working with a sequence, but it can be a substantial piece of work on it's own and it's not enough to just put it together in a menu and think that's all fine. (And not by far at that.)
    What I need is to be able to edit a multi-camera source sewuence on a timeline like I would edit any other sequence. And call it a multi-source sequence, it isn't just video.
    Then audio from different sources can be mixed together on the timeline like you do in a sequence, expoerted to audition as a multi-track session for more advanced audio processing (and no, single tracks aren't enough, I often need the real-time effects in audition not just the processing of whole tracks. And I mix together several audio sources, both mono and stereo tracks some from cameras but mostly from a separate, 24-bit audio recorder with inputs from hand or tie mics, environment and perhaps a gun with a boom. (I'm the audio guy with perhaps a camera on the side, others handle the main camera(s).
    And video from several cameras can be put together, one track per camera on a timeline and not just one clip per track, one camera can have several clips taken on a timeline.
    Then, when all this is put together it can be used as a source, like we use a multi-camera sequence today.
    I believe it's possible, and would increase the value of your offers. If this isn't done, I may end up looking for other software.

    Hi gino_76ph,
    You can compare different Nokia phone models and their features on Nokia developer website. Just follow the link below:
    http://www.developer.nokia.com/Devices/Device_specifications/?filter1=all
    Audio player features can be found under multimedia section, with differences highlighted.
    Hope this helps,
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Error - Generating WebI report with Multi-Source universe (.unx)

    Hello ,
    While creating WebI report from multisource universe (.unx) , created using
    relational connection with SAP BW JCO connector , following JCO exception is
    cropping up
    Database error: [Data Federator Driver] [Server] [Connector 'Test_RCN_01'] SAP
    NetWeaver BW has reported an exception: com.sap.conn.jco.JCoException: (101)
    JCO_ERROR_CONFIGURATION: Server configuration for DF_SERV-bitest-3300-NOSNC is
    already used for a running server. (IES 10901) (WIS 10901)
    Steps followed for Multi-source universe creation
    1. creating relation connection ( Passed)
    2. Creating Data foundation using this connection (passed)
    3. Mapping two parameters (programIDMapping, hostname ) with RFC destination and
    BW FQDN ( passed )
    4. Creating Business layer for this Data foundation (passed)
    5. Open webintelligence with SSO and while creating the reports using the .unx ,
    the above error is coming
    already implemented SAP note no 1638647
    System used
    SAP BW 7.1 with EHP 1 and SP 10
    SAP BI 4.0 SP2
    Data federation service admin tool version 14.0.2
    thanks,
    Rajib

    Hi,
    try with this.
    Starting the Gateway Service on the Message Server resolved this issue.
    There have also been reports of this issue when name resolution issues occur between the client and the Message Server machine.  As a test, you can add the Message Server name and IP address to the Windows\System32\Drivers\etc\hosts file.
    Or check SAP note 1590518.
    Thanks,
    Amit

  • [TEM] Creation of Multi - Lingual Appraisal Models

    Hi Experts! (Zsolt? )
    We need Multi- Language Appraisal models so that end-user in the ESS portal can choose what language they prefer during maintenance of appraisal form for BEs.
    In our Appraisal Catalog, there are already created identical Appraisal Models but in different languages. In English and in German.
    When I assign Appraisal models in PP01 to BETs, I can only choose 1 of these Appraisal Model (English or German). So the Appraisal model that appears in the Portal can only be English or German depending on what you've assigned to the BETs in PP01. Users cannot choose whether they prefer appraisals in English or German.
    We are trying to implement a functionality where users can choose the language they want.
    How do I do this? Does it involve customization of the Appraisals Catalog table.
    Many thanks!
    Points to those who can help.
    Regards,
    Olekan

    Hi Olekan,
    to do the assignment with several Appraisal models to one BET is not this easy thing. Let me explain you why:
    You can assign to one BET two different app. models ->
    > BE appraisal
    > Attendee appraisal
    These are related to the BET with different relationships. The point now is that you can assign with PE transasction (PVD0) ONLY ONE APP.MODEL TO ONE BET WITH THE SAME RELATIONSHIP.
    Theoretically you can do more by changing the Time constraint of this relationship. I think you will be able than to assign more App. Model in PP01  after changed the Time constr. BUT THIS IS NOT A PE TRANSACTION. Whether the application will enable you to choose from these realted objects while running it is not sure. This is a design issue, that the PD transaction (PP01) and the PE transaction (PVD0) don't have the same logic.
    I can show you another example to understand my point of view:
    if you create a Web-link to the Event in PE transaction while creating an event you are able only attaching one link. BUT if you do maintaining in Change modus on the event in PP01 you will be able to assign more Web-links..
    In this case the situation works, you are able to page between the links later, the multi-assignment is accepted by the app.
    Please check whether in our case the app. accepts the multi assignment with PP01 and whether you are able to show on ESS portal side the option to choose.
    Best regards,
    Zsolt
    null

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

  • How to implement multi-source XSLT mapping in 11g PS3 BPEL  ?

    Hi
    How to implement multi-source (single destination) XSLT mapping in 11g PS3 BPEL ? Is there any good example step by step ?
    thx
    d

    Hi d,
    Also there's a sample available at samplecode.oracle.com mapper-105-multiple-sources.zip.
    Regards,
    Neeraj Sehgal

  • Designing the multi-source universe taking long time

    Hi
    I'm facing problem with IDT, when designing the multi-source universe time. It's so slow when I tried to click on dimension to change description in Business Layer.Universe backend is Oracle and SQL DB.
    How should I do to increase IDT performance at design time?
    Version IDT: 4.1 Support Pack 2

    Hi Sreeni,
    Do we have a single Adaptive Processing Server containing all services?
    How is the APS split and sized?
    Regards,
    Manpreet

  • Multi Source execution plan build issue

    Hi,
    I am trying to create/build a multi source (homogenous) execution plan in DAC from 2 containers for 2 of the same subject areas (Financial Payables) from 2 different EBS sources. I successfully built each individual subject area in each container and ran an executin plan for each individually and it works fine. Now I am trying to create 1 execution plan based on the DAC steps. So far I have done the following:
    - Configured all items for both subject areas in the DAC (tables, tasks, task groups, indexesconnections, informatica logical, physical folders, etc)
    - Assigned EBS system A a sifferent priority than EBS system B under Setup->Physical Data Sources
    - I noticed that I have to change the Physical Folder priorities for each informatica folder (SDE for Container A versus SDE for Container B). I assigned system A a higher priority
    - Build the Execution plan..
    I am able to build the execution plan successfully but I have the following issues/questions:
    1) I assumed that by doing the steps above..it will ONLY execute the extract (SDE) for BOTH system containers but only have ONE Load (SIL and PLP)..and I do see that the SDEs are ok..but I see the SIL for Inder Row in RunTABLE running for BOTH...why is this? When I run the EP...I get an unique constraint index error..since its entering two records for each system. Isnt the DAC suppose to include only one instance of this task?
    2) When I build the execution PLAN, it is including the SILOS and PLP tasks from BOTH source system containers (SILOS and PLP folders exist in both containers)...why is this? I thought that there is only one set of LOAD tasks and only SDE are run for each (as this is a homogenous load).
    3) What exactly does the Physical folder Priority do? How is this different than the Source System priority? When I have a multi source execution plan, do I need to assign physical folder priorites to just the SDE folders?
    4) When we run a multi source execution plan, after the first full load, can we somehow allow Incremental loads only from Container A subject area? Basically, I dont want to load incrementally from source sytem A after the first full load.
    4) Do I have to set a DELAY? In my case, my systems are both in the same time zone..so I assume I can leave this DELAY option blank. Is that correct?
    Thanks in advance
    Edited by: 848613 on May 26, 2011 7:32 AM
    Edited by: 848613 on May 26, 2011 12:24 PM

    Hi
    you are having 2 sources like Ora11510 and OraR1211 so you will be having 2 DAC containers
    You need these below mandatory changes
    for your issue
    +++++++++++++++++++++++++++++++++
    Message: Database errors occurred:
    ORA-00001: unique constraint (XXDBD_OBAW.W_ETL_RUN_S_U2) violated while inserting into W_ETL_RUN_S
    You need to Inactivate 2 tasks in R12 container.
    #1 Load Row into Run Table
    #2 Update Row into Run Table
    +++++++++++++++++++++++++++++++++
    There are other tasks that has to be executed only once
    (ie Inactivate the Below in One of the container)
    SIL_TimeOfDayDimension
    SIL_DayDimension_GenerateSeed
    SIL_DayDimension_CleanSeed
    SIL_TimeOfDayDimension
    SIL_CurrencyTypes
    SIL_Stage_GroupAccountNumberDimension_FinStatementItem
    SIL_ListOfValuesGeneral_Unspecified
    PLP_StatusDimension_Load_StaticValues
    SIL_TimeDimension_CalConfig
    SIL_GlobalCurrencyGeneral_Update <dont Inactivate this> <check for any issues while running>
    Update Parameters <dont Inactivate this> <check for any issues while running>
    +++++++++++++++++++++++++++++++++++
    Task :SDE_ORA_EmployeeDimension_Addresses
    Unique Index Failure on "W_EMP_D_ADR_TMP_U1"
    As you are load from 11.5.10 & R12 , for certain data which is common across the systems the ETL index creation Fails.
    Customize the Index Creation in DAC with another unique columns (data_source_numID).
    ++++++++++++++++++++++++++++++++++++
    Task :SDE_ORA_GeoCountryDimension
    Unique Index Failure on "W_GEO_COUNTRY_DS_P1 " As you are loading from 11.5.10 & R12 , for certain data which is common across the systems the ETL index creation Fails.
    Option1) Customize the Index Creation in DAC with another unique columns (data_source_numID)
    ++++++++++++++++++++++++++++++++++
    This changes were mandate
    Regards,
    Kumar

  • Filtering multi source data in a Dashboard

    Hello,
    I want to create a dashboard with multi source data (Tables / XML files)
    Filtering data from one source it's easy, but what I want is to use the same criteria to filter the rest
    Each (Table / XML file) Will stored in a separate Excel Tab
    Example:
    Imagine we have to select:
    1- the business unit
    2- the Country
    3- the Project
    And then display charts with data from 5 different tables (XML files)
    I wanted to use macros -> impossible
    Please Help

    Hello,
    I want to create a dashboard with multi source data (Tables / XML files)
    Filtering data from one source it's easy, but what I want is to use the same criteria to filter the rest
    Each (Table / XML file) Will stored in a separate Excel Tab
    Example:
    Imagine we have to select:
    1- the business unit
    2- the Country
    3- the Project
    And then display charts with data from 5 different tables (XML files)
    I wanted to use macros -> impossible
    Please Help

  • When to upgrade DAC to 10.1.3.4 during new multi-source OBIA implementation

    I want to take advantage of the multi-source capabilities of DAC 10.1.3.4 on OBIA 7.9.5 as I need to bring in data from several production EBS instances. Do I need to create the Data Warehouse tables via DAC 7.9.5 or upgrade the Windows DAC client and Linux DAC server right after installation and proceed with the rest of the OBIA Installation and Configuration steps from Chapter 4? Also, given a Linux Informatica 8.1.1 Server, should the DAC client's INFA_DOMAINS_FILE point to the Linux domains.infa file instead of the dummy Windows one installed to create the pmcmd.exe executable?
    Thanks.

    You can only use the DAC 10.1.3.4 against an instance that is fully configured and running. This install is primarily intend to improve the ease with which to stand up additional Admin users. You must complete all of the steps first before you can install the standalone client (1. Install on Windows, 2. Migrate to Linux, 3. Run the Warehouse tool from the original Windows install (the preferred method).
    INFA_DOMAINS_FILE is only needed on the server instance. The client tools do not need it to communicate with the Services.
    Just to let you know you will not be able to connect to the Informatica 8.1.1 SP4 Server if it was not configured with a Fully Qualified Domain Name.
    The following note from My.Informatica.com (ID:18672) provides the resolution. Disregard the 8.1.0 specifics, it will work for 8.1.1
    Good luck,
    Damon
    Unable to use fully qualified server name to connect to domain using the PowerCenter 8.1 client
    Problem Description
    During the configuration of the domain in the PowerCenter 8.1 clients (Designer, Workflow Manager, etc.), the value for the gateway host is automatically reverted to the simple hostname. This can cause problems in a networked environment, like a WAN, where the fully qualified server name is needed( Example: server123 is used instead of server123.europe.informatica.com ).
    The following error may also occur:
    Unable to get repositories for domain xxxxx
    Error: [PCSF_46008] cannot connect to domain [xxxxx] to look up service [coreservice][DomainConfigurationService]
    Solution
    If there is only one client, changing the hosts file on the client machine is sufficient. On the client machine, in the file C:\WINNT\system32\drivers\etc\hosts , add the required line.
    Example:
    10.0.0.0 server123.europe.informatica.com
    To make a system-wide change, you need to modify the domain information in the following way:
    1.
    Go to \informatica\pc810\server.
    2.
    Run the infasetup backupdomain command.
    Example:
    infasetup backupdomain -da host:port -du user -dp password -dt Oracle -ds SID -bf domain.xml -dn domain
    Successfully backed up domain [domain] to file [domain.xml]
    3. Edit the xml file, and replace the existing <host> tag
    Example:
    Change <host>server123</host> to <host>server123.europe.informatica.com</host> .
    4.
    Save the xml file, and restore it into the domain with the command "infasetup restoredomain".
    Example:
    infasetup restoredomain -da host:port -du user -dp password -dt Oracle -ds SID -bf domain.xml -force
    Successfully restored domain [domain] from file [domain.xml] .
    5.
    Verify that the fully qualified hostname is listed in the file nodemeta.xml in \pc810\server\config
    6.
    Restart the Informatica services with the new server name
    Applies To
    PowerCenter 8.1

  • Correlation with multi sources

    Hi All
    I have a probloem like this
    I have one requirement that need to process with 2 messages but key field of 2 message that is not same at all like this.
    Msg 1
    <row>
             <f1>test_0</f1>
             <f2>test_0_f2</f2>
    </row>
    <row>
             <f1>test_1</f1>
             <f2>test_1_f2</f2>
    </row>
    and Msg 2
    <row>
             <f1>test_0</f1>
             <f2>test1_0_f2</f2>
    </row>
    <row>
             <f1>test_11</f1>
             <f2>test1_1_f2</f2>
    </row>
    I design by use BPM and use fork for multi sources. But after I testing it. I got log "Message being sent" with icon's clock. By corelation that I design by use f1 to involved both of message. But look like the key field of 2 message if that is not same, both of message will cannot pass fork step.
    Could you please suggest?
    Thanks
    Park

    Hi;
    Just a way around.
    For obtaining a correlation you can fetch in a dummy value from the database table.
    add <b>"111" as dummyvalue</b> to your select query.
    In teh row structure add this dummyvalue field.
    Mudit
    Award points if it helps

  • Is there anyone who does computational physics using numerical recipes  and multi source programming in c

    is there anyone who does computational physics using numerical recipes  and multi source programming in c++

    On an iPad?  I'd have to say no, since you can't compile C++ code on an iPad.

  • Multi-source with one itunes/Mac

    I know I can do multi-zone with AirTunes, but it can not do multi-source. Anyone has ideas on how to get two different sources at the same time with one iTunes library? i.e. iTunes radio in one room and downloaded music/video in another at the same time on one Mac.

    Hi Daz,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    It sounds like your wife and daughter may need to create an iCloud account to for their own contacts, calendars, notes, etc.
    Click on the link to see more details and screenshots. 
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Cheers!
    - Judy

  • BMM - Decision criteria on how to define LTS for a multi-source object

    I am curious to know what others use as their decision criteria when determining how to setup a BMM logical table that has multiple sources that map to multiple columns in the logical table.
    For example,
    If you have defined logical table Dim - Customer in the BMM that has 4 fields:
    Dim - Customer
    Customer Id
    Customer Name
    Customer Address
    Customer Phone
    The sources for this logical table from the physical layer are:
    CUSTOMER (all customers exist here)
    CUSTOMER_ADDRESS (A customer may or may not have an address, but can have only one address to simplify this conversation)
    CUSTOMER_PHONE (A customer may or may not have a phone, but can have only one phone to simplify this conversation)
    Field Mappings from Logical Table to Physical Table are:
    Dim - Customer
    Customer Id - CUSTOMER
    Customer Name - CUSTOMER
    Customer Address - CUSTOMER_ADDRESS
    Customer Phone - CUSTOMER_PHONE
    How would you setup the logical table and LTS's for this object in the BMM knowing the following requirements?:
    1. The Address and Phone tables should only be joined in when fields from those tables are used in a report/query.
    2. Since a customer may or may not have an address or phone, the BMM table needs to be setup such that adding those fields into a query will not filter all customers that dont have data for those fields, i.e. display null if it does not exist.
    My initial approach for resolving this would be to set it up as follows:
    A single Logical Table Source: LTS_CUSTOMER
    Three Tables added to the LTS:
    CUSTOMER, CUSTOMER_ADDRESS, CUSTOMER_PHONE
    Two joins defined for the three tables:
    CUSTOMER - CUSTOMER_ADDRESS (LEFT OUTER JOIN)
    CUSTOMER - CUSTOMER_PHONE (LEFT OUTER JOIN)
    Issues/Questions:
    - The problem I have run into is that any query that uses Customer Id or Customer Name still causes a join to the CUSTOMER_ADDRESS and CUSTOMER_PHONE table even though I didn't use a field from those tables. I assume this is because OBIEE things that any query to that Logical Table using that LTS has to query it as the LTS is defined (so all three tables are joined in)
    - Is there a way around this? If so, is it to specify separate LTS tables for the Logical Table Dim - Customer? If you do this, then there is no way to specify a LEFT OUTER JOIN and the query will just default to what is specified in the Physical Layer as an inner join.
    - Curious as to what peoples thoughts are in general for how to decide whether to specifiy multiple sources in a single LTS or just add multiple sources to the Logical Table and the decision criteria for going either way.
    Thanks in advance.
    K
    Edited by: user_K on Jun 3, 2010 11:09 AM
    Edited by: user_K on Jun 3, 2010 11:10 AM

    Thanks a lot for the example, that fixed the problem.
    I've been reading the NSAPI programmers guide several times now and I was under the impression that you should either use <object> or <client>, never thought about this approach. Now when I re-read it is makes sense, but wasn't very clear at first.
    I think I'll e-mail Sun to suggest an addition of the <Object> tag in their <Client> tag example (http://docs.sun.com/source/817-6252/npgobjcn.html#wp1045056) to make things a little more clear.
    Thanks again, now I can finally implement the final configuration settings and plan for the actual switch later this evening.

  • XSLT in bpel (soa suite 11.1.1.3.0): cannot create multi source xslt

    Hi,
    first of all I've read this:
    http://blogs.oracle.com/soa_how_to/2010/04/how_to_implement_multi-source_xslt_mapping_in_11g_bpel.html
    My problem is quite different:
    when I try to create a multisource XSLT, I receive this error:
    "Source parts of variables are either simple type or complex type, thus can not be used to create mapper file".
    What does that mean and how can I bypass this ?

    You can try defining a wsdl message type which holds all the simple types under a root element. Define a bpel variable of this message type and populate the various fields of this variable, instead of storing it under multiple bpel variables. Try to pass this variable to the xslt.

Maybe you are looking for